How to use Print Control in Print List.
Please any body can explain me how to use print control when creating Print list?
Thanks in advance.
Please any body can explain me how to use print control when creating Print list?
Thanks in advance.
Similar Messages
-
HT4356 How to use Canon Selphy Photo Printer (CP900) to print from iPad 3?
How to use Canon Selphy Photo Printer (CP900) to print from iPad 3? I would like to print the photos in my ipad on my Canon Selphy Photo Printer (CP900) which has wifi...
hi
ideally if you want to print from the ipad you should have an airprint enabled printer:
http://support.apple.com/kb/ht4356
however, there are workarounds, you can download a decent third party app to print such as print n share, printcentral or printdirect -
How to use the Control lines of a parallel port as Input lines to be read using Labview ?
The details are :
NI Software : LabVIEW
Version : 5.0
OS : Windows 95
NI Hardware : N/A
Drivers : N/A
CPU : Pentium
RAM : 48
Vendor : darcom
Customer Information :
SPEL TESTING
SPEL, INDIA
[email protected]
Ph: (91) 4114 53818
We do not have any DAQ cards within the PC. We have the parallel port which is EPP and ECP compatible having the address 278h on LPT2 and we are trying use this port for reading 8bit data from an external circuit. We developed a vi program in Labview 5.0 to control the parallel port.We tried with the Data lines to send signals from PC to external device through this parallel port with the addr
ess 278h (which
is Data lines) and it works fine. We also tried using reading 4bit data from external
device to PC through this port with the address 279h (which is Status lines) and it
is also working fine.
But it was not possible for us to read through Control lines whose address is 27Ah. Whereas when line printer (dot matrix printer) was
connected, it was possible for us to take print out. Thus printer was working. This
informed us that the control lines are all OK!
Can you please clarify, how to use both control lines and status lines to read 8 bit data through this parallel port using the Labview software.There are several Knowledge Base entries about this on the NI site, but probably the most detailed document is on the Advanced Measurements (www.advmeas.com) website. Try looking at this page, I think you will find it useful.
http://www.advmeas.com/goodies/parallelport.html -
How to use table control in LSMW
Hello All,
I have requirement to use LSMW , in my using transaction have table control ,I need to pass values in table control . how to use table control in LSMW .Can any one give me the solution for this.
Best regards,
Satya.Note: The recording function records a fixed screen sequence. It cannot be used for migrating data containing a variable number of items or for transactions with dynamic screen sequences!
Tip: It is possible to create a recording via SHDB, generate a program out of this recording, and adopt the program to your needs and registrate the program to be able to use it in LSMW.
Thats means, for creation of project and WBS Elements is not possible through
1. LSMW-BDC (For both CJ01 and CJ20n)
2. LSMW-BAPI (Method: Maintain is not listed )
3. LSME-Standard Batch Direct Input.
Its possible through programmatically(SE38.) either using BAPI Or BDC.
Thanks, -
hi all,
how to use custom controls in screen painter.
can i add image to my screen using custom control.
is there any other way to display image on screen.
give me some notes about custom control.
and sample programs to display image and also the use of custom control.
regards,
bhaskar.hi vinod,
u can use the class <b>cl_gui_picture</b> to work around with pictures on the screen
just define a custom control on the screen
create an object of custom container.
create another object of cl_gui_picture giving container name as the parent name...
u can check out the class using the transn se24....
pls post if additional info is required...
Regards,
Vs -
How to use table control in bdc, plz somebody tell me.
Hi Gurus,
Ples tell me
how to use table control in bdc, plz somebody tell me.
And send Sample CODE also. Thnaks in advance.hi,
Table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen?
Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
we can determine the number of visible lines on Transaction Screen from our Calling BDC program.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference
in Static ASSIGN and Dynamic ASSIGN.
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop.
Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6
using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: , , .
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to ,
name2 to ,
name3 to .
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using DataTable-matnr.
perform bdcfield using DataTable-menge.
perform bdcfield using DataTable-indicator.
endloop.
enddo.
example 1
BDC table control is an area on the screen in which you can display data in tabular form. You process it using a loop. Table controls are comparable to step loop tables. While a table control consists of a single definition row, step loop blocks may extend over more than one row. Table controls are more flexible than step loops, and are intended to replace them
When you need to handle a scenario like in sales order,it may contain more than one material,if you have more than one material We have to use table control,it will have number of columns and number of rows.
