How to use Prelude just as a logging program?

During shooting we have to work very fast and just get the media off the camera cards ASAP via the shortest route i.e. directly store on a drive using a card reader and no intermediate software like Prelude, which I suspect would be too slow for our needs on a shoot day in any case.
However, I would then later, when I have time,  like the organisation and compatability that Prelude can bring for editing in Premiere Pro. I can do this if I import the already ingested material from the drives, but if I do this Prelude then makes another new copy on the the drives of all the media - this wastes time and also causes massive storage problems with formats like Red 4K.
Is there a a way to use the logging and comment facility ONLY in Prelude so that clips can be organised but not re-copied onto the drives?

This is what the on-line chat help person thinks - no go it seems!
John: So do you think it is possible just to log without re-ingesting the media
Vaibhav: No
Vaibhav: you have to ingest file and then would be able to log
John: yes but I have already ingested them and do not want to double the storage I would require or the time it would take to re-ingest - just want to add comments to the files
Vaibhav: but if you want to log and comment ingesting is must
John: Ah then that is a failing in the software - I have posted it on the forum - thanks anyway
Vaibhav: you are welcome
Vaibhav: you can fill in the feature request form
John: where is that?
Vaibhav: one minute
Vaibhav:https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
John: thanks
Vaibhav: Thank you for contacting Adobe. Good Bye.

Similar Messages

  • How to use a parameter of a report program in a dialog program

    how to use a parameter of a report program in a dialog program.
    I have to fetch the value entered in the parameter of report program and display it in a dialog program

    Hi Aasim,
    Just mention like below in your ABAP report.
       PARAMETERS: p_aufnr TYPE aufnr MEMORY ID ord.
    and mention the same memory ID name in the module pool screen property it automatically populates the value to and fro

  • How to use a parameter in a report program in a dialog program

    how to use a parameter in a report program in a dialog program

    Hi Shaikh,
    Post it in http://scn.sap.com/community/abap
    "ABAP Development".
    sree

  • I m a insurance agent how to use my company product sales illustration program

    How to use my company product sales illustration program ?

    Who knows? XD
    You haven't mentioned anything about the program.
    Why don't you ask your company for training? (if it is an inhouse developed program).
    Otherwise, go to the website for the program. Use GooGle!

  • How to use a parameter  of a report program from selection screen in a dialog program

    how to use a parameter value(entered ) of a report program from a selection screen in a dialog program.
    I have to fetch the value entered in the parameter of report program and display it in a dialog program

    Hi Aasim,
    Just mention like below in your ABAP report.
       PARAMETERS: p_aufnr TYPE aufnr MEMORY ID ord.
    and mention the same memory ID name in the module pool screen property it automatically populates the value to and fro

  • How to use Labview 7.0 to make program interface?

    Hellow!
    Will Labview 7.0 be able to make the program interface? just like some application software made by VC++,VB?
    The program interface should have the menu,button,...
    Thanks!

    You can use LV to create a fully working program with an interface of your design, just like you would in any other compiler. LV actually serves as a compiler for a graphical language called G, which is based on dataflow instead of text based execution (the data "flows" through wires from one function to the next, controlling execution order and filling the role of variables).
    Since LV is multiplatform (and not MS), its default controls are not identical to those in VC and VB, but those can be accessed to. Actually, in many ways, it's much easier to build an interface in LV, because building the interface actually defines your "variables" and your interaction with the code.
    An interface would be no good without a program, so you will have to know how to use LV. It's much faster to learn than other languages, but you will still need some experience to write good programs.
    To learn more, I suggest you start by reading the LabVIEW user manual. Also, try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
    In addition, I suggest you read the LabVIEW style guide.
    If your question was only about MS buttons, like in VB and VC, you can find them in the Dialog Controls palette, or you can use ActiveX to embed them into your program.
    Try to take over the world!

