How to use Retiming behaviors in effect templates?

I am trying to use some of the behaviors from the Retiming group in a Motion 5 template. However, I can't apply any of these behaviors to my template.
Strange enough, it once succeeded but I can't figure out how I managed to do this. Any suggestions?

Found the answer myself...I need to use the appropriate FILTER, not the BEHAVIOR!

Similar Messages

  • How to use the set functions effectively in webi ,please let me know with detail

    how to use the set functions effectively in webi ,please let me know with detail

    Hi,
    we use use set functions on heirarchies with aggregate functions mostly .
    If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
    Member_set can include multiple sets separated by semicolons (;).
    The list of member sets must be enclosed in {}.
    If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
    Eg .
    1)     Ancestor
    =Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
    2)     IsLeaf
    =[Test Hierarchy].IsLeaf
    You can use this function when you want to show your Measure only at lower level .
    3)     .Depth
    =[Test Hierarchy].Depth
    This is also function used with hierarchy to find Level of Members .
    Follow this link for PDF reference .
    Page 147
    https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
    search on SCN this question was discussed before also one those links .
    http://scn.sap.com/thread/3183380
    Hope this will help you .

  • I was wondering how to use Dreamweaver to create joomla template? Any ideas or useful resources.

    I am embarking on a new project to create a joomla template. I need your ideas on how to use Dreamweaver to create the template. TQ

    It's pretty much the same procedure with all your open source CMSs (WordPress, Drupal, Joomla!...)
    Start with this 4 Part Tutorial:
    http://www.adobe.com/devnet/dreamweaver/articles/dw_wordpress_pt1.html
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • How to use my external processor effects?

    I have a lexicon processor and I want to know how to use it with logic.
    Thanks
    g5 ma' os   Mac OS X (10.4.4)  