Table controls allow you to enter, display, and modify tabular data easily on the screen
Check this code,
PARAMETERS: file1 LIKE rlgrap-filename.
*Internal Table Declarations
DATA: BEGIN OF itab OCCURS 0,
matnr(18) TYPE c, "MaterialNumber
werks(4) TYPE c, "Plant
vdatu(10) TYPE c, "Valid From Date
bdatu(10) TYPE c, "Valid To Date
lifnr(10) TYPE c, "Vendor Number
ekorg(4) TYPE c, "Purchasing Organization
feskz TYPE c, "Fixed
autet TYPE c, "MRP Indicator
END OF itab.
DATA: bdcdata LIKE TABLE OF bdcdata WITH HEADER LINE.
*VARIABLES Declarations
DATA: wa1 LIKE LINE OF itab. "Workarea for ITAB
DATA: n TYPE i, "Check
count TYPE i.
DATA: cnt(2), "Counter
wa(15). "Workarea to hold concatenatedvalue
DATA v_msg(100).
DATA: flag.
DATA: file TYPE string.
*Initialization event
INITIALIZATION.
*At-selection-screen event
*To provide Input help for file name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR file1.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = file1.
*START-OF-SELECTION EVENT
START-OF-SELECTION.
MOVE file1 TO file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*To populate BDCDATA and start data transfer
LOOP AT itab .
To validate Plant range
IF itab-werks = '1000' OR itab-werks = '2000'
OR itab-werks = '1008'.
AT NEW werks.
CLEAR: n.
cnt = 1.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EORD-MATNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EORD-MATNR'
itab-matnr.
PERFORM bdc_field USING 'EORD-WERKS'
itab-werks.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0205'.
CONCATENATE 'EORD-EKORG(' cnt ')' INTO wa.
PERFORM bdc_field USING 'BDC_CURSOR'
wa.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
ENDAT.
IF n = 12.
READ TABLE bdcdata WITH KEY fval = '=BU'.
bdcdata-fval = '=NS'.
MODIFY bdcdata INDEX sy-tabix TRANSPORTING fval.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0205'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EORD-VDATU(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
cnt = 2.
n = 2.
ENDIF.
CONCATENATE 'EORD-VDATU(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-vdatu.
CONCATENATE 'EORD-BDATU(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-bdatu.
CONCATENATE 'EORD-LIFNR(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-lifnr.
CONCATENATE 'EORD-EKORG(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-ekorg.
CONCATENATE 'RM06W-FESKZ(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-feskz.
CONCATENATE 'EORD-AUTET(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-autet.
IF n <> 12.
n = cnt.
ENDIF.
cnt = cnt + 1.
AT END OF werks.
CALL TRANSACTION 'ME01' USING bdcdata
UPDATE 'S'
MODE 'A'.
CLEAR:bdcdata,bdcdata[].
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = sy-msgid
lang = 'EN'
no = sy-msgno
v1 = sy-msgv1
v2 = sy-msgv2
v3 = sy-msgv3
v4 = sy-msgv4
IMPORTING
msg = v_msg.
WRITE:/ v_msg.
CLEAR: bdcdata,bdcdata[],flag.
ENDAT.
ENDIF.
ENDLOOP.
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.
Insert field values
FORM bdc_field USING fnam fval.
IF NOT fval IS INITIAL.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
CLEAR wa.
ENDFORM.
Sample code 2
THis is example to upload the Bank details of the Vendor which has the TC.
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards -
How to use table control in bdc briefly?
how to use table control in bdc briefly in description manner ?
Hi friend,
here i am giving exm. code of table control.see if help full to u.
REPORT zxk_01
NO STANDARD PAGE HEADING LINE-SIZE 255.
include bdcrecx1.
TYPES : BEGIN OF ty_data,
line(100) TYPE c,
END OF ty_data.
PARAMETERS: p_pcfile LIKE ibipparms-path DEFAULT 'D:\NKS.TXT'.
DATA : g_filename TYPE string.
