How to use profile vis
How to use profile dialog box to get information about VI execution time and
its sbvi's ?
Gregor
> Open the top level VIs. Select profile VIs from the tools -> advanced
> menu...Check the timing statistics and timing details boxes and click
> the run button of the profiler. Now run the VIs.
>
> To see the timing statistics while the VIs are still running click the
> snapshot button of the profiler.
This is a good description, but to add just a little more info. The
profiler adds information when a VI completes. This means that a
top-level diagram won't get the profiling info written to it until the
top VI diagram is completed. If you want that info in the profiling,
run the program to completion, then Stop the profiling.
Greg McKaskle
Similar Messages
-
How to Use Profiler in ORACLE 10g
Hi all,
Anybody know how to use profiler in oracle 10g and also i couldn't able to install the enterprise manager console.is there any tools available for that.because i need to trace the execution of a stored procedure.waiting the reply.
SathishHi,
>>Anybody know how to use profiler in oracle 10g
What do you mean "profiler". About Resource Limits/Create Profiles ?
>>i couldn't able to install the enterprise manager console.
What OS ?
>>because i need to trace the execution of a stored procedure.waiting the reply.
Debug ? You can use SQL Developer, TOAD, PLSQL Developer for this purpose.
Cheers -
How to use multiple visa read in one program
hi
i am working at Hameg HM8143 power supply i want to measure voltage and current simultaneiously and use the measured values for further calculations. for this i used two visa read blocks.
>>>>>>the measured values are shown in the same visa read string however i want it to be shown sepetately,
>>>>>>One of the VISA read block gives error. so i want to know how to use VISA read to get current and voltage simultaneously in seperate strings
>>>>>>than how to convert strings to numbers for using them for my calcultions.
i am attaching screen shot as well
Attachments:
screenshot.JPG 164 KByou can not use a single serial to send 2 commands simultaniously?
There is a single serial line so one command has to be before another. This doesnt mena that you can not read from 2 seperate threads but will have to ensure that there is a locking mechanism to make sure that your queries are atomic. In labview encapsulating all communications can be done with an action engine which will allow for concurrent execution with automatic blocking of your resource (serial device).
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA -
How to use a visa gift card in itunes store
Can you use a visa gift card in the itunes store and if so how do you set it up?
You cannot.
Gift cards are country specific.
You cannot use the U.S itunes store from the U.K.
Send the card back to someone in the U.S who can use it. -
How to use $PROFILES$CONC_COPIES in plsql
Can you give me an example of using $PROFILES$.CONC_COPIES in plsql? I need to change a plsql program to product 2 set of output reports each time when the job is run. User doesn't to change user profile option number of Concurrent copies. Thanks.
I thought you said you knew how to use/create profiles in your previous post...
This is the quick rundown: Just as with regular profiles, you first need to make sure that your content has the profile trigger metadata field assigned when it's created. This is done within designer under "Switch region content" definition of your contribution region. Assign the "Profile Trigger Value" under "Default Metadata" and then assign that idoc to the activation condition of your content profile rule. -
hi, everybody.
glad to post my problem here. i hope somebody would help me .
I am going to design an audio system on Blackfin533 Ez-kit. but i cannot know how to use the BF AD1836 wait on data ready flag.vi .
where can i get the tutorial for the VIs (ad1836) ?
thanks for your help.Hello,
The AD1836AAS is just a particular model of the AD1836A. For details on the differences between the models, take a look at the 1836's product page at http://www.analog.com/en/prod/0%2C2877%2CAD1836A%2C00.html The 1836AAS is fully compatible with the example, and worked quite well with my 533 EZ-Kit.
To help you further with the example, first I'll need to know which version of the LabVIEW Embedded for Blackfin Module that you are using, as the steps to troubleshoot are a little different for each version.
I'm also curious to know if you can hear any part of your audio signal being passed through, or if the original signal you send into the board comes out garbled, if it stutters, or if all you hear is noise or silence. Additionally, I recommend trying to rebuild the example with Build Configuration "Release" and Debug Mode "None". This will disable all debug options and allow the code to run more efficiently on the chip.
