How to use phone as internet connection via usb

How do I use my iphone6 to access the web with a direct USB connection to my dell laptop.

Are you asking how to use the iPhone 6 as a hotspot for your laptop? If so, see this support document about Personal Hotspot. iOS: Understanding Personal Hotspot

Similar Messages

  • How to switch off the internet connection via GPRS by iphone 3G

    how to switch off the internet connection via GPRS by iphone 3G?
    need help.
    thanks

    Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

  • How to Share Mac Desktop Internet Connection Via Bluetooth

    I have Mac Desktop with a Internet Connection... I have also shared my Internet Connection through Bluetooth.. but How can I use that on my Curve 8520 via bluetooth.... please guide.....

    How to configure Bluetooth file transfer between a BlackBerry Smartphone and a Mac
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to use my iphone internet connection on my laptop

    How to use my apple iphone internet connection on my laptop

    Read through this article:
    http://support.apple.com/kb/HT4517

  • How to build up an internet connection via WLAN?

    I am using WLAN at home with my E90. Since I changed the provider I got a DSL modem which does not connect to internet automatically. With WIN XP the internet connection is built up manually every time I start the computer (German expression is DFÜ - like in old times with your analogue modem). Now I am missing a possibility to do the same with my E90 - is there any chance enter the user name and password to get access to internet via WLAN? Thanks - even for negative answers...

    Not that I'm aware of, I have had a good look around my E90 and the only connections you can define a user name and password for are packet data connections.

  • Problems with sharing internet connection via usb

    I have been sharing the internet connection on my iPhone 5 via usb to a PC for a few years. When updating to iOS 8.3 and iTunes to 12.1 (from iOS 6 if I remember correctly) the internet sharing through usb stopped working. Sharing through wifi works and settings are the same as when usb internet share did work. Any idea on how to solve this except downgrading?
    For my troubleshooting, has anyone been able to share internet via usb to PC (or Mac) with iOS 8 / iTunes 12.
    PS I have unliited cellular data and iPhone is my only internet connection at home,

    Mark,
    There is a excellent book that teaches you how to do this (and other things) called Mac OS X Tiger: The Missing Manual (others of course)
    If I remember correctly (book is on loan)
    1: System Preferences>Network>Show>network port configurations (click unlock)
    2: Click>Built in Firewire and drag to the top of the list (why I forget why)
    3: System Preferences>Sharing>Internet>Share your connection from: Built in Ethernet (or what your using for your connection in) >To computers using: Built in Firewire>Start
    4: Mac #2>Hook up Firewire 400 cable>System Preferences>Network>Location>New Location
    5: Show>Network Port Configurations>Drag Built in Firewire to top of list and enable.
    6: I also think you have to enable Personal Web Sharing on the Mac hosting the internet.
    anyway play with it, you'll figure it out. if someone doesn't get to you.

  • I was using a ps3 controller connected via usb as a gamepad when I had Snow Leopard installed - the other day I downloaded Mavericks and now it no longer works. Solutions?

    I moved from 10.6.8 (Snow Leopard) to 10.9 (Mavericks). Apple support won't help because it's not their hardware. It's not a playstation controller, it's Spartan brand, and it never connected via bluetooth (it continues to not connect via bluetooth in Mavericks which is fine). I always just plugged it in and it ran because apparently Apple included drivers for it from Snow Leopard onward. However, in Mavericks that's not the case, as when I plug it in nothing picks it up, and when I tried to connect it via bluetooth I would enter the pairing code and then it wouldn't pair. Anyone got any thoughts/ideas?

    Thanks for no help. Such a supportive community. I figured it out on my own. I can only connect it via usb cable (which I'm happy with) and in order to do that I had to go through the bluetooth connection steps for some reason. It doesn't show up as paired but I did the steps outlined in this video - http://www.youtube.com/watch?v=Efk77f6d98Y -, plugged the controller in via usb cable and then it worked.

