How to use Results from Another Query for SAP BW universes

Hi Everyone,
I have two SAP BI universes.In my First universe I have Sales Doc no (dimension) and Orderqty (Measure) and in my second universe I have Sales Doc no(Dimension) and BillQty (Measure).
Here in my first dataprovider I have 1200 rows of data and in second dataprovider I have 75,000 rows. The report should fetch only the BillQty details that matches to corresponding Sales doc no in first data provider.
I want to place all these fileds into a single report like as shown.
(Datarpovider1) (Datarpovider1) (Datarpovider2)
*Sales Doc No* Orderqty BillQty
Here I am able to generate single report using merge dimension but it is leading to performance issues. I want to restrict the values at query level by passing the First dataprovider Sales doc no to second Data provider Sales doc number using Results from Anothery Query feature so that It can fetch only the matching records.
I tried it but it was giving the follwing error:
A filter contains a wrong value. You cannot run this query. (Error: WIS 00007)
How Can I get rid of this error. Can we use Results from Anothery Query option for OLAP universe. Are there any limitation on it.
All this I am doing in Webi Rich Client.
Appreciate your help
Thanks &in Advance
Kiran Saka

Hi Kiran,
I think the filter has a wrong operand. For example, a filter with an empty constant, or a filter that deals with numeric values is defined with an alphanumeric value.Check out for this.
Regards,
Neeraj

Similar Messages

Can we use Result from another query in Webi using Bex uery universe?

Hi,
Can we use Result from another query filter option in Webi to create a report using a Bex Query universe?
I need to create a report using two universes, one is Bex Query Universe and the other is Orcle universe. I have two queries, one is using Oracle universe; the other using Bex Query universe. I need to pass the Oracle data from the Oracle query to the Bex Query query to get the matched data from SAP Bex query.
I used Result from another query in the query filter panel for the query using Bex query universe. But I got an error saying that 'A filter contains a wrong value. you cannot run this query. (Error: WIS 00007). The data used in the filter on both sides are the same. they are char.
I have tested by using two queries from the same Bex query universe to see if the Result from another query filter option works. And I got the same error.
Has anyone run into the same issue and if this is possible and what should be the solution?
Thanks in advance!
Edited by: BO_Haiyan on Oct 6, 2010 3:47 PM

In that situation:
Create two queries : Oracle and BW query.
@ Report:
As you have to see result set from both the Dataproviders, correct? To achieve thise one must have common dimension objects to merge them at report and use Objects those are coming from both queries to use them in single Table/Report.
Unless you don't use Merge Dimensions, you don't get a chane to use both queries objects in single Table/Report. (It will give tooltip saying: You can't drop here -- Incompatable Objects)
In case, if you don't have common dimensions, change object definitions to Detail objects, for those required.
Hope it helps you.
Thank You!!

Unicode String Issue while Using Results from Another Query

Hi All,
In a webi report i have 2 queries say Sales Out and Investment. I need to have only those chains which are in Investement in Sales Out.
So in Sales Out query i am using the option Results from another Query. The Chain values are in Unicode format.
Though in universe i have Set Parameter Unicode_String ='Yes', this does not get applied when using option Results from another Query.
Is there any solution to resolve this problem.
Thanks
Madhura

leonhardtk wrote:
I need to take values from the column of one table that meets certain critera, and create inserts into another table that includes this data.
For example...
{code}
select emp_last_name from emp where emp_first_name like 'B%';
Duncan
Fitzgerald
Johnson
Smith
{code}
I then want to insert these values into another table:
{code}
insert into My_table values (
sequence.nextval,99,99,[last_name]);
{code}
In the example above, I need it to insert a new row into My_table for where the "last_name" is each of the names from the select statement above (Duncan, Fitzgerald,Johnson,Smith).
Based on other similar forum questions it looks like I should be doing something like:
{code}
INSERT INTO MY_TABLE
(SELECT sequence.nextval,
                99,
                99,
               (select EMP_LAST_NAME
                FROM EMP
                WHERE EMP_FIRST_NAME LIKE 'B%')
{code}
But this (obviously) doesn't work!
Appreciate any assistance on this!
KSL.
Hi,
Created this test data
create table plch_test (name varchar2(50));
insert into plch_test values('AKSHAY');
insert into plch_test values('RAHUL');
insert into plch_test values('APARNA');
output
1    AKSHAY
2    RAHUL
3    APARNA
created another destnation table(in your case "my table")
create table plch_test_1 (id number,name varchar2(50));
created another sequence to generate employee ids
create sequence test_seq;
Now populated the desination table
insert into plch_test_1(select test_seq.nextval,name from plch_test);
verify the destination table
select * from plch_test_1
1    AKSHAY
2    RAHUL
3    APARNA
Hope this helps
Regards,
Achyut Kotekal

Combine query, result from another query on SAP BI query Universe?

