How to use routing service property value in xsl

Hi All,
I need to use routing service's property value in xsl.
I created routing service in esb project. after routing rules, thare is properties. In properties I added name as "propval" and value as "required".
I need to use value of propval in one of our xsl.
Can you please suggest on this.
I am using soa suite 10.1.3.4.0
Thanks in advance.
Edited by: vikky123 on May 2, 2010 1:36 AM

Hi All,
Right now i wud be starting working on BPEL in my project.
I wud be working on XSLT in BPEL.
I started from the basic things i.e the tutorial given on,
http://www.oracle.com/technology/pub/articles/matjaz_bpel1.html
But i was not getting which software to download from the link given below, for working on XSLT.I am a Java developer by profession and windows would be the operating system for that,
http://www.oracle.com/technology/software/products/ias/bpel/index.html
Kindly let me know, from where to start to get the basics right.
Additional to it, whether i need to undergo the training for it.
I got a course material for learning BPEL from a coaching institute site.Kindly view it....
http://soatraining.hpage.com/oracle_soa_bpel_esb_training_82839535.html
Wud it be sufficient...I mean wud i be able to learn it from internet without taking options of coaching.
Kindly help me out.
Thanks&Regards
Sanket
Edited by: user13096574 on May 9, 2010 9:55 PM

Similar Messages

How to get Document Set property values in a SharePoint library in to a CSV file using Powershell

Hi,
How to get Document Set property values in a SharePoint library into a CSV file using Powershell?
Any help would be greatly appreciated.
Thank you.
AA.

Hi,
According to your description, my understanding is that you want to you want to get document set property value in a SharePoint library and then export into a CSV file using PowerShell.
I suggest you can get the document sets properties like the PowerShell Command below:
[system.reflection.assembly]::loadwithpartialname("microsoft.sharepoint")
$siteurl="http://sp2013sps/sites/test"
$listname="Documents"
$mysite=new-object microsoft.sharepoint.spsite($siteurl)
$myweb=$mysite.openweb()
$list=$myweb.lists[$listname]
foreach($item in $list.items)
if($item.contenttype.name -eq "Document Set")
if($item.folder.itemcount -eq 0)
write-host $item.title
Then you can use Export-Csv PowerShell Command to export to a CSV file.
More information:
Powershell for document sets
How to export data to CSV in PowerShell?
Using the Export-Csv Cmdlet
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How can we include the property value into the News RSS?

We have defined object property u201CDepartmentu201D that is used in News XML creating form. How can we include the property value into the News RSS (set value of the particular RSS XML tag)?

We have solved the issue with NWDS

How to use Web services in BI 7?

HI all,
Can anyone pls let me know how to use Web services in BI
Thanks
Pooja

http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/2d/64d029e74911d6b2e400508b6b8a93/content.htm

How to use web services in Excelsius 2008

I am new to this tool. I have trial version on excelsius 2008 and i would like to build a dashboard that should query our corporate database (in oracle). I think web services is a option to do it. Any samples available?.Please help me
Edited by: AshishDatar on Jul 27, 2009 6:29 PM

Hi AshishDatar:
For you question you want to get data from data base using web service connection. Here I can give you some suggestions
1.Write a web service to retrieve data from data base, then use Xcelsius u201Cweb service connectionu201D under u201CManage Connectionu201D section to consume the service and get the data from data base to spread sheet.
2.Xcelsius also provide you a tool to generate web service with easy way (without coding). (Suggested)
Using flynet, you can get flynet installation file under Xcelsius installation folder u201CXcelsius\Connectivity\Flynet Webservice Generatoru201D for more information about flynet please refer to
http://myxcelsius.com/2008/11/07/generating-web-services-for-xcelsius-using-flynet-web-service-generator/
Here is also a demo on how to use web service conneciton with Xcelsius + Flynet
https://businessobjects.webex.com/ec0600l/eventcenter/enroll/register.do?siteurl=businessobjects&formId=50213992&confId=50213992&formType=1&loadFlag=1&eventType=1&accessType=
Hope it helps with your work! And let me know if you need any further help.
Thanks!
Bill
Edited by: Bill Xu on Jul 28, 2009 8:02 AM

How do I change the property value priceInfo.amount?