    I hope this info can help you.
    The main Problem is that Logic don't have an delay compensation plugin like in nuendo or cubase "external FX"
    Here is the info to compensate the delay coused by the D/A and A/D converters:
    6.30 How do I set-up record / playback / monitoring delay?
    Subject: Record delay vs send/return using external effect units
    You'd think that with modern multichannel audio interfaces and a modern, professional audio sequencer like Logic, this would be a piece of cake, right? It turns out that there are a number of potential traps, all to do with Logic's highly inadequate record delay compensation. What follows is a run through of the general setup procedure, using my RME Multiface.
    Basic Record/Playback delay Setup
    Set up a 4/4 audio click track (trim the sample starts so they are right on the beats). Use real audio, not a software instrument. Rerecord the main outs to a new track via a hardware loopback cable (i.e. cable your audiocard's outputs into its inputs). Measure the clicks with reference to bars/beats in the Sample Editor - the clicks should be (but may not be) recorded right on the beat.
    If the audio driver has a record delay parameter in samples, use that to adjust. If not - use the ASIO Buffer delay "IN" for coarse adjustment (multiples of buffer). Leave the ASIO Buffer delay "OUT" at zero. Use the main driver playback delay for final fine adjustment (samples). Do NOT use the Arrange window's delay parameter - it's in ticks and thus tempo-dependent!
    So if you are playing in time with a prerecorded track, your playing is recorded in the correct position to preserve your exact timing on playback.
    The use of the playback delay to compensate is not ideal, as it will mess with the playback timing vs displayed position of any audio - this has an adverse effect on fine editing, and MIDI-to-audio sync - but Logic unfortunately does not provide a sample-accurate record delay adjustment, and has not done so since version 3.5...
    Effect Return/Record Setup
    You definitely want to avoid monitoring external FX returns through Logic if at all possible, since that would add 2x the audio buffer worth of latency to the return, which will adversely mess with the sound of any time-based effects (i.e. just about everything). So, monitor your external FX returns at source, or through direct hardware monitoring - in my case that's through RME TotalMix routed to the main outs for (near) zero latency.
    You probably want to be able to record the external FX outputs into Logic (to free up the FX for other uses) and have it play back exactly as it was monitored, right?
    Using your 4/4 audio click track, panned left, send to an external delay (approx 1/2 beat, single repeat). Pan the delay return R at source and monitor as above. Rerecord the main outs to new track via a hardware loopback cable. Measure the number of samples from a click to its delay in the Sample Editor
    Now record the delay return signal to a new track. Playback just the audio click panned left & the recorded delay panned right. Rerecord the main outs to new track via hardware loopback cable. Measure the number of samples from click to delay in Sample Edit.
    Both measurements must be the same for accurate recording of FX returns, but it's likely they won't be, probably because the playback delay has been messed with. Compensate by inserting a sample delay on the FX return Input Objects in Logic. Since you're not monitoring the FX returns through Logic anyway, the input delay will be recorded but not monitored (in 5.2+, but if you use an earlier version you're hosed since effects are not recorded).
    Record the delay return again, play it back with the click, rerecord the outputs and measure again. Adjust the input sample delay until the recorded-&-played-back delay position is identical to the monitored delay.
    Live Input Monitoring/Recording
    For accurate timing, monitor any live inputs at source or through direct hardware monitoring (TotalMix), the same as for FX returns. When recorded, playback timing will be accurate. Sends from live inputs to external FX can also be applied in at source or in TotalMix. No problem.
    Live Input Monitoring Through Logic
    Here's where the problem starts. If you also plan to monitor some live inputs through Logic - to add Logic FX, or to control & automate the live inputs, or to add live inputs to a bounce, etc - then you'll be monitoring the live inputs with a latency of 2x the audio buffer size (or more if applied processing induces further delays). Therefore when you record a live input, on playback it will be early by that amount, since the record/playback delay is set up to compensate for zero-latency monitoring. What you heard live is not what you get on playback.
    There's no set-&-forget way around this, since Logic won't let you apply a sample delay to an input without the delay also being applied to the input's monitor output from Logic. So using the same input delay trick you applied to recording the FX returns won't work - you'll wind up monitoring with even more delay, which will need yet more input compensation, and so on. You can't use the record/playback delay to compensate, because that would screw up the recording of source-monitored material.
    You could conceivably monitor everything through Logic at all times, and use a single record/playback delay to compensate for all of it (with the editing & MIDI-to-audio sync shortcomings discussed, but on a larger scale as considerably more compensation is required), but that will screw with the sound of any time-based external FX as noted above.
    So assuming you stick with source-monitoring the external FX returns, there are 2 options for correct playback timing of any recorded tracks that were monitored through Logic while recording:
    1 - Output all such tracks to a bus, and place a Sample delay on that bus to compensate. This will correct the playback you hear, but it won't correct the bad positioning of the audio.
    2 - Physically move the recorded audio later to compensate. Uh-oh - Logic's Arrange window is not sample-accurate. And it's not possible to move a newly recorded audio region later in the Sample Editor without adding samples to the start of the file, which is a tedious process if you've just recorded a number of tracks. You'll just have to get it as close as you can in the Arrange - bear in mind that ticks are tempo dependent, so you have to calculate the number of ticks based on the current song tempo (let's not even begin to discuss Audio vs tempo changes in Logic), or use the smallest SMPTE nudge available. No fun at all.
    If anyone has any other suggestions, I'm all ears...
    So what about OS-X?
    In Logic under OS X, the CoreAudio driver setup panel doesn't have any record/playback delay setup. If you're optimistic, you might interpret that as an indication that it's all done automatically by CoreAudio and the driver. But given Emagic's history in this area, what's the bet it's currently a big fat inaccurate mess? Rumblings from the Mobile i/o list seem to indicate this...
    G5 dual 2,5   Mac OS X (10.4.4)  

  • How to use jsp:scriptlet in site template

    hi all,
    I want to use <jsp:scriptlet> in site template, but jdev showed me an error msg when I put <jsp:scriptlet> in site template:
    scriptlet can not work properly with OJSP, I checked the forums, one possible solution is to encapsulate java code in jsp taglib, but I dislike this solution.
    Is there a way to disable OJSP? or any solution to use java code in site template?
    Best regards

    I believe the official word is if you are trying to use java code in a scriptlet in your site template then you are doing something wrong.
    The goal is to keep java code separate from the template and pages. Any logic should go to your supporting serviece objects and all of your front-end work should be accomplished using available or custom tags.
    Can you describe what you are trying to accomplish with this java code in your template?

