How to use recovery partition for installing OS

hello,
i tried a lot to recover my os with lenove own button for system restore but it did't work and finaly i install OS XP Professional and manualy install all drivers. i must wanna say to lenove mangment that their this way is absolut more complicated then simply provide lenove customer backup cd with laptop. even when i call lenove help line for backup system cd then they demanded money for the cd eigther it must b free for lenove customer as lenove system restore button and partition whole typoligy seems to be total failur. If some one here plz give me advise what should i do with that partition of my hard drive which having system backup from lenove. i make 3 partition of my hdd with i did't remove that partition... so now i want to know that can i still use that partition for system restore or i should remove that partition to make my hdd space free
Thanx 4 reading
Mehr

I had the same problem. I hate Lenovo. I will not buy an another lenovo in my lifetime again. I paid for the OS, then when i call customer care, they ask me for money. Guys look at Dell. I had the system for 7 yrs, i had the OS that i purchased with my laptop. I am loving Dell. Lenovo , your process is wrong.

Similar Messages

How to use RAW partition for Oracle for placing data?

Dear all,
I have installed Oracle on a SUN machine and use database mount point /oracle which is a UFS system.
But now I would like to use RAW partition instead of a UFS system to place Oracle database data...
The installation guide mentions that database mount points have to be prepared before installation, could I just use /dev/rdsk/c0t0d0s5 as database mount points after partitioning c0t0d0s5?
I am attempting to create a tablespace in the above partition... Could any experts tell me if the above works?
Thanks a lot!

kwan,
Raw partion is used to store Oracle data files and not Oracle software. Oracle home is going be in regular file system. More than one file can not share the same raw device.
You create the raw device at the OS level using the OS command. Then create tablespace on Oracle and use the clause DATAFILE 'Raw file Name'
Hope this helps
Best,
G

How to use Recovery DVD to install new copy of OS and CUSTOM PARTITIONS?

Hi
I have problem with start appropriate recovery function from created Thoshiba Recovery DVD.
I burn two DVD using Toshiba Media Recovery Creator witch was preinstalled on my computer. Now I want to use it to install new copy of Windows 7 OS on my laptop. BUT I would not want to clear entire HDD. I want to format only C: partition, and leave data on my D: partition. Also I want to define C: partition size.
When I insert DVD and boot form it, some app start but display info that all partition will be removed. I can not choose another option.
How can I do it?

Hello
Check please http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm document.
I think everything must be explained there. If you have more questions please let us know.

Toshiba L50-A Cannot use recovery partition.

Hello i have l50-A series satelite laptop.
I had windows 8.
Recently i installed windows 8.1 from dvd. (oem), and just in case, i did not touch recovery partition to use it later.
Right now i want to use recovery partition for the factory reset, but i cannot reach recovery partition.
I tried pressing 0,
I tried using boot menu,
I tried windows 8.1 recovery options... nothing works.
(also right now it seems to be multiple recovery partitions..)
I'm pretty sure factory recovery partition is healty and still stood. (seen as 10gb partition)
ps: "Kurtarma Bölümü" = Recovery Partition.
Attachments:
picture.JPG ‏59 KB

Toshiba uses the number 0 or f12 to reach the recovery on start up. Press the shift key when shutting down then press the number 0 or the f12 on start up, you may have to press the fn key and the 0 or f12.
Some have posted that after going to Windows 8.1 it breaks the Windows 8 recovery option so they had to use Windows 8 recovery media.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Use another partition for Home directory?

I upgraded my Power Mac G5 to Leopard and it recognized that I use a separate partition for my home directory. My MacBook didn't have enough space on my system partition to upgrade, so I did a clean install. Now I'm stuck using a home directory on the system partition- NetInfo manager does not exist in Leopard to allow this change and I want to use another partition for my home directory. How do I change this?

Use the 'ln -s' command in the Terminal, which is in the /Applications/Utilities/ folder, to create a symbolic link to the desired location of your home folder, and put it where your current home folder is. The l in the command is a lowercase L; to see instructions for it, run 'man ls'.
(25389)

How to use Oracle partitioning with JPA @OneToOne reference?

Hi!
A little bit late in the project we have realized that we need to use Oracle partitioning both for performance and admin of the data. (Partitioning by range (month) and after a year we will move the oldest month of data to an archive db)
We have an object model with an main/root entity "Trans" with @OneToMany and @OneToOne relationships.
How do we use Oracle partitioning on the @OneToOne relationships?
(We'd rather not change the model as we already have millions of rows in the db.)
On the main entity "Trans" we use: partition by range (month) on a date column.
And on all @OneToMany we use: partition by reference (as they have a primary-foreign key relationship).
But for the @OneToOne key for the referenced object, the key is placed in the main/source object as the example below:
@Entity
public class Employee {
@Id
@Column(name="EMP_ID")
private long id;
@OneToOne(fetch=FetchType.LAZY)
@JoinColumn(name="ADDRESS_ID")
private Address address;
EMPLOYEE (table)
EMP_ID FIRSTNAME LASTNAME SALARY ADDRESS_ID
1 Bob Way 50000 6
2 Sarah Smith 60000 7
ADDRESS (table)
ADDRESS_ID STREET CITY PROVINCE COUNTRY P_CODE
6 17 Bank St Ottawa ON Canada K2H7Z5
7 22 Main St Toronto ON Canada L5H2D5
From the Oracle documentation: "Reference partitioning allows the partitioning of two tables related to one another by referential constraints. The partitioning key is resolved through an existing parent-child relationship, enforced by enabled and active primary key and foreign key constraints."
How can we use "partition by reference" on @OneToOne relationsships or are there other solutions?
Thanks for any advice.
/Mats

Crospost! How to use Oracle partitioning with JPA @OneToOne reference?

