How to use PCI-CAN LS (low speed can bus card) with hi speed devices

I'm having problems connecting the low speed card to the hi speed devices: I've setup the bus with 120 ohms resistors terminating it. The devices seem to be working fine but the can card doesn´t seem to receive or send anything. It has rth and rtl of 510ohms. The card and devices are at 125kbps. I ran the card diagnostics and it passed them. Is it really possible to use this low speed card with a hi speed bus? Don't I have to do something special for it to work on hi speed bus? Any sugestion is highly appreciated! thank you

Hello Danut,
I was able to set up a Low Speed CAN card to talk to a High speed port on another computer( simulating a high speed device). I did not have any termination resistors on the cable. Initially, I saw the same Comm errors you mentioned and this was because the cable I was using was internally terminated. So please check that the cables are not terminated. Also , verify that the high speed device itself is not terminated ( measure the resistance between CAN_H and CAN_L, with the cable connected and without the cable).
Let me know if you were able to get the system up and running. Also do you have any low speed devices that can be used to test teh CAN card with?

Similar Messages

  • Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes? Both my daughters have ipods, my wife has one

    Dear All
    Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes. My daughters have a different generation 'nano' each & my wife a 'shuffle'?
    Many thanks

    Click here for options.
    (69081)

  • We have a corporate iPad in our auto showroom to show guests how to use features on their vehicles. Someone locked it with their account. It was not an employee. How can I get in? I did a restore of the software already?

    We have a corporate iPad in our auto showroom to show guests how to use features on their vehicles. Someone locked it with their account. It was not an employee. How can I get in? I did a restore of the software already?

    Gather up the proof that the dealership is the original purchaser of the iPad,
    and take the iPad & that proof to a physical Apple store for possible assistance.
    It is highly suggested that you make a genius bar appointment to avoid delay
    at the store:
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    If no Apple store close by, get the information mentioned above and contact
    Apple Contact Us for assistance.
    Once the problem is resolved, you may wish it use Guided Access to limit
    what customers can do with the iPad.
         iOS: About Guided Access - Apple Support

  • I found a page with a long list of short videos to wathc on how to use my new mac, now I can't find it anywhere--anybody know where this is?

    I found a page with a long list of short videos on how to use my new imac, now I can't remember how I got there--anyone know where i can find?

    Assuming Safari, CMD+OPT+2 brings up history.

  • I'm looking into how apps use the cloud. Would you consider any app with social media access as uploading information to the cloud? e.g. being able to tweet through an app is the same as uploading data to the cloud

    I'm looking into how apps use the cloud. Would you consider any app with social media access as uploading information to the cloud? e.g. being able to tweet through an app is the same as uploading data to the cloud

    Most of us in this forum are users who volunteer on technical issues, and not Adobe employees although they do drop in from time to time. As users we simply have no control over activation and that's why you are not getting responses.
    If you havn't done so,you might try the Muse forums and see if you can get a staff member to look into it. Have your case numbers and phone transcripts handy.
    Last option is to keep calling customer service until you get someone who will help or ask for a supervisor.
    Hope this get resolved,
    Gene

  • How to use airport time capsule on a dell portable pc with windows 7 taking in consideration that Time machine doesn't run with Windows ?

    how to use airport time capsule on a dell portable pc with windows 7 taking in consideration that time machine doesn't run with Windows ?

    TM does not work like that.
    If you want files to use later.. do not use TM.
    Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
    Read some details of how TM works so you understand what it will do.
    http://pondini.org/TM/Works.html
    Use a clone or different software for a permanent backup.
    http://pondini.org/TM/Clones.html
    How to use TC
    http://pondini.org/TM/Time_Capsule.html
    This is helpful.. particularly Q3.
    Why you don't want to use TM.
    Q20 here. http://pondini.org/TM/FAQ.html

  • How can I connect Bluetooth in iPad retina with non apple devices ?

    How can I connect Bluetooth in iPad retina with non apple devices ?

    What devices?
    The iPad can only pair with earphones, speakers and keyboards.
    It cannot directly pair with other phones or computers for file transfer or other operations.
    Most Bluetooth devices will have a user guide to connect them to other devices. follow that to start the process.
    From the iPad side, its just a matter of going inot Settings->BlueTooth turning it on, and searching for the device to pair. 

  • Hey there! well i from india and i m facing problem connecting my debit card to the itune store ,as the very option is not there, can someone guide me how to get it connected , i have a mastercard debit card with me .please help me

    hey there! well i from india and i m facing problem connecting my debit card to the itune store ,as the very option is not there, can someone guide me how to get it connected , i have a mastercard debit card with me .please help me

    if you are signed in to iTunes with your AppleID, click on the AppleID > view account > payment information > enter in your information

  • HOW DO use the Mikey 2.0 iPod and iPhone Microphone with my IPHONE4

    HOW DO use the Mikey 2.0 iPod and iPhone Microphone with my IPHONE4

    Did the microphone come with a user manual? You might contact support for the microphone.
    Just so you know the iPhone 4 has a built-in microphone

  • How to use stored procedures in DIAdem and Can the stored procedures be used to return values?