  • How to use multiple visa read in one program

    hi
    i am working at Hameg HM8143 power supply i want to measure voltage and current simultaneiously and use the measured values for further calculations. for this i used two visa read blocks.
    >>>>>>the measured values are shown in the same visa read string however i want it to be shown sepetately,
    >>>>>>One of the VISA read block gives error. so i want to know how to use VISA read to get current and voltage simultaneously in seperate strings
    >>>>>>than how to convert strings to numbers  for using them for my calcultions.
    i am attaching screen shot as well
    Attachments:
    screenshot.JPG ‏164 KB

    you can not use a single serial to send 2 commands simultaniously?
    There is a single serial line so one command has to be before another.  This doesnt mena that you can not read from 2 seperate threads but will have to ensure that there is a locking mechanism to make sure that your queries are atomic.  In labview encapsulating all communications can be done with an action engine which will allow for concurrent execution with automatic blocking of your resource (serial device).
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • How to use shared variables with native c programs

    Hello
    What is the way to use shared variables with native c programs?
    I have a c/c++ program that uses the NIDAQmx C-API to perform measurements. Now I want to communicate to a LabVIEW program via shared variables.
    Is there a C-API for shared variables as there is for the NIDAQmx functionality? Where can I find further documentation? The document "Using the LabVIEW Shared Variable" mentions that one "can read and write to shared variables in ANSI C", but there are no hints about how and where to look.
    Thanks in Advance

    Hi user42,
    with CVI 8.0, you cannot create or configure shared variables. However, you can read or write to an already configured LabVIEW 8.x shared variable from CVI using the DataSocket API.
    In order to do this you need to have and DataSocket 4.3 or higher installed.
    Here's a forum post about using the DataSocket functions a LabVIEW Shared Variables:
    http://forums.ni.com/ni/board/message?board.id=180&message.id=24569&requireLogin=False
    With CVI 8.1 and Measurement Studio 8.1 it's possible to use Shared Variables via the Network Varaiable Library (check out the end of the "Network-Published Shared Variable" section within the "Using the LabVIEW Shared Variable" documentation and the following link).
    Datasocket with LabWindows/CVI and LabVIEW Real-Time:
    http://digital.ni.com/public.nsf/allkb/CC4343488413A2F586256E6200099638?OpenDocument
    Daniel
    NIG

  • How to use macro's functionality in a programe...?

    hi,
    i am siva,
    i am new to abap,
    i am not having clarity on how to use macro in a programe,
    please send me any source code of a programe which
    contain functionality of macros..?
    and explain functionality of macros...?
    i any of u know answer..
    please send me source code of a programe that use macros...?
    reguars,
    siva.

    Hi,
    <u>Macros:</u>
    If you want to reuse the same set of statements more than once in a program, you can include
    them in a macro. For example, this can be useful for long calculations or complex WRITE
    statements. You can only use a macro within the program in which it is defined, and it can only
    be called in lines of the program following its definition.
    The following statement block defines a macro <macro>:
    DEFINE <macro>.
    <statements>
    END-OF-DEFINITION.
    You must specify complete statements between DEFINE and END-OF-DEFINITION. These
    statements can contain up to nine placeholders (&1, &2, ..., &9). You must define the macro
    before the point in the program at which you want to use it.
    Macros do not belong to the definition part of the program. This means that the DEFINE...ENDOF-
    DEFINITION block is not interpreted before the processing blocks in the program. At the
    same time, however, macros are not operational statements that are executed within a
    processing block at runtime. When the program is generated, macro definitions are not taken
    into account at the point at which they are defined. For this reason, they do not appear in the
    overview of the structure of ABAP programs [Page 44].
    A macro definition inserts a form of shortcut at any point in a program and can be used at any
    subsequent point in the program. As the programmer, you must ensure that the macro
    definition occurs in the program before the macro itself is used. Particular care is required if you
    use both macros and include programs, since not all include programs are included in the syntax
    check (exception: TOP include).
    To use a macro, use the following form:
    <macro> [<p1> <p2> ... <p9>].
    When the program is generated, the system replaces <macro> by the defined statements and
    each placeholder &i by the parameter <pi>. You can use macros within macros. However, a
    macro cannot call itself.
    Ex:
    DATA: RESULT TYPE I,
    N1 TYPE I VALUE 5,
    N2 TYPE I VALUE 6.
    DEFINE OPERATION.
    RESULT = &1 &2 &3.
    OUTPUT &1 &2 &3 RESULT.
    END-OF-DEFINITION.
    DEFINE OUTPUT.
    WRITE: / 'The result of &1 &2 &3 is', &4.
    END-OF-DEFINITION.
    OPERATION 4 + 3.
    OPERATION 2 ** 7.
    OPERATION N2 - N1.
    The produces the following output:
    The result of 4 + 3 is 7
    The result of 2 ** 7 is 128
    The result of N2 - N1 is 1
    Here, two macros, OPERATION and OUTPUT, are defined. OUTPUT is nested in
    OPERATION. OPERATION is called three times with different parameters. Note how
    the placeholders &1, &2, ... are replaced in the macros.
    Regards,
    Bhaskar