How to create recovery partition in new(changed) HDD.

my new HP pavilion g4 laptop HDD have crased, then I replce it by HP care. I upload original win 7 by recovery disk(DVD) but when I open my computer it shows only one partition (C drive, there is no recovery partition and HP tool.
So how to creates recovery partition by recovery disk(DVD)...........please help me.

Creating the recovery partition
Right-click the start orb, and start 'Disk Management'.
Shrink the C: drive by let's say 20-30GB.
Then create a new Partition and assign the R: label to it and name it RECOVERY.
Then open command prompt as administrator and type: 'recimg /createimage <directory>',
In this case: 'recimg /createimage R:\' to save it on the new partition.
This step may consume a lot of time.
Now we need to register the newly created recovery image: 'recimg /setcurrent <directory>'
'recimg /setcurrent R:\'
Voila you are done.
Restoring from recovery partition
You may want to use this restoring method by default, because it is the easiest way to do so if your recovery partition is still intact. If not, look at the other recovery methods to see which suits you best. This is usually the way you reset or refresh your Windows installation if you purchase a computer from a brand like Lenovo instead of building one yourself
Press the Windows-key + C to open the charms bar or swipe in from the right.
Click Settings.
Click Change PC Settings.
Click Update & Recovery in the menu on the left.
Click Recovery.
If all your documents are safe and sound in your user folder, you can use Refresh your PC without affecting files. However I still recommend taking a back-up... If you want to do a complete reinstallation of Windows and also clean your user folder in the process then choose Remove everything and reinstall Windows.

I lost my recovery partition for hp dv6 63300ee, with windows 7 home,, what can i do to back it?

i lost my recovery partition for hp dv6 63300ee, with windows 7 home,, what can i do to back it?

Hi,
This assumes that Windows 7 was the original OS that your notebook came with.
If you created a set of Recovery Discs you can use these to reinstall the original OS - they will also re-create the Recovery Partition on the Hard Drive as well as reinstalling all your original software. Remember this is a destructive process, so back up any personal files etc that you wish to keep before reinstalling the Operating System.
If you don't have your original Recovery Discs, you can order a replacement set using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to use Web Serivce for not jsr 172 phone

Hi:
Is anyone know, how to use web service for phones that only have standard J2ME package installed (without jsr 172 web service packagenstalled)?
thank you

Hi,
I think you need to write the code for this from scratch (built on top of existing HTTP functionality). There may be open-source J2ME code you could use. I've never tried this so I'm afraid I don't know any more. But maybe that is what you were asking... i.e. does anyone have code that does this already...
Tx,
Sam

How to use java api for function activity in embed oracle workflow?

because i can't install standalone oracle workflow successfully.
pls tell me how to use java api for function activity in embed oracle workflow?
are there some patch or pulg-in package?
ths a lot...........

The Java Function Activity Agent is not certified for Oracle Workflow embedded in Oracle Applications. Installing standalone workflow should be a lot easier than what you have found, although it looks like you did hit a Pentium 4 issue with the Oracle Universal Installer. I suggest you contact Oracle Support or Oracle Consulting for assistance.
because i can't install standalone oracle workflow successfully.
pls tell me how to use java api for function activity in embed oracle workflow?
are there some patch or pulg-in package?
ths a lot...........

Using recovery partition

I brought hp g6 with Windows7 and then I changed into Windows 8.but now I want to switch it back to Windows 7 using recovery partition how can it be done

Hello udayaram,
I see that you are trying to revert back to Windows 7 after a Windows 8 upgrade. When you upgraded to Windows 8 it changed the recovery partition to the Windows 8 partition.
Any recovery ran on the computer will take it back to the beginning of Windows 8 not Windows 7. To get back to Windows 7 you will need Windows 7 recovery discs.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How to use Flash Builder for Eclipse Luna ( is it possible??)

How to use Flash Builder for Eclipse Luna ( is it possible??)

Yes. I have Flash Builder 4.6 and 4.7 running in different Eclipse Luna installs.
More details at http://forums.adobe.com/message/4527443
On Mac, I had to have the 32bit version of Luna for 4.6, and the 64bit version of Luna for 4.7 (and I recently started using 4.7 with Eclipse Mars).
For 4.6 you need to first download Eclipse 3.6 and install the Flash Builder 4.6 plugin to that Eclipse install. For 4.7 you need to download Eclipse 3.7 and install the plugin to that Eclipse install. Once it's installed in the 3.x version, you can then copy the fb*.link files from the Eclipse 3.x dropins folders into your Eclipse Luna's dropin folder.
There is an issue where something in Flash Builder 4.7 won't work right when using it as a plugin, not sure but it might be something with building ANEs.

How to use Nokia mail for exchange

How to use Nokia mail for exchange for N82 so that it can push mails for gmail,yahoo.

It appears that what you are looking to do is from another product at Nokia called Nokia Messaging. Go to mail.nokia.com and setup a messaging account and add the gmail and yahoo accounts there. Then SMS send the configuration program to your device. Install it. it will add all the accounts to your device on install and will send messages to your device. So at this point you will have Mail for Exchange for you corporate mail and Nokia Messaging for you personal mail ( gmail and yahoo).

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded to LION. And update the EFI, I would like to replace the Snow Leopard, EFI can not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

How to use Batch operation for two xsodata services?

Hi All,
I have two xsodata services. How to use submit batch for two xsodata services
Thanks,
Mj

Gateway Batch Calls from SAPUI5

How to use recovery partition for installing OS

Similar Messages

Maybe you are looking for