How to use phone as a wifi adapter
i want to turn my phone in to a wireless adapter to connect my laptop and pc so as to share internet connection laptop has.
Both have windows 7
I can connect my phone to internet via laptop wifi
stevejobsfan0123 wrote:
I don't think the OP can see that option.
Nipun1987 wrote:
Its that in my settings, it doesnt show personal hotspot
I was guessing they coudn't see it on the main settings page. My experience is that it doesn't show up there until you've enabled it under Cellular. Apparently, I was correct. This time.
Similar Messages
-
How to use 45W MagSafe 2 Power Adapter with cable management MagSafe 2 power port macbook air 2013
How to use 45W MagSafe 2 Power Adapter with cable management MagSafe 2 power port macbook air 2013 there's two plugs do I use both for the safety to work or I just one ? Thanks sorry new macbook air 2013 was given to my daughter fir her 18th bday 2 days ago by my brother
No, the one is just an extension cord, just use the 45W charger with its attached thin cord and connect the magnetic magsafe to to the connector on the back left of the macbook Air for use and charging it
-
How to use phone as modem through ups cable
I think it s silly quest..but i dont knw how to use phone as modem using NOKIA pc suit software for internetwork.. i ve installed 7.1version even though pc conneced to my mobile through ups cable type CA-101D. But there s no response in pc.what can i do pls expl clearly now im usg nokia c3-01
Install latest version of Nokia suite(old pc suite). You should get connected.
In Love With My C6-01:Now running on Nokia Belle! -
How to use mobile as a wifi internet on pc...
Hello, i want to connect my laptop to internet by using my nokia e71 wifi because my have no wifi. so plz tell me how can i connect my laptop to internet by using mobile wifi?
You need to download and install the latest Ovi suite and install it on your laptop. Connect your phone to your laptop via usb or bluetooth in PC Suite mode. In Ovi suite, goto Tools > Connect to Internet. After setting your country and carrier, the suite will connect you to the internet via your phone.
Note that this will connect you using your phone carrier's network, so you will incur data costs on your phone plan.
If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers. -
Hi,
am planning to develop a live streaming app using C# and xaml.
I have gone through the below sample and am able to stream the live content using wireacst camera.
Azure Media Services Live Streaming Sample
But i want to use Phone camera to stream the live video rather using wirecast camera.
How can i use that? How to get the published URL from the C# code, is there any API to get that?
Anybody please help me
Regards,
SanthoshHello,
There are no in box components that will allow you to transmit captured video from a Windows Phone device to Azure Media Services. You will need to create you own implementation. You can do this by creating a custom Media Foundation sync that can plug into
the MediaCapture element's pipeline. You will then need to modify the captured and compressed video to align to one of the two protocols that Azure Media services can use. At this time Azure Media services can use either Smooth Streaming or RTMP for ingestion.
You will need to create your own packager (or find compatible packager code from a 3rd party) to package the MP4 encoded data into the necessary format.
Here is an example of how to create a custom Media Foundation sync (please note you must write your Media Foundation components using C++ MoCOM. We do not support Media Foundation components written in managed languages):
Real-time communication sample
I hope this helps,
James
Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/ -
My wife and I are trying to learn how to use Air Drop. The "tutorial" showed us where it is. It came up. I saw hers (Mac). She saw mine (Mac). But where to go after that is, apparently, in the cloud somewhere. The description says we can share files...which is nice...but nothing tells us HOW to share those files.
Thanks for your help out there...
Dennis1. Open a new Finder window or use one that's already open
2. Click on Airdrop, press Shift+Command+R, or find "Airdrop" in the "Go" menu
3. Drag your file to the icon of the person you want to send the file to (if you have mountain lion, you can use the share button).