TYPES : BEGIN OF ty_file,
lifnr(16) TYPE c, " vendor
bukrs(4) TYPE c, "company code
ktokk(4) TYPE c, " Acc grp
anred(15) TYPE c, " Title
name1(35) TYPE c, " name
sortl(10) TYPE c, " search term
stras(35) TYPE c, " street
ort01(35) TYPE c, " city
ort02(35) TYPE c, " district
land1(3) TYPE c, " country
pfach(10) TYPE c, " PO BOx
spras(2) TYPE c, " language
kunnr(10) TYPE c, " Customer
vbund(6) TYPE c, " trading partner
banks(3) TYPE c, " BANK COUNTRY
bankl(15) TYPE c, " BANK KEY
bankn(18) TYPE c, " BANK ACC
koinh(60) TYPE c, " ACC HOLDER
bkont(2) TYPE c, " CK
bvtyp(4) TYPE c, " BNKT
bkref(20) TYPE c, " REFERENCE DETAILS
namev(35) TYPE c, " first NAME
name2(35) TYPE c, " NAME
telf1(16) TYPE c, " TELEPHONE
abtnr(4) TYPE c, " DEPTT
pafkt(2) TYPE c, " FUNCTION
akont(10) TYPE c, " REC ACCOUNT
zuawa(3) TYPE c, " SORT KEY
lnrze(10) TYPE c, "HEAD OFFICE
fdgrv(10) TYPE c, " CASH MGMT GRP,
frgrp(4) TYPE c, " RELEASE GRP
zterm(4) TYPE c, " PAY TERMS
togru(4) TYPE c, " TOLERENCE GRP,
reprf, "CHECK DOUBLE INV
zwels(10) TYPE c, " PAYMENTS METHODS
zahls, " PAYMENTS BLOCK
hbkid(5) TYPE c, " house bank
zgrup(2) TYPE c, " grouping key
mahna(4) TYPE c, " dunn procedure
mansp, " DUNNING BLOCK'
gmvdt(10) TYPE c, " LEGAL DONE PROCEDURE
lfrma(10) TYPE c, " DUNN RECEPIENT
madat(10) TYPE c, " LAST DUNNED
mahns(1) TYPE c, " dunning level
mgrup(2) TYPE c, " grouping key
busab(2) TYPE c, "dunning clerk
END OF ty_file.
DATA : BEGIN OF it_xk01 OCCURS 0,
lifnr(16) TYPE c, " vendor
bukrs(4) TYPE c, "company code
ktokk(4) TYPE c, " Acc grp
anred(15) TYPE c, " Title
name1(35) TYPE c, " name
sortl(10) TYPE c, " search term
stras(35) TYPE c, " street
ort01(35) TYPE c, " city
ort02(35) TYPE c, " district
land1(3) TYPE c, " country
pfach(10) TYPE c, " PO BOx
spras(2) TYPE c, " language
kunnr(10) TYPE c, " Customer
vbund(6) TYPE c, " trading partner
akont(10) TYPE c, " REC ACCOUNT
zuawa(3) TYPE c, " SORT KEY
lnrze(10) TYPE c, "HEAD OFFICE
fdgrv(10) TYPE c, " CASH MGMT GRP,
frgrp(4) TYPE c, " RELEASE GRP
zterm(4) TYPE c, " PAY TERMS
togru(4) TYPE c, " TOLERENCE GRP,
reprf, "CHECK DOUBLE INV
zwels(10) TYPE c, " PAYMENTS METHODS
zahls, " PAYMENTS BLOCK
hbkid(5) TYPE c, " house bank
zgrup(2) TYPE c, " grouping key
mahna(4) TYPE c, " dunn procedure
mansp, " DUNNING BLOCK'
gmvdt(10) TYPE c, " LEGAL DONE PROCEDURE
lfrma(10) TYPE c, " DUNN RECEPIENT
madat(10) TYPE c, " LAST DUNNED
mahns(1) TYPE c, " dunning level
mgrup(2) TYPE c, " grouping key
busab(2) TYPE c, "dunning clerk
END OF it_xk01.
internal table for bank detaiils
DATA : BEGIN OF it_bank OCCURS 0,
banks(3) TYPE c, " BANK COUNTRY
bankl(15) TYPE c, " BANK KEY
bankn(18) TYPE c, " BANK ACC
koinh(60) TYPE c, " ACC HOLDER
bkont(2) TYPE c, " CK
bvtyp(4) TYPE c, " BNKT
bkref(20) TYPE c, " REFERENCE DETAILS
lifnr(16) TYPE c, " vendor
xezer, " CHECK
END OF it_bank.