Hello all,
We are using SAP BI queries as datasource for our universes. Is the combined query option disabled for webi reports written on such universes?
result from another query - is this option active for such webi reports? I see both these options greyed out so wanted to check.
One last thing what is really difference between subquery and results from another query? subquery - you can use filters from that one data provider only right? or can you use a different data provider/report in sub query?
Thanks a lot for all the replies.

Hi,
in BO 3.1 Combined query and result from another query options are not available in webi report on OLAP Universes (SAP BW Universe.)
Thanks,
Amit

Issue with Results from Another Query (Error on Null value)

Hi All,
We have a WebI report using "Result from Another Query" option of BO XI R3.1. The report was running fine till recently the dimension object using result from another query had a null value. Report suddenly throwed error as the query filters are invalid.
Is there a way to make this filter optional if no data/null value is there ? Because we need those null values in report as well.
Thank you for your time.
Thanks & Regards
LN

Hi Vivek,
It was not directly solved but I applied alternate logic to over come the issue.
Here's what I did to overcome:
I used a sub query in place of the whole result from another query.
For Ex:
Dim1 inlist result from another query1
I made it as
Dim1 inlist (Dim0)
where Conditions.
Here Dim0 is the object which we use for Result from another query and Conditions will be the necessary filter conditions to arrive proper Dim0. Make sure proper context is formed for the sub query.
Even though it resolved my problem, It introduces an new issue. It causes increase in query run time when huge set of data is returned from sub query.
Please let me know if i haven't explained clearly.
Hi Aris_BO,
Sorry for not responding earlier. The logic would probably make more queries null & not null. Thats why I was not advised to use it.
Thanks
LN

Query on results from another query

Post Author: Duncan1980
CA Forum: Crystal Reports
Is it possible to query on the results from another query. I have a query that produces a list of document numbers. I want to use the output from that query as the filter criteria in a another query in the same Universe.
The output from the first query can be as much as 2000, so it would be very time consuming to cut and paste these into a filter.
Both reports are built, but can not figure out how to link the first report output to the filtering criteria on the second report. I
I am using business objects XI release 2 web intelligence 11.5.3.417 enterprise.

Hi Vivek,
It was not directly solved but I applied alternate logic to over come the issue.
Here's what I did to overcome:
I used a sub query in place of the whole result from another query.
For Ex:
Dim1 inlist result from another query1
I made it as
Dim1 inlist (Dim0)
where Conditions.
Here Dim0 is the object which we use for Result from another query and Conditions will be the necessary filter conditions to arrive proper Dim0. Make sure proper context is formed for the sub query.
Even though it resolved my problem, It introduces an new issue. It causes increase in query run time when huge set of data is returned from sub query.
Please let me know if i haven't explained clearly.
Hi Aris_BO,
Sorry for not responding earlier. The logic would probably make more queries null & not null. Thats why I was not advised to use it.
Thanks
LN

Results from another Query - not available

HI,
My environment is Business Objects XI 3.1 SP2 Edge series , i have below quereis with web Intelligence Reports
1. not available the functions/options Results from another Query(Any) or Results from another Query(ALL) at Query Level.
2. not getting list of Values for pronpt until i refresh values for prompt?
Please suggest me is there any fix packs available for the same to availle that functionality.
Best Regards,
Reddeppa K

not getting list of Values for pronpt until i refresh values for prompt?
There is option called "Automatic refresh before use" for the object properties available in the universe designer.
Please check the box for the object you are using for populating the list of values and export the universe.
not available the functions/options Results from another Query(Any) or Results from another Query(ALL) at Query Level.
There is a limitation for the query on query functionality that the both the queries can-not be from the OLAP universe.
I guess the query which needs to be filtered should be built on universe from the relational data base.
Regards,
Rohit

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

How to compare result from sql query with data writen in html input tag?

how to compare result
from sql query with data
writen in html input tag?
I need to compare
user and password in html form
with all user and password in database
how to do this?
or put the resulr from sql query
in array
please help me?

