How to use Phase Indicator?
Hi All.
How to use Phase Indicator? Thank you in advance.
Hi,
Please find the code snippet below.
I have explained in detail about the different phase indicator as and when they come up.
Types (ty_)
TYPES:
BEGIN OF ty_severity_list,
severe TYPE ccihe_severe,
severetxt TYPE ccihe_severetxt,
END OF ty_severity_list,
BEGIN OF ty_input,
severe TYPE ccihe_severe,
END OF ty_input,
Local objects (lo_)
DATA: lo_nd_record_risk TYPE REF TO if_wd_context_node,
lo_el_record_risk TYPE REF TO if_wd_context_element.
Local tables (lt_)
DATA: lt_severity_list TYPE STANDARD TABLE OF ty_severity_list,
lt_column_texts TYPE wdr_name_value_list,
Local structures (ls_)
ls_severity_list TYPE ty_severity_list,
ls_text TYPE wdr_name_value,
ls_record_risk TYPE wd_this->element_record_risk,
Local variables (lv_)
lv_window_title TYPE string,
lv_zzsevere LIKE ls_record_risk-zzsevere,
lv_zzseveretxt LIKE ls_record_risk-zzseveretxt.
field symbols(fs_)
FIELD-SYMBOLS: <fs_selection> TYPE ty_severity_list.
navigate from <CONTEXT> to <RECORD_RISK> via lead selection
lo_nd_record_risk = wd_context->get_child_node( name = wd_this->wdctx_record_risk ).
get element via lead selection
lo_el_record_risk = lo_nd_record_risk->get_element( ).
CASE ovs_callback_object->phase_indicator.
WHEN if_wd_ovs=>co_phase_0. "configuration phase, may be omitted
*Here you set
*The window title, the heading, or the column heading of the output table displayed *** hit list
*We can also set the selectability property, Basically the number of records that can be selected.
ls_text-name = `SEVERE`. "must match a field name of search
ls_text-value = wd_assist->if_wd_component_assistance~get_text( key = '010' ).
INSERT ls_text INTO TABLE lt_column_texts.
ls_text-name = `SEVERETXT`. "must match a field in list structure
ls_text-value = wd_assist->if_wd_component_assistance~get_text( key = '011' ).
INSERT ls_text INTO TABLE lt_column_texts.
lv_window_title = wd_assist->if_wd_component_assistance~get_text( key = '012' ).
ovs_callback_object->set_configuration(
column_texts = lt_column_texts
window_title = lv_window_title
col_count = 2
row_count = 10 ).
WHEN if_wd_ovs=>co_phase_1.
*This section is optional.
*This is to set the Selection view of the OVS component and default values on the screen.
*Here you can define the fields using which we can be used for further restricting the hitlist.
*The method SET_INPUT_STRUCTURE is provided for this purpose. If this not called, then the hitlist is displayed immediately.
ls_input-severe = '1'.
ovs_callback_object->set_input_structure( ls_input ).
*If the above method is called in some other phases then it would raise an error message.
WHEN if_wd_ovs=>co_phase_2.
*In this phase we can fetch the records to build the hitlist. The restrictions entered on the screen defined in phase 1 can be fetched from instance attribute QUERY_PARAMETERS of the event *parameter OVS_CALLBACK_OBJECT. Use method SET_OUTPUT_TABLE of the event parameter OVS_CALLBACK_OBJECT.
SELECT a~severe
b~severetxt
INTO CORRESPONDING FIELDS OF TABLE lt_severity_list
FROM ccihc_sv AS a INNER JOIN
ccihc_svtxt AS b ON asevere EQ bsevere
WHERE aratingcat EQ bratingcat AND
a~ratingcat = 'ZAN' AND
b~langu = sy-langu.
ovs_callback_object->set_output_table( output = lt_severity_list ).
WHEN if_wd_ovs=>co_phase_3.
*The result of the search was displayed in the results view of the OVS component and when user selects a record(s) on the hitlist displayed. The cursor comes to this phase and the selected *values can be fetched by reading the instance attribute SELECTION of the result parameter OVS_CALLBACK_OBJECT.
ASSIGN ovs_callback_object->selection->* TO <fs_selection>.
