How to use reading list

After saving to reading list, where do i find the list in the iphone?

Just posted the same question for iPad. Hope I get more responses than u.

Similar Messages

How to use dynamic list box in survey builder?

Hello,
Could someone give me a little bit of thread? How to use dynamic list box in survey builder?

Hi Liu,
Dynamic combo boxes::A combo box is dynamic if it references a document property for which a value set is defined in the configuration (System Administration ® System Configuration ® Content Management ® Global Services ® Property Metadata ® Properties ® Parameter Allowed Values).
At runtime (when you open the creation form) the system reads these values from the configuration and displays them in the dropdown list.
If you link a combo box for which list entries already exist to a document property with a value set, the system asks whether you want to delete the list entries. it is recommend that you accept this suggestion and delete the list entries from the XML Forms Builder. Otherwise inconsistencies could arise between the entries in the XML Forms Builder and the value set in the configuration. This can cause errors when saving.
Also you may Refer the Link for Further help:
http://help.sap.com/saphelp_crm50/helpdata/en/29/c40d3d2a83752de10000000a114084/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/00/9e7f41969e1809e10000000a155106/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/a7/5a874174a8050de10000000a1550b0/frameset.htm
Hope it Answers your Queries..
Thanks and Regards,
RK.

I need to learn how to use jump lists.

'''bold text'''I need to learn how to use jump lists. acording to all that I have muddled thru my ereader will only download books I have purchased and free ones if I use a jump list. I don't know how. If this is the correct method for ereaders downloads someone please explain it, simply to me. I have a reader I am totally unable to use. I have read the manual many times. That info doesn't work.

How is that related to Firefox support?

How to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.

how to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.

Hi bluegrandpanash,
Thanks for visiting Apple Support Communities.
If you backed up your iPhone to iCloud before updating the software, first try the steps under "Restore from an iCloud backup" in this article to recover your data:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Best Regards,
Jeremy

How to delete reading list in ios 7

Please i want to know how to delete reading list in ios7

I Have been trying to work this one out for ages. Many thanks. Simple when you know how .

How to use intractive list in Alv REPORT

how to use intractive list in Alv REPORT with example.
thangs
venki.......