INTERNAL TABLE FOR CONTACT PERSON
TYPES : BEGIN OF ty_cust,
lifnr(16) TYPE c,
namev(35) TYPE c, " first NAME
name1(35) TYPE c, " NAME
telf1(16) TYPE c, " TELEPHONE
abtnr(4) TYPE c, " DEPTT
pafkt(2) TYPE c, " FUNCTION
END OF ty_cust.
INTERNAL TABLES DECLARATION
DATA : it_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE,
it_bdcmsgcoll LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE,
it_file TYPE TABLE OF ty_file,
it_data TYPE TABLE OF ty_data,
it_cust TYPE TABLE OF ty_cust.
WORK AREAS FOR TYPES
DATA : wa_xk01 LIKE it_xk01,
wa_data TYPE ty_data,
wa_file TYPE ty_file,
wa_bank LIKE it_bank,
wa_cust TYPE ty_cust.
*CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = lt_file
filetype = 'ASC'
CHANGING
data_tab = iT_DATA.
IF sy-subrc <> 0.
ENDIF.
g_filename = p_pcfile.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = g_filename "'D:\TESTDATA1_XK01.txt'
filetype = 'TXT'
has_field_separator = 'X'
HEADER_LENGTH = 0
read_by_line = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
replacement = ' '
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = it_file
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT it_file INTO wa_file .
ON CHANGE OF WA_FILE-LIFNR.
wa_xk01-lifnr = wa_file-lifnr.
wa_xk01-bukrs = wa_file-bukrs.
wa_xk01-ktokk = wa_file-ktokk.
wa_xk01-anred = wa_file-anred.
wa_xk01-name1 = wa_file-name1.
wa_xk01-sortl = wa_file-sortl.
wa_xk01-stras = wa_file-stras.
wa_xk01-ort01 = wa_file-ort01.
wa_xk01-ort02 = wa_file-ort02.
wa_xk01-land1 = wa_file-land1.
wa_xk01-pfach = wa_file-pfach.
wa_xk01-spras = wa_file-spras.
wa_xk01-kunnr = wa_file-kunnr.
wa_xk01-vbund = wa_file-vbund.
wa_xk01-akont = wa_file-akont.
wa_xk01-zuawa = wa_file-zuawa.
wa_xk01-lnrze = wa_file-lnrze.
wa_xk01-fdgrv = wa_file-fdgrv.
wa_xk01-frgrp = wa_file-frgrp.
wa_xk01-zterm = wa_file-zterm.
wa_xk01-togru = wa_file-togru.
wa_xk01-reprf = wa_file-reprf.
wa_xk01-zwels = wa_file-zwels.
wa_xk01-zahls = wa_file-zahls.
wa_xk01-hbkid = wa_file-hbkid.
wa_xk01-zgrup = wa_file-zgrup.
wa_xk01-mahna = wa_file-mahna.
wa_xk01-mansp = wa_file-mansp.
wa_xk01-gmvdt = wa_file-gmvdt.
wa_xk01-lfrma = wa_file-lfrma.
wa_xk01-madat = wa_file-madat.
wa_xk01-mahns = wa_file-mahns.
wa_xk01-mgrup = wa_file-mgrup.
wa_xk01-busab = wa_file-busab.
APPEND wa_xk01 TO it_xk01.
CLEAR : WA_XK01.
CONTINUE.
ENDON.
IF WA_FILE-BANKS NE ''.
wa_bank-lifnr = wa_file-lifnr.
wa_bank-banks = wa_file-banks.
wa_bank-bankl = wa_file-bankl.
wa_bank-bankn = wa_file-bankn.
wa_bank-koinh = wa_file-koinh.
wa_bank-bkont = wa_file-bkont.
wa_bank-bvtyp = wa_file-bvtyp.
wa_bank-bkref = wa_file-bkref.
wa_cust-lifnr = wa_file-lifnr.
wa_cust-namev = wa_file-namev.
wa_cust-name1 = wa_file-name2.
wa_cust-telf1 = wa_file-telf1.
wa_cust-abtnr = wa_file-abtnr.
wa_cust-pafkt = wa_file-pafkt.
