How to use Photoshop CS6 when booted from a different partition?

I have CS6 installed. I recently created a second partition on my SSD for development in OS X 10.10. When booted from that drive, I get an error that CS6 was not properly installed and to re-install it.
This is a smaller partition, with just the system and a few development apps, and I'd prefer to continue to run my larger apps from the original, larger partition.
Of course, every app I have tried does this with no issues except CS6. I usually need to re-enter app serials, but they work.
What files need to be copied from one partition to the other to let the app boot up?

They work fine. I first tried with a clone of my main drive doing an update in place on it.
i guess I will need to boot into 10.9 to use them.
I will mostly use stand-in apps like Pixelmator.

Similar Messages

How to use Photoshop CS6

Hi Peeps,
I have been using Photoshop Elements 4.0 but now I have to switch to Photoshop CS6 as there are some printing issues with Elements 4.0.
I would like to seek for your kind advices how to use Photoshop CS6 as I can't seems to find the answer in support link.
In Elements 4.0, there is a Pencil mode we can use and set the size but i did not find it in CS6 except the Pen mode.
As well as in Elements 4.0, i can show grid lines as i need to make the images centralised but i cant find in CS6 also, the option is greyed-out.
May i seek for the users/experts of Photoshop CS6 to enlighten me?
Thank you so much.
Best Regards,
Kazz

Hihi Silkrooster,
Thank you so much for your prompt reply!
May I still seek further assistance from you? As I simply can't get the pencil line that I wants.
In Elements 4.0, I just have to simply select Pencil -> Size: 3 px, Mode: Normal Opacity: 100% and I can get the size of the pencil line that I need.
See attached screenshot below: -
But in CS6, i tried the combination of 2B pencil -> Size: 3 px, Mode: Normal Opacity: 100%, but it does not work so i go to extend to set Brush Tip Shape.
See green box 1: its the pencil line that I want.
See green box 2: its set to 3px, square pointed, softness: 100% but it's too big and looks faded.
See green box 3: All is the same except is 2px but at least it looks so much alike to the one i need (dark, black solid line) but it's too thin.
Can enlighten me how to go about it plssss?
Thank you so much.
Best Regards,
Kazz

How to change Photoshop CS6 CC UI from English to French (France) ?

Hello,
I'm running Windows 7 64-bit, US english operating system, so when I subscribe to PS CS6 CC edition, the english UI was installed. Is it possible to change the UI (menus, help, etc.) To french (France) I live in the US but my working language and instructional materials for using Photoshop CS6 are in french, not "french canadian," but french from France. Training EU francophone clients and personnel would be a lot easier if we were all using the french interface.
Many thanks for your kind help,
Rafi

It is possible to change the installed language from the Adobe Application Manager (AAM). Click on your name in the top left and from the menu choose Preferences. Switch the Language to French. You will need to uninstall the English version and then install the French version.
Of note is that some European customers select the Internation English only version of the Creative Cloud subscription. If that is the case than all languages execept International English will be a 30-day trial version.

How to uninstall Photoshop CS6 when the "Adobe Installers" is missing from the Application/Utilities/.......(missing Adobe Installers)"?

I recently had all of our information from an older iMac transferred to a new iMac (transfer done through the Mac store). Now when I try to open up Photoshop CS6 from the dock, get a response that says :Configuration Error and below that "Error: 16". It also says to uninstall Photoshop and then to re-install it. The problem is that somewhere in the past, the Adobe Installer was deleted, so am unable to continue with the process- so am unable to uninstall. Appreciate any help. Have not had any problems prior to this.

I do not own a Mac and never have so I have little to offer in the way of how get something uninstalled on one. If the Cleaner did not recognize that you have CS6 installed there are two things I could think of that I would consider - 1) just try reinstalling CS6 2) just delete anything you can find relative to CS6 and try reinstalling it. The second is option is the least recommended from my standpoint since I do not know what the impact might be, but I don't think trying the first would hurt much... it might just get the installer in place and then provide you with the ability to uninstall.

How best use Photoshop CS6 (not CC) to edit AVCHD video?

Neither Photoshop CS6 Extended (not CC) nor OS 10.10.2 seem to recognize AVCHD files on a camera card?
Yet, iMovie will import them -- apparently for use in iMovie only. The quality as seen in iMovie is poor and the program is inferior to even the simplified video editing facility in CS6.
How do I get access to these video files in the highest possible quality and bring them into CS6 Extended for editing?

I don't think AVCHD formats like M2TS files are supported, out of the box anyway. I know Sony Creative's apps like Vegas and Vegas Movie Studio can open them natively since it's their format to begin with.

