How to use proxy settings to join a Remote Server ?

I have a problem to configure a Remote Server : my portal is behind a proxy, to access to the remote server, I have to make some proxy settings. I've tried to use -Dhttp.proxyHost and -Dhttp.proxyPort but they have no effect
It seems like that the portal ignore completely my proxy settings
Any idea to resolve this ?
Thanks

I've resolved it : proxy settings can be modified in <PT_HOME>/settings/common/serverconfig.xml
It was not easy to find it, there's no doc talking about this

Similar Messages

  • How to use proxy settings for one website

    Hello,
    I have to access the only one website using Proxy settings and for others I don't need proxy to access. Is there a way to configure the internet settings to allow one website using Proxy... Please advise. Thanks!
    Regards,
    Aravin S

    I am also getting this "error".  The printer (8500 A910) connected to the web well enough that it went out and supposedly downloaded a new update, but then it was supposed to print a page showing the email address, but did not.
    So I go in and try to set up the eprint, and it tells me it cannot connect to the sever and I'll need to enter a proxy address and port number.  But my ISP's cable modems do NOT have any static IP address nor do they provide any sort of proxy service.  Everything works just fine with "automatic discovery" (DHCP) for every computer in the house.  No problems there.
    So, since  that's the case, of course I cannot look up some proxy address and port number in my web browser because they're all set up for "automatically detect settings".
    What's baffling is that the printer connected to something at HP to download the "update", and it went through a process that appeared to be what I'd expect it to do if it was updating its firmware.  But it won't connect to whatever it's supposed to connect to to have an email address assigned.
    Does HP supply a proxy server?  If so, what's its IP address or URL, and what port should a person set the printer to try to use?
    UPDATE:
    It appears that the HP site must have just been "down" for about six or seven hours while I was trying to get the printer to connect because it now connected and I got an email address asigned without needing to have any "proxy" stuff set up at all.  It's a shame that the printer does not simply report "HP Site down - try again later" instead of reporting that you need to use a proxy when that's impossible.
    "Now, on to the next problem which is that my emails to the assigned address are all bouncing with a "550 5.7.1 Command rejected" error!

  • How to use Proxy Settings in swf?

    Hi ,
        I am using swf inside an MFC application. Both MFC applciation and swf can call web pages(some web services). Everything was working fine until my company added a proxy server. I have made changes to the MFC application and that can communicate through proxy server but swf is still not able to call remote services.
    Where should I make changes in swf to call remote service through proxy? I just want to know which class or property should I use? There should be some propety to specify that I want to make a request through Proxy server on some port with a username and password.
    - Rahul

    I've resolved it : proxy settings can be modified in <PT_HOME>/settings/common/serverconfig.xml
    It was not easy to find it, there's no doc talking about this

  • How to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0)

    Hi all,
    I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
    With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
    // I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
    // and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
    Class cls = javax.mail.internet.InternetAddress.class;
    java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
    java.security.CodeSource cSource = pDomain.getCodeSource();
    java.net.URL location = cSource.getLocation();
    System.out.println(location.toString());
    This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
    - I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
    - I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
    - I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
    This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
    Can you please help me ?
    Thanks in advance for your answers,
    Laurent

    I strongly suggest to upgrade to AS 10.1.3 to get this.
    Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
    --olaf                                                                                                                                                                                                                                                                                                               

  • How to disable proxy settings from ipad

    hi i am using airtel india  sim for acessing internet from ipad mini. but my memberships in some accounts has been suspended saying that due to proxy use. but i  did not use any proxy settings n i m using internet via airtel internet. in this regard, i wnt to remove the proxy settings from my device. can any one help me on advising where to find the proxy settings and how to disable them? plz...............

    Proxy settings on the iPad relate only to WiFi (Settings > WiFi). It's possible your mobile operator is using a Proxy. You should talk to them to see if that's the case.