If the above still does not work after compiling, downloading and running the application, I would next check the switch settings and connectors on your EZ-Kit to ensure that they match the requirements listed on the front panel of the VI:
Set SW9 switch 5-On, 6-On
Connect an audio source to audio in (ADC1)
Connect speakers to audio out (DAC1)
Let me know what version you're using, the details above, and what the results of the above suggestions was and we can take it from there.
Cheers,
Matt Pollock
National Instruments -
How to use filter vis and peak detectors in compactRio
Hi all,
We are
using compact rio 9002 with IO module 9215. We are accessing a sine
wave(of 1 KHz) input with some DC components in it. We need to filter
out the DC and get the peak value of that sine wave. We have developed
a program to acquire the same. But the problem we are facing is we are
not able to filter out the DC and get the peak values inspite of using
the filter and peak detector VI's. Suggest the reason and the solution.
Regards,
Labview Lovers.Hi Shivkumar,
If you need to filter out the DC portion of the signal before you acquire the signal you may want to consider implementing AC coupling. Which particular Filter and Peak VIs are you using?
Regards,
Bassett -
How to use Profiler/XE to capture connection string properties (eg effectiveusername)
Hi all,
I'm trying to audit connections to a tabular cube to map usage patterns etc etc
Problem is, any connections made via sharepoint come in using the sharepoint excel services account. The actual user that is making the connection is passed in via the EffectiveUser property on the connection string. I've not been able to find any info on
how to add this to an extended event trace. Is it possible?
Cheers,
Jakub
Jakub @ Adelaide, Australia BlogHi jakubk,
Glad to hear that the issue is resolved. Thanks for your sharing, other community members could benefit from your solution.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support -
How to use ICC profiles and soft proofing profiles?
Hi,
I got an Epson Stylus Pro 3880 and Epson Hot Press paper which, upon investigation, received great profeesional reviews and, having never printed digitally before, I don't know how to use profiles for soft proofing or printing.
I don't know where to go in Aperture or what to do. My driver is up to date and I downloaded the paper profile - not sure where it ended up. What's next?
So far as I know, soft proofing is about calibrating the monitor to the paper - am I correct?
Thanks guys,
RaphaelRaphael,
A good reply is going to require a full-size keyboard, which I don't have access to just now. Here are some starter pages:
http://www.cambridgeincolour.com/tutorials/soft-proofing.htm
http://www.luminous-landscape.com/tutorials/soft-proofing.shtml (a bit grumpy and out-dated)
Fwiw, I print to Epson Hot Press using a 3880. Imho, it's a _great_ printer, and that combination of printer and paper produced state-of-the-art results. (Not suitable in all cases, but if that is a look you like, the only thing that I've seen that surpasses it is the Epson 9900, and without looking at prints side by side you can not tell them apart.)
Your profile ended up wherever you have told your browser to save downloaded files. The Epson site should provide instructions on where to move the file. Once it is in the right Finder folder, when you next Aperture it should show in your list of profiles.
Keep in mind, though, that soft-proofing is useless without a well (read: hardware-calibrated) calibrated display.
HTH,
--Kirby.
(Sent from my magic glass.) -
How to use iframes in oracle 10g
I have to load two jsp pages in a single html . I have done that thru iframes. But i have to dynamically load the second jsp page in the frame 2 , when the user clicks upon certain details in the frame 1 jsp page. I have wriiten the code of document.iframe in format trigger attribute. It doesn't work. Is there any other way to achieve this. I want to load the frame 2 jsp page dynamically , according to the input i get from frame 1 jsp page.
Hi,
>>Anybody know how to use profiler in oracle 10g
What do you mean "profiler". About Resource Limits/Create Profiles ?
>>i couldn't able to install the enterprise manager console.
What OS ?
>>because i need to trace the execution of a stored procedure.waiting the reply.
Debug ? You can use SQL Developer, TOAD, PLSQL Developer for this purpose.
Cheers -
Loading profile using -profile "path" in most recent WIN32 Nightly build.