Hi dejani
first get the user name and password enter by the user
using
String sUsername=request.getParameter("name of the textfield");
String sPassword=request.getParameter("name of the textfield");
after executeQuery() statement
int exist=0;
while(rs.next())
String sUserId= rs.getString("username");
String sPass_wd= rs.getString("password");
if(sUserId.equals(sUsername) && sPass_wd.equals(sPassword))
exist=1;
if(exist==1)
out.println("user exist");
else
out.println("not exist");

WHERE using results from another querie

Hi,
Example:
<cfquery name="QUERY 1" datasource="MyDatabase">
SELECT Table1ID, A, B, C
FROM Table1
WHERE A = #Form.A#
<cfoutput query="QUERY1">#A#<br></cfoutput>
It returns:
3
4
<cfquery name="QUERY 2" datasource="MyDatabase">
SELECT Table2ID, A, Z, Y
FROM Table2
WHERE A IN (3,4)
<cfoutput query="QUERY
2">#Table2ID#</br></cfoutput>
It returns:
a
b
c
d
e
f
But if I make QUERY2 as:
<cfquery name="QUERY 2" datasource="MyDatabase">
SELECT Table2ID, A, Z, Y
FROM Table2
WHERE A IN (#QUERY1.A#)
it returns only:
a
b
c
The values a,b,c are the Table2ID's where A=3
The values d,e,f are the Table2ID'a where A=4
How can I make return all values?
Hope you understand.
Thanks
Manel

Think about what you are doing for a second. You are
selecting multiple rows of data with your first query. Then you are
using a cfloop to loop through each row returned from that first
query to perform another query that uses the value returned in the
A column. The problem is that you are executing your second query
once for each row returned by your first query, and you really
aren't saving that result anywhere, since each iteration of the
loop causes your cfselect to overwrite your previous results. You
can create a list variable and populate it with the results from
your first query, but I have to ask, unless you need the results
from your first query for something else, why don't you just join
the two tables and use on equery?
Based on what you have, something like this?
<cfquery name="QUERY 2" datasource="MyDatabase">
SELECT T2.ID, T2.A, T2.Z, T2.Y
FROM Table2 T2
INNER JOIN Table1 T1 ON T2.A = T1.A
WHERE T1.A = #Form.A#
</cfquery>
Phil

How to use results from first select to run from second select w/subselect?