Booting from a different partition of an external hard drive

Any chance anyone could offer some advice for my asthmatic iBook G4?
The internal hard drive has given up the ghost.
I have re-installed Mac OS X 10.3.3 on a NEW external portable drive which I have partitioned. I have copied the contents of the farked internal HD - Mac OS X 10.3.9 to partition 2 of the external drive. Partition 1 currently has the re-installed recovery version OS X 10.3.3 on it and is now the selected drive and volume to boot from. However I now want to change the boot volume from partition 1 to partition 2 which includes all the OS updates to 10.3.9 plus all my user preferences, etc.
I have tried everything but to no avail. Renaming the partitions by reversing the numbering has no difference. The Start Menu just recognises the same parition even though it is renamed as other partition and vice versa. The Start Up file in System Preferences won't recognise partition 2, only partition 1 and the farked internal HD. I have tried restarting the iBook while pressing the Option key with and without the recovery disc #1 in the CD drive. No difference.
I am thinking now that the Start Up menu is able to only recognise 2 drives - the internal and an external one which is connected by Firewire 400 port of which there is only one. Or only distinct drives. It can't recognise separate partitioned drives which would be pretty pi$$ poor. There are two other USB ports but I guess these are for other peripherals.
So how can I get my iBook G4 to boot from Partition 2 of the NEW external drive?
Just to re-iterate my iBook boots fine from the NEW portable hard drive partition 1, but this partition only has the OS X system as per the recovery disc.
My Mac is starting to really test my patience.
Any help would be greatly appreciated.
Message was edited by: AlAlexander
Message was edited by: AlAlexander
Message was edited by: AlAlexander

Limnos wrote:
*In order to produce a bootable copy of the system on another volume you have to copy it using a cloning utility. Plain drag and drop will not work with OSX*.
[CarbonCopy Cloner|http://www.bombich.com/software/ccc.html] (donationware)
[SuperDuper|http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html] (shareware)
[IBackup|http://www.grapefruit.ch/iBackup/index.html] (free)
The Restore function of Disk Utility included in OS X. [Kappy's directions|http://discussions.apple.com/message.jspa?messageID=8799711#8799711]
[Tri-Backup (commercial)|http://www.tri-edre.com/english/tribackup.html] (payware)
[Silverkeeper|http://www.lacie.com/silverkeeper> (free) - version 2 has some issues (references: [here|http://www.macintouch.com/readerreports/backup/index.html#d12jan2009], and [here|http://www.macintouch.com/readerreports/backup/index.html#d13jan2009]) and it is recommended Tiger users stick with 1.1.4.
[Kappy's Backup Software Recommendations|http://discussions.apple.com/message.jspa?messageID=9065665#9065665]
[Overview of Mac OS X Backup Programs|http://8help.osu.edu/1247.html]
Drag and drop is what I did so I will have to use CarbonCopy Cloner. Thanks for the tip. I shall report back shortly.

How to use a Web Service Proxy from a different DC?

Hi developers,
In EJB DC "dc1" I have imported a wsdl and generated proxies and service group.
In public part "compilation" of dc1 I have added all the generated proxy classes and the wsdl from META-INF/wsdl folder
EJB DC "dc2" depends on this public part (also on the mcjar public part which should hold info on the Service Group).
Here I would like to use the proxy classes defined in "dc1" to invoke the WS in my WSConsumer StatelessEJB like this:
@Stateless
public class WSConsumerBean implements WSConsumerLocal {
     @WebServiceRef
     ZWSWORKSHOP1 service;
     public ArrayOfString testWS() {
          ZWSWORKSHOP1ViDocument port = service
                    .getPort(ZWSWORKSHOP1ViDocument.class);
          ArrayOfString retVal = port.doOperation();
          return retVal;
After deploying the EAR with both the proxy and the ejb, when I try to invoke the EJB injection fails:
javax.xml.ws.WebServiceException: JAX-WS deployable proxy is instantiated with 'new' instead of been injected. Cannot find WSDL URL for service [class zws_workshop1wsd.ZWSWORKSHOP1]
Can someone help?
Thanks, regards
Vincenzo

A solution is to use JNDI lookup in EJB.
Instantiate a InitialContext and lookup the JNDI entry with the lookup String you can find in NWA -> JNDI browser
Have fun!
Thanks, regards
Vincenzo

Wanting to use Photoshop CS6 to open images directly from iPhoto 11. Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open images directly from iPhoto. Before I installed PS I was not able to edit photos in iPhoto 11. Nothing

Wanting to use Photoshop CS6 to open images directly from iPhoto 11.
Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open
images directly from iPhoto. Before I installed PS I was not able to edit photos
in iPhoto 11. Nothing happens when I click on ‘edit‘ it is blank.
And now it will not work using Photoshop CS6 either.
From Help Center I have gone to iPhoto/Preferences/ Advanced and chosen Photoshop CS6 to Edit Photos but then cannot find an 'Open' to click? Perhaps this is the problem?
When I select a photo in iPhoto and click the Edit button - nothing happens.
Please advise. Glenys

This may be of help to you:
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

Getting files from a business that uses Photoshop CS6. I use CS3 and have text problems

Hi, I'm getting files from a business that uses Photoshop CS6. I use CS3 and when I edit the text, the text moves to a different location even off screen.
Anyone know how to fix this?
It makes it hard to copy the text and imposible to change the color or make corrections.
This just started when they went to Photoshop CS6.
Thanks,
Jeffery