I was accustomed to loading a specified path to a folder containing a user profile, which worked for me previously from a shortcut that points to the executables path and '-profile "path to folder" ' . . I am looking to reinstate the browsers capacity to load said profile, as I rather liked that feature. Thank you for your help and continued patience.
wubalubadubdubThese articles should help, if you've forgotten how to use -profile "path" from the command line or Firefox shortcut
http://kb.mozillazine.org/Bypassing_the_Profile_Manager
http://kb.mozillazine.org/Shortcut_to_a_specific_profile -
How do I use the VIs for the Fluke Hydra Series 2620a multimeter?
This message refers to the VIs found at this link:
http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E9468659CE034080020E74861
How do I use the VIs for the Fluke Hydra Series 2620a multimeter? I am conducting a Senior Design Project at Temple University. It is a Control System where I need to read voltages from sensors and output voltages to different system components. I am trying to set up a VI using the VIs found above to make sure that I can successfully read and send voltages. There was no documentation given with the 2620a VIs.Unfortunately, you've got a very old driver for an old instrument. The only available help is to turn on Context Help and move your mouse over the VI icon. It doesn't appear to have any help for individual controls and indicators. The only good news is that it appears to be a simple instrument with only a few functions. There's some main ones line initialize (to set serial port), configure channel, configure instr, and read values. One main thing is whether you're using gpib or serial, Each front panel has a setting. If it's gpib, set the port to the gpib address. If it's serial, set the port to one number less than the com port you're connected to. For example, if you're using Com1, set the port to 0. For the other controls, I'm afraid that you're going to have to try and compare what's there with the controls and settings of the actual instrument. Having access to the instrument manual will be essential. I would engourage you to experiment a little. There's probably very little chance of damaging the instrument especially if nothing is hooked up to it. Send a command and see what happens or set the instrument up manually and see if you can reproduce that via remote control.
-
please help how do you delete visa from my account? I put in Itunes card and it shows my 15.00 credit but cannot download tunes. What do I need to do? I think visa card is issue
I own the movies and I want them to stay in my iTunes library basically forever.
But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud.
iTunes prefs > Store > Show iTunes in the Cloud purchases.
This will show all your iTunes purchases in your library with a cloud icon down arrow. Click the icon to redownload or click on Play to stream without downloading.
Also see this , -> Download past purchases
and techncially, you don't "own" the movie, You simply have a license to use it.
Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library.
Actually, no it does not tell you that.
FYI: You should keep copies of all yoru iTnue spurahses as the labels/movie studios/copyright owners can pull their product at anytime and it won't be available to redownload.
Suggestions here -> http://www.apple.com/feedback/ -
How can i create an apple id without using a visa or credit card
how can i create an apple id without using a visa or credit card
Follow the directions here, EXACTLY:
http://support.apple.com/kb/ht2534 -
I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me
Here's a quick example I threw together that generates a sort-of-bell-curve shaped data distribution, then performs the binning and plotting.
-Kevin P.
Message Edited by Kevin Price on 12-01-2006 02:42 PM
Attachments:
Binning example.vi 51 KB
Binning example.png 12 KB
Maybe you are looking for
-
Pdf form created in Acrobat 9 Pro Extended does not function properly when viewed by Reader
Hello all- I have created a form in Acrobat 9 Pro Extended and have an issue because when others view the form in Adobe Reader some of the functions do not work- such as the attach a file button I created, or the save, print buttons (all are execute
-
Integrated scroll panels and unmovable toggle buttons
Hey, iam looking for an expert. I am working on an HMI development and wanted to use Flash Catalyst. However, I think I am already reached the limits of FC. But perhaps there is a FC solution because I can not program Flash. Problem: In my layer, I h
-
HI all, I am getting Two address fields from Source side (Sender name, city, country etc & Receiver name, city, country etc). But at the target side (IDOC) has only one Name, city and country fields. how to map these two name, city, country etc field
-
HTML Editor Kit adding extra characters...urgent
I am facing a strange problem in using HTML Editor Kit. I am using JTextPane to display the HTML data, which will support bold, italic and underline formatting. The problem is, when I 1]Enter some text of length more than 71, with some spaces in
-
.