How to use room finder for meetings less than 30 minutes
Hi,
I'm currently investigating the use of the room finder option in Outlook 2010 (with Exchange 2010 as backend, on-premise).
However, we would like to use it to schedule meetings less than 30 minutes, but that doesn't seem to work.
The message "Suggestions are not provided for meetings with a duration of less than 30 minutes" appears in the suggested times box.
Is there a setting somewhere on the client or server that we can adjust to allow to use the room finder for meetings of 15 minutes?
Thanks a lot,
Michiel Peene.
Hi All,
Is this really the end of it? It's by design?
What I have noticed however is that it's not a problem with the meeting being less than 30 minutes, it's a problem with a meeting starting on a 15 minute or 45 minute mark of the hour. Even if the meeting is
scheduled for 1 hour, as long as the start time is X:15 or X:45, room finder will not display any suggestions.
One can schedule the meeting starting at quarter past or quarter too, the room finder will just not make any suggestions for a room. So what I have done and suggested to the PAs in the business to do, is to
find a room by starting off scheduling it to start on the hour. Then when you find a room that is available for that hour, select the room, then change the start time. If you want the meeting to be for less than an hour (say 45 mins) don't forget to change
the end time respectively. It automatically defaults the end time to either 60 mins or 30 mins after the start time.
[EDIT] - I have actually discovered that the start time can be anything other than on the hour or on the half hour and the problem/issue presents itself.
Is there a setting that perhaps can be configured with PowerShell that allows the room finder to see availability of rooms for the 15 minutes past and 15 minutes too the hour, and therefore suggest rooms?
I wonder if it is not something to do with the Availability service (Free/Busy service) configuration, anyone know what is configurable on the Availability service and how to configure it?
Did you ever find a solution to this ?
It's now 2014 and it would still be helpful to know whether there's a way to fix Room Finder's apparent incompatibility with non-X:00/X:30 meeting times!
Similar Messages
-
How to use custom calendar for scheduling other than owb's default calendar
Hi All,
Can anyone please tell me, is there any possibility of using a custom calendar in place of owb default calendar calendar during scheduling. Because, in my case, the month start date and end date are not 1st and 31st that changes according to the financial calendar that is defined.
I want to schedule mappings on month end date of financial calendar. How can this be done?
Thanks in advance
JoshnaHi,
The only possibility is to configure more than one schedule using the complex by month, by_ configuration. I don't know if this will work for you. Or you must use another job control system.
Can u just brief how to use it. Any other possible way of achieving my task?
Thanks
Joshna -
i want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged
pls give braef intro about all this things, i have searched on sites but i am not getting exact thing and meaning pls help
and i wnat to complete hardware exam of mac what should i do
thanks
vicckeyGSX, if you're referring to Apple's service by that name, is available only to employees of Apple-authorized service providers or self-servicing accounts. Unless you are employed by such an organization, you cannot access GSX. If you are employed by such an organization, they should set you up and give you the appropriate login information.
If you are interested in becoming a certified Apple hardware technician, you can find information here:
http://training.apple.com/certification/acmt
Please note, though, that certification does not in and of itself give you access to any of the Apple resouces for support organizations; diagnostic tools, parts ordering, etc. You again must be employed by an authorized Apple support provider before you can gain such access.
I have no idea what "knowlaged" might be.
Regards. -
How I use 802 small for HP 1050 J410
how I use 802 small for HP 1050 J410
Hi debesh,
Welcome to the HP Forums!
To replace your ink cartridges in the HP Deskjet 1510, please see this guide, Replacing the Cartridges for HP Deskjet 1510, Deskjet 2540, Deskjet Ink Advantage 1510, and Deskjet ....
For future reference, here is your printer's user guide as well. HP Deskjet 1510 All-in-One Printer User guides.
Hope this is what you were looking for, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Hi Any body Knows How to use CAT Tool for Up Loading?
Hi
If any body knows how to use CAT Tool for up loading transactions, explain the steps.
Our requirement is, we want to up load transactions like Oppor , Quotation,Order etc...we want to up load these transcations from Local system to CRM Server
how to do this? Let me know the steps.
Regards
VenkatIf you have 10,000 or less, CATT is a reasonable method, but I would suspect that you have far more than that if you're needing to load transactions.
LSMW is probably a better way to go if you have more than 10k, but I am not familiar with LSMW -
How to use time capsule for wireless back-up but not internet?
Hello,
I have a tower and recently a laptop at work. The tower is connected to our local network with an ethernet cable and the laptop with wireless. So, the internet connection is fine for both.
I was hoping to use my time capsule to do time machine backups on my laptop. Do you have any advice on how to configure this? I do not want to use the time capsule to extend my Internet, as I believe my work I.T. would prefer to handle all access to their network.