  • How to use form personalization to lunch concurrent program

    Hi,
    Now I am using the form personalization to lunch a concurrent program with global variables.But how to post the global variables to the program parameters.
    Thanks and best regards
    Fang
    Edited by: 895910 on Dec 25, 2011 7:54 PM

    Hi,
    I have defined global variables using form personalization. But how should i launch a SRS Form to submit a request and pass the variables as parameters. What should the syntax be.
    Thanks and best regards,
    Fang

  • How to use controls in silverlight direct3d interop program ?

    I'm working on convert my winrt program to silverlight program.
    And I'm using silverlight 8.1 now. The program has two part, SilverlightDirect3DInterop(C#) project and SilverlightDirect3DInteropComp(C++).
    The question is, I can't use control in SilverlightDirect3DInteropComp.
    In my program, all control are created and used by code.
    I want to use these control in SilverlightDirect3DInteropComp.
    How should I do?

    Hi Y.H.King,
    I may need to know what SilverlightDirect3DInteropComp used for, is it a runtime component in Windows Runtime, or its a simply a DLL project?
    And another question is how you create the controls in your C++ library? And how you use the control in your runtime app?
    --James
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to use d2kwutil for calling win-api programs in form 6i

    I WANT TO USE d2kwutil for calling win-api programs in form 6i.
    PLEASE GIVE ME IT'S SOLUTION.

    D2kwutil comes with a Demo Form WAPIDEMO - you can run this to see every function demonstrated. You can even run a function using the demo form and copy the syntax required directly into your own form -------------------------
    yes in have got that WAPIDEMO from web and run successfully but
    i can not do those codes in my owdn form.Because i do not get those apis like
    win_app_session in form 6i.
    Again i could not understand how that form runs without connecting to database.
    Please describe the solution.

  • How to use setters and getters in another program by using bean

    how to use the setters and getters methods using database connection by bean

    Say again?And so he did:
    http://forum.java.sun.com/thread.jspa?threadID=750645
    kind regards,
    Jos ;-)And again
    http://forum.java.sun.com/thread.jspa?threadID=750643&tstart=0
    No, that's his class mate I guess; it must be national getter and setter
    day somewhere today ;-)
    kind regards,
    Jos

  • How to use NAST entry inside a printing program.

    Hi,
         I am writing a program to print an invoice using smartform.
    I am refering NAST-OBJKY to get the invoice No.
    My program throwing syntax error that NAST-OBJKY is unknown.
    But if I copy a standard printing program, and use it different name, there is no error.
    Thank U for Ur time.
    Cheers,
    Sam

    hi
    u r using the correct on but first movethe value to another varable like
    VBRK-VBELN
    USE THIS INCLUDE IN U R PROGRAM <b>RVADTABL</b>
    SAM the reason for u r problem is NAST is not declared in u r program... but in the sandard program they have declared it in the include RVADTABL
    Message was edited by:
            Naresh Reddy

  • How to use user id of the logged user (in Application) in the Valueset

    Hi All,
    I want to Create a Table Value Set.
    i want to Filter the values in value set based on the User id by which user has logged in Application.
    How to get user id and how it can be used in Table Value set Query.
    Please guide me...
    Waiting 4 ur response.
    Thanks
    Sheetal

    Hi Sheetal,
    You can call the function fnd_global.user_id to get the current user identifier of the logged in user.
    Regards,
    J.
    SELECT fnd_global.user_id
    FROM   dual

Maybe you are looking for