  • How to use ColumnList MOde in Query Template

    Hi,
    I am working on SAP MII 11.5 and having trouble with SQL Query Template with Column List mode.
    It is throughing an error "Enter a table Name.
    Please help me in this regard

    You will need to use the Group parameter with the table name.
    <PARAM NAME="Group" VALUE="Employees">
    You can also set it with javascript for interactive use that would emulate the Template Editor:
    document.APPLET.getQueryObject().setGroup("Employees");

  • Apply Retiming Behavior to Effect Source

    Hello community!
    I'm trying to build a Motion Effect that I can use in FCPX.
    The effect should mimic a stop motion feeling. To start off, I would like to apply a Strobe Behavior. (Library>Behaviors>Retiming>Strobe)
    This is where I run into my first problem. I assume, that I need to apply the behavior to the Effect Source, but no matter how I try dragging and dropping, hitting the Apply button, and holding down Modifyer keys, the behavior doesn't stick to the Effect Source.
    Am I missing a basic conceptual thing here?
    Thanks in advance!
    Manfred

    OK - I think this will work for you:
    You will need to Clone the source.
    Add a Strobe filter to the clone and publish the Strobe Rate.
    Replicate the Clone.
    Publish Source Start Frame
    Publish Hold Frames and Hold Frames Randomness and the Random Seed button
    How to make it work in FCPX:
    Set Strobe Rate to about 10 (to start)
    Set Hold Frames to about 10
    Set Hold Frames Randomness to 13 or so
    You will need to keyframe the Source Start Frame from 0 to some value that will finish the clip by the last frame. So, Keyframe Source Start Frame to 0 at the first frame then go to the last frame (type down arrow then left arrow to back up one frame) and drag the value until the last frame of the clip shows (otherwise the clip will fall short or if you go too far, it will partially loop -- which may be what  you want for some clips!)
    Play... (seems to me to work very well.)
    You may not need Hold Frames if Strobe Rate is enough.

  • How to use custom aspx page as template for custom content type

    Hi,
    I have created custom content type and custom aspx page. I want to use aspx page as template for custom content type.
    Can anybody please let me know how to accomplish this?
    Any help would be appreciated.
    Thank you,
    AA.

    Check if you are looking for the below
    http://www.sharepointpals.com/post/How-to-Create-a-Page-Layout-(PageLayout)-with-ContentType-in-SharePoint-2013
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • How to use a query in Web template

    Hello i have really a very silly question.
    How can i use a Query that is already defined by BEX into a Web template so that i can set up simple properties like changing colours of Row as well as avoid Tab pages.
    I logged into a Web template.
    Can any provide step by steps.
    Please help

    No questions is silly, doubt is always a doubt and clarifying the same is the best way to deal with that.
    Anyway philosophy apart and coming to business.
    1) created the query in Query designer, say Zquery1
    2) logon to WAD.
    3) for assigning Zquery1 to WAD template, you haev to decide how you are going to use Zquery1 in WAD.
    4) for ex: you want to display the query result and also a graph based on that result.
    5) So we have to drag drop Chart and table in WAD.
    6) create dataprovider and assign zquery1 to this dataprovider.
    7) save and execute.
    For chanding the colors, under properties, we will have many stylesheets delivered by SAP. Yiou can choose anyone on this which suits to your requirement. If not, then edit the stylesheet and code it as per your need.
    Hope this helps. If yes, please assgin points.
    Regards
    Pankaj

  • How to use the grow/shrink effect from the gallery

    I'm not interested in the entire gallery, however, the
    grow/shrink effect is very nice.
    I tried looking for it in dreamweaver....
    and then I tried grabbing gallery.js and spryeffects.js
    I get errors.....Has anyone extracted this particular
    behavior? There are a number of places it can be useful.
    Thanks,

    Oh, I think I have found something ot there, sorry if I was a little impatient...
    "3d fog only works with 2 different 3d image types and does not work with a AE 3d scene."
    And one of that 3d images is "RPF" or something like that, a file that contains some 3D or depth info as far as I can imagine... So... really there is no effect like this to simulate fog quickly & easily into a simple 3D After Effects composition? Cause it'd be very usefull... of course I can imagine several ways to "fake" it, but a simple effect for each 3D layer it'd be great to avoid complications... Well, anyway any imput or advice it'll be very welcomed, CHEERS!