IF <fs_selection> IS ASSIGNED.
lv_zzsevere = <fs_selection>-severe.
lv_zzseveretxt = <fs_selection>-severetxt.
get single attribute
lo_el_record_risk->set_attribute( name = `ZZSEVERE`
value = lv_zzsevere ).
get single attribute
lo_el_record_risk->set_attribute( name = `ZZSEVERETXT`
value = lv_zzseveretxt ).
ENDIF.
ENDCASE.
Do let me know in case you need any more details.
Regards,
Sravan Varagani
Similar Messages
-
Use BAM in ALBPM --- How to use "Business Indicator variable" ?
In ALBPM60_Studio_ReferenceGuide.pdf, there is text like that:
Using Variables in BAM
When creating a Project variable, you can define it as a Business Indicator variable. This allows the variable to be stored in BAM the database.
When you add Business Indicator variable to your process, a column is added to the following BAM database tables:Workload, Task Performance and Process Performance. The name of this column is the Business Indicator name preceded by the prefix "V_".
If you define a business dimension, the workload table contains one row for each possible value of this business dimension present in the process. Each of this rows will show the quantity of instances that match that business dimension.
When you define a measurement business variable the sum of this variable's value for all in flight is stored into workload table. If business dimensions were defined as well, then this sum will be divided into as many rows as business dimension values present in flight instances.
Task performance table stores one row for each instance that completes an activity. Each of these rows contains the value of dimensions and measurements at the time the instance completed the activity.
In a similar way, process performance table stores one row for each instance that gets to the end activity. Each of these rows contains the value of dimensions and measurements at the time the instance completed the whole process.
QUESTION:
1. What's meaning is that writed in bold italic? (Can anybody give me a samaple?)
2. How to use Range of Business Indicator variable?(When I set range in my sample,this varible can't save into BAM_WORKLOAD, BAM_TASKPERFORMANCE, BAM_PROCESSPERFORMANCE)
Edited by just9doit at 01/15/2008 10:18 PMHi Saket,
Check the Tcode - BUPA_DEL. -
How to use ssrs indicator based on expression ??
Hii all
I have a condition to show my data
like =iif(count(fields.file.value)>0,"yes","")
in place of this i want to place a green tick indicator to display count
how can i use indicator it in textbox ??
guide me ...
Dilip Patil..Hi ,
Instead of the text box you can use the Indicator control itself. Still if you would like to use the text box , the only way i could think of changing the background image of the text box based on the above expression.
Best Regards Sorna -
How to use asterisk indicator in footnote
Hello All,
I want to use asterisk indicator instead of Arabic numbers in footnotes, so I changed the footnote number format to the symbol format indicator *, but the asterisk does not increment so that the first
footnote would be displayed as * blah blah, second footnote would be ** blah blah, and third footnote would be *** blah blah. How can I use only the asterisk symbol indicator and also let it increment for each footnote? I am seeking your assistance with
this. Here is a sample of what I am trying to achieve. Thanks for your help.
* Term of office expires on 18 June 2007.
** Term of office expires on 18 June 2008.
*** Term of office expires on 18 June 2009.Hi,
I'm afraid we don't have such a built-in feature/setting to do this in Word. Actually, you can do this manually. This won't take too much effort if you don't have a giant number of footnotes to be inserted.
When you want to insert a footnote, you can click the Footnotes
Dialog Box Launcher, type any number of asterisk indicators you want into
Custom mark textbox, then click Insert.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
How to use progress indicator which block the user for editing ?
Hi All,
I have a requirement where i need to show a round progress bar while processing to the database.For example :- I have a bounded taskflow and inside it I have a two jspx page called as "First.jspx" and "Second.jspx".And i have two textboxes and one "Save" button on first.jspx page.
Now when user puts the values in the textboxes and hits the "Save" button , my ticker or progress indicator should say "Please wait while processing" and as soon as the transaction is complete , i need to show another page which is "Second.jspx" page. "Save" button action has method inside a managed bean which has some functionality and then it executes the VO(View Object) and commits the data.
How should i implement the indicator?
I have read this article :- http://www.oracle.com/technetwork/developer-tools/adf/learnmore/42-progressbarcolor-169184.pdf but it doesn't fit to my requirement.I need indicator which holds the user to edit anything on the page.Like what we get when we do any transaction in banks while navigating to payment gateway.