Perhaps there is some documentation about doing this that you could point me to? I have not been able to find it.
Thank you for your help.Your original question was How to use Time Capsule for wireless back-up but not Internet?
There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
Yes, it appears to work without plugging into my tower.
Correct, it will work.
I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
As I stated, that is the downside to trying to back up without an Internet connection. You have to establish another network...and backup over that network.
If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible. -
Can anyone tell me how to use the "find my ipod" app that I have for my ipod? I have the ipod registered on my itunes account but I can get the serial # to send it in for apple support? How does this feature work? Thanks
Turn on your computer.
Open your Browser.
Go to icloud.com
Select find my iphone/ipod -
How to use Synth LookAndFeel for scrollbar?
Hello there,
I read many articles on Synth ookAndFeel but in any article I could not find how to use Synth LookAndFeel for ScrollBar.
How can use SynthLookAndFeel without using any extra LookAndFeelHi,
what u do is this:
<style id="button">
<state value="DEFAULT">
<imagePainter path="Synth/testdown.png" sourceInsets="6 6 6 6" paintCenter="false" stretch="true"/>
<color value="#3333FF" type="TEXT_FOREGROUND"/>
</state>
<state value="SELECTED">
<imagePainter path="Synth/test.png" sourceInsets="6 6 6 6" paintCenter="false" stretch="true"/>
<color value="#0000FF" type="TEXT_FOREGROUND"/>
</state>
<state value="PRESSED">
<color value="#0000FF" type="TEXT_FOREGROUND"/>
<imagePainter path="Synth/test.png" sourceInsets="6 6 6 6" paintCenter="true" stretch="true"/>
</state>
</style>
<bind style="button" type="region" key="BUTTON"/>the <bind> element applys the style 2 the object (JButton). It's actually a region, u can get all the regions at
http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/plaf/synth/Region.html
good luck!
DirectXMan
P.S. If u find more sites on Synth please post them. -
How to use Batch operation for two xsodata services?
Hi All,
I have two xsodata services. How to use submit batch for two xsodata services
Thanks,
MjGateway Batch Calls from SAPUI5
-
How to use same actions for differ pop-up
Hi gurus,
I am using 2 popup in a view.same popup's having same buttons 'Yes', 'No'.when i use 1st one i have to create an action for that Yes button where i put my code for that particular Action.
But when i used 2nd one the action define for that is not acceptable with differ name.it takes only standard one.
Now my Query is : How to use same actions for differ pop-up buttons with in a similar view?Where i put my code.
Plz sugges me.
<b>Points will be sured.</b>
Sanket sethiHi,
Take one integer value attribute in the context of view
when you r performing action on POP1 set it's value to 1
when you r performing action on POP2 set it's value to 2
create one method which receives integer argument, say diaplay(int a)
In the action call display(wdContext.currentContextElement().get<intvariable>()) by passing the value in the context attribute
in display() method, Check the value of integer variable..
if it is 1 then perform action related to POP1
if it is 2 then perform action related to POP2
Regards
LakshmiNarayana -
How to use same actions for differ pop-up buttons
Hi gurus,
I am using 2 popup in a view.same popup's having same buttons 'Yes', 'No'.when i use 1st one i have to create an action for that Yes button where i put my code for that particular Action.
But when i used 2nd one the action define for that is not acceptable with differ name.it takes only standard one.
Now my Query is : How to use same actions for differ pop-up buttons with in a similar view?Where i put my code.
Plz sugges me.
<b>Points will be sured.</b>
Sanket sethiHi ,
u can use the method SUBSCRIBE_TO_BUTTON_EVENT of the IF_WD_WINDOW interface ... to handle the event fired by the popup .....used this method after creating the popup window ...
regards
Yash -
How to Use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA
Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
ct_data-ta_guid = '000000000000000001'.
ct_data-equipment_ext = wa_itab-equipment_ext.
ct_data-descript = wa_itab-descript .
ct_data-valid_date = sy-datum.
ct_data-equicatgry = 'M'.
APPEND ct_data.
CLEAR ct_data.
ct_datax-ta_guid = '000000000000000001'.
ct_datax-equipment_ext = 'X'.
ct_datax-equipment = 'X'.
APPEND ct_datax.
CLEAR ct_datax.
it_descript-ta_guid = '000000000000000001'.
it_descript-text_language = wa_itab-text_language.
it_descript-descript = wa_itab-sdescript .
APPEND it_descript.
CLEAR it_descript.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'LTXT'.
it_longtext-text_line = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'aaaaaaaaaaaaaaa'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'bbbbbbbbbbbb'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'cccccccccccccccc'.