  • How to make proxy settings in solaris 10 i386

    Dear Sir,
    I need your help in making proxy settings in solaris 10 x86, as well as on SPARC.
    i installed on virtual machine, and later i wanted to do the same on M4000 server. please help.
    Why I need to set proxy?
    I am on a co-orporate network, and it requires proxy to use internet to download packages for sun directly from sun machine.
    What package I want to download?
    I want to dowload CUPS to configure LINE PRINTER(ALIS5180).
    What did i do to configure line printer?
    1, i installed sun solaris 10 on a dell server to make it as a "print server"
    2, with the print manager I configure "alis5180"
    3, give the print command to test the printing.
    4, I did not got success, coz it is not printing the document i want, it is printing junk.
    5, i clear the cache of alis5180 printer.
    6, reset all the emulations ANSI, IBM Proprinter III XL, Epson FX-1180, Printronix® P600 & P 5000/6000, DEC® LG01, HP 2564C, Tally line/dot matrix printer, Epson FX 1180,
    MTPL, contextual arabic, Twinax (IBM 4234/4210/5225)/Coax(IBM4234), HP LineJet HPLP Series, HP 256X no success.
    Conclusion:-
    This is why I want to configure cups. and I need internet access on the print server to download the this package, and it require internet connection.
    Regards,
    Mky
    Edited by: user9007339 on Jan 22, 2012 3:29 AM

    You could try the Dell site, but I doublt if they will have a driver for Solaris, Linux maybe but not Solaris. Otherwise try the DriverGuide web site. http://www.driverguide.com/
    You could also try installing OpenSolaris if you don't specifically need Solaris 10. Better chance that OpenSolaris will support the NIC.

  • How to access proxy settings in terminal

    I want to use git in the terminal, but unfortunately I'm sometimes (but not always) behind a firewall that requires me to use a proxy server.
    I've successfully set up environments for all these locations, including the proxy settings that are relevant in each context, but I'm unable to access them in the terminal (i.e. there's no HTTP_PROXY environment variable). My idea is to 'inherit' the system wide proxy settings in the terminal and use them to configure git.
    Is there any way to access the proxy settings in the terminal.

    In you home directory, create a file called .bash_profile (notice the leading dot)
    nano .bash_profile
    add to that file
    export HTTP_PROXY="http://your.proxy.information:nnn"
    Save the file
    Restart the Terminal session.
    Command line Git should work via the environment variable you just created.
    NOTE: you will need to use
    ls -a
    to see the .bash_profile in a Terminal session, and because the leading dot makes it an invisible file, the Finder will not show it without some magic Finder Foo

  • When & how to use default settings option in job scheduling with BO 4.1

    Hi,
    With BO 4.1 we got new features and one of them is "Default Settings" option in the job scheduling. While scheduling a report in CMC we are getting below attached screen. I want to know when and how to use this option? while scheduling job on queries.
    Please guide me to, thanks in advance.
    Regards,
    Mithun Pati.

    Hi Mithun,
    Below thread may give you clear idea.
    The Purpose of the default settings is to have customized default settings for the enterprise. These settings would apply to any user who has access to Info view and wants to schedule a report. For example you can setup default values for "From" section of email so any scheduled reports use those settings. Similarly another setting we have defaulted is the number of retires involved and the seconds for each retry. Business Objects will not send out a failure emails unless the last retry has failed. The default settings should only be modified by an admin.
    Purpose of Default Settings when scheduling a WebI report?

  • How to use proxy for all application in XFCE?

    Hi all,
    Is there any way I can setup a proxy and then all applications over XFCE can use it, just like the Internet Option in Windows?
    I tried "export PROXY=..." in command line and setup proxy for Firefox, but those setting is not for overall system.
    If unfortunately there is no way for global setting, at least please tell me how to setup proxy for svn command.
    Thank you.

    Sign in with whatever Apple ID desired on the device in iMessage setup.
    This has no affect on the Apple ID used for store purchases or iCloud.

  • How to edit proxy settings of available WLAN????

    i OWN NOKIA C-3 AND FACING PROBLEM IN USING WIFI AT MY UNIVERSITY. IT SEARCHES AVAILABLE NETWORKS AND GETS CONNECTED BUT WHEN I TRY TO BROWSE THERE APPEARS AN ERROR THAT "SERVICE NOT AVAILABLE" ITS BECOZE THE PROXY SETTINGS IT PICKS UP AUTOMATICALLY ARE MAY B INCOMPLETE OR INCORRECT AND I DIDNT FOUND ANY OPTION TO EDIT ITS SETTINGS EPECIALLY PROXY SETTINGS. FEW OF MY FRIENDS ARE USING SOME OLDER MODELS OF NOKIA AND THEY HAVE EDITING OPTIONS OF PROXY ADDRESS ETC OF NETWORK WHICH YOU ARE CONNECTED WITH BUT IN MY C-3 I JUST CAN VIEW THE SETTINGS PICKED UP AUTOMATICALLY BUT CANT EDIT SETTINGS
    CAN ANY BODY HELP ME TO TACKLE THIS PROBLEM? 

    unfortunately i have to use 1.4 which makes this a bit more tricky.
    my other idea was to use system.setProperties to set the 2 proxy fields and then afterwards set them back to what they were -- however in the case they were null I get an NPE when I try and set them back, so I'd need a workaround for that as well.

