How to use previous system

I know this has got to be a common question but I can't find the answer anywhere.If I reinstalled tiger and alot of things are not working correctly, or is asking for serial numbers etc when starting an application how do I get the information from the previous folder to the hard drive thanks james

Without knowing what software you're talking about, nobody can make any guess as to where the registration info may be or what files may be needed. Your best and fastest route would just be to re-enter the serial numbers manually.
In the future, please use Carbon Copy Cloner or SuperDuper to make an exact clone of your system to an external drive before reinstalling the OS.

Similar Messages

How to Use a System Repair Disc to Restore Windows 7

Hi ! Please start here!
http://www.dummies.com/how-to/content/how-to-use-a-system-repair-disc-to-restore-windows.html
http://forums.toshiba.com/t5/Computer-Troubleshooting/What-can-I-do-if-my-Windows-7-or-Windows-Vista...
http://forums.toshiba.com/t5/Windows-8-Knowledge-Base/What-can-I-do-if-my-Windows-8-laptop-won-t-sta...
http://pcsupport.about.com/od/toolsofthetrade/ss/windows-7-startup-repair_2.htm
PS Please read all these links and then post back here with your complete model number found on the bottom of your laptop and complete information to what you have tried to get your PC working I would love to spoon feed everyone. It's just not possible.
Dokie!!
PS2 Now read this and see if any thing here helps.
http://forums.toshiba.com/t5/Computer-Troubleshooting/FYI-Recovery-to-Factory-Settings-Toshiba/td-p/...
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture40.JPG ‏238 KB

Hi! I found this on the form!
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/How-To-Understanding-System-Recovery-Optio...
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

How to use Operating System Commands while using define in sqlplus

How to use Operating System Commands while using define in sqlplus . The Host OS is Linux
define report_name=PROD_${host date "+%b"}.html
The above is not working.
The output should be
define report_name=PROD_JAN.html
Regards,
DB

of course I was talking nonsense: the problem here is the mixing of bind variables and DEFINE variables.
With the following changes the script should work (the conditions for begin_interval_time are perhaps not what you want):
variable snap1 number
variable snap2 number
variable rptname varchar2(20)
begin
SELECT min(snap_id) into :snap1 FROM dba_hist_snapshot WHERE CAST(begin_interval_time AS DATE) >= SYSDATE-1;
SELECT max(snap_id) into :snap2 FROM dba_hist_snapshot WHERE CAST(begin_interval_time AS DATE) >= SYSDATE-1;
end;
col file_name_value new_value report_name noprint
select 'PROD_'|| to_char(sysdate,'MON') || '_' || to_char(sysdate,'DD') file_name_value from dual;
define report_type = 'html'
define num_days=2
define begin_snap=:snap1
define end_snap=:snap2
@@?/rdbms/admin/awrrpt.sql

How to Use a System Repair Disc to Restore Windows 7 For Seniors For Dummies

Hi I'm new to this forum and I haven't seen the proper place to post some thing like this. I'm going to post it here and staff can do what they wish with it.
I can't understand why people aren't creating a System Repair Disc to Restore Windows 7. This is the best tool you can have. I have seen a ton of people posting here that can't boot into Windows 7. No mention of a repair Disc. Can you people not read?? This should be one of the first things to do after creating System Recovery Media(Mine requires 5DVD's). What is your thinking not to do these things?
http://www.dummies.com/how-to/content/how-to-use-a-system-repair-disc-to-restore-windows.html
http://windows.microsoft.com/en-US/windows7/Create-a-system-repair-disc
PS I don't have any trouble. I just want people to please do these things and save your self a lot of grief, and make a back up image of your OS on a external drive
Dokie!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Hi! I found this on the form!
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/How-To-Understanding-System-Recovery-Optio...
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

How to recover previous system?

Hi All,
I need some help with Mac OS X. During a process to reinstall Mac OS I lost my previous system folder. Any help tips how to recover my lost data would be greatly appreciated.
While I was reinstalling the OS X I picked option to archive the old system and I was able to see the folder named "previous system" but this folder disappeared after the software update. Now that folder looks like a developer folder with a hammer. I think that my data is still there and I just don't know how to recover it.
In my past life I was a PC, Now a Mac & a little lost.
Thank You
Guava
Message was edited by: Guava101
Message was edited by: Guava101
Message was edited by: Guava101

Guava101 wrote:
Yes, I installed Mac OS X Leopard Version 10.6. When I installed it from my DVD, it gave me an option to archive and continue,
no, something is wrong here. snow leopard installer doesn't give you any such options. no kind of snow leopard install could possibly create a previous systems folder. and it would keep your data directly not in any such folder. I suspect installed leopard. go to apple menu->about this mac. what os x version does it say you have. also, it seems clear from your post that you don't back up. is this right?
which I did and later on I found my previous system in a folder. After a few days I used software updates from apple website and my previous system folder got replaced by a developer folder with a pic of a hammer.
All of my documents and pictures disappeared. Also, my iWork is gone. I am not reinstalling the iWork until I get some feedback from this forum.
Thank you
Message was edited by: Guava101

