How to use puk-code

how to use puk-code to start

Sorry, same situation. If you want to use the iphone as an iPod, you'll have to have a supported SIM.
If you have, follow this article:
Using an iPhone without a wireless service plan - Apple Support

Similar Messages

How to use Java code inside WebDynpro-ABAP

Hi,
How to use Java code inside WebDynpro-ABAP.
Could any one provide sample code.
Cheers,
Sam

Hi Sam,
We can't Bring Java Inside the ABAP. Both are running in different Environments.
and also ABAP Codes are runs on BASIS.
-Basis is a middleware between ABAP codes and Ur OS.
-Contains set of programs to load,RUN,intepret the ABAP program..
So Both are Different.
Regards,
Ramganesan K.

How to use pramotional code in iStore?

Hi,
We have added promotional code. Its for 10% discount. But as we add code number still at item level discount is not calculated.
So if any setup is missing plz tell. We are using 11i.
Regards,
Ashish

Hello Ashish,
Confirm your setups are as per the example in:
How to use Promotion Codes in iStore Shopping Cart (Doc ID 156009.1)
Check qualifiers on this modifier -
Remove and re-add one by one to determine if any are problematic
Please check above items to isolate possible setup issues.
Regards,
Debbie

How to use content code to redeem mountain lion

when i had enter content code in redeem option its showing i have to make a payment method. tell me how to use content code to redeem mountain lion osx

Correction- you have to put the content code into the PDF file Apple sent you as the password to open the PDF then the redemption code is shown.

How To Use PMD Code Checker in Jdeveloper 9

Hai
Please Any one tell me How To Use PMD Code Checker in Jdeveloper 9
Thanks

Timo
You Checking file with PMD in **Jdeveloper** possible in jdev 10.1.3
for the earlier versions you told me to use command prompt
that's why when iam checking my file with pmd the output is like the below:
D:\jdev9\OAF\jdevbin\jdev\lib\ext\pmd-bin-4.2.5\pmd-4.2.5\java14\bin>pmd D:/satyas/Test.java xml rulesets/unusedcode.xml -debug
In JDK 1.5 mode
Loaded rule UnusedPrivateMethod
Loaded rule UnusedPrivateField
Loaded rule UnusedFormalParameter
Loaded rule UnusedLocalVariable
Processing D:\satyas\Test.java
Could not find class Test, due to: java.lang.ClassNotFoundException: Test
<?xml version="1.0" encoding="UTF-8"?>
<pmd version="4.2.5" timestamp="2010-08-24T19:02:07.019">
<file name="D:\satyas\Test.java">
<violation beginline="5" endline="5" begincolumn="22" endcolumn="22" rule="UnusedLocalVariable" ruleset="Unused Code Rules" class=
"Test" method="main" variable="i" externalInfoUrl="http://pmd.sourceforge.net/rules/unusedcode.html#UnusedLocalVariable" priority=
"3">
Avoid unused local variables such as 'i'.
</violation>
<violation beginline="14" endline="14" begincolumn="23" endcolumn="32" rule="UnusedPrivateMethod" ruleset="Unused Code Rules" clas
s="Test" method="myMethod" externalInfoUrl="http://pmd.sourceforge.net/rules/unusedcode.html#UnusedPrivateMethod" priority="3">
Avoid unused private methods such as 'myMethod()'.
</violation>
</file>
</pmd>

HT201328 I have iphone 4 with virgin mobile canada, virgin provided me SIM unlock code online, but i don't know how to use that code to unlock my phone. Can anyone help me in this?

I have iphone 4 with virgin mobile canada, virgin provided me SIM unlock code online, but i don't know how to use that code to unlock my phone. Can anyone help me in this?

That's not how unlocking an iPhone works.
The carrier the phone is locked to submits a request to Apple, wh updates their database. When that is complete, you restore the phone with iTunes to process the unlock.

How can use simpler code?

How can use simpler code for checking a particular value in a string?
FIND 'C' IN fg_result ."FOR PAYMENT METHODS "CPRS"
IF sy-subrc NE 0. FIND 'P' IN fg_result.ENDIF.
IF sy-subrc NE 0. FIND 'R' IN fg_result.ENDIF.
IF sy-subrc NE 0. FIND 'S' IN fg_result.ENDIF.
IF SY-SUBRC = 0.