Please suggest!!!
Thanks and Regards,
ShahHi Shah,
The answer was around the same are that you were looking into. http://www.oracle.com/technetwork/developer-tools/adf/learnmore/27-long-running-queries-169166.pdf but the sample was the 27.
- Juan Camilo -
Hi how to use phase listener in jsf
hi
i have a scenariao were the data have to fetched form database before the page gets loaded . so i came abt phase listeners . so can anybody give some example for phase listener.....
thanksThis is just basic Java knowledge, but anyway ..public class SomeClass {
static {
// static initialization block, this is executed only once per runtime, before the first instantiation.
// Initialization block, this is executed before the constructor on every instantiation.
public SomeClass() {
// the constructor, this is executed on every instantiation.
} -
How to setup exclusion indicator in price?
who could give me a example about how to use exclusion indicator in price?
That is to say how to cause different result according to different indicator value.
what are needed to setup step by step?Hi
Exclusion indicator in condition technique controls whether the system stops searching for a record after the first successful access for a condition type within an access sequence.
Condition exclusion indicator -
How do i drag indicator control type on WPF instead of using Drag and Drop points
In my WPF application, i have a window which is docked with the screen. i want to automate to expand the window using an Indicator control type, by sliding it. As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs
in many other screens.
Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points.Hi Pavithra,
>> As of now i use StartDrag and StopDrag using specific points, which is not correct when it runs in many other screens.
To really understanding this issue, could you share us what you mean by ”which is not correct”? It would be much helpful if you could share us a screen shoot about your UI and your issue.
>> Could you please let me know, is there way to slide the control (to set window display size to viewable) without using drag and drop action using points
Do you mean that the control of the WPF is invisible and you want to set the window display size to make it visible? If so, I think you could use the Mouse.MoveScrollWheel Method to change the windows view until the control is visible. The link below might
be useful to you:
# CodedUI cann't find the controls outside the screen view, Mouse.MoveScrollWheel doesn't work too
https://social.msdn.microsoft.com/Forums/vstudio/en-US/e1dba9ee-dc51-4160-9a1a-a2220c903db0/codedui-cannt-find-the-controls-outside-the-screen-view-mousemovescrollwheel-doesnt-work-too?forum=vstest
If I misunderstood you, please feel free to let me know.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
How to use abap debugger and se80
can any body give easy deatils about it?
Hi
Debugger
This section of the ABAP Workbench documentation provides information on how to use the Debugger as a test tool for finding errors in the source code of an ABAP program.
Functional Overview
Use
The ABAP Debugger is an integrated test tool within the ABAP Workbench. You use it to check the program logic and to find errors in the source code of an ABAP program. In the Debugger, you can step through the source code of a program. The running program is interrupted after each step, allowing you to check its processing logic and the results of individual statements.
As of Release 6.10, you can also run Business Server Pages (BSP) in the debugging mode. You can also display and set breakpoints here. Business Server Pages can be displayed in the Object Navigator when you select an appropriate application under BSP Application.
Features
The Debugger provides an efficient means of identifying errors in ABAP programs. It contains the following functions:
Ways of starting the Debugger
Choosing different views
Choosing different execution options in the Debugger
Displaying source code in the Debugger
Setting and deleting breakpoints
Setting and deleting watchpoints
Stopping a program at a particular statement or event
Displaying and changing field contents at runtime
Displaying ABAP Objects and references
Displaying and positioning strings
Setting and deleting database locks
Opening the ABAP Editor, or Object Navigator
System settings and runtime warnings
Starting the Debugger
There are two possible strategies for starting the Debugger in the ABAP Workbench:
By setting breakpoints then running the program
By running the program in debugging mode.
Setting Breakpoints
A breakpoint is a signal in a specific line of the program source code. This signal indicates to the ABAP runtime processor to stop the program at the relevant line and start the ABAP Debugger. A distinction is made between static and dynamic breakpoints. For further information about the different types of breakpoints and how to use them, refer to Breakpoints.
Direct Processing
You can start the Debugger without previously having set breakpoints. This is the best procedure to use when you want to test a program right from the beginning. It is also a useful procedure if you are not overly familiar with the program and therefore are not sure where best to set breakpoints. You can start the Debugger as follows:
From the Object Navigator
Select a report or transaction and choose Program ® Test ® Debugging.