How PI uses technical system information in SLD

Hi Experts,
I know there are business system and technical system registered and associated in SLD.
Especially for those SAP systems, in our normal PI scenario, how PI uses the technical information which was registered under Technical System in SLD since we need again configure the host/port and credentials details in the sender/receiver channel in ID.
Or SLD is just one central place for collecting all the technical information together only for life cycle management?
There is nothing more to do with the Tech System (SLD), PI only needs the business system in scenario.
Please knidly share your opnion, thanks in advance.
Best Regards,

Hi Aditya,
Let me provide an example to describe the need fot technical systems.
Think of an outbound scenario : SAP ECC/CRM -> PI -> Third Party (ex: SOAP)
Now just think how PI will identify what the sender is (ECC/CRM or 3rd party) if the TS is not registered in SLD? The Business Systems are logical systems whcih points to Technical Systems (application systems that are installed in system landscape). TS hold the information about the actual systems, its host, IP, clients etc.
Now based on the source BS which points to TS, the target binding is done in Receiver Determination pipeline step. Now if there is no TS attached to the BS how can PI identify whether ECC or CRM is sending the data and hence will not be able to identify the relevant target for the source.
Think of Business Systems as sitting on top of Technical Systems, and when the landsape details are not known for third party systems we use Business Component/Business Service.
Cheers,
Souvik

How to use previous year keyfigure data in current year for other keyfig

Hi Expert,
I have 1 requirement wherein I need to use previous year data for some keyfigure calculation.
Details are as follows:
I have designed query with CKFs Turnover & UVG (in rows) & Fiscal year period in columns.
Suppose Keyfigure Turnover data is displayed from Apr2009 to Mar 2011. In UVG: for Apr 2010, i need Turover data of month Apr 2009, for May 2010 turnover data of May 2009 similarly for other months.
As per my understanding, I need to use customer exit which will store kf turnover data in internal table & in turn it will be used for UVG.
But I'm not able to put it into syntax.
Kindly suggest your inputs in this scenario.
Thanks,
Shamkant

Hi
Note that the variable ZCALCCALMTH is exit type and variable ZCALMTHREF is ready for input.
WHEN 'ZCALCCALMTH'.
IF i_step = 2. "après le popup
READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZCALMTHREF'.
IF sy-subrc = 0.
CLEAR l_s_range.
year1(4) = loc_var_range-low(4).
year1(4) = zyear1(4) - 1.
zmonth1(2) = loc_var_range-low+4(2).
CONCATENATE zyear1(4) zmonth1(2) INTO loc_var_range-low(6).
zyear2(4) = loc_var_range-high(4).
zyear2(4) = zyear2(4) - 1.
zmonth2(2) = loc_var_range-high+4(2).
CONCATENATE zyear2(4) zmonth2(2) INTO loc_var_range-high(6).
l_s_range-low = loc_var_range-low(6).
l_s_range-high = loc_var_range-high(6).
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDIF.
bye
Boujema

How to use previous TDMS data to simulate incoming data offline

This is not a cRIO question, but a LabVIEW question. I would like to not have to connect to my cRIO everytime I want to develop my real time code. How can take a previously saved TDMS data and have Labview read the values from this file one line at a time so that the code runs just as if I were logging new data from the sensors?
Here's a lengthy example to better clarify the question: I'm using LabVIEW 2011
I'm using Scan Engine to read say, 10 channels on my cRIO every 100ms. The values from each channel come into my processing loop as an interleaved 1D array where I can process the data and save it as a row in a TDMS file. Then 100ms later I get a reading for row two in the TDMS file, then row three etc.
Now say I just want to tweak a few things on my processing loop like add a new chart etc. and want to make sure it displays properly but do not want to reconnect to the cRIO. Can I reference the saved TDMS file and get LabVIEW to send the same interleaved 1D array of 10 channels every 100ms so it simulates just the way the actual data would come in from the cRIO?

Hi jezza,
You can use the TDMS VIs to read from the file, specifying an array of doubles so that we don't have to get the waveform components in order to get the Y values. We then just build an array on a for loop and set a delay of 100 mS. You can optimize this using a Producer Consumer Architecture if you are worried that the processing VIs are going to take more than 100 mS.
Regards,
Daniel REDS
RF Systems Engineer
Help us grow.
If a post solves your question, mark it as The Solution.
If a post helps, give Kudos to it.

