How to use proxy settings for one website

Hello,
I have to access the only one website using Proxy settings and for others I don't need proxy to access. Is there a way to configure the internet settings to allow one website using Proxy... Please advise. Thanks!
Regards,
Aravin S

I am also getting this "error".  The printer (8500 A910) connected to the web well enough that it went out and supposedly downloaded a new update, but then it was supposed to print a page showing the email address, but did not.
So I go in and try to set up the eprint, and it tells me it cannot connect to the sever and I'll need to enter a proxy address and port number.  But my ISP's cable modems do NOT have any static IP address nor do they provide any sort of proxy service.  Everything works just fine with "automatic discovery" (DHCP) for every computer in the house.  No problems there.
So, since  that's the case, of course I cannot look up some proxy address and port number in my web browser because they're all set up for "automatically detect settings".
What's baffling is that the printer connected to something at HP to download the "update", and it went through a process that appeared to be what I'd expect it to do if it was updating its firmware.  But it won't connect to whatever it's supposed to connect to to have an email address assigned.
Does HP supply a proxy server?  If so, what's its IP address or URL, and what port should a person set the printer to try to use?
UPDATE:
It appears that the HP site must have just been "down" for about six or seven hours while I was trying to get the printer to connect because it now connected and I got an email address asigned without needing to have any "proxy" stuff set up at all.  It's a shame that the printer does not simply report "HP Site down - try again later" instead of reporting that you need to use a proxy when that's impossible.
"Now, on to the next problem which is that my emails to the assigned address are all bouncing with a "550 5.7.1 Command rejected" error!

Similar Messages

  • How to use select statement for one field

    I want to fetch the data from table and only one field  , the below code i written is correct or not , because only for one field i used endselct  if i am not giving endselect it is  showing error. Please suggest me.
    DATA : SBELN TYPE VBAK-VBELN.
    parameters : s_vbeln type vbak-vbeln.
    select vbeln from vbak into sbeln
    where vbeln = P_VBELN.
    endselect.

    Hi ,
    As because you want single field but not single record so SELECT  SINGLE is not correct .
    You need to create a internal table with the field of VBELN.
    Then you need to fetch the records from the VBELN field of table VBAK.
    Try this code --
    DATA : t_itab like table of VBAK-VBELN.
    parameters : s_vbeln type vbak-vbeln.
    select vbeln from vbak into table t_itab
    where vbeln = s_VBELN.
    Regards
    Pinaki

  • How to check proxy settings for android

    Hi...when i try to go to youtube in mozilla android, it won't go at all and gives me a message to check my proxy settings...I tried as I may ...could not find or know what proxy to change...see no network options like my "Windows computers"...which I have set for "no proxy" ...pity...I added a lot of cool features to firefox and can't go to youtube and some other sites too.*john

    Hey John,
    I am sorry to hear that on mobile the Firefox for Android is asking to check the proxy. Does this happen on multiple networks?
    If there is a proxy it should be listed in about:networking. Plug that into your url and see if there is a proxy listed.
    There is also a nifty add on [https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CCYQFjAB&url=https%3A%2F%2Faddons.mozilla.org%2Fen-US%2Fmobile%2Faddon%2Fproxy-mobile%2F&ei=0n5JVM_AJtCmyATo34KICg&usg=AFQjCNEiZyw3XPMF0dUWJN36Lv5rJnKtKg&bvm=bv.77880786,d.aWw Mobile Proxy] that might be able to list them.

  • How to use Proxy Settings in swf?

    Hi ,
        I am using swf inside an MFC application. Both MFC applciation and swf can call web pages(some web services). Everything was working fine until my company added a proxy server. I have made changes to the MFC application and that can communicate through proxy server but swf is still not able to call remote services.
    Where should I make changes in swf to call remote service through proxy? I just want to know which class or property should I use? There should be some propety to specify that I want to make a request through Proxy server on some port with a username and password.
    - Rahul

    I've resolved it : proxy settings can be modified in <PT_HOME>/settings/common/serverconfig.xml
    It was not easy to find it, there's no doc talking about this

  • How to use proxy settings to join a Remote Server ?

