How to use Relational Access Administrator from Express Administrator
I added the following [Relational Access Administrator] group to my xadmin.ini file:
[Relational Access Administrator]
InUse=-1
ExePath=f:\OraExpClnt\olap\Ead630\xadmin.exe
The Relational Access Administrator under Tools in the Express Administrator is still greyed out and I cannot access it.
Did I missed any step ? Any suggestions on how to make the Relation Access Administrator show ?
Thanks
Lee
null
Hi
When yr SAP is running at time u need to connect yr add-on Copyexpress. (CE)
then go in tool > open copy express
onces yr CE is open i other windows select source & target company.
Take a backup
select BP and upload (it wil take som time)
I hope this r basic step
Thanks
Kevin
Similar Messages
-
Error while building cube using Relational Access Manager - URGENT
When we try to build the Express Hybrid database using Relational Access Manager, We got the following error in the Windows NT Event log.
"[159] XCA Interface - Exception C0000005 occurred in the XTLLISTN:ClientThread() function in the XWCXCA.DLL module"
We are using Oracle Express 6.3.2 and Windows NT 4.0 Enterprise and Oracle 8.1.7
Kindly Help
Thanks & Regards
ashishWe are using Oracle Express 6.3.2 and Windows NT 4.0 Enterprise and Oracle 8.1.7
-------------------------------------------------------------------------------- Unfortunately your configuration is not officially certified. You will want to upgrade to Express 6.3.2.1 in order to run against Oracle 8.1.7.
Server Certifications for Windows NT 4.0:
Express 6.3.2 with Oracle EE 8.1.6
Express 6.3.2.1 with Oracle EE 8.1.7 & 9.0.1
Express 6.3.4 with Oracle EE 8.1.7 & 9.0.1 -
How to use relative paths in Captivate 8 / Cómo usar URL's relativas en Captivate 8
Hello, I have developed a bunch of courses which will be migrated to a new site and I am having trouble changing the absolute paths into relative URL's to resources such as PDF files inserted into the scorm packages. I cannot find information on how to use relative paths in Captivate. Please help. Thank you.
I have the same issue with relative links using Captivate 8. I am trying to load Captivate modules into an LMS using relative links to document files within the LMS. The links work fine during a site page test so not an issue in the LMS, but from the Captivate module they aren't working....
Help? -
Oracle:how to use max() function in case expression
how to use max() function in case expression, Please explain with any example
Hope this helps and should be self explanatory
with t as
(select 1 col,100 col2 from dual union
select 2 ,100 from dual union
select 2 ,200 from dual union
select 3,100 from dual union
select 3,200 from dual )
select col, case when max(col2)=100 then 'with 100 range'
when max(col2)=200 then 'with 200 range' end from t group by col -
How to use Sql data source from Essbase 9.3.1
Hi All,
How to use Sql data source from Essbase 9.3.1 for ASO cube.Are there any rules and limitations for that.
Do we need to create any data source connection for this purpose. If there please let me know the dteps to create that connection.
RegardsYes you need to create one DSN connection and you have to use DSN name and login details at the time of building/loading of the outline.
Create DSN
Goto Administrative tools -> DataSources (ODBC) and add the DSN name and specify the Server name of SQL and login details and database.
goto data prep editor and click on File Menu and Click on Open SQL option Next window opens.
There you have to enter the details of the DSN connection and SQL query to build/load.
Thanks,
Prathap -
hi yesterday i downloaded a software from i tunes for keyboard short cut and i don't know how to use them and install them, how to use keyboard shorts bought from i tunes
You can install it on your iOS device (iPad, iPhone, iPod Touch) either by redownloading it directly on the device via the Purchased tab in the App Store app on it, or by connecting the device to your computer's iTunes and syncing it to it.
Syncing apps from a Mac : iTunes 11 for Mac: Sync and organize iOS apps
from a PC : iTunes 11 for Windows: Sync and organize iOS apps
As to how to then use the app, if the description on the app's description page in the store doesn't describe how to use it in enough detail, then is there a link to the developer's website on its description page, and does that have details ? -
How to use 'DELETE ADJACENT DUPLICATES FROM' for deleting as some field
How to use 'DELETE ADJACENT DUPLICATES FROM' for deleting as some field
eg:
I have a inner table ,it contains a field named ast_guid,now,I search ten records,contains some duplicate records in the field of ast_guid.but I can not delete the duplicate records as ast_guid.If the type of inner table is standard table, you should sort the inner table by the fields before user 'DELETE ADJACENT DUPLICATES ', and use COMPARING addtion.