    Can anyone please tell me how to use stored procedures in diadem and to return values from it. Its really important, can you please answer it at the earliest.
    Thanks In advance
    spiya

    Hi Spria,
    I'm very sorry for the mix-up, I thought Allen was going to answer you back with the particulars that we found out. Check out the attached Word document and the below tidbits:
    The built-in DIAdem ODBC functions {SQL_...()} can only call stored functions, which return a scaler result {found then in SQL_Result(1,1)}. The syntax for this with an ORACLE db is
    "select function(parameters) from package"
    ...where package defaults to "dual" if you don't use your own package.
    There might be exceptions to that though, and the syntax will be different for other databases. Note that stored ORACLE procedures can NOT be called from the ODBC functions, instead you must use either ADO function calls in the DIA
    dem VBScript or the OO4O COM wrapper that ORACLE provides (this is described in further detail in the below Word document).
    Hope this helps,
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments
    Attachments:
    Calling_ORACLE_Stored_Procedures_from_DIAdem.doc ‏28 KB

  • How to use pci 6229 to generate a sine wave?

    Dear friends,
    I want to use pci 6229 to continuously generate a sine wave by 5000 sampling rate to output to drive a loudspeaker.
    Does any one can post an example so that I can learn from it?
    Many Thanks
    Probiee

    Dear Denis,
    Thank you for your reply. I have done with this following vi. please see the attachment.
    please give me some feedback with my vi.
    Many Thanks
    Probiee
    Attachments:
    danforum.JPG ‏119 KB

  • How can I share only a specific playlist with another family device?

    I purchased an iPod Touch for my Dad for Christmas.  I am trying to share only a selected playlist with the new device without synching everything that I have on my iPhone and iPad to his device.  I have turned on home sharing but can't figure out how to limit the automatic sync that kicks off when I plug the new iPod into my PC.  Any suggestions?

    Hello roaminggnome
    Unfortunately the support is down at the moment, I will have a better look later. I did go though the Apple support previously, however I found nothing that worked.
    The first thread I came across was “Home Sharing” however no mater what I did, it did not appear in the iTunes sharing list (I did go though the “Show Sharing Networks” support as well)
    Secondly, I saw “Using A Single Library With Multiple Accounts On The Same PC” (Something like that) but all this did was let us share the same music location, if I was to rip extra music, it will not show in there library
    Matt

  • How to use Crossbow Xmesh WSN LabVIEW drivers for downstream communication with motes

    Hello,
    I am trying to use LabVIEW Crossbow Xmesh WSN  driver for downstreaming commands but driver programs are not working.
    I am interested in changing node (Iris mote with MDA300 board) update rate from LabVIEW program running on host PC .
           I have  used  Set node update rate.vi  with  open stream.vi and start stream.vi  in proper sequence and developed a program to change node update rate. When program is run no error is shown but node update rate is not changed.
          Pl suggest what I should I do.
    What is the function of  WSN write VIs (WSN write Raw 1sensor1point). For what type of message this is used. 
    I  want to actuate relay on MDA300 with mote id 2. What VIs (from driver ) I have to use and how to issue command related to it.
    Incase any one can help I will be grateful
    Roop 

    Hi Arjun,
    I am sending you snap shot of VI developed to change node update rate.and also the heirarchy of drivers  VIs used in the program for  better understanding .
    In case you can figure out why the command  message send  is unable to communicate with mote .
    Also for downstream communication with motes the packet format used is described in Moteworks user manual from MiMSic.com
    I think the developer of these drivers can help you  out in solving my problem.
    Thanks
     Roop
    Attachments:
    sreenshot to arjun ni for checking downstream comm.doc ‏288 KB

  • How can I write to an SD card with my iPad 3?

    How can I write to an SD card/thumb drive with my iPad 3?

    Sorry to post this question before realizing others already did. HOWEVER! Why would Apple make such a cool device like the iPad without the abiity to write to an SD card?

  • Can I purchase a iTunes gift card with a Apple Store gift card?

    I purchased an apple store gift card instead of an iTunes gift card. Is there a way for me to purchase an iTunes gift card with the an Apple Store gift card?

    From what I see and from my experiment in the U.S, online Apple Store, I would say that yes you can. iTunes gift cards are sold in the Apple Online store and Apple Store gift cards are an accepted form of payment on the store, so that means to me that it is possible.
    Accepted forms of payment.
    http://store.apple.com/us/help/payments
    Read the accepted forms of payment in the lower right corner of this website.
    http://store.apple.com/us/cart

Maybe you are looking for

  • Using a Skype Number on Multiple Devices

    I want to get a Skype number. I currently use Skype on my desktop and laptop computers. I will add the Skype Android app to my mobile phone. When I buy the Skype number, can I use it on all 3 devices or do I need a separate number for each device? Th

  • How can I set up dynamic parameters in a CMC schedule?

    Just need some help to set-up a month-end schedule in CMC (Central Management Console ). The schedule will contain a number on Crystal reports. These report should be run for the month just gone. eg If the schedule is run on 30.09.14, I'd like the FR

  • Can't partition with disk utility. Options greyed out

    Hi, Bought a used 4 TB Seagate drive, formatted it , checked the speed 150 MB/s read/write and made a partition. Apparently it worked perfect. However after this first partition the drive is behaving erratically. I can not modify partitions anymore n

  • Replacing my iBook G4 with Airbook

    I'm finally replacing my iBook G4 with an Air Seeking recommendations from community as to product and options ( memory, graphics, etc) for me: Attributes I would like 1. Small design ( small screen ok) 2. Residential work - email, up to 10 websites

  • Sun E250 blank Screen... Need help

    Hi everyone, Currently I have moved my E250 server back from my customer site. It was working last week and now when I tried to power up it does not reach the Open Boot prompt. I will start with the LED light located on the front panel. Only the gree