APPEND wa_bank TO it_bank.
APPEND wa_cust TO it_cust.
APPEND wa_xk01 TO it_xk01.
CLEAR : wa_bank , wa_cust.
ENDIF.
ENDLOOP.
START-OF-SELECTION.
LOOP AT it_xk01 INTO wa_xk01.
REFRESH it_bdcdata.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
wa_xk01-lifnr. " vendor
PERFORM bdc_field USING 'RF02K-BUKRS'
wa_xk01-bukrs. " company cpode
PERFORM bdc_field USING 'RF02K-KTOKK'
wa_xk01-ktokk. " Acc group
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
wa_xk01-anred. " title
PERFORM bdc_field USING 'LFA1-NAME1'
wa_xk01-name1. " name
PERFORM bdc_field USING 'LFA1-SORTL'
wa_xk01-sortl. " ' search term'
PERFORM bdc_field USING 'LFA1-STRAS'
wa_xk01-stras. "street'
PERFORM bdc_field USING 'LFA1-PFACH'
wa_xk01-pfach. " po box
PERFORM bdc_field USING 'LFA1-ORT01'
wa_xk01-ort01. " city
PERFORM bdc_field USING 'LFA1-ORT02'
wa_xk01-ort02. " district
PERFORM bdc_field USING 'LFA1-LAND1'
wa_xk01-land1. " country
PERFORM bdc_field USING 'LFA1-SPRAS'
wa_xk01-spras. " language
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-VBUND'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-KUNNR' " customer
wa_xk01-kunnr.
PERFORM bdc_field USING 'LFA1-VBUND'
wa_xk01-vbund. " trading partner
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BKREF(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
DATA : fnam(20) TYPE c,
int TYPE c.
MOVE 1 TO int.
CLEAR wa_bank.
LOOP AT it_bank INTO wa_bank WHERE lifnr = wa_xk01-lifnr.
CONCATENATE 'LFBK-BANKS(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-banks. " city
CONCATENATE 'LFBK-BANKL(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bankl.
CONCATENATE 'LFBK-BANKN(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bankn.
CONCATENATE 'LFBK-KOINH(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-koinh.
CONCATENATE 'LFBK-BKONT(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bkont.
CONCATENATE 'LFBK-BVTYP(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bvtyp.
CONCATENATE 'LFBK-BKREF(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bkref.
int = int + 1.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0380'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KNVK-PAFKT(05)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
DATA : fnam1(20) TYPE c,
cnt.
cnt = 1.
CLEAR : wa_cust.
LOOP AT it_cust INTO wa_cust WHERE lifnr = wa_xk01-lifnr.
CONCATENATE 'KNVK-NAMEV(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-namev.
CONCATENATE 'KNVK-NAME1(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-name1.
CONCATENATE 'KNVK-TELF1(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-telf1.
CONCATENATE 'KNVK-ABTNR(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-abtnr.
CONCATENATE 'KNVK-PAFKT(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-pafkt.