From the ABAP Editor
Choose Program ® Execute ® Debugging (or the Debugging pushbutton).
From any screen
Choose System ® Utilities ® Debug ABAP.
From any screen
Enter /h in the command field.
Display Modes in the Debugger
When you are debugging a program, there are various display modes that you can use. All of the display modes have the same structure. The top part of the screen displays an extract of the program source code. The bottom part displays the information specifically available in that display mode. There are also pushbuttons on the screen allowing you to switch to the most frequently-used display modes.
Display Modes Available Using Pushbuttons
Fields
The scrollable field display contains the contents of up to eight fields. The contents of the three most important system fields are always displayed. This is the default display mode in the Debugger. See also Processing Fields
Table
Displays the contents of an internal table. This mode allows you to display and edit the entries in an internal table. See also Processing Internal Tables
Breakpoints
A scrollable display containing up to 30 breakpoints. Next to each breakpoint is a counter. You can also delete breakpoints in this display. See also Managing Dynamic Breakpoints
Watchpoints
You can set a watchpoint for a field so that the program is interrupted whenever the value of that field changes. This display mode contains a list of watchpoints, the fields and programs to which they are assigned, the current values of the fields, and the conditions upon which the watchpoint is activated. See also Setting Watchpoints
Calls
This mode displays the current sequence of events, and the sequence of calls up to the current breakpoint. The last active call is displayed at the top of the list; previous calls are listed in reverse chronological order. When an event (for example, START-OF-SELECTION) concludes, it is deleted from the display.
Overview
This mode displays the structure of the program. It lists its events, subroutines, and modules, and shows which sections belong to which events. It also displays the section currently being processed.
Settings
This mode displays the current Debugger settings. You can change the settings by selecting or deselecting various options. For further information, refer to Settings and Warnings
Other Display Modes
You can access other display modes by choosing Goto ® Display data object.
Single field
Displays the contents and technical attributes of a field.
Structured
field
Displays the components of a structure, along with their contents and attributes. If you double-click a component, the system displays detailed information for it.
Strings
Display the content and current length of the string. You can also display part of the content by means of offset and length.
Internal table
Displays the type, line numbers and contents of an internal table.
Object
Displays the structure of an ABAP Object.
For further information on these displays, refer to Displaying Attributes and Displaying ABAP Objects
Checking System Programs for Errors
To check a program or program component that is part of the ABAP Workbench (for example, the Screen Painter), you must use the system Debugger. To start the system Debugger, choose System ® Utilities ® Debug System from any screen. To stop the system Debugger, choose Debugger ® Debugging off.
Displaying Program Attributes
You can display the attributes Fixed Point Arithmetic, System Program, and Unicode Checks of the program that has just been executed by choosing Goto ® Further Information ® Program Attributes.
Restarting the Debugger
If you choose Debugging ® Restart, debugging mode is stopped and the system takes you to the initial screen of the last transaction you called. If, for example, you started an ABAP program in debugging mode from transaction SE38 (ABAP Editor), choosing Debugging ® Restart will take you back to the screen titled ABAP Editor: Initial Screen. If you want to restart the program in debugging mode, choose Debugging.
Breakpoints
Apart from direct execution of an ABAP program in the Debugger, it is also possible to start the Debugger call by the exact setting of a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statement
The Debugger stops the program directly before the specified statement is executed.
Breakpoints
at subroutine
The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module
The Debugger stops the program directly before the specified function module is called.
Breakpoint at method
The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions
The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application, when the program execution is always to be interrupted at the same place. For further information, refer to Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
You do not have to change the program code
You can set them even when the program is locked by another programmer
You can define a counter that only activates the breakpoint after it has been reached
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For further information, refer to Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they are effective during the entire user session, if they are saved by choosing Breakpoints ® Save in the ABAP Debugger. For more details on the subject of sessions and user sessions, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
Breakpoints at Statements
You can use this special kind of dynamic breakpoint to interrupt a program directly before an ABAP statement is processed.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at an ABAP statement:
1.Choose Breakpoint ® Breakpoint at ® Statement...
The following dialog box appears:
2.Enter the ABAP statement.
The system sets a breakpoint at all points in the program at which the ABAP statement occurs.
3.Choose ENTER.