APPEND it_longtext.
CLEAR it_longtext.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
TABLES
ct_data = ct_data
ct_datax = ct_datax
it_descript = it_descript
it_longtext = it_longtext
return = return
EXCEPTIONS
OTHERS = 1.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE : 'Successful'.
ENDIF.
IF NOT return IS INITIAL.
LOOP AT return.
IF return-type = 'A' OR return-type = 'E'.
WRITE : 'Error'.
ENDIF.
ENDLOOP.
ENDIF.
REFRESH return.
ENDLOOP.
Regards
SUrendarHi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
ct_data-ta_guid = '000000000000000001'.
ct_data-equipment_ext = wa_itab-equipment_ext.
ct_data-descript = wa_itab-descript .
ct_data-valid_date = sy-datum.
ct_data-equicatgry = 'M'.
APPEND ct_data.
CLEAR ct_data.
ct_datax-ta_guid = '000000000000000001'.
ct_datax-equipment_ext = 'X'.
ct_datax-equipment = 'X'.
APPEND ct_datax.
CLEAR ct_datax.
it_descript-ta_guid = '000000000000000001'.
it_descript-text_language = wa_itab-text_language.
it_descript-descript = wa_itab-sdescript .
APPEND it_descript.
CLEAR it_descript.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'LTXT'.
it_longtext-text_line = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'aaaaaaaaaaaaaaa'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'bbbbbbbbbbbb'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'cccccccccccccccc'.
APPEND it_longtext.
CLEAR it_longtext.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
TABLES
ct_data = ct_data
ct_datax = ct_datax
it_descript = it_descript
it_longtext = it_longtext
return = return
EXCEPTIONS
OTHERS = 1.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE : 'Successful'.
ENDIF.
IF NOT return IS INITIAL.
LOOP AT return.
IF return-type = 'A' OR return-type = 'E'.
WRITE : 'Error'.
ENDIF.
ENDLOOP.
ENDIF.
REFRESH return.
ENDLOOP.
Regards
SUrendar -
How to use Web Serivce for not jsr 172 phone
Hi:
Is anyone know, how to use web service for phones that only have standard J2ME package installed (without jsr 172 web service packagenstalled)?
thank youHi,
I think you need to write the code for this from scratch (built on top of existing HTTP functionality). There may be open-source J2ME code you could use. I've never tried this so I'm afraid I don't know any more. But maybe that is what you were asking... i.e. does anyone have code that does this already...
Tx,
Sam -
How to use 2 GL for loss made on asset retirement w/o revenue ?
how to use 2 GL for loss made on asset retirement w/o revenue.
hello everyone
i have some trouble.
my company want to use 2 GL account for asset retirement
example some time use GL 6500001 some time use 6500002
in standard configuration AO90 , field loss made on asset retirement w/o revenue, there is only one field.
so i can use only one G/L.
it' s not good if i must to change configuration (and transport request )every time that user need to change GL.
now i got one idea.
i know that table T095 keep account determinaton and GL account data.
so if i make program that change data from table T095 directly. i donot need to change config everytime.
but i am not sure that this way will make impact other standard program or not.
i will wait for better idea from everyone.
please help.Substitution consist of several steps each with two parts:
1- Prerequisite
2- Replacement
If the prerequisite is satisfied (TRUE), substitution (Replacement) is performed.
Transaction Code: OBBH.
Thank you
Javed -
Explain how to use standard LSMW for MM01
Can anyone explain how to use standard LSMW for MM01 Tcode.pls explain briefly.
Hi
Create a project using 0020 as method.
Max
Maybe you are looking for
-
How do I install Lightroom onto my new computer after old computer crashes?
My old computer recently crashed and I just got a new one (MacBook Pro). I had Lightroom 3 on that computer and I need to get it back onto my new computer. I have the original disc, but my new computer doesn't have a disc drive! How can I do this??
-
my problem is that since I update my iphone 4s ios 8 and then restore it and when I connect to itunes does not sync my music only applications
-
Process for vendor advance paymnet
Hi, We required the process , as per vendor payment term if the payment is advance when we create the PO a adavance payment request should get generated, so is there any std. procedure for this also how we can post the adavcne paymnet ref. to pu
-
Safari toolbar button does not show popover or menu
I created an extension for safari In an extension there is a button and when i click a button a popover should appear but when i click a button nothing happens i have done all like in the instruction
-
Suddenly unable to view project for no apparent reason.
Hello All, I've been working on a short documentary. Everything has been going along swimmingly. I left the project to partipate in a conference call. When I came back, and press play to see where I had left off, the picture (edits, dissolves, graphi