cnt = cnt + 1.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0380'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KNVK-NAMEV(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FRGRP'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
wa_xk01-akont. " REC aCC
PERFORM bdc_field USING 'LFB1-ZUAWA'
wa_xk01-zuawa. " SORT KEY
PERFORM bdc_field USING 'LFB1-LNRZE'
wa_xk01-lnrze. " HEAD OFFICE
PERFORM bdc_field USING 'LFB1-FDGRV'
wa_xk01-fdgrv. " CASH MGMT GRP
PERFORM bdc_field USING 'LFB1-FRGRP'
wa_xk01-frgrp. " RELEASE GRP
PERFORM bdc_field USING 'LFB1-CERDT'
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZGRUP'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-ZTERM'
wa_xk01-zterm. " PAYMENT TERMS'
PERFORM bdc_field USING 'LFB1-TOGRU'
wa_xk01-togru. " TOLERENCE GRP
PERFORM bdc_field USING 'LFB1-REPRF'
wa_xk01-reprf. " CHECK DOUBLE INV
PERFORM bdc_field USING 'LFB1-ZWELS'
wa_xk01-zwels. " PAYMENT METHOD
PERFORM bdc_field USING 'LFB1-ZAHLS'
wa_xk01-zahls. " PAYMENT BLOCK
PERFORM bdc_field USING 'LFB1-HBKID'
wa_xk01-hbkid. " HOUSE BANK
PERFORM bdc_field USING 'LFB1-ZGRUP'
wa_xk01-zgrup. " GROUPING KEY
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-BUSAB'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB5-MAHNA'
wa_xk01-mahna. " DUNN PROCEDURE
PERFORM bdc_field USING 'LFB5-MANSP'
wa_xk01-mansp. " DUNNING BLOCK
PERFORM bdc_field USING 'LFB5-LFRMA'
wa_xk01-lfrma. " Dunn representative
PERFORM bdc_field USING 'LFB5-GMVDT'
wa_xk01-gmvdt. " legal dunn proc
PERFORM bdc_field USING 'LFB5-MADAT'
wa_xk01-madat. " last dunned
PERFORM bdc_field USING 'LFB5-MAHNS'
wa_xk01-mahns. " dunn level
PERFORM bdc_field USING 'LFB5-BUSAB'
wa_xk01-busab. " dunning clerk
PERFORM bdc_field USING 'LFB1-MGRUP'
wa_xk01-mgrup. " grouping key
CALL TRANSACTION 'XK01' USING it_bdcdata
MODE 'A'.
ENDLOOP.
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR it_bdcdata.
it_bdcdata-program = program.
it_bdcdata-dynpro = dynpro.
it_bdcdata-dynbegin = 'X'.
APPEND it_bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field
FORM bdc_field USING fnam fval TYPE any.
CLEAR it_bdcdata.
it_bdcdata-fnam = fnam.
it_bdcdata-fval = fval.
APPEND it_bdcdata.
ENDFORM. "bdc_field
*perform close_group. -
Could someone please tell me where I can info on how to use the controls I.e live pause,forward,rewind etc when watching live shows on my ipad mini please.
well, i can't really tell if i am only allowed one connection with this isp. basically, whenever i plug in the ethernet cord, all of the information gets filled in in the ethernet section of the network, except for the router info. there is router info filled in on my sister's computer whenever i plug the cord into her computer, though. does that mean i can't also use the modem for my computer? sorry, this is both my first time using a mac and my first time using anything other than dial-up, so i'm pretty lost. thanks for the info you've given me thus far.
-
How to use the App Store wish list
I Can't figure out how to use the App Store wish list...if anybody can answer this for me I would love that.
Hi dlissor,
The following article describes the Wish List and how to use it -
iTunes Store: How to use Wish List
http://support.apple.com/kb/HT1368
Thanks for using Apple Support Communities.
Best,
Brett L -
DELIVERY How to use copying control to control print process?
Hi All,
I recieved a request as this when material no. is 111, then do not auto print the delivery note out.
Delivery note output type is ZXXX.
So is there any idea to use copying control to control this ?
Thank you in advance.
RichardHi there,
No need of copy controls for this. Delivery note is printed from delivery. So why do you need copy controls?
When defining O/p determination procedure for your O/p ZXXX, in the requirement routine, check the values of LIPS-MATNR. If LIPS-MATNR = 111, donot print the delivery note for that item (LIPS-POSNR). I guess you will need to define a new Z routine for this. Dont change the standard routine.
Regards,
Sivanand -
hi,
I created an entity bean and I created an ejb control. Now I would like to
use this ejb control inside of a jsp (no page flow).
When I use the ejb without the control I do the follwing steps :
- get the local home
- call finder methode
- get the local object
- call getMethod() and display content
Can someone please post an example how to use the netui-data tags to do this
steps or do I have to use the controls in a total different way?
Can someone please tell me how to use the ejb control inside a normal java
class?