Ask the folks supplying you with files whether they've updated to the latest version... There were problems with Photoshop CS6 13.0.0. saving text layers in jumbled-up fashion.
-Noel

Can't use the keyboard shortcuts in Photoshop CS6 when updating Mavericks

Can't use the keyboard shortcuts in Photoshop CS6 when updating Mavericks

Thanks everyone. What worked for me was a version of the suggestions above. I had the problem with the ≠ character appearing in all my Photoshop CS6 keyboard shortcuts and rendering them largely unusable. However, I don't have any other keyboards besides US English enabled on my Mac. I do have Spell Catcher installed, which works through the keyboard input method. So, I switched from Spell Catcher back to English (with the US flag), launched Photoshop and presto, my keyboard shortcuts were restored, absent that obnoxious ≠ symbol. Once in Photoshop, if I reselect Spell Catcher, the ≠ symbol returns so I have to run Photoshop without the help of Spell Catcher - or forego the use of keyboard shortcuts while it's on. Since the developer of Spell Catcher passed away last year there will be no more updates to the otherwise very useful utility. Apparently this keyboard shortcut problem in the various guises reported here is linked to some element of the OS X input method in Mavericks, as Photoshop seems to manifest the issue in relation to one specific input source or another. This is the first application in my experience to have a problem with Spell Catcher in OS X 10.9. So I will continue to use it, except in Photoshop. Spell Catcher was never updated for Mountain Lion or Mavericks so people like me will have to use it "at our own risk" as the saying goes. Be that as it may, it does appear to be a bug in Photoshop that's at the root of this matter as different people have somewhat different problems with the OS X input method - not that I expect either Adobe or Apple to do anything about it.

"Select Color Range" not working. "Warning: No pixels were selected" returned when attempting to use. Using Photoshop CS6 on a Mac running OS X Yosemite

"Select Color Range" not working. "Warning: No pixels were selected" returned when attempting to use. Using Photoshop CS6 on a Mac running OS X Yosemite

Here are three screenshots in succession from trying to perform the color selection:
Dropbox - Screenshot 2015-02-12 14.57.40.png
Dropbox - Screenshot 2015-02-12 15.00.14(2).png
Dropbox - Screenshot 2015-02-12 15.01.00.png

I have heat issues into MacBook pro after installing windows 8. when boot from windows ha've overheating. how can I fix it??

Have heat issues into MacBook pro when boot from windows partition how can I fix it??

panarpan wrote:
Have heat issues into MacBook pro when boot from windows partition how can I fix it??
Are you saying you're running Windows in BootCamp or Windows as a Virtual Machine? You can increase the fan speed on the Mac using smcFanControl and use the software OGELTHORPE recommended to observe improvements.
smcFanControl is a Mac application and doesn't work in Windows, but if you set a higher minimum fan speed (which is how smcFanControl works) while running OS X, when you reboot into a BootCamp partition, that minimum speed tends to be carried over.

Using DW CS6; when uploading a site DW changes all dates to today; how can I upload without changing the file-dates?

Using DW CS6; when uploading a site DW changes all dates to today;
how can I upload the site whilst preserving existing file-dates?
Thanks
Paul

How are you uploading?
I do not see this behavior in DWCS4 or DWCC (I assume nothing changed in DWCS6 and then back for DWCC, but I could be wrong).
However, when I upload, I only select the files I have modified after an initial "Upload Entire Site? Yes/No" prompt. If you aren't selecting specific files to upload, and you're overwriting the files on your server with new copies of your entire local site each time, the mod dates would show as the date/time of your upload.
To select only the files that have changed since your last upload...
1. Right click on your local root folder in the Files window under Local View
2. Go to Select > Newer Local from the context menu
3. Wait until DW is done talking to the server, it could take a while, when it's done, all of the files that have a newer mod date locally than their server counterparts will be selected
4. Click the Put (up arrow) button
For me, this process never changes the dates of files that aren't part of the upload.

In photoshop cs6 when i make a canvas print photo matte how do i change colors if i chose one i dont like the one i chose???

In photoshop cs6 when i make a canvas print photo matte how do i change colors if i chose one i don't like the one i chose???

Go to Select > Color Range to sample the unwanted color(s) in your image.
Go to Image > Adjustments > Replace Color. Adjust sliders for Hue/Saturation/Lightness.
Nancy O.

I use photoshop cs6 extended and when I create a new shortcut, it will work once and then disappear..any help on why this would happen

I use photoshop cs6 extended and when I create a new shortcut, it will work once and then disappear..any help on why this would happen

Sorry, no further idea what can cause this.
Is the shortcuts file truely saved to disk? You can find in the user path, where the preferences and presets are stored for PS. Or if you go to the dialog again where you change shortcuts, is it reverted there too?

How to use Photoshop CS6 when booted from a different partition?

Similar Messages

Maybe you are looking for