Hi
using the USER_COMMAND we can move to the Secondary(interactive) list in the ALV
see the sample code
report yh645_secndry_alv.
type-pools: slis.
data: fieldcat type slis_t_fieldcat_alv,
fieldcat_ln like line of fieldcat,
fs_layout type slis_layout_alv,
t_layoout like standard table
of fs_layout.
data: begin of fs_spfli,
carrid type spfli-carrid,
connid type spfli-connid,
countryfr type spfli-countryfr,
cityfrom type spfli-cityfrom,
airpfrom type spfli-airpfrom,
countryto type spfli-countryto,
cityto type spfli-cityto,
airpto type spfli-airpto,
fltime type spfli-fltime,
deptime type spfli-deptime,
arrtime type spfli-arrtime,
distance type spfli-distance,
distid type spfli-distid,
fltype type spfli-fltype,
period type spfli-period,
checkbox,
color(3),
end of fs_spfli.
data:
begin of fs_table,
carrid type spfli-carrid,
connid type spfli-connid,
end of fs_table.
data: begin of fs_sflight,
check,
color(3).
include type sflight.
data:end of fs_sflight.
data:
begin of fs_table1,
carrid type sflight-carrid,
connid type sflight-connid,
fldate type sflight-fldate,
end of fs_table1.
data:
t_spfli like standard table
of fs_spfli.
data:
t_table like standard table
of fs_table.
data:
t_table1 like standard table
of fs_table1.
data:
t_sflight like standard table
of fs_sflight.
data:
t_sbook like standard table
of sbook.
data t_layout type slis_layout_alv.
select *
into corresponding fields of table t_spfli
from spfli.
perform start_list_viewer.
perform get_spfli_details.
*& Form SUB1
text
-->RT_EXTAB text
form sub1 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SFLIGHT'.
append flight to rt_extab.
set pf-status 'SFLIGHT'. " EXCLUDING RT_EXTAB.
endform. "SUB1
*& Form START_LIST_VIEWER
text
--> p1 text
<-- p2 text
form start_list_viewer .
data: pgm like sy-repid.
pgm = sy-repid.
fs_layout-box_fieldname = 'CHECKBOX'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB1'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SPFLI'
is_layout = fs_layout
tables
t_outtab = t_spfli
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " START_LIST_VIEWER
*******Process Call Back Events (Begin)**************************
form user_command using ucomm like sy-ucomm
selfield type slis_selfield.
case ucomm.
when 'SFLIGHT'.
selfield-refresh = 'X'.
perform get_spfli_details.
select *
from sflight
into corresponding fields of table t_sflight
for all entries in t_table
where carrid eq t_table-carrid
and connid eq t_table-connid.
perform display_sflight.
when 'SBOOK'.
selfield-refresh = 'X'.
perform get_sflight_details.
select *
from sbook
into corresponding fields of table t_sbook
for all entries in t_table1
where carrid eq t_table1-carrid
and connid eq t_table1-connid
and fldate eq t_table1-fldate.
perform display_sbook.
endcase.
endform. "USER_COMMAND
*& Form SUB2
text
-->RT_EXTAB text
form sub2 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SBOOK'.
append flight to rt_extab.
set pf-status 'SBOOK'. " EXCLUDING RT_EXTAB.
endform. "SUB2
*& Form DISPLAY_SFLIGHT
text
--> p1 text
<-- p2 text
form display_sflight .
data: pgm like sy-repid.
pgm = sy-repid.
clear t_layout.
fs_layout-box_fieldname = 'CHECK'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB2'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SFLIGHT'
is_layout = fs_layout
tables
t_outtab = t_sflight
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SFLIGHT
*& Form GET_SPFLI_DETAILS
text
--> p1 text
<-- p2 text
form get_spfli_details .
loop at t_spfli into fs_spfli.
if fs_spfli-checkbox = 'X'.
fs_spfli-color = 'C51'.
fs_spfli-checkbox = '1'.
fs_table-carrid = fs_spfli-carrid.
fs_table-connid = fs_spfli-connid.
append fs_table to t_table.
modify t_spfli from fs_spfli.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form GET_SFLIGHT_DETAILS
text
--> p1 text
<-- p2 text
form get_sflight_details .
loop at t_sflight into fs_sflight.
if fs_sflight-check = 'X'.
fs_sflight-color = 'C71'.
fs_sflight-check = '1'.
fs_table1-carrid = fs_sflight-carrid.
fs_table1-connid = fs_sflight-connid.
fs_table1-fldate = fs_sflight-fldate.
append fs_table1 to t_table1.
modify t_sflight from fs_sflight.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form DISPLAY_SBOOK
text
--> p1 text
<-- p2 text
form display_sbook .
data: pgm like sy-repid.
pgm = sy-repid.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_structure_name = 'SBOOK'
tables
t_outtab = t_sbook
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SBOOK
Reward points for useful Answers
Regards
Anji

How to alphabetize reading list. Is there a way to change the order of the reading list?

how to alphabetize reading list. Is there a way to change the order of the reading list?

At present there is no way to alphabetize Reading List.
Best.

Safari stops responding arter using reading list.

I had a problem with my computer today. My iMac 2012 haven't been launching. After desctop shows of earlier everything have been shuting down and I could see the screen like Kernel Panic, but with the message "there was a problem...press a key or wait", smt like this. then everything repeats and it was a completed circle. I fixed it by restore the rights of access in Recovery HD (arter screen is on, press Option, choose Recovery HD, Launch Disc Utility, etc.).
I know that in every strange situation keep calm and restore the rights of access.
But now my problem is smaller that the previous one. Wnen I try to open any page from Reading List, Safari stops responding to any of my actions and the only way to fix it is shut Safari down from System Monitoring or Dock.
How can I fix it?
P.S. Apple, my first problem is a very big stone to your garden. I know what to do in this kind of problems, but the others don't. I live in Russia (so sorry about my bad English) and I don't have Apple Stores where I can get professional support.
I wish you fixed it in new Mavericks update.

I don't know what it was, but now evertything is OK, I can again use the Reading List without any problems.
Still waiting for the Mavericks update.

How to sync reading lists from my Safari on Macbook with the iPhone Safari?

How can I sync my reading lists on the Safari on my Macbook Pro to the Safari on my iPhone?
Do I need to use iCloud?

Howdy Anna,
Indeed, iCloud can keep your Bookmarks, Reading List, and currently open tabs available across devices.
Bookmarks, Reading List, and iCloud Tabs
iCloud keeps your bookmarks and Reading List up to date in Safari on all your devices. It also updates iCloud Tabs to show you all the webpages you have open in Safari on your Mac computers with OS X v10.8 or later and your iOS devices with iOS 6 or later.
OS X Mavericks: Keep content current on all your devices with iCloud
https://support.apple.com/kb/PH14354
Sincerely,
Allen

How to use/read a property in a WSDL file?