How do I change the property value priceInfo.amount?
After changing the quantity field in the shopping cart and submit the form, I need to convert the field value priceInfo.amount and then set it again.
How do I?
Thank´s.

Why do you need to convert this value and set it again?

How i use Enterprise Services?

Hello @ll experts,
i hope that is the right Forum-Category.
I don't find any description, how is use Enterprise Services with SAP PI for my IT-Scenario.
Actual situation:
I import the XI-Content (there is the Service Interface to use for the ES) in the Enterprise Service Repository (SAP PI 7.1), copied the Service Interfaces and all dependence Objects in my own Software-Compoment.
My Question:
What i should doing to config in my sap ERP ECC 6.0 with the Enterprise Service to connect with SAP PI 7.1?
Maybe ABAP-Proxies?
Thanks in Advance,
best regards
armin

Hello,
Once you build Service Interface in PI, you need to generate PROXY in back end ERP system using SPROXY. After that you need to implement the Proxy Class Method by writing glue code using SE80. Now, you may setup End Point using SOAMANAGER. Please see the link for details: [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60cb2b4c-af72-2b10-a3a2-a2f718d2a565]
Thanks,
Venu

How to use web service consumer as a source to connect to Salesforce?

I see a lot of articles and mapping xmls on how to use web service consumer but as a newbie I am not able to view the object schema from my salesforce enterprise WSDL after importing it in Informatica designer as a source. My enterprise wsdl has operations like create, retrieve, upsert, delete etc so if I want to read data from account then could someone guide me on how to use the web service consumer to view the fields after importing the wsdl. After importing the wsdl and selecting the operation say create, the columns (ports) displayed shows different groups but it doesn't list the object fields? what am I missing here? And what is the operation to read data from Salesforce is it "retrieve" from the entripse wsdl? As a newbie on this, I appreciate any inputs on this topic.

Magazinweg 7Taucherstraße 10Taucherstraße 10Av. Copacabana, 267Strada Provinciale 124Fauntleroy CircusAv. dos Lusíadas, 23Rua da Panificadora, 12Av. Inês de Castro, 414Avda. Azteca 123 I have the source table like this and i want to replace the character and sum up the numbers and how can i do it, I replace the character by reg_replace() function but I am not able to add the number because it is of not fixed length. My Output should be,71115705396

How to use Enterprises Services Bundles In PI Services Registry

Hi All,
i need information regarding How to use Enterprises Services Bundles In PI Services Registry.
please provide some information. please help me..
regards,
jas
Edited by: jasmines123456789 on Nov 10, 2009 2:42 PM

Hi,
Enterprise Services (ES) bundles are collections of enterprise services, grouped by common business scenarios, which enable customers, partners and independent software developers to extend the functionality of the SAP Business Suite.ES bundles help create composite applications using SAP NetWeaver's enterprise services development and modeling tools. In this way, SAP is promoting an evolutionary path to SOA and lowering barriers to overall SOA adoption.
SAP providing bundles of enterprises for evry industry,if you want to use any enterprise services then you have to read teh documentation for the servcies and how this service can help you to reuse,if you want to provided any extension for the same you can.
All enterprise services stored in Service Registry,first you have to consume the services fromService Regsitry.Service Registry is the place holders where servies available.
refer below link how to use Enterprise Service BundleS
https://wiki.sdn.sap.com/wiki/display/ESpackages/Opportunity+Management
Regards,
Raj

How to use "Routing Table" option in Proxy service in OSB ?

Hi,
I have created Business and Proxy services in my OSB console. I have used "Custom Query" option while creating the Database Adapter and I'm passing one input parameter to the query. My input parameter is "Name".
Based on the input values for this parameter, I need to pass a corresponding values to the query. For example, If I pass the following values to "Name" input parameter (India) I need to pass "Value1" to my query -
India --> Value1
China --> Value2
America --> Value3
To achieve this requirement, I have used "Routing Table" option. I have specified the values as follows -
Expression - $body/fet:FetchCustDataInput/fet:Name
Operator- '='
Compare value - India
Service - "My Webservice"
Operaton- "My Service Operation"
In the "Request Actions:" I have added the "Add an Action --> Messaging Processing --> Replace" and provided the following values -
Replace <XPath> = $body/fet:FetchCustDataInput/fet:Name
in Variable = "Name"
with Expression = xs:string('Value1')
and selected "Replace node contents" option.
No validation errors I faced. I have created the Routing table in Proxy service. But when I try to execute the proxy service in my Test Console, I get the following error message -
"The invocation resulted in an error: Unknown error while processing message for service ProxyService OSBQueryService/FetchByCustomQuery/FetchByCustomQueryPS."
I have even enabled "Direct call" and "Include Tracing" options as well. The message under "Tracing" give "(echoing request)
Routed Service. No Service has been invoked, the request is echoed.".
Can anyone please help me to resolve this issue.
Thanks in Advance,
Udaya