Dear Shashank,
DATA: GV_SRCH(1)    TYPE   C.
CASE GV_SRCH.
WHEN 'C'.
                  FIND 'C' IN fg_result.
WHEN 'P'.
                  FIND 'P' IN fg_result
WHEN 'R'.
                  FIND 'R' IN fg_result
WHEN 'S'.
                  FIND 'S' IN fg_result
ENDCASE.
Regards,
Abir
Don't forget to award Points *

HT4061 how to find puk code to iPad

how to find puk code to iPad

It is located on the card that held your sim, if you do not have that, you need to contact your carrier.

How to use Source Code Control for Large Application?

Hi, All!
I would like to collect knowledge about "best practice" examples for using Source Code Control and project organization for relative large application (let's say approx 1000 SubVIs).
Tools used:
LabVIEW 8.0
CVS Server
PushOK CVS Proxy Client
WinCVS
With LabVIEW 8 we can organize large project pretty well. This described in article Managing Large Applications with the LabVIEW Project.
I have read this article too: Using Source Control Software with LabVIEW In this Article Source Safe used, but with PushOK all looks nearby the same and works (some tricks for compare function are required).
Example. Two developers working together on same project. Internally project is modular, so one developer will work with module "Analysis", and another one with "Configuration" without interferences. These modules placed into Subfolders as shown in example above.
Scenario 1:
Developer A started with modification of module "Analysis". Some files checked out. He would like to add some SubVIs here. So, he must also perform check out for the project file (*.lvproj), otherwise he cannot add anything into project structure.
Developer B at the same time would like to add some new functions into module "Configuration". He also needed to check out project file, but this file already checked out by Developer A (and locked). So, he must wait until lvproj file will be checked in. Another way is mark *.lvproj files as text files in PushOK, but then one of developers will get conflict message by checking in and then merging will be necessary. This situation will coming very often, because in most cases *.lvproj file will be checked out all the time.
Question: Which practice is better for such situation? Is Libraries better than folder for large project?
Scenario 2:
Developer C joined to the team. First, he must get complete project code for starting (or may be at least code of one Library, which assigned to him).
Question: How it can be done within LabVIEW IDE? Or WinCVS (or other SCC UI) should be used for initial checkout?
Scenario 3:
Developer D is responcible for Build. Developers A,B,C have added lot of files into modules "Analysis", Configuration" and "FileIO". For building he need to get complete code. If our project splitted into folders, he should get latest *.lvproj first, then newly added SubVIs will appear in Project Explorer, then he should expand tree, select all SubVIs and get latest versions for all. If Project organized in Libraries, he must do the same for each library, isn't?.
Question: Is this "normal way", or WinCVS should be used for this way? In WinCVS its possible with two mouseclicks, but I prefer to get all code from CVS within LabVIEW IDE recursively...
That was a long post... So, if you already working with LabVIEW 8 with SCC used for large project, please post your knowledge here about project structure (Folders or Libraries) and best practices, its may be helpful and useful for all of us. Any examples/use cases/links etc are appreciated.
Thank you,
Andrey

Regarding your scenarios:
1. Using your example, let's say both developers checked out version 3
of the project file. Assuming that there are only files under the
directories in the example project, when Developer A checks in his
version of the project, there will be new files in one section of the
project separate from where Developer B is working. Developer B,
notices that there is now a version 4 of the project. He needs to
resolve the changes so will need to merge his changes to the latest
version of project file. Since the project file is a text file, that is
easy to do. Where an issue arrises is that after Developer B checks in
his merged changes, there is a revision 5. When Developer A and B go to
make another change, they get the latest version which will have the
merged changes to the project file but not the referenced files from
both Developer A and B. So when A opens version 5, he sees that he is
missing the files that B checked in and visa versa. Here is where the
developers will needs to manually use the source control client and,
external to LabVIEW, get those new files.
Where libraries help with the above scenario is that the library is a
separate file from the project so changes made to it outside of the
project do not require the project to be modified. So this time, the
developers are using a single project again which time time references
two libraries. The developers check out the libraries, make changes to
the libraries, and then check those changes in. So when each developer
opens the project file, since it references the project file, the
changes to the library will be reflected. There is still the issue of
the new files not automatically coming down when the latest version of
the library is obtained. Again, the developers will needs to manually
use the source control client and, external to LabVIEW, get those new
files. In general, you should take advantage of the the modularity that
libraries provide.
2. As noted in the above scenario, there is no intrinsic mechanism to
get all files referenced by a LabVIEW project. Files that are missing
will be noted. The developer will then have to use the source control
provider's IDE to get the initial contents of the project (or library).
3. See above scenarios.
George M
National Instruments