The breakpoint applies to all lines containing the specified statement.
Result
The system confirms the breakpoint and adds it to the list in the display. When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Breakpoints at Subroutines
You can use this special kind of dynamic breakpoint to interrupt a program directly before a subroutine is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a subroutine:
Choose Breakpoint ® Breakpoint at ® Event/Subroutine.
The following dialog box then appears:
Enter the name of the subroutine before which you want to interrupt the program. By default, the Program field contains the name of the program that is currently active. The system sets a breakpoint wherever the specified subroutine occurs in the program code.
Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
Breakpoints at Function Module
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
Choose Breakpoint ® Breakpoint at ® Function module...
The following dialog box appears:
Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at Methods
You can use this special kind of dynamic breakpoint to interrupt a program directly before a method is called.
Prerequisites
You must be already running the program in the debugger.
Procedure
To set a breakpoint for methods:
1. Choose Breakpoint ® Breakpoint at ® Method...
The following dialog box then appears:
2. Enter the name of the method and class before which you want to interrupt the program. A breakpoint is then set each time the specified processing block appears in the source code.
3. Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the list in the display.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint ® Breakpoint at ® System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities ® Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
Position the cursor on the line of the source code at which you want to set the breakpoint.
Choose Utilities ® Breakpoints ® Set or the Stop icon. The system confirms that the breakpoint has been set.
To display a list of all dynamic breakpoints in a program, choose Utilities ® Breakpoints ® Display. You can use this list to navigate to a particular breakpoint or to delete one or more breakpoints from the program.
Setting Dynamic Breakpoints in Debugging Mode
To set a dynamic breakpoint in the Debugger:
Position the cursor on the line in which you want to set the breakpoint.
Select the line by double-clicking it or choosing Breakpoint ® Set/delete.
The system sets the breakpoint, and displays a small stop sign to the left of the relevant line. If the line already contained a breakpoint, it is deleted.
When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint ® Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
By choosing Breakpoint ® Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto ® Control debugging ® Breakpoints.
Example
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint ® Set/delete. To delete all breakpoints, choose Breakpoint ® Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint ® Activate/deactivate.
Watchpoints
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
You can set up to five watchpoints in a program.
See also Setting Watchpoints.
You can also specify the conditions on which a watchpoint is to become active.
You can specify logical conditions between up to five conditional watchpoints.
See Specifying a Logical Expression.
You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in the specified program.
You can change and delete watchpoints.
See Changing Watchpoints.
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Setting Watchpoints
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
A watchpoint can be either local or global. Local watchpoints are only valid in the specified program. Global watchpoints are valid in the specified program, and also in all the other programs it calls.
Procedure
To set a watchpoint, start the Debugger and proceed as follows:
Choose Breakpoint ® Create watchpoint or the corresponding pushbutton. The Create Watchpoint dialog box appears:
Decide whether you want to set a local or global watchpoint.
Enter the program and the name of the field for which you want to set the watchpoint. In the Program field, the name of the program currently running is always defaulted.
If you want your watchpoint to be activated each time the contents of the field change, the definition is now complete, and you can return to the Debugger by pressing ENTER .
To create a conditional watchpoint, that is only activated when a particular situation arises, choose one of the following relational operators.
Operator
Meaning
<
Less than
<=
Less than or equal
=
Equal
<>
Not equal
=
Greater than or equal
Greater than
You can use the Comparison field option to specify whether the comparison is to be carried out with a value that you specify or with the contents of another field. Depending on your choice from step 6, enter a value or a field for the comparison.
Result
The system confirms the watchpoint and adds it to the list in the display. When you finish your debugging session, the watchpoint is automatically deleted unless you have explicitly saved it.
Specifying Logical Links
If you have more than one conditional watchpoint, you can specify a logical link between them:
OR
Only one of the specified conditions must be met
AND
All of the conditions must be met.
Changing Watchpoints
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list. The following dialog box appears:
Choose the pencil icon in the line containing the watchpoint you want to change.
Change the watchpoint attributes in the Create/Change Watchpoint.
Choose ENTER .
Deleting Watchpoints
You cannot delete watchpoints by choosing Breakpoint ® Delete or Breakpoint ® Deactivate/activate. Instead, proceed as follows:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list.
Choose the trashcan icon in the line containing the watchpoint you want to delete.