  • How to use Report Parameter  on Data Template

    Hello All ,
    I 've tried to create a Report using Data template and Report Parameter. I create a report using data template and I also created a parameter (P_company_name).
    Data Template :
    <dataTemplate name="test_Data_template" description="test" dataSourceRef="test">
    <parameters>
    <parameter name="company_name" dataType="character" include_in_output="false" defaultValue= *** HOW TO DEFINE THE REPORT PARAMETER (P_Company_name) HERE ** />
    </parameters>
    <dataQuery><sqlStatement name="Q1"> <![CDATA[SELECT customer_no,Company_name, from customers where acquisition_id = :company_name  ]]>
    </sqlStatement>
    Report Parameter
    Identifier : P_Company_name
    Data Type : String
    Default Value : Test
    Parameter Type : Text
    When the endusers run the Report they will provide the Company name through the report parameter.
    I have tried to use the same approach that I used to pass the Parameter to SqlQuery on data Template but it is not working . XML Publisher cannot define the parameter.
    How can I do that ?
    If you have any suggestion or document I will really appreciate.
    Thanks,
    Robson

    use this <parameter name="P_Company_name" dataType="character" include_in_output="false" defaultValue= 'Test Value' />and in the querySELECT customer_no,Company_name, from customers where acquisition_id = :P_Company_namehttp://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12187/T421739T434255.htm
    Just keep the parameter name in datatemplate and the definition same.

  • How to use special characters in rtf template?

    Hi,
    We are using .rtf template to print an invoice in pdf format.
    Now the requirement to put special character under footer section as below.
    "New York • London • Houston • Berlin • Vienna • Sydney • São Paulo • Singapore "
    I use same in rtf template but report output showing as below
    "New York ? London ? Houston ? Berlin ? Vienna ? Sydney ? São Paulo ? Singapore " .
    I tried with placeholder column but no luck.
    Can anyone help me?
    Thanks in advance!!

    hi,
    find in this link
    Count Number of Groups

  • How to use the 3D Fog Effect

    ...Hello again! It seemed easy, but In a composition with a Camera I have tried to apply the "3D Fog" * effect in several ways, that is, in Adjustment Layers in different timeline positions and depth, in each 3D layer separated in Z depth it selfs, and all that playing with all the parameters too getting no results and any change over that layers, so... or I'm missundertanding something or maybe this kind of effects requires something more... Well, the case is I've been looking for info but the manual only explains the parameters and not how to apply it... I've searching into the forum and I've make some Google searchs with millions of results but no consistent solutions until now... any help?
    * http://livedocs.adobe.com/en_US/AfterEffects/8.0/help.html?content=WS3878526689cb91655866 c1103a9d3c597-7bd4.html

    Oh, I think I have found something ot there, sorry if I was a little impatient...
    "3d fog only works with 2 different 3d image types and does not work with a AE 3d scene."
    And one of that 3d images is "RPF" or something like that, a file that contains some 3D or depth info as far as I can imagine... So... really there is no effect like this to simulate fog quickly & easily into a simple 3D After Effects composition? Cause it'd be very usefull... of course I can imagine several ways to "fake" it, but a simple effect for each 3D layer it'd be great to avoid complications... Well, anyway any imput or advice it'll be very welcomed, CHEERS!

  • How to use TH1 Custom Guitar Effect Suite with Garageband?

    I'm a newbie at home recording so bear with me.
    I just downloaded the TH1 Triode VST demo but can't figure out how to make it work with my Garageband software?
    Any suggestions where to start?
    Should I have downloaded the Stand alone version instead?
    Any help would be much appreciated.
    Cheers!

    Bingo! That was the trick!
    Now, second question.
    If I want to buy the full version, do I purchase the the TH1 Triode AU version or would I need the TH1 1.1.4 AU Mac version? It says the TH1 1.1.4 AU is Mac OS X 10.6 Snow Leopard compatible. But I'm on the 10.5.8 system. I guess my question is whether the TH1 1.1.4 is the latest version that works with 10.5.8 or is it only compatible with 10.6 or later? And by "Triode" do they mean "Try" ? LOL!!!
    I know it sounds dumb but I really haven't got a clue which one to go for on my system.

  • How to use a single jsp as template

    hi I have a jsp with a layout. it means the jsp has menu on the left and header on the top. now for every different call the center part of the jsp should change. Is this possible?
    I mean for every different call a different jsp should be included in the center of the layout jsp. If this is possible it will be of so much help. kindly help?

    Case 1:
    u have only fenum and fetxt to load
    then create the datasource with both the fiels and load data
    Case 2: you other fields as the attributes of fenum and you have fetxt
    Sol1:
    then create one datasource for fenum + attributes
    2nd datasource for fenum + fetxt
    Sol2: create one datasource with fenum + attributes + fetxt
    the reason we have seperate datasource for text is that the descriptions of the field fenum may not be so frequent as the master data change, depending on the scenario it could be vice versa also.
    Regards,
    BWer
    Please assign points if it is helpful.

Maybe you are looking for