    I have a problem to configure a Remote Server : my portal is behind a proxy, to access to the remote server, I have to make some proxy settings. I've tried to use -Dhttp.proxyHost and -Dhttp.proxyPort but they have no effect
    It seems like that the portal ignore completely my proxy settings
    Any idea to resolve this ?
    Thanks

    I've resolved it : proxy settings can be modified in <PT_HOME>/settings/common/serverconfig.xml
    It was not easy to find it, there's no doc talking about this

  • HOW TO USE J1IJ TWICE FOR ONE DELIVERY

    Hi,
    I had punched Sales order for 3 line items, i made the the delivery and also did the PGI for the same.
    After that when doing the Excise invoice selection thru T.code J1IJ there i had selected only two line items instead of 3 and save the document.
    After that created invoice for the same. what has happened was system did the billing for two line items only.
    now system is not allowing to do the J1IJ for the item which is left out.
    Can anybody resolve this issue.

    Hi ,
    As because you want single field but not single record so SELECT  SINGLE is not correct .
    You need to create a internal table with the field of VBELN.
    Then you need to fetch the records from the VBELN field of table VBAK.
    Try this code --
    DATA : t_itab like table of VBAK-VBELN.
    parameters : s_vbeln type vbak-vbeln.
    select vbeln from vbak into table t_itab
    where vbeln = s_VBELN.
    Regards
    Pinaki

  • Is there a limit to how many pages i can have for one website using muse/business catalyst?

    is there a limit to how many pages i can have for one website using muse/business catalyst?

    Thank you. I've been searching everywhere and I couldn't find anything the mentioned it. I appreciate the feedback!

  • I have lost the correct proxy settings for the ethernet connection using Safari.  How do I get back to the original ethernet proxy settings?

    I changed the ethernet proxy settings for Safari on my Mac Pro, when I was in a particular place that required extra security.  Now I cannot get the ethernet connection to work when back home.  The wireless connection works fine.  What are the original ethernet proxy settings.  How do I make the changes?
    Thanks

    From your Safari menu bar click Safari / Preferences then select the Advanced tab. Click Change Settings next to Proxies. Select Automatically from the Configure pop up menu.
    You may also have to select the Proxies tab. If any of the boxes are selected, deselect then click OK.

  • How can I keep the cookie history for one website while not allowing it for others?

    My privacy setting is set to clear history, cookies, etc whenever I close out of Firefox. As a result, one website I use frequently re-asks security questions after I log-in even though I tell it that it should remember and recognize my private computer. According to the web tech support, it is because my cookies are being deleted. She said in Windows Vista, she found a way around that. I have Windows 7, but have not figured it out yet.
    I would like to be able to specify which websites I want to be able to keep cookies for my computer. How do I do that?

    Let all cookies expire when you close Firefox.
    * Tools > Options > Privacy > Cookies: "Keep until": "I close Firefox"
    Make an Allow exception for the ones that you want to keep.
    * Tools > Options > Privacy > Cookies: "Exceptions"
    You can inspect and modify the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    Tools > Options > Privacy > Firefox will: "Use custom settings for history"

  • I have selected "Use custom settings for history" and pressed "OK" but it defaults back to "Remember history", how do I stop this?

    I have to enable cookies in order to have an online purchase credited to my mileage account. So, I opened Firefox Tool and selected Options then Privacy. There, I changed "Remember history" to "Use custom settings for history," as, this will achieve what I am trying to do. However, when I press "OK" the box jumps back to the Privacy box and I see that "Remember history" is still the setting. What steps do I take to prevent the Privacy box from defaulting to "Remember history" when I want to change that setting to something else?

    The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
    Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
    If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
    "Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
    Do you have a problem with the cookies?
    You can inspect and manage permissions for the domain in the currently selected tab via these steps:
    *Click the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location/address bar
    *Click "More Information" to open "Tools > Page Info" with the Security tab selected
    *Go to the Permissions tab (Tools > Page Info > Permissions) to check the permissions for the domain in the currently selected tab
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

  • How could I set the proxy settings for just some URLs and not for all?

    Hello,
    I am using HttpURLConnection to establish a HTTP connection . The connection pass through a proxy, and it requires security.
    I know that I can set the proxy settings in the system properties, and this works perfect.
    But I don't want to set the proxy settings in the system properties, because this proxy settings will be for ALL the URLs, and I just want for a few URLs.
    How could I set the proxy settings for just some URLs and not for all?
    Thanks

    java.net.URL.openConnection(java.net.Proxy proxy)
    @since 1.5

  • Where can I read the proxy settings Firefox chose, when configured to use "Auto-detect proxy settings for this network"?