  • Can't send Mail since internet connection via USB key

    I now access internet via a USB key and although I receive mail as normal into my Mac 'Mail' from my email account when on line, all mail I now try to send sits in the outbox with the following error message:
    This message could not be delivered and will remain in your Outbox until it can be delivered.
    5.7.1 service refused. Client host 80.10.46.95 blocked for spamming issues. Adresse IP source
    80.10.46.95 bloquee pour incident de spam. Ref http://r.orange.fr/r/Oassistance_adresserejetee .
    I presume since changing my way of connecting to the internet it has thrown up some server problem and I need to change something in my preferences on Mail...but what?
    Any help would be appreciated as it's driving me mad!
    Many thanks.

    Hi Han71, and a warm welcome to the forums!
    Start with these three, check SpamCop or SpamHaus to see if your IP is there...
    http://spamcop.net/bl.shtml
    http://www.spamhaus.org/lookup.lasso
    http://www.spamhaus.org/zen/
    Sometimes an ISP will bloc a whole other ISP too, if it's the source of too much SPAM.
    Might also see this post by Gallomimia...
    http://discussions.apple.com/message.jspa?messageID=9465359#9465359

  • TS2756 I can no longer connect via USB/service missing

    ..& my iPhone does not show up on the list anymore.  I can still use Wi-Fi, though.  I would like to be able to use the USB connection again.  Resetting the network settings doesn't help.  BTW, I'm using it with my MacBook Pro running 10.7.5 and my iPhone has the latest iOS update as well.
    When I first got the phone, I always used my internet connection via USB, but then it started giving me trouble.  I tried all kinds of suggestions that I found here and it was a real crap shoot -- sometimes it worked, and sometimes not.  Now it just won't work at all.  I recently deleted my iPhone from the list of services thinking that the next time I plugged it in, it would recreated the service.  It did not.  So, I'm still using it as before: just connecting over Wi-Fi (the network is still available, it just doesn't show up in my list of services on the left-hand column under "network").
    Anyone have any suggestions that they know will fix this? 

    Hi DaveX83 and welcome to the discussions.
    A few things to try.
    Press the reset button once on the back of your Extreme and let it restart. Check for proper operation.
    If no help there, keep the ethernet cable connected, and open Airport Utility. Click on Manual Setup near the bottom of the pane. On the next screen click the Airport icon at the upper left of the pane, then click Wireless in the line just below that reads Summary - Time Capsule - Wireless - Access.
    Check to see that your wireless is set up, security set up, passwords, etc. You may need to reconfigure your wireless settings again and update the Extreme to store them and restart.
    Hope this helps.

  • Install Arch on hard disk connected via USB

    Hi,
    anyone tried this?
    I had Arch Linux installed on hdd in my desktop, now I've connected this hdd to laptop via USB and I want to start system from it. I need to reinstall lilo, because I get kernel panic after booting from USB.
    I don't know how to do this, I boot laptop from Archie Live CD and:
    mount /dev/sda2 /mnt/m
    chroot /mnt/m
    editing /etc/lilo.conf
    lilo
    and I get error: Failed stat("/dev/dsa2")
    Anyone know how to install lilo on hdd connected via USB?
    thanks for any help

    i know it's an old thread, but perhaps it'll help someone else later...
    i first tried installing from cd, with some problems, using an arch 0.7 cd.
    then i tried it with a newer one (arch 0.7.1) which did'nt recognize the external harddisk and my network device...
    so i tried a ftp install from 0.7 cd - without problems.
    then after trying to boot i got also this kernel panic, because the usb drive wasn't accessible like this.
    with following steps i got it running:
    boot from live cd (e.g. archie)
    create a folder in /mnt/
    mount usb drives partition with the installation there
    chroot to mounted folder
    edit /etc/mkinitrd.conf
    configure it (usb,scsi,ide), there are useful comments in the file...
    save it and run mkinitrd -auto
    then edit and save /etc/lilo.conf as described in the wiki: http://wiki.archlinux.org/index.php/Initrd
    installing lilo from the chrooted system doesn't work. so do this:
    type exit (to leave chroot)
    cd /
    mv /etc/ /etcold/
    mv /boot/ /bootold/
    ln -s /mnt/yourmountfolder/boot
    ln -s /mnt/yourmountfolder/etc
    lilo
    (if there's an other, easyer way to install lilo, let me know)
    and then reboot...