Memory Monitoring with Watchpoints
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables. By placing an ampersand (&) in front of the object name, you can display the reference in question in hexadecimal format. With internal tables, you can also display the table header by placing an asterisk (*) at the beginning of the name.
&objectname
Displays the references of strings, internal tables as well as data and object references
*itab
Displays the table header of the internal table itab
Example
If a watchpoint is set for the object in question at runtime, the program is stopped as soon as the reference is changed. A short dump can be intercepted in this way to stop the program being terminated when the memory is overwritten.
Analyzing Source Code
The Debugger contains an extensive range of functions that help you to analyze the source code of a program. You can step through the source code of a program in four different ways. For further information, refer to Stepping Through the Source Code
For information about functions within the source code display, see Displaying the Source Code
There are also different display modes that provide various information and display the contents of individual fields, tables, and so on: -
How can I opearate indicator outside while loop?
I do small program, I have many while loops and I want to connect wire (in my application) from each loop to AND gate then to another while loop, but how can I operate these wires to agree with the change of my application inside while loops.
If not clear :
In another words, suppose I want to operate indicator ouside the while loop. How can I operate indicator outside while loop, so when my application become TRUE (inside while loop) the indicator will be ON (outside while loop) and when my application become FALSE(inside while loop) the indicator will be OFF (outside while loop).
Help me if you have any idea please..........................Hi Rammo,
For the wire to carry the boolean condition from the while loop to an 'and' gate outside, the while loop must stop running
If you want the while loop to keep on running and still pass a boolean value to a destination outside the while loop, use any one of these: property nodes, global or local variables.
i am still not clear as to what you intend to say by this sentence
" I want the wire that comes out from the while loop will become TRUE if it in my application is TRUE inside while loop and the opposite is true. Because I want to connect the wire that comes out from while loop to AND gate than to another application"
plz tell me if the first part of this mail of mine answers your doubt or do you need more information?
regards
Dev -
Of course going to school would be a good option, but I want to know if one-to-one is also a good way to learn how to use logic pro. Has anyone been through the one-to-one program for logic pro and can say that they learned how to use logic pro well because of it?
For sure, one to one training, if given by a tutor who is capable, will hand you the means to build up self-confidence and will therefore let you operate the hard/software in an intelligent manner, instead of going for the trial and error method which has its pro's and con's too. Once you've passed this beginners phase you will make your own decisions intelligently and then you will also start to get experience and learn even from your mistakes. Something like that in theory and the rest is up to you!
Have a nice day -
How to use Add Query Criteria for the MySQL data Base in Netbeans ?
How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
When the Query Criteria is add like
SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
FROM counselors WHERE counselors.counselors_id = ?
when i run this Query in the Query Window
i get a error message Box saying
Query Processing Error Parameter metadata not available for the given statement
if i run the Query with out Query Criteria its working fine.*I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
The Java codes are:
public void dropDown1_processValueChange(ValueChangeEvent event) {
Object s = this.dropDown1.getSelected();
try {
this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
this.Trip_tabDataProvider1.refresh();
} catch (Exception e) {
this.log("Error: ", e);
this.error("Error: Cannot select user"+e.getMessage());
SQL statement for Trip_tabRowSet:
SELECT ALL Trip_Tab.Trip_Date,
Trip_Tab.User_ID,
Trip_Tab.Destination
FROM Trip_Tab
WHERE Trip_Tab.User_ID = ?
Error messages are shown below:
phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.sql.SQLException: No value specified for parameter 1
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
Could anybody look into this issue.
Many thanks
Edited by: linqing on Nov 22, 2007 4:48 AM -
How to use the "identify" feature in new 6.3.1 airport utility?
how to use the "identify" feature in new 6.3.1 airport utility?
so you can find the basestations in larger networks?There is a workaround, which is to use Airport Utility 5.6.
I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
Four caveats:
1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
I hope this is helpful information. Took me a while to find out how to do this. -
How to use oracle collection type with JDBC?
I try to use oracle collection type in java program. So I made some package and java program, however Java program was not found "package.collectiontype"(JDBC_ERP_IF_TEST.NUM_ARRAY) . please, show me how to use this.