Edited by: Justin on Jun 28, 2009 9:48 AM -
How to use relational operator(NE) and aggregate expression sequentially
Hi,
I am trying to use "WHERE BEDAT NE MAX( BEDAT )" to find out PO date that is not the MAX Date but it always shows "incorrect expression "MAX(" in logical condition. Please give solution
Thanks
ArifHi Arif,
please try using a subquery:
select *
from ekko
where bedat ne
select max( bedat )
from ekko
endselect.
I hope this helps. Kind regards,
Alvaro -
JNI - how to use java access function in TypeLibrary( .tlb file) HELP ME PL
Hey All
I got one project which can be done by calling up functions in xxxx.tlb
(window type library) file, that is no problem.
How to use java to access those functions???
I know there are some classes which can be used to access function in
DLL file e.g. JAWIN.
Is the .tlb file related to one DLL file??? if so, how to locate the
DLL file through .tlb file???
Thanks a lot.
SteveUse JNI to create a link between Java class and a DLL, then you can load that DLL (or TLB) from that class.
Read the JNI Tutorials. -
Help me which JNDIFactory to use to access EJB from a java class of JAR
I am confused in understanding the different JNDI factories
RMIInitialContextFactory, ApplicationInitialContextFactory and ApplicationClientInitialContextFactory
And the different namespaces like global, container local and component local.
Especially is there any relationship between the JNDI factories and the namespaces?
Or are they related to the deployment descriptors.
Because in application specific deployment descriptors (orion-ejb-jar.xml), we just map the JNDI location with the object (or its reference from ejb-jar.xml). We dont specify it can be accessed from this factory or that.
Shall we access an EJB from using any JNDI factory?
Specifically, I am stuck with what Factory to use to access an EJB from a Java class in a library (jar). The JAR is packaged with the EAR which contains the EJB Jar that I am trying to access.
THANK YOUEd,
As Robin said, I think you need code similar to this:
Context c = new InitialContext();
Object o = c.lookup("java:comp/env/Name");where Name is the name of your EJB as it appears in the "ejb-jar.xml"
deployment descriptor XML file.
Good Luck,
Avi. -
How to use Relational OLAP?
How to use and/or create Relational OLAP (ROLAP)? Any information will help... Thanks
There are three ways to create OLAP metadata on a relational schema.
1) OEM - You can use the Dimension and Cube wizards in Enterprise Manager (Administration Tab -> BI & OLAP link) to create the required additional metadata to enable OLAP queries against an existing relational schema. However, you cannot save the steps or resulting script to a SQL file for re-use. This is more a one-off method for quickly and easily creating OLAP metadata.
2) OWB - A more scalable solution is to use Warehouse Builder. Even if you have an existing schema you can import the tables/views and then create new dimensions and cubes and map those tables to those objects. The deployment information can be saved to a script
3) You can refer to the OLAP developers guide to help you manually create the SQL scripts to generate the CWM OLAP metadata against existing tables.
Make sure you have all the required database patches in place:
9i - at least 9.2.0.7
10gR1 - at least 10.1.0.4
10gR2 - at least 10.2.0.3
Hope this helps
Keith -
Siebel8-How to use special character in WF expression
How to use a special Chanarcter in a Workflow expression?
in the below expression, am looking for comma
IIF(Instr([&ProccProp], "','"), 'Y', 'N')
But I am getting the following error
The query could not be run because there is an invalid character in the field '<?>'. Please ensure that the value in the field is formatted correctly with only valid characters.
Missing quotes around the search criteria or unnecessary punctuation will often cause an error.(SBL-DAT-00403)
The Siebel version is 8.
Thanks in advanceFine you already bypass this.
When i readed your post and saw your solution, i asked for myself what version of siebel you were using, and from the first post understood that was version 8.
Some months ago i have made workflows in siebel 8 and many times happened that i falled in situations and errors that were very very tricky to understand...workflow UI in that version, really needs some improvements.
Bye -
How to use the pps function from JCOP?
Hi
I'm trying to use the pps function from JCTerminal (JCOP API: [url http://www.cs.ru.nl/~woj/jcopapi/com/ibm/jc/JCTerminal.html#pps(int, int)]pps function ) to connect my client to a virtual card with a specific protocol (T=0).