MichaelDo you want to use taglibs or develop custom tags? Either way take a look at these:
http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/JSPTags.html
http://www.stardeveloper.com/articles/display.html?article=2001081301&page=1
http://www.onjava.com/pub/a/onjava/2000/12/15/jsp_custom_tags.html
http://jakarta.apache.org/taglibs/tutorial.html
http://www.ibm.com/developerworks/edu/j-dw-java-custom-i.html
http://www.herongyang.com/jsp/tag.html -
How to use Tree control like a Tree in SAP HANA Live Browser?
Hello SDN!
I need a Tree control such as following:
As I understand, there is no such standard control in SAPUI5 control library. Is it possible to use this control? If yes, how I can embed it in my app?
Regards,
LevHi Sandip!
Thanks for your tip. I've applied this example to my app. Tree is working now, but this is a little problem - on each expand/collapse and click on treeItem the onAfterRendering() method called. It means that the complete rerender of tree executed which looks not good. How I can avoid this?
Lev -
How to use custom control in Dialog Programming?
How can I call a subscreen using custom control in Dialog Programming?
The required subscreen contains a calender. Any class or something available for this purpose. Please suggest.As [vinraaj|http://forums.sdn.sap.com/profile.jspa?userID=3968041] wrote, call transaction SE51, there is a Wizard to help you generate the table control, it will create the table control and some includes with PBO/PAI modules > Read [Using the Table Control Wizard|http://help.sap.com/saphelp_bw/helpdata/en/6d/150d67da1011d3963800a0c94260a5/frameset.htm]
Also there is a tutorial in the wiki, read [Learn Making First Table Control |http://wiki.sdn.sap.com/wiki/display/ABAP/LearnMakingFirstTableControl] by [Krishna Chauhan|http://wiki.sdn.sap.com/wiki/display/~nc0euof]
Regards,
Raymond -
How to Use calender control in cloud buissnes app in visual studio 2013
Hi all,
I have a task to use calender control in cloud business app in visual studio2013 how to use
so please let me know if any one knows.to solve issue
Thanking you,
ArunDarlyHi,
We can use jQCalendarPart or other jQuery calendar control in SharePoint app.
The following link for your reference:
http://jqcalendarpart.codeplex.com/
Best Regards,
Dennis Guo
TechNet Community Support -
"How to use CWIMAQ control for delphi 6.0 professional?"
I'm using frame grabber card PCI-1424 of yours and i'm developing my application in Delphi 6.0 Professional. So can anyone guide me how to use the NI controls in delphi application? Thanks in advance.
Hello,
Are you using ComponentWorks IMAQ Vision? If so, there is a chapter of the ComponentWorks IMAQ Vision manual that deals with the development of applications for Delphi.
Getting Results with ComponentWorks IMAQ Vision
http://digital.ni.com/manuals.nsf/webAdvsearch/118D3E816C49EF06862566C5006CC7E7?OpenDocument&vid=niwc&node=132100_US
National Instruments no longer supports the development of applications in Delphi, but Chapter 5 of that manual should get you started. The instructions in the manual may need to be updated depending on what functions you use. This is due to upgrades that have occurred since that manual was created.
Take a look at the manual and let me know if you have any additional questions on this issue.
Regards,
Scott R.
Ap
plications Engineer
National Instruments
Maybe you are looking for
-
Error while parsing JSP with WebLogic 5.1/SP9/JDK 1.2.2
Hello everybody, I get the error given below when calling a JSP in a WebLogic application which seems to work fine in all other (non-JSP) parts: java.lang.NullPointerException: at weblogic.servlet.jsp.JspL
-
Unable to Connect to Backup Volume After Upgrade to 10.5.4
After I have upgraded to 10.5.4, I could not connect to Time Machine. It seems to be stuck forever "Connecting to backup volume ..." I could connect to the Time Capsule storage. In the console, I have the following: 7/12/08 8:05:08 PM /System/Library
-
On ipod g4, when I edit playlists, the songs no longer stay in the order that I put them when I press DONE. Worked fine till a day ago.
-
How do you write a deterministic clause?
How do you write / code a deterministic clause? I was told to use it instead of Target buckets Thanks,
-
Hey, Ive bought and ipod , without reading the description, silly me and it says the ipod wont turn on at all......ive tried the manual reset ( menu and middle button) still not working at all. I wondered if anyone had any advice, whether theres anot