Hello list,
Does anybody know how to use a property (e.g. myapp.host.name) in a WSDL file to dynamically switch between a certain host through the use of a property file?
My property file would look like this:
myapp.host.name=<some-ip-address-or-dns>
myapp.host.port=1234
I would save this property file as myapp.properties.
In a WSDL file that I receive from a 3rd-party I want to remove the hardcoded hostname and replace it with my property. For instance, something like this:
<port binding="tns:DoSomething" name="DoSomething">
<soap address location="http://abcdks02:1234/avb_xsd/start.edw?MySource=WebService></soap:address>
</port>{code}
should be replaced by this:
{code}<port binding="tns:DoSomething" name="DoSomething">
<soap address location="http://${myapp.host.name}:${myapp.host.port}/avb_xsd/start.edw?MySource=WebService></soap:address>
</port>Is there a fast, efficient and clean way to do this? I do not want to use maven2 filtering, because that forces a new re-deployment every time you change the value of the property. I also want to avoid Spring, because we're trying to get rid of Spring in our project.
What else can I use? I am sure there is a fast and efficient way to do this.
Any help is appreciated!
Thanks,
Gian

Hi biblio,
I have used the method you have mentioned to change the target end point. And that was successful. Thank you. Apart from this I have another issue. I want my web service read some database related values from properties file only when the web service is deployed. Currently the java application read the database related values in a static block. I have made this java application to a web service. I am new to java and thought of there may be something like ServletContextListener where I can read properties file. This allows me to read properties file only when the web application is deployed.

Using Reading List service with Twitter rather than Read It Later?

Hello, when using twitter, there is the option to 'save' links to services such as 'Read It Later/Instapaper'. However, I don't see how to do the same but using Apple's own Reading List service. Seeing the Twitter is integrated into iOS I am a little surprised by this. Am I missing something here?
Thxs,

Hi,
Is function mike_get_dir_list in your app parsing schema?
If not, you should grant execute privilege to function on your app parsing schema and
1. create synonym to app parsing schema
or
2. use schema qualifier in query
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

TS4001 How to delete reading list in the book mark and history

How to delete in bookmark and reading list in safari in Ipad and iphone4

Swipe across an item in the reading list and it should get a Delete button on it - you will need to do each individually, I don't think that there is a multi-select-and-delete option

How to delete reading list from safari

How do I delete the reading list entries on my iMac-Safari 8 and Yosemite being used

Click the sidebar icon in toolbar to open the sidebar.
Click the reading glass icon to select Reading List.
Move the mouse pointer to the top right of the reading list ite.
An "X" should appear.
Click it to delete the item.

How to use Reader in non-interactive persistent mode to convert PDFs?

How to use Adobe Acrobat Reader in non-interactive and persistent mode to convert PDFs to PostScript (or even better, bitmapped image files) ?
At present, I'm using
acroread -toPostScript indir/*pdf outdir/
to convert a set of PDFs to PostScript (the platform is Solaris on Sparc).
These PDFs arrive at varying rates at arbitrary intervals and I'd like to avoid the overhead of startup of the acroread process and loading of the fonts etc. I would like the acroread process to become persistent and that it should convert the PDFs either as and when they become available or on demand (ie upon receipt of some signal or message).
In the words, the usage is similar to that used by web browsers, which is effectively a client of the rendering service provided by the Adobe Acrobat Reader running in the background.
The only difference is that I need the output in a file (or set of files), either bitmap or PostScript.
Any help / pointers on how to do this would be greatly appreciated.
Thanks and best regards.

Hello,
As I understand, you would like to setup a watch folder which will be getting pdf files in arbitrary intervals. You then want each pdf to be converted to ps in a separate folder.
You could achieve this with the help of a script by polling for pdf files present in the watch folder. When you find pdf files, convert them to ps, save the ps file in another folder and then move the pdf to another folder.
In any case, once the process of conversion of pdf to ps is over, acroread will quit.
There is no way to keep the acroread process running in background and convert pdfs as and when they are available.
Please let me know if this answers your query.
Regards,
Rishi

How to use read() method in JEditorPane

Hai,
I not quite understand how to use the "read(InputStream in, Object desc)" method in JEditorPane, especially the "Object desc" argument. What should I put there? Can anyone give me an examples?
Thank you and sorry for the trouble.

The second parameter could be an HTMLDocument. If you
just pass null, then it takes the default as Text
document.
Cheers~ Thank idreesmd :)

How to use reading list

Similar Messages

Maybe you are looking for