But I always got the error: "Protocol and parameter selection not supported by this terminal!"
I've tried to make an ATR that support both protocol : [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]3B 90 95 80 81 1F C7 DC.
I really don't know what value to put in the second parameter (baud rate), I've tried with 150000, which is in the range of the ATR but I'm not sure this is correct. And I could't find any example of it.
I'm also not sure where to put the pps command, the specification say directly after a reset, so I tried this implementation:
System.out.print("Start");
readers = TerminalFactory.getDefault().terminals().list(State.CARD_PRESENT);
//If no readers has a card it ends the process
if(readers.isEmpty()){
System.out.println("\nNo card in the reader...");
return;
System.out.println("\nReader Type: "+readers.get(0).toString());
term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
term.open();
System.out.println("\nTerminal opened");
//Getting the ATR
atr = new ATR(term.waitForCard(2000));
try {
term.pps(JCTerminal.PROTOCOL_T0, (int)150000);
} catch (Exception e) {
e.printStackTrace();
System.out.println("ATR: "+toHex(atr.getBytes()));
//sending a data 11223344
System.out.println("\nsending data: 11223344");
byte[] responsesend = term.send(0,cmdsend,0,cmdsend.length);
System.out.println("Response data is:" + toHex(responsesend));
//close terminal
term.close();
System.out.println("\nTerminal closed");I've got this output on the console:
<font size="2">StartReader Type: PC/SC terminal Virtual CAD Reader 0
Terminal opened
ATR: 3b 90 95 90 00 81 1f c7 cc
sending data: 11223344
<font color="red">Protocol and parameter selection not supported by this terminal!</font>
at com.ibm.jc.JCTerminal.pps(Unknown Source)
at com.test.essai.main(essai.java:46)
</font>>
And If I take a look at the data exchanged with the card:
<font size="2">Running in Virtual Card mode...
ATR: 3B909580811FC7DC
Waiting for event (power: off, protocol: unknown/undefined)...
Waiting for event (power: off, protocol: unknown/undefined)...
Raw event data: 01
Event: VCAD_EC_POWER_ON (0x01)
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_ON) ATR: 3b909580811fc7dc
Raw reply data: 003b909580811fc7dc
Sending reply...
Waiting for event (power: on, protocol: unknown/undefined)...
Waiting for event (power: on, protocol: unknown/undefined)...
Raw event data: 06ff11957b
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: ff11957b
Accepting any PPS request parameters: Protocol: t=1; FI=9, DI=5
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: ff11957b
Raw reply data: 00ff11957b
Sending reply...
</font>>
This (above) is the PPS command but not from the PPS function, it is always sent with protocol T=1
<font size="2">Waiting for event (power: on, protocol: t=1)...
Raw event data: 0501
Event: VCAD_EC_SET_PROTOCOL (0x05) Protocol: t=1
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_SET_PROTOCOL)
Raw reply data: 00
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0600c10120e0
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00c10120e0
Handling protocol-specific command...
Protocol block:
NAD: 0x00
PCB: 0xc1 (T1_S_BLOCK); S-Block type: T1_SBT_IFS_REQ
LEN: 1
INF:
IFS: 20
EDC: 0xe0
Changing IFS(other) from 32 to 32
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00e10120c0
Raw reply data: 0000e10120c0
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 0600001300a404000d54657374436c69656e7441707000f0
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00001300a404000d54657374436c69656e74
41707000f0
Processing app. command...
App. block:
NAD: 0x00
PCB: 0x00 (T1_I_BLOCK); Seq. #: 0; More data: 0
LEN: 13
INF:
00a404000d54657374436c69656e7441707000
EDC: 0xf0
cmd name: N/A (class #4)
cmd: 00a40400 0d 54657374436c69656e74417070 70
Responding with the reversed command data, SW is hardcoded to 90<INS>
rsp: 707041746e65696c4374736554 90a4
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00000f70704
1746e65696c437473655490a475
Raw reply data: 0000000f707041746e65696c437473655490a475
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 060040041122334400
Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 0040041122334400
Processing app. command...
App. block:
NAD: 0x00
PCB: 0x40 (T1_I_BLOCK); Seq. #: 1; More data: 0
LEN: 4
INF:
11223344
EDC: 0x00
cmd name: N/A (class #1)
cmd: 11223344
Responding with the reversed command data, SW is hardcoded to 90<INS>
rsp: 9022
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 0040029022f
0
Raw reply data: 000040029022f0
Sending reply...