  • Can AirPort express be used for AirPlay with my home stereo, and to give my Xbox 360 a WIRED internet connection via ethernet, simultaneously?

    I am considering buying an airport but I am not sure if it will work how I would like it to.  I need it for two things.  The first would be to use for AirPlay with my home stereo.  The second would be to use as a way to give my Xbox 360 a WIRED internet connection via the ethernet port.  I would like to do these things simultaneously, rather than constantly changing the configuration and being limited to a single function each time I do so.
    Thanks!

    The 802.11n AirPort Express Base Station (AXn) can be configured as a wireless Ethernet bridge. In this configuration, it would join an existing wireless network and its Ethernet port would be enabled for a wired client, like your Xbox 360. This configuration would also support AirPlay simultaneously.

  • How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

    How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

    Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

  • How can I transfer photos from LG phone to mac notebook.  Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

    How can I transfer photos from LG phone to mac notebook.  Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

    Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.

  • Can I share my internet connection via wifi AND use my wireless printer at the same time?

    Not completely familiar with  wifi capabilities. I have this new setup in my office. I want to share my iMac internet connection via wifi so I can text and check emails using my iPhone (no cell service inside the building). Which works fine. However, I now cannot print wirelessly to my HP printer (LaserJet Pro 400 color). Once Internet sharing is off, I can print just fine. Any other wireless options, or just go get a long USB cable?

    Hi,
    It is not a multitasking printer, other devices may keep it therefore the best option in this case: connect it to your wireless router and all devices which are conntected to this router can sahre the printer.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hi. I have temporarily moved away from home. I am using a different internet connection, and I have lost my bookmarks. How do I get them back?

    Hi. I have temporarily moved away from home. I am using a different internet connection, and I have lost my bookmarks. How do I get them back?

    Generally speaking, your bookmarks are private to your computer, and if you set up multiple Firefox profiles on your computer, to the one profile.
    Your bookmarks might be available to you at another location if you used the Sync service. In order to connect a new computer to the Sync service when you aren't near your old computer, you need a recovery key. https://support.mozilla.org/en-US/kb/share-bookmarks-tabs-and-more-your-other-computers#w_what-if-im-not-near-my-first-computer
    If you didn't use Sync or can't access your account, someone with access to your old computer could email you your bookmarks. Since there is a range of different ways to do that and the best choice might depend on what you can expect the person you ask to be able to do... could they start up Firefox in your profile and follow menu steps to export a file? Could they drill down into a hidden folder on the system, zip a file, and mail that to you? Etc.

Maybe you are looking for

  • Why do I get an error of B2010002, when I open an NI-CAN object?

    I am using the configuration of the property page to setup the PCI-CAN card. I am using Extended Arbitration Number of 0xFEF100. My code is in VB 5.0. The code works with a number less than 0xFFFFF. The B201002 is an Implentation-specific error in NI

  • Changing keyboard on the Macbook macbook pro

    Hello all, I am really considering switching to Mac soon... I have a question regarding the Macbook keyboard. I was actually wondering if it is possible to change the keyboard on it easily or via an apple store. I'm in france and we have a AZERTY key

  • Rhvariable.apj file

    Hi, When I try making changes to the variables, either adding or modifying, I receive a message that an error occurred while trying to read data from the rhvariable.apj file. This message occurs every time I press "Save". How do I fix this? Thanks, J

  • Crashing when loading bookmarked eBay sites or Firefox help links.

    Mac OS 10.6.7, Firefox 3.6.16. Crashing when accessing bookmarked eBay sites (anything having to do with my account/lists). Also crashes when trying for Firefox links to problems with plug-ins and problems with extensions, thus cannot access Firefox

  • REP-50138: mail : Mail server is not available in eBiz R12 Advanced Distrib

    Hi, I am trying to get Reports Advanced Distribution working in eBiz 12.1.1 for custom reports but get concurrent job failures with the following messages in the job log:- REP-57054: In-process job terminated:Executed successfully but there were some