How to use the SYSTEM user in hana cloud

Hello guys, I started with HANA cloud trial, but I havent been able to activate any projects due to an error with permissions,
Repository operation failed
Repository request failed. Cause: Repository: User is not authorized to execute specified operation;User 'DEV_7UKVVFEAC54C2E59OZZQSHXEN' has no authorization, privilege: 'REPO.EDIT_IMPORTED_OBJECTS', package: 'hello'!, code: 40,156, argument:
Now I believe the problem is obvious is that I dont have enough privileges, I went to the Users view and tried to add permissions to my user but I found out other error:
SAP DBTech JDBC: [7]: feature not supported: grantor and grantee are identical
Now I saw in several threads that if we want to add more privileges we should add them using SYSTEM user, but I just dont know how to log in with the SYSTEM user or how to switch to that user.
Any ideas or steps on how to do it?
Greetings!

I just tried performing the exact same steps as described in the tutorial and I can confirm that I get the same error. I get the same error from the Web IDE when trying to activate folders created via the sharing wizard of the Studio.
The problem would seem to be with the Studio version that is currently available from the HANA Tools update site. When packages are created from the project explorer (either directly or through project sharing), they are marked incorrectly as foreign projects (the little blue arrow on the icon).
However if you create the packages via the Content folder of the Systems view (as I did above for the hello package) or via the Web IDE; they are created correctly. I was able to setup a project in the Studio by pre-creating the package in such a way and then creating/sharing the project into the existing package. I still got an error on the .settings sub-folder, but I could ignore it and still activate the other objects.
Therefore I would suggest this approach or using the Web IDE.

How legal use Mac System Fonts on Windows? (eula truly invalid in Europe)?

How can i legal use Mac OS 7 or X System Fonts on Windows?
I plan to buy an old broken LC / Quadra or used Mac OS X CD and copy the Mac OS System Fonts to the Windows Machine.
I dont't understand the Mac OS X eula and can't find the Mac OS 7 eula on the web.
I heared the Apple Mac OS eula is invalid and irrelevant in europe.
(incompatible with european antitrust and consumer protection law)
PS: I know already, how i can convert dfont to truetype. It's no technical problem.

Just save. There is no difference in files between platforms.
There are some Windows-centric font formats that aren't portable, by any OpenType or TrueType font will be portable between platforms.

How to use the System.nanoTime() ?

I've got a big trouble. I need to create a class with a lot of methods, each method does something, like draw squares, circles, calculate Fibonacci series, and so on. But the problem is:
1 - I need to use System.nanoTime() to calculate the time each method takes to execute and finalize its problem and compare to the time of the other methods.
Any sugestions?
Apreciate your help.
Thanks.

Yeah, sounded too simple, but I'm still wrapped. Could you please show me some code, where I have a method and the System.nanoTime() calculates the time this method takes to execute? It would be great if the method tha uses System.nanoTime() would be a abstract method, so I could use it in other methods for calculating their execution time...
Thanks a lot!

How can use Chrome System in Flash Builder

i have a problem with flash builder (Gumbo).
in fact i can't use system chrome in flash builder beta.(after changing .xml file)
please help me

Thru ExternalInterface you can use it

How to use the system recovery after add another SSD?

Dear all,
I got a Zbook14 with 1TB HDD with Windows 7 in default. Soon after I received it, I added an M.2 256Gb SSD and migrated my system drive to the SSD.
After an malfunction of the HP Client Security that encrypted my system drive (in SSD). I used the HP recovery tool to reset the computer into the default factory status... This action, which I can not select the harddrive during the recovery, wiped my oroginal system paratation (now the data drive) in the 1TB HDD, and thus I have to migrate the system again (not mentioning the data in that partation..).
I wonder if I can change the target drive for the recovery? I did not move the original HP partations from the HDD to SSD. Only the system partation is moved to SSD.
Thanks.

You don't have any option in terms of changing the target drive for an HP recovery performed by the HP recovery manager.
It is scripted and there is nothing that you as the user can change other than selecting the type of recovery desired.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I don't understand how to use the System Font Panel with iMovie.

I need an explanation of how the System Font Panel works. I guess there's a way to get some of those fonts to the iMovie Font Panel, but I can't see how.
Thank you.

I have had good success with the System Font Panel. Now all of a sudden, I only get part of it. Any suggestions on how to restore the entire panel? There are no change size options in the corners like in some dialog boxes. I was going to paste what I have here, but for some reason, paste is not available.

How we Use business system

hi gurus,
we have following business systems.
1 web as abap.
2 web as java.
3 standalone.
4 third party.
5 business party(only for xi 2.0)
rite
my question is that where we use ,which business systm ,like for which scenerio ,which busines system we use?
pls guide me.
warm regards.

Hi,
Check with this Help file
http://help.sap.com/saphelp_nw70/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
Regards
Seshagiri

How to use previous system

Similar Messages

Maybe you are looking for