Java Version : Java 1.4
JDBC Driver : Oracle Oci Driver
DB: Oracle 9i
No 1. Package
===========================================
create or replace package JDBC_ERP_IF_TEST AS
type NUM_ARRAY is table of number;
procedure JDBC_ERP_IF_ARRAY_TEST(P_NUM_ARRAY IN NUM_ARRAY, ERR_NO OUT NUMBER, ERR_TEXT OUT VARCHAR2);
procedure TEST(ABC IN NUMBER);
END JDBC_ERP_IF_TEST;
==================================================
No 2. Package Body
===============================================
CREATE OR REPLACE package BODY JDBC_ERP_IF_TEST is
procedure JDBC_ERP_IF_ARRAY_TEST(p_num_array IN NUM_ARRAY,
ERR_NO OUT NUMBER,
ERR_TEXT OUT VARCHAR2) is
begin
ERR_NO := 0;
ERR_TEXT := '';
dbms_output.enable;
for i in 1 .. p_num_array.count() loop
dbms_output.put_line(p_num_array(i));
insert into emp (empno) values (p_num_array(i));
commit;
end loop;
EXCEPTION
WHEN OTHERS THEN
ERR_NO := SQLCODE;
ERR_TEXT := ERR_TEXT ||
' IN JDBC INTERFACE TEST FOR ORACLE ERP OPEN API..';
ROLLBACK;
RETURN;
end JDBC_ERP_IF_ARRAY_TEST;
procedure TEST(ABC IN NUMBER) IS
begin
insert into emp(empno) values (ABC);
commit;
end TEST;
end JDBC_ERP_IF_TEST;
===============================================
NO 3. Java Program
===============================================
ArrayDescriptor descriptor = ArrayDescriptor.createDescriptor("JDBC_ERP_IF_TEST.NUM_ARRAY", getConnection());
ARRAY array = new ARRAY(descriptor, getConnection(), arrs);
cstmt = getConnection().prepareCall(LQueryFactory.getInstance().get("Meta/Basic/testJdbcErpArrayIf").getSql());
cstmt.setArray(1, array);
cstmt.registerOutParameter(2, Types.INTEGER);
cstmt.registerOutParameter(3, Types.VARCHAR);
====================================================
couldn't find this phase => JDBC_ERP_IF_TEST.NUM_ARRAY
what can i do for this package and program? please help me..Something like this:
create or replace type t_record as object (
id number,
no number
CREATE or replace type t_table AS TABLE OF t_record;
set serveroutput on
declare
v_table t_table := t_table();
v_t1 t_table := t_table();
begin
v_table.extend(1);
v_table(1).ID := 1;
v_table(1).No := 10;
v_table.extend(1);
v_table(2).ID := 2;
v_table(2).ID := 20;
SELEC t_record (ID,NO) BULK COLLECT INTO v_t1
from TableA
FROM TABLEA
WHERE ID IN (select t.ID from table(v_Table) t);
for i in 1..v_t1.count loop
dbms_output.put_line(v_t1(i).ID);
dbms_output.put_line(v_t1(i).No);
end loop;
end;
/Untested!
P;
Edited by: bluefrog on Mar 5, 2010 5:08 PM -
How to use oracle OCIANYDATASET?
Hi, All
When I try to update oracle example "Pipelined Table Functions Example: C Implementation" to return OCIANYDATASET, but from oracle documnet, I cannot find any example about how to use OCIANYDATASET, would you please help me out of this issue, any example or advice is benefit for this issue. thanks.
The PL/SQL below works OK now:
member function ODCITableFetch(self in out StockPivotImpl, nrows in number, record_out out anydataset) return number is
rc SYS_REFCURSOR;
value pls_integer;
cur StockTable%ROWTYPE;
begin
record_out := null;
DBMS_ODCI.RestoreRefCursor(rc, self.cur_n);
if row_was_returned = 1 then
return ODCIconst.success;
end if;
row_was_returned := 1;
anydataset.begincreate(dbms_types.typecode_object, self.row_types, record_out);
loop
fetch rc into cur;
EXIT WHEN rc%NOTFOUND;
record_out.addinstance;
record_out.piecewise();
-- Setting the returned values:
record_out.setvarchar2(cur.ticker);
record_out.setnumber (cur.openprice);
record_out.setnumber (nrows);
record_out.setvarchar2('new_column');
end loop;
close rc;
record_out.endcreate;
return odciconst.success;
end;But how to implement below C function, especially how to append value into OCIAnyDataSet and return it?