-- I create a table with three fields: Name, Amount, and a Trans_Date.
CREATE TABLE TEST
NAME VARCHAR2(19) NULL,
AMOUNT VARCHAR2(8) NULL,
TRANS_DATE DATE NULL
-- I insert a few rows into my table:
INSERT INTO TEST ( TEST.NAME, TEST.AMOUNT, TEST.TRANS_DATE ) VALUES ( 'Bill', '110', TO_DATE('06/01/2005 08:00:00 PM', 'MM/DD/YYYY HH12:MI:SS PM') );
INSERT INTO TEST ( TEST.NAME, TEST.AMOUNT, TEST.TRANS_DATE ) VALUES ( 'Bill', '20', TO_DATE('06/02/2005 08:00:00 PM', 'MM/DD/YYYY HH12:MI:SS PM') );
INSERT INTO TEST ( TEST.NAME, TEST.AMOUNT, TEST.TRANS_DATE ) VALUES ( 'Bill', '110', TO_DATE('06/03/2005 08:00:00 PM', 'MM/DD/YYYY HH12:MI:SS PM') );
INSERT INTO TEST ( TEST.NAME, TEST.AMOUNT, TEST.TRANS_DATE ) VALUES ( 'Bill', '21', TO_DATE('06/04/2005 08:00:00 PM', 'MM/DD/YYYY HH12:MI:SS PM') );
INSERT INTO TEST ( TEST.NAME, TEST.AMOUNT, TEST.TRANS_DATE ) VALUES ( 'Bill', '68', TO_DATE('06/04/2005 08:00:00 PM', 'MM/DD/YYYY HH12:MI:SS PM') );
INSERT INTO TEST ( TEST.NAME, TEST.AMOUNT, TEST.TRANS_DATE ) VALUES ( 'Bill', '110', TO_DATE('06/05/2005 08:00:00 PM', 'MM/DD/YYYY HH12:MI:SS PM') );
INSERT INTO TEST ( TEST.NAME, TEST.AMOUNT, TEST.TRANS_DATE ) VALUES ( 'Bill', '20', TO_DATE('06/06/2005 08:00:00 PM', 'MM/DD/YYYY HH12:MI:SS PM') );
INSERT INTO TEST ( TEST.NAME, TEST.AMOUNT, TEST.TRANS_DATE ) VALUES ( 'Bill', '43', TO_DATE('06/07/2005 08:00:00 PM', 'MM/DD/YYYY HH12:MI:SS PM') );
INSERT INTO TEST ( TEST.NAME, TEST.AMOUNT, TEST.TRANS_DATE ) VALUES ( 'Bill', '77', TO_DATE('06/08/2005 08:00:00 PM', 'MM/DD/YYYY HH12:MI:SS PM') );
INSERT INTO TEST ( TEST.NAME, TEST.AMOUNT, TEST.TRANS_DATE ) VALUES ( 'Bill', '221', TO_DATE('06/09/2005 08:00:00 PM', 'MM/DD/YYYY HH12:MI:SS PM') );
INSERT INTO TEST ( TEST.NAME, TEST.AMOUNT, TEST.TRANS_DATE ) VALUES ( 'Bill', '43', TO_DATE('06/10/2005 08:00:00 PM', 'MM/DD/YYYY HH12:MI:SS PM') );
INSERT INTO TEST ( TEST.NAME, TEST.AMOUNT, TEST.TRANS_DATE ) VALUES ( 'Bill', '73', TO_DATE('06/10/2005 08:00:00 PM', 'MM/DD/YYYY HH12:MI:SS PM') );
commit;
-- These are the current select statements I am using:
-- Last 10 days
SELECT SUM(t.AMOUNT) AMOUNT10, NULL AMOUNT5, NULL AMOUNT3
FROM test t
WHERE t.NAME = 'Bill'
AND t.TRANS_DATE >= TO_DATE('06/01/2005 08:00:00 PM','mm/dd/yyyy hh12:mi:ss am')
AND t.TRANS_DATE <= TO_DATE('06/10/2005 08:00:00 PM','mm/dd/yyyy hh12:mi:ss am')
UNION ALL
-- Last 5 days
SELECT NULL AMOUNT10, SUM(t.AMOUNT) AMOUNT5, NULL AMOUNT3
FROM test t
WHERE t.NAME = 'Bill'
AND t.TRANS_DATE >= TO_DATE('06/06/2005 08:00:00 PM','mm/dd/yyyy hh12:mi:ss am')
AND t.TRANS_DATE <= TO_DATE('06/10/2005 08:00:00 PM','mm/dd/yyyy hh12:mi:ss am')
UNION ALL
-- Last 3 days
SELECT NULL AMOUNT10, NULL AMOUNT5, SUM(t.AMOUNT) AMOUNT3
FROM test t
WHERE t.NAME = 'Bill'
AND t.TRANS_DATE >= TO_DATE('06/08/2005 08:00:00 PM','mm/dd/yyyy hh12:mi:ss am')
AND t.TRANS_DATE <= TO_DATE('06/10/2005 08:00:00 PM','mm/dd/yyyy hh12:mi:ss am');
-- This is the current output:
AMOUNT10 AMOUNT5 AMOUNT3
916 NULL NULL
NULL 477 NULL
NULL NULL 414
Is there a way to combine these statements to speed up performance?
I'm thinking there should be a way to select all the rows in the last tens days, and then just from those results, run another select to get the results for the last 2, 3, or 5 days using subselects in some way. Any help is appreciated. Thanks.
I don't mind getting results in one row like this:
AMOUNT10 AMOUNT5 AMOUNT3
916 477 414

Thank you for providing create table and insert scripts, along with the query so far. It makes providing an answer so much easier.
Does this help?
SQL> select sum(amount10) amount10, sum(amount5) amount5, sum(amount3) amount3
2 from
3      (
4      select
5          case when
6              t.TRANS_DATE >= TO_DATE('06/01/2005 08:00:00 PM','mm/dd/yyyy hh12:mi:ss am')
7              AND t.TRANS_DATE <= TO_DATE('06/10/2005 08:00:00 PM','mm/dd/yyyy hh12:mi:ss am')
8          then
9              amount
10          end amount10,
11          case when
12              t.TRANS_DATE >= TO_DATE('06/06/2005 08:00:00 PM','mm/dd/yyyy hh12:mi:ss am')
13              AND t.TRANS_DATE <= TO_DATE('06/10/2005 08:00:00 PM','mm/dd/yyyy hh12:mi:ss am')
14          then
15              amount
16          end amount5,
17          case when
18              t.TRANS_DATE >= TO_DATE('06/08/2005 08:00:00 PM','mm/dd/yyyy hh12:mi:ss am')
19              AND t.TRANS_DATE <= TO_DATE('06/10/2005 08:00:00 PM','mm/dd/yyyy hh12:mi:ss am')
20          then
21              amount
22          end amount3
23      from
24          test t
25      where
26          t.name = 'Bill'
27      AND t.TRANS_DATE >= TO_DATE('06/01/2005 08:00:00 PM','mm/dd/yyyy hh12:mi:ss am')
28      AND t.TRANS_DATE <= TO_DATE('06/10/2005 08:00:00 PM','mm/dd/yyyy hh12:mi:ss am')
29      );
AMOUNT10    AMOUNT5    AMOUNT3
       916        477        414
SQL>Message was edited by:
3360
Durn, pipped by flakey forums and the return of v garcia.