4. The other person has to click "save"
5. The file will send and appear in the receiver's downloads folder
In Mountain Lion, a new feature was added: the share button. It's a button with a picture of a box and an arrow jumping out of it. Click on it and the third (and last) option is "Airdrop" and clicking on it will allow you to send files over Airdrop without opening it in Finder. -
How to use thunderbolt to gigabit ethernet adapter
hi mates. i just purchase the Thunderbolt to Gigabit Ethernet Adapter last week for my Mac Book Pro Retina. but i have no idea how it work. i tried just plug in the adapter and the LAN cable in but no luck...
Any idea how it works?Plug in the Adapter and the cable to the adapter and the other end of the cable to a switch or router then Reboot the system. Then check the Network section in System Preferences to see if the Ethernet shows up. If it does your done. If not then you have a bad adapter, a bad cable, both bad adapter and cable or the Thunderbolt port is bad.
Or at the last a corrupted install of OS X. -
Hi All,
The Actual query to perform is below.
SELECT name,number from emp WHERE CASE WHEN :1='T' AND term_date IS Not NULL THEN 1 WHEN :1='A' AND term_date IS NULL THEN 1 WHEN :1='ALL' THEN 1 ELSE 1 END = 1;
I have tried in DB adapter like below as a parameter for :1 as #vInputParam
SELECT name,number from emp WHERE CASE WHEN #vInputParam='T' AND term_date IS Not NULL THEN 1 WHEN #vInputParam='A' AND term_date IS NULL THEN 1 WHEN #vInputParam='ALL' THEN 1 ELSE 1 END = 1;
Getting Error code :17003 .java.sql.SQLException: Invalid column index error.
Please suggest me on using ':' bind character in DB adapter Select Query SOA11g.
Can someone help me on this please?
Thanks,
HariHi,
Could you please make sure your binding style(Oracle Positional,Oracle named..etc) of the Seeded VO and Custom Vo are same.
This is the option you will get when you are extending your vo. So make sure that both are same.
You can refer the below link too
VO extension leads to "Invalid column index" exception
Thanks
Bharat -
How to use phone as internet connection via usb
How do I use my iphone6 to access the web with a direct USB connection to my dell laptop.
Are you asking how to use the iPhone 6 as a hotspot for your laptop? If so, see this support document about Personal Hotspot. iOS: Understanding Personal Hotspot
-
Sending email using phone signal not wifi
Dear all,
I would appreciate any help. I have two pop email accounts set up on my iphone. When connected to wifi both send and receive emails. However when connected via O2 signal (Uk) then the accounts will only receive and not send. In stead i get an rror message about the outgoing smtp server
Can anyone help?
Thanks
JoshJosh Bear wrote:
Okay, got some progress. If I configure the outgoing server to smtp.o2.co.uk then when I am using edge or standard phone signal the the emails are sent. If I then switch to wifi then the emails will not send.
However if I change the outgoing server to smtp.ntlworld.com then the emails will send when using wifi and but not if using edge or standard phone signal.
Not great but I guess that since this is a mobile device I will keep it set to o2.
Unless anyone who is way smarter than me (not Hard) can provide a solution. I suppose I could set up duplicate accounts with all settings identical apart from the smtp server.
would that work?
Josh
Here's a solution that will work with both wifi and GPRS/EDGE connection. Use the smtp.o2.co.uk hostname for the Ougoing Server but also add your o2 username (full email address) and o2 password into the Outgoing Server fields. -
How i use header fields in soap adapter
Hi Experts,
I need use header fields http in soap adapter receiver but i don't know where's the Variable Header
Do you know where i find this?
Somebody know how i put header fields http in soap adapter receiver?
Thanks for all,It is similar like in this blog:
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Find in the online help the values for the SOAP adapter.
You can only add additional fields, you cannot influence the standard field like content-type and content-id.
Regards
Stefan -
How to use phone (GPS?) to measure points
Hi
If I had my phone such as an iphone and I wanted to measure the length of something I could put it at one end of the item, click something and put it at the other end of the thing I want measured and it would tell me the length of that object.
Is there a way I could do this using actionscript.