Waiting for event (power: on, protocol: t=1)...
Raw event data: 03
Event: VCAD_EC_POWER_OFF (0x03)
Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_OFF)
Raw reply data: 00
Sending reply...
Waiting for event (power: off, protocol: unknown/undefined)...
</font>>
If someone know how to use this function or have any advice to help me to select a specific protocol with Jcop API, please let me know.
If you you need any more information don't hesitate to ask.
Best regards
Edited by: Cyril on Sep 22, 2011 9:54 AM-1
I'm using a virtual terminal (windows driver), and I don't see how I could turn off the Auto-pps. I've also tried with a real reader and a card and I have the same error.
-2
I've tried value in the range of the atr (based on this analysis: [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc ). But I don't know if only I value of baud-rate is possible in the range. Anyway I just would like to change the protocol, not the baud-rate.
-3
I've already tried to call pps function before, after the first reset, or with another reset later and I always got the same thing.
term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
term.open();
System.out.println("\nTerminal opened");
//Getting the ATR
atr = new ATR(term.waitForCard(2000));
System.out.println("ATR: "+toHex(atr.getBytes()));
jcard = new JCard(term,atr,0);
jcard.reset();
try {
term.pps(JCTerminal.PROTOCOL_T0, (int)312500);
} catch (Exception e) {
e.printStackTrace();
}The same pps is always send after each reset... -
How to use Direct Access URL in the FORM tag
I want to substitute the pageid url (/servlet/page?_pageid=161&_dad=portal30&_schema=PORTAL30) with the direct access urls (pls/portal30/url/page/my_page) to address the pageid conflict between development server and production server.
It works perfectly fine in the redirection code such as:
self.location.href="/pls/portal30/url/page/next_page". But I got "Page can not be found" error message when I use it in the <FORM> tag:
<FORM ACTION="/pls/portal30/url/page/next_page" METHOD="POST" NAME="my_form">
Does anyone out there know how to use the direct access url inside the <FORM> tag? I am trying not to write a bunch of code just to retrieve and insert the pageid at the run time.
Thanks in advance.
ArthurUse condition. If you are validating a record, just out the desired check in the condition field for that specific item.
Thanks
Nagamohan -
How to use relational operator in JSF EL
Hi,
I am trying to set the insert allowed property for the subtab based if the no.of records in the sub tab is less than 2. So i tried the following expressions in the insert allowed property
1. #{bindings.OvrBrowseTypesIterator.estimatedRowCount < 2} which leads to compilation errors - no start tag found etc..
2. #{bindings.OvrBrowseTypesIterator.estimatedRowCount ls 2} which leads to runtime error - encountered "ls" at line 1 col 1752 when expecting one of the following "(" , "<" , ">" etc....
Please advise if any one has used relational operators in the EL.
Thanks, PradeepI found the mistake. I should use "lt" instead of "ls" for less than.
#{bindings.OvrBrowseTypesIterator.estimatedRowCount lt 2} works fine.
Maybe you are looking for
-
Drop Down Menu not functioning
I'm very VERY new to dreamweaver/fireworks but have been making small changes to multipul websites for a company. They have asked me to come up with a totally new design for their primary webpage and I'm having an issue with the drop-down menu. I'm c
-
How to set semaphores configuration in Solaris 10 zones
Dear All: I have a Sun SPARC T5120 with 16gb RAM. I have created three zones on that servers. Each zone I have configured 4gb RAM. I mean 3 zones will take 4*3=12gb RAM. In the first zone Oracle Database 11g installed. SGA has 3gb In the second zone
-
Display field as Verticaly in Report Builder
Hello Guys. I have question regarind to field. I have generate a report where i have group_by_column template. Now, I need to rotate my group column heading from Horizontal to Vertical. Does anyone know how to rotate the field from Horizontal to Vert
-
hi how can i make something like mail signature in apple mail ?
-
Updated to iTunes 10.2.1 and now it crashes every time on startup
Hi all, I updated to iTunes 10.2.1 last night, when I try to run iTunes it just crashes with the following error information EventType : BEX P1 : iTunes.exe P2 : 10.2.1.1 P3 : 4d756476 P4 : icuuc40.dll P5 : 4.0.0.3207 P6 : 4d3b6a8e P7 : 00073335 P8 :