-- Create table function
CREATE FUNCTION StockPivot(p refcur_pkg.refcur_t) RETURN anydataset
PIPELINED USING StockPivotImpl;
SELECT * FROM TABLE(StockPivot(CURSOR(SELECT * FROM StockTable)));
MEMBER FUNCTION ODCITableFetch(self IN OUT StockPivotImpl, nrows IN NUMBER,
record_out out anydataset) RETURN PLS_INTEGER
AS LANGUAGE C
LIBRARY StockPivotLib
NAME "ODCITableFetch"
WITH CONTEXT
PARAMETERS (
context,
self,
self INDICATOR STRUCT,
nrows,
record_out,
record_out INDICATOR,
RETURN INT
int ODCITableFetch(OCIExtProcContext* extProcCtx, StockPivotImpl* self,
StockPivotImpl_ind* self_ind, OCINumber* nrows,
OCIAnyDataSet* outSet, short* outSet_ind)Edited by: BluShadow on 11-Apr-2013 10:42
added {noformat}{noformat} tags for readability. Please read the FAQ: {message:id=9360002} and learn to do this yourself in future.Thanks for your reply, Yes, I have read the doc, but it seems like that doesn't work in my code. I'm not sure whether I missed something. My steps below:
int ODCITableFetch(OCIExtProcContext* extProcCtx, StockPivotImpl* self,
StockPivotImpl_ind* self_ind, OCINumber* nrows,
OCIAnyDataSet* outSet, short* outSet_ind)
OCIAnyData* myData = (OCIAnyData*)0;
status = OCIAnyDataSetBeginCreate(handles.svchp, handles.errhp, OCI_TYPECODE_OBJECT, (OCIType *)self->out, OCI_DURATION_SESSION, &outSet);
status = OCIAnyDataSetAddInstance(handles.svchp, handles.errhp, outSet, &myData);
//AAA
OCIStringAssignText(handles.envhp, handles.errhp, (text *)"CA", 2, &str);
checkerr(&handles, OCIAnyDataAttrSet(handles.svchp, handles.errhp, (OCIAnyData*)myData, (OCITypeCode)OCI_TYPECODE_VARCHAR2,(OCIType *)0, (dvoid *)&indp, (void*)str, sizeof(str), FALSE)); // Crashed here
//BBB
status = OCIAnyDataSetEndCreate(handles.svchp,handles.errhp, outSet);
//CCC
return ODCI_SUCCESS;
It crashed in function OCIAnyDataAttrSet(), but when I added the function OCITypeByName() and OCIAnyDataBeginCreate() in AAA and OCIAnyDataEndCreate() in BBB, no error happened again and I can get the instance in CCC with function OCIAnyDataSetGetInstance() and I also can get the value via function OCIAnyDataAttrGet() after CCC from the instance, but when I run the query, it is no rows selected, why?
Maybe you are looking for
-
Can't sync calendar, contacts, etc. in Outlook 2007
I just got a new computer and I can't figure out how to get it to sync my calendar and contacts to Outlook. I have my Outlook configured to send and receive my Yahoo mail. It was working fine until I download the Desktop Manager software. At that
-
Problem Installing BPEL Process Manager in Win2K
Hello, I am new to BPEL and especially to Oracle BPEL Process Manager. I have to write my diploma thesis about an BPEL-related topic an so I decided to try the Oracle BPEL PM. My OS is Win2K, we run Bea Weblogic 8.1.4 as an app server. I installed th
-
Cannot view all of Timeline anymore
Hello, I'm very new to Flash 8. I have a template I've been playing with that has several different sections. About us, Contact us, Services, etc. Along the way, I must have clicked on something to change my Timeline view. I can play the first part o
-
Windows 7 64 bit Home Premium DSCP value 0x00
I am trying to mark my traffic with DSCP values both with some built in options in the programs and with the Windows 7 Group Policy QOS options. I have looked around and found the two regedit items that need to be changed and have changed them. Addi
-
I have just transfered over a 1000 lbums from an external device which was in the Itunes format and they did have the cover artwork. The only cover art is for Itunes purchased albums ani suggestions.