    I would like to set my system network proxy settings to those, Firefox chose. Firefox is configured to use "Auto-detect proxy settings for this network" and this works fine. How can I read out the settings Firefox chose, so I can adapt these system?

    Hello Richard,
    Download MozBackup and make a backup of your bookmarks and passwords. Uninstall firefox and remove ALL folders with the name "Firefox".
    Install Firefox and restore your bookmarks and passwords. Now you should have a fresh install so you have to make all settings again.

  • How to provide security settings for the adobe form using livecycleDesigner

    Hello,
    I am very new to form designing,
    can any one please tell me how to provide security settings for the adobe forms at client side?
    Regards,
    Menaka

    Hi,
    that is a good topic for the ADFS forum.
    ADFS forum - http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
    But you could pass the user-agent as incoming claim type Client User agent. User-agents can be manipulated, so if that is an issue you can look into Device Registration and the Device OS type from there. That is also a incoming claim but requires DRS and
    DRS is not available for all plattforms.
    Hth,
    Lutz

  • When I try to set my 'History Setting' to 'Use custom settings for history' it doesn't appply - it continually defults to 'Never Remember History' - how do I fix it?

    When I got into my 'History Setting' and click on 'Use custom settings for history' it doesn't apply. I click on the 'OK' tab and it appears to apply and then closes. When I go back into it, in order to see if it applied, it has reset back to the 'Never Remember History'. How do I fix it?

    If "Never Remember History" is displayed then that means that you are in Private Browsing mode and that all other history settings have the default value.
    *https://support.mozilla.com/kb/Private+Browsing
    If you intend to run Firefox in Private Browsing mode the that is OK.<br />
    Otherwise you need to leave mode.
    To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Deselect: [ ] "Permanent Private Browsing mode"

  • Can any one suggest me how to use drawPixels method for 40 series devices

    Hello!
    I am using drawPixels method of DirectGraphics class the code I have written is :-
    Image offscreen=DirectUtils.createImage(width,height,0x00000000);// width and heights are integer value
    public final int MODEL=DirectGraphics.TYPE_INT_8888_ARGB ;
    Graphics offgra = offscreen.getGraphics();
    DirectGraphics directgraphics = DirectUtils.getDirectGraphics(offgra);
    directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,MODEL); // imgData is a int array(int imgData[]) which contains required pixels of image.
    The above code is working fine with NOKIA 60 series device but when i use it with NOKIA 40 series device it gives java.lang.IllegalArgumentException.
    same time if i use :-
    directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,DirectGraphics .TYPE_USHORT_4444_ARGB ) ;
    // imgData is a short array(short imgData[]) which contains required pixels of image. i have used different formet here.
    it works fine with 40 series device,
    can any one suggest me how to use drawPixels method for 40 series devices with format
    DirectGraphics .TYPE_INT_8888_ARGB .

    If Remote wipe is activated it can't be undone. And Once the Wipe is done, the device can nö longer be tracked.
    Sorry.

Maybe you are looking for

  • Profit Center Split

    Dear Experts, We are using old Profit Center Accounting(EC-PCA). We have busing a business requirement one Profit Canter needs to be created as TWO Different Profit Centers. EG: PCA 'X' to be split as PCA 'Y' and PCA 'Z' and all open balances have to

  • The I Pod Touch Is Frozen. Only I Tunes Logo and USB Cable Image

    I was doing the new download and it said there was an error completing the upload.. Now the only image on the screen is the I Tunes logo and the USB cable image. It will turn off but do nothing else. I tried resetting it and nothing happens. It will

  • Untrusted connection Error when using google search field in top line. Ok with other search engines

    When opening www.google.dk and searching from the page, everything is ok When using Google search engine in the address line search bar the error is present When changing to Yahoo, bing or another search engine in the search bar, the error is not pre

  • Slow Oracle Forms 10gR2 using  Sun's JRE on Windows 7 x64

    Hi, We are running Application Server 10gR2 10.1.2.3 and we've been running Sun's JRE on Windows XP SP3 just fine. It is snappy and with the exception of a couple of minor issues, everything works well. We are now testing a few new workstations runni

  • Phone will not go directly to text msg anymore

    All of a sudden when receiving a text, it won't go directly to it like it use to.  Now it goes to the last app I was using.  ***????  I've gone through all the settings but don't see anything which would alter this.  Can anyone help me figure this ou