  • Publish problem using proxy settings

    We use network proxy settings (for an Internet filter), and they are preventing me from being able to publish my iCal calendars. Has anyone had any success? I get an error message stating that the user name and/or password are wrong in the proxy settings, but they are correct in the network prefs. I haven't found anywhere in the iCal prefs to adjust proxy settings.

    You must configure the firewall on your iMac so that those ports are open.

  • Airport Express - How to set proxy settings?

    Hello all
    I have an AirPort Express in for testing at work.
    The internet access at work requires going through a proxy. This proxy gets set on domain clients via gpo.
    We have some devices we dont want to put on the domain (wont get the gpo) but we need them to have internet access.
    We could set the proxy on these devices manauly but theres a lot of them.
    I have been trying to find where in the Airports settings you can set proxy settings but cant find anything.
    Can you set proxy settings manualy in the device and if so, where abouts?
    I'm using windows for accessing the Airports settings.
    Thanks for any help someone can offer.

    unfortunately i have to use 1.4 which makes this a bit more tricky.
    my other idea was to use system.setProperties to set the 2 proxy fields and then afterwards set them back to what they were -- however in the case they were null I get an NPE when I try and set them back, so I'd need a workaround for that as well.

  • How to check proxy settings for android

    Hi...when i try to go to youtube in mozilla android, it won't go at all and gives me a message to check my proxy settings...I tried as I may ...could not find or know what proxy to change...see no network options like my "Windows computers"...which I have set for "no proxy" ...pity...I added a lot of cool features to firefox and can't go to youtube and some other sites too.*john

    Hey John,
    I am sorry to hear that on mobile the Firefox for Android is asking to check the proxy. Does this happen on multiple networks?
    If there is a proxy it should be listed in about:networking. Plug that into your url and see if there is a proxy listed.
    There is also a nifty add on [https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CCYQFjAB&url=https%3A%2F%2Faddons.mozilla.org%2Fen-US%2Fmobile%2Faddon%2Fproxy-mobile%2F&ei=0n5JVM_AJtCmyATo34KICg&usg=AFQjCNEiZyw3XPMF0dUWJN36Lv5rJnKtKg&bvm=bv.77880786,d.aWw Mobile Proxy] that might be able to list them.

  • How to change proxy settings on my firefox 4 beta for android

    I cannot see any proxy settings button in preferences section

    To set a proxy server in Firefox 4 beta for Android:
    # Type "about:config" in the address bar and press return.
    # Type "proxy.http" into the search box on the about:config page.
    # Tap on "network.proxy.http" and type the server name into the text box.
    # Tap on "network.proxy.http_port" and type the port number into the number box.

  • How do I copy a file to a remote server using runtime exec - plz Help!

    Hi,
    I am trying to copy a file to a remote server using a runtime exec command as follows:
    Runtime.getRuntime().exec("scp "+getProperty(ListNewHandsetDetailsConstant.PROP_OUTPUT_PATH_JAR)+getProperty(ListNewHandsetDetailsConstant.PROP_OUTPUT_JAR_NAME)+".jar "+" "+getProperty(ListNewHandsetDetailsConstant.PROP_OUTPUT_PATH_TWO_USERNAME)+"@"+getProperty(ListNewHandsetDetailsConstant.PROP_OUTPUT_PATH_TWO_URL)+":"+getProperty(ListNewHandsetDetailsConstant.PROP_OUTPUT_PATH_TWO_JAR));
    Problem is this statement does not execute, as when I try it directly on command line, it requests for a password. Any suggestions on how I can get rid of that? I think I might have to configure my ssh_config file, but when I did some "Googling", I found the configuration settings of a ssh2_config file. I tried those (changing it to Host-based Authentication), but it didn't recognise them. Please help, this is so urgent!
    Regards,
    Simz

    Don't use Runtime.exec (or ProcessBuilder) for this. Check out JSch at JCraft (or some other Java SSH API.

Maybe you are looking for