How to get result from another JSP file?

I have to write a jsp (my.jsp) to get information from another jsp file (other.jsp).
The other.jsp return integer value (0 / 1) so that user can tell if certain service is available or not. And in my.jsp I need to collect such result and other information from a text file to make up of a XML string.
How can I call other.jsp to get the result? Thanks a lot.

Hi, I think I didn't describe the problem clearly
enough. In fact, there is a JSP file, and if our
database is currently connected, the JSP will return
value 1, otherwise, it will return 0. My java program
need to get that result, and then form an XML string,
and send the string back to the client. I'm just
wonder how can I write such a program to read result
from JSP file. Thanks a lot.Why is this function implemented as a JSP file? It should be implemented as a bean. It would be simple to get the information you require from that bean.

Filter by "Result from another query" option not available in Webi

Hi all
I am trying to filter one query by zipcode based on the results of a previously run query in the same report. However this option is not available on the drop down when I drag zipcode into the filter pane. I am restricted to the options: Constant, Value(s) from a list, Prompt or Object.
I have "use subqueries enabled" within my universe and the data is held in an RMDBS (i.e. it is not an OLAP universe) so I expected this functionallity to be available.
I am using XI 3.2 and Java version 1.6.0.15, i.e. up to date.
Any help would be greatly appreciated.
Thanks
Sharon

Sharon,
Here is one method to achieve your objective, however, it involves the use of Merge Dimensions. Here goes:
In the Edit Query mode, build two queries, where the first query has all the objects, to include Zip code, and the second query has the zip code, filtered for the one at hand. (you probably have done this portion already)
In the Edit Report mode, think of your data set as Query1 (all the data objects you want) and Query2 (zip code and filtered on that zip code) and thus you'll have Query1.zip and Query2.zip. If you build a grid containing all the data you want from Query1, then simply add Query2.zip to that grid, voila, the grid will be "filtered" due to the "merge" that occurs under the wire. The 'problem' here is that you have two columns that are repetitive and there is no inherent way to "hide" a column in WebI other than masking the column with white on white (font/borders) or some folks sometimes apply Alterters to achieve the same.
Best of luck in moving forward with your task.
Thanks,
John

How connect one client from another client in SAP.

hi
In my company,HR module is in independent client.
So other Module FI want to get HR information.i want to write a function in HR system.
in FI module to call it and return data. (RFC).
how set it ? the two R/3 System can access one another.
how write abap code in report ? please give demo,thank you!

t_code sm59.
http://help.sap.com/saphelp_nw04/helpdata/en/22/0424ce488911d189490000e829fbbd/content.htm

Using "Object from this query" as a filter parameter

Hi Folks,
I am looking to find a solution to a requirement where I need to filter data in a report based on the current year. I do not want to use the BEx functionality for filtering and want to leverage the BObj query filters. My idea was to create a "variable" in the BObj query to get the current year and hopefully use that as a filter parameter for 'Object in this query". But The options "Object in this query" and "Result from another query" are greyed out. I am using BObj 4.0 patch 12.
Do any of you have suggestions on how to accomplish this.
Regards,
Doniv

Hi,
prerequisite to using the operators you mention is to have 2 dataproviders queries first.
However, it might be that those kind of operators aren't implemented for the current BICS interface, same goes with Unions, OR operator.
I know you can do this with Relational UNX, but BEX direct access has shortcomings in the query panel.
might be worth to try this again if you can get your hands on FP03 ramp up. things change again , for the better, there.
Regards,
H

How to use Results from Another Query for SAP BW universes

Similar Messages

Maybe you are looking for