I was thinking gps but it that not preside enough?
Any Ideas
ThanksIf you're looking for precision then no, GPS will definitely not be enough.
I'd suggest considering some alternatives but even those are going to be quite difficult.
You have the method your own mouse uses which is snapping a low resolution picture of a surface as you move over it analyzing the picture to see how far you've moved frame to frame (requires some fairly sophisticated image analysis).
Otherwise possibly some means of snapping a photo from multiple angles while analyzing them for perspective differences which can tell you distance, but isn't user friendly and won't work unless you're close to the object (a bridge far away will barely move when you do, won't work).
Accelerometer still isn't up to snuff (you can read why in many places) but things are getting better. -
How to use phone with existing rogers plan
If I bought a second hand iphone how do I use it with my existing Rogers cell phone plan? I have one year left in the contract.
You need to activate the iPhone with your Roger's line/number.
If your existing phone includes a micro-SIM card and the second hand iPhone is an iPhone 4, you can insert that SIM card in the iPhone 4 followed by connecting the iPhone to iTunes to activate the iPhone with your line/number.
If your existing phone includes a regular size SIM card and the second hand iPhone is a 3GS or 3G, you can insert that SIM card in the iPhone and do the same with iTunes. -
How to use N900 as a WiFi modem to connect a PC to...
Hi there,
I have used the PC suite software to connect my N900 to my computer. On there, there is an option to connect to the internet via the phone but it seems that this is done only via the phone's 3.5G capability.
I was hoping that I could choose either 3.5G or the Wifi.
I have a desktop computer at home that does not have a wifi card nor is it connected to my network via a CAT5 cable. So connecting it to the phone is the only option I have. Connecting through the phone's wifi capability would be more economical than using the 3.5G subscription.
Does anyone know if one can switch between the 3G and the Wifi int eh PC Suite ?
Thanks
FredI don't think it is possible to use the N900 as a wifi adaptor
If this Post is helpful. A click on the White Kudos star is always Appreciated
Last Nokia: Nokia Lumia 800
Current Phone: A Non Nokia Device
Previous Phones:Don't Ask ;-) -
How to use Phone enrolment for an Intune account?
I have created a Microsoft Intune account and setup a signed company hub for phone devices.
But I cannot work out what information to enter into the Windows Phone 8.0 -> settings -> company apps in order to enrol the phone onto Intune. I have an Intune user called '[email protected]'. So I can log into Intune online by using this
account with the appropriate password.
But on the phone when it asks for email address I enter '[email protected]'. But it fails saying I should check the email address and server address. Should I be entering something else instead?Please try to follow the instruction mentioned in
http://www.microsoft.com/en-us/download/details.aspx?id=36174
and I think windows intune forum is more suitable for your question.
<THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
Alan Yao
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.
Maybe you are looking for
-
Device manager does not show any signs of failed hardware Server used to be the only domain controller in the network We had a power failure that resulted in the machine powering off incorrectly (3 months ago or so) Windows would not start for a mis
-
Time Syncing on a WRT54GS Wireless Router
The current time on my router keeps slipping by 15 minutes per week. I can't find any place to change the time. Changing the timezone is the only time related item on the router, but changing the timezone doesn't correct the time. Any ideas?
-
Notification from iCloud?
I just received an email from iCloud that says I have to update my account info. It wants all of my secure info. Is this legit or a scam?? Wondering if others got this email.
-
Clone Stamp Tool not cloning transparency correctly
My clone stamp tool is not cloning transparency correctly. I have looked at all opacity, flow, and blending setings. Basically, what I remember from before this problem started, is that cloning a transparent edge, or an area with some degree of tran
-
Location:f?p= appearing on the page
Hello All, I have a modal page which needs to be closed after process is executed and parent page refreshed. For this I created a branch of type PLSQL and added the below code BEGIN htp.init(); htp.p('<script>'); htp.p('var image = "wwv_flow_file_mgr