How to use the code written in App.Xaml.cs in Windows Phone 8 in Windows Phone 8.1 Universal Apps

i have a App.xaml.cs file in Windows Phone 8.0 , amd i want to use the code in that file to make work with App.xaml.cs file in Windows Phone 8.1 Universal Apps
My Windows Phone 8 App.xaml.cs file is like as below
namespace OnlineVideos
public partial class App : Application
#region Initialization
public static dynamic group = default(dynamic);
public static dynamic grouptelugu = default(dynamic);
public static ShowList webinfo = default(ShowList);
public static WebInformation webinfotable = new WebInformation();
AppInitialize objCustomSetting;
IsolatedStorageSettings settings = IsolatedStorageSettings.ApplicationSettings;
DispatcherTimer timer;
IsolatedStorageFile isoStore = IsolatedStorageFile.GetUserStoreForApplication();
public static bool AdStatus = false;
public App()
UnhandledException += Application_UnhandledException;
if (System.Diagnostics.Debugger.IsAttached)
Application.Current.Host.Settings.EnableFrameRateCounter = true;
//RootFrame.UriMapper = Resources["UriMapper"] as UriMapper;
AppSettings.NavigationID = false;
objCustomSetting = new AppInitialize();
timer = new DispatcherTimer();
Constants.DownloadTimer = timer;
InitializeComponent();
InitializePhoneApplication();
#endregion
#region "Private Methods"
void StartDownloadingShows()
timer.Interval = TimeSpan.FromSeconds(10);
timer.Tick += new EventHandler(timer_Tick);
timer.Start();
void timer_Tick(object sender, EventArgs e)
try
BackgroundWorker worker = new BackgroundWorker();
worker.DoWork += new DoWorkEventHandler(StartBackgroundDownload);
worker.RunWorkerCompleted += new RunWorkerCompletedEventHandler(worker_RunWorkerCompleted);
worker.RunWorkerAsync();
catch (Exception)
void worker_RunWorkerCompleted(object sender, RunWorkerCompletedEventArgs e)
if (AppSettings.StopTimer == "True")
timer.Stop();
AppSettings.StopTimer = "False";
async void StartBackgroundDownload(object sender, DoWorkEventArgs e)
switch (AppSettings.BackgroundAgentStatus)
case SyncAgentStatus.DownloadFavourites:
if (AppSettings.DownloadFavCompleted == false && AppSettings.SkyDriveLogin == true)
Deployment.Current.Dispatcher.BeginInvoke(() =>
timer.Stop();
ReStoreFavourites reStoreFav = new ReStoreFavourites();
await reStoreFav.RestorefavFolder(ResourceHelper.ProjectName);
Deployment.Current.Dispatcher.BeginInvoke(() =>
AppSettings.BackgroundAgentStatus = SyncAgentStatus.UploadFavourites;
timer.Start();
else
AppSettings.BackgroundAgentStatus = SyncAgentStatus.UploadFavourites;
break;
case SyncAgentStatus.UploadFavourites:
bool result = Task.Run(async () => await Storage.FavouriteFileExists("Favourites.xml")).Result;
if (AppSettings.SkyDriveLogin == true && result)
Deployment.Current.Dispatcher.BeginInvoke(() =>
timer.Stop();
UploadFavourites upLoad = new UploadFavourites();
await upLoad.CreateFolderForFav(ResourceHelper.ProjectName);
Deployment.Current.Dispatcher.BeginInvoke(() =>
AppSettings.BackgroundAgentStatus = SyncAgentStatus.DownloadParentalControlPreferences;
timer.Start();
else
AppSettings.BackgroundAgentStatus = SyncAgentStatus.DownloadParentalControlPreferences;
break;
case SyncAgentStatus.RestoreStory:
if (AppSettings.DownloadStoryCompleted == false && AppSettings.SkyDriveLogin == true && (ResourceHelper.ProjectName == "Story Time" || ResourceHelper.ProjectName == "Vedic Library"))
Deployment.Current.Dispatcher.BeginInvoke(() =>
timer.Stop();
RestoreStory restore = new RestoreStory();
//if (ResourceHelper.ProjectName == "Story Time")
await restore.RestoreFolder("StoryRecordings");
//else
// await restore.RestoreFolder("VedicRecordings");
Deployment.Current.Dispatcher.BeginInvoke(() =>
AppSettings.BackgroundAgentStatus = SyncAgentStatus.UploadStory;
timer.Start();
else
AppSettings.BackgroundAgentStatus = SyncAgentStatus.UploadStory;
break;
case SyncAgentStatus.UploadStory:
if (AppSettings.SkyDriveLogin == true && (ResourceHelper.ProjectName == "Story Time" || ResourceHelper.ProjectName == "Vedic Library"))
Deployment.Current.Dispatcher.BeginInvoke(() =>
timer.Stop();
UploadStory st = new UploadStory();
//if (ResourceHelper.ProjectName == "Story Time")
await st.CreateFolder("StoryRecordings");
//else
// await st.CreateFolder("VedicRecordings");
Deployment.Current.Dispatcher.BeginInvoke(() =>
AppSettings.BackgroundAgentStatus = SyncAgentStatus.DownloadFavourites;
timer.Start();
else
AppSettings.BackgroundAgentStatus = SyncAgentStatus.DownloadFavourites;
break;
default:
ShowDownloader.StartBackgroundDownload(timer);
break;
#endregion
#region "Application Events"
private void pop_Opened_1(object sender, EventArgs e)
DispatcherTimer timer1 = new DispatcherTimer();
timer1.Interval = TimeSpan.FromSeconds(5);
timer1.Tick += timer1_Tick;
timer1.Start();
void timer1_Tick(object sender, EventArgs e)
(sender as DispatcherTimer).Stop();
Border frameBorder = (Border)VisualTreeHelper.GetChild(Application.Current.RootVisual, 0);
Popup Adc = frameBorder.FindName("pop") as Popup;
Adc.IsOpen = false;
private void Application_Launching(object sender, LaunchingEventArgs e)
SQLite.SQLiteAsyncConnection conn = new SQLite.SQLiteAsyncConnection(Constants.DataBaseConnectionstringForSqlite);
Constants.connection = conn;
AppSettings.AppStatus = ApplicationStatus.Launching;
AppSettings.StopTimer = "False";
objCustomSetting.CheckElementSection();
SyncButton.Login();
if (AppSettings.IsNewVersion == true)
AppSettings.RatingUserName = AppResources.RatingUserName;
AppSettings.RatingPassword = AppResources.RatingPassword;
AppSettings.ShowsRatingBlogUrl = AppResources.ShowsRatingBlogUrl;
if (ResourceHelper.AppName == Apps.Online_Education.ToString() || ResourceHelper.AppName == Apps.DrivingTest.ToString())
AppSettings.QuizRatingBlogUrl = AppResources.QuizRatingBlogUrl;
AppSettings.LinksRatingBlogUrl = AppResources.LinksRatingBlogUrl;
AppSettings.ShowsRatingBlogName = AppResources.ShowsRatingBlogName;
AppSettings.LinksRatingBlogName = AppResources.LinksRatingBlogName;
if (ResourceHelper.AppName == Apps.Online_Education.ToString() || ResourceHelper.AppName == Apps.DrivingTest.ToString())
AppSettings.QuizLinksRatingBlogName = AppResources.QuizLinksRatingBlogName;
Constants.UIThread = true;
group=OnlineShow.GetTopRatedShows().Items;
grouptelugu = OnlineShow.GetRecentlyAddedShows().Items;
Constants.UIThread = false;
StartDownloadingShows();
private void Application_Activated(object sender, ActivatedEventArgs e)
AppSettings.AppStatus = ApplicationStatus.Active;
if (ResourceHelper.AppName == Apps.Kids_TV_Pro.ToString())
AppSettings.ShowAdControl = false;
private void Application_Deactivated(object sender, DeactivatedEventArgs e)
AppSettings.AppStatus = ApplicationStatus.Deactive;
AppState.RingtoneStatus = "TombStoned";
private void Application_Closing(object sender, ClosingEventArgs e)
AppSettings.AppStatus = ApplicationStatus.Closing;
private void Application_UnhandledException(object sender, ApplicationUnhandledExceptionEventArgs e)
FlurryWP8SDK.Api.LogError("Error at Application_UnhandledException in App.xaml.cs", e.ExceptionObject.InnerException);
if (System.Diagnostics.Debugger.IsAttached)
System.Diagnostics.Debugger.Break();
else
Exceptions.SaveOrSendExceptions("Exception in Application_UnhandledException Method In App.xaml.cs file.", e.ExceptionObject);
e.Handled = true;
return;
#endregion
#region Phone application initialization
public PhoneApplicationFrame RootFrame { get; private set; }
// Avoid double-initialization
private bool phoneApplicationInitialized = false;
// Do not add any additional code to this method
private void InitializePhoneApplication()
if (phoneApplicationInitialized)
return;
// Create the frame but don't set it as RootVisual yet; this allows the splash
// screen to remain active until the application is ready to render.
RootFrame = new PhoneApplicationFrame();
if (App.Current.Resources["AdVisible"] as string == "True")
RootFrame.Style = App.Current.Resources["RootFrameStyle"] as Style;
RootFrame.ApplyTemplate();
RootFrame.Navigated += CompleteInitializePhoneApplication;
// Handle navigation failures
RootFrame.NavigationFailed += RootFrame_NavigationFailed;
// Ensure we don't initialize again
phoneApplicationInitialized = true;
//NonLinearNavigationService.Instance.Initialize(RootFrame);
private void RootFrame_NavigationFailed(object sender, NavigationFailedEventArgs e)
if (System.Diagnostics.Debugger.IsAttached)
System.Diagnostics.Debugger.Break();
else
Exceptions.SaveOrSendExceptions("Exception in RootFrame_NavigationFailed Method In App.xaml.cs file.", e.Exception);
e.Handled = true;
return;
// Do not add any additional code to this method
private void CompleteInitializePhoneApplication(object sender, NavigationEventArgs e)
// Set the root visual to allow the application to render
if (RootVisual != RootFrame)
RootVisual = RootFrame;
// Remove this handler since it is no longer needed
RootFrame.Navigated -= CompleteInitializePhoneApplication;
#endregion
Mohan Rajesh Komatlapalli

Basically you are asking as how to port silverlight to Xaml (RT). Go one by one converting each API from silverlight to XAML, like IsolatedStorage isn't there in RT, so look for its alternative etc.
See here the namespace/class mappings : Windows Phone Silverlight to Windows Runtime namespace and class mappings
http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8

How to use html codes in epub files?

In Ipad ibook application can i use html codes in that books..
Most of the html codes are working except the text box. any one can help me to fix this ?

application-param tag in weblogic-application.xml may be used to define parameters:
webapp.encoding.default
webapp.encoding.usevmdefault
webapp.getrealpath.accept_context_path
http://e-docs.bea.com/wls/docs81/programming/app_xml.html#1034632
"Harshad Nanal" <[email protected]> wrote:
>
When we build an ear file , Weblogic-application.xml provides application-param
tag?
are they similar to env-entry in ejb-jar.xml.
Can I use application-param tag to define a configurable params
say myName and value as "Harshad"
How do i read it in the application say a simple java class that is included
in
a jar inside the ear file.

How to use t-code: OS41?

Hi,
I'd like to create BOM using batch input via t-code: OS41?
then, which settings/custmizing shoud be maintained? and how to use?
Thanks.

Hi Ren,
Please chcek this links perhaps it may help.
http://help.sap.com/saphelp_erp2005/helpdata/en/81/bab375a2b911d194a400a0c92f024a/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/81/bab366a2b911d194a400a0c92f024a/frameset.htm
Regards,
Ferry Lianto

How to use the code to update to mountain lion?

hi
How can you use the code tu free update to Mountain Lion? thks

Basically you are asking as how to port silverlight to Xaml (RT). Go one by one converting each API from silverlight to XAML, like IsolatedStorage isn't there in RT, so look for its alternative etc.
See here the namespace/class mappings : Windows Phone Silverlight to Windows Runtime namespace and class mappings
http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8

How to use Bar code field in Item master

Hi Experts
I want to know that How to integrate Bar code scanner data with SBO. Bar code contain many information like price, serial no., description etc . For example I want that when I read a barcode by barcode scanner it automatically update itemcode, description , price and serial no.
Thanks
regards
Gorge

Hello Gorge,
A barcode would ideally contain only an identification code and not other information. All such information like price, etc. should be fetched from a database, after reading the barcode, and identifying the item.
You can simply enter the barcode in the Item Master Data and than use the barcode field to identify the item in sales / purchase documents instead of itemcode or itemname.
Rahul

How to use the code posted in the thread

Quick question. How do i use the code posted in the threads, because when I copy and past in the program it is not formatted well.
Per example : In the below link there is some code which i want to use, but when i copy and paste in the ABAP editor i get lot of syntax errors.
Re: BDC
Thanks.

Shiva,
I dont think you can do much about this because the code which you mentioned in that thread should have been kept using markup
Thanks
Bala Duvvuri
Edited by: Bala Duvvuri on Jul 15, 2010 7:29 PM

How to use puk-code

Similar Messages

Maybe you are looking for