Did you put any loggers in the proxy at request pipeline prior to route node ? Can you trace if the request has entered request pipeline aleast.
If not just check the transport headers under the request window in the test console. There should be a text box for entering username/password which should be left blank. I have faced this unknown exception from test console in some browsers where an incorrect username/password used to get populated here. Check this ..
Edited by: atheek1 on Jul 22, 2010 2:02 AM

How to use/read a property in a WSDL file?

Hello list,
Does anybody know how to use a property (e.g. myapp.host.name) in a WSDL file to dynamically switch between a certain host through the use of a property file?
My property file would look like this:
myapp.host.name=<some-ip-address-or-dns>
myapp.host.port=1234
I would save this property file as myapp.properties.
In a WSDL file that I receive from a 3rd-party I want to remove the hardcoded hostname and replace it with my property. For instance, something like this:
<port binding="tns:DoSomething" name="DoSomething">
<soap address location="http://abcdks02:1234/avb_xsd/start.edw?MySource=WebService></soap:address>
</port>{code}
should be replaced by this:
{code}<port binding="tns:DoSomething" name="DoSomething">
<soap address location="http://${myapp.host.name}:${myapp.host.port}/avb_xsd/start.edw?MySource=WebService></soap:address>
</port>Is there a fast, efficient and clean way to do this? I do not want to use maven2 filtering, because that forces a new re-deployment every time you change the value of the property. I also want to avoid Spring, because we're trying to get rid of Spring in our project.
What else can I use? I am sure there is a fast and efficient way to do this.
Any help is appreciated!
Thanks,
Gian

Hi biblio,
I have used the method you have mentioned to change the target end point. And that was successful. Thank you. Apart from this I have another issue. I want my web service read some database related values from properties file only when the web service is deployed. Currently the java application read the database related values in a static block. I have made this java application to a web service. I am new to java and thought of there may be something like ServletContextListener where I can read properties file. This allows me to read properties file only when the web application is deployed.

How to use viewslifetime managed property to get the list of sites which are least accessed?

Hi,<o:p></o:p>
I am trying to get the subsites of a site collection which are least accessed. I am using ViewsLifeTime managed property in a content search web part with a condition like this:
ViewsLifeTime < 0
OR
ViewsLifeTime = 0.
However, It is not giving any results. I even tried with ViewsLifeTime < 10. I have some subsites which are accessed less than 10 times. I came to know this when I saw the value of ViewsLifeTime
property.
Can anyone suggest how to add a condition on ViewsLifeTime property?
Thanks in advance.

Hi Mohan,
Here is a thread with similar issue for your reference:
http://social.technet.microsoft.com/Forums/en-US/770f100d-eadb-45d1-9305-15f11cf9038d/ctxcurrentitemviewslifetime-is-showing-null?forum=sharepointsearch
If you would like to get site usage report in SharePoint 2013, there is OOTB feature for you to view popular trends report for a site, you could refer to the link below:
http://blogs.technet.com/b/tothesharepoint/archive/2014/01/28/view-and-configure-usage-analytics-reports-in-sharepoint-server-2013.aspx
In addition, custom script for usage report for SharePoint sites might be more helpful to your requirement to know access times:
http://blog.falchionconsulting.com/index.php/tag/audit/
Regards,
Rebecca Tu
TechNet Community Support

How to get the 'text' property value of a button in coding?

Hi Experts,
I'm using 10 buttons all are having common action('click'). when i click a button the 'text' value of the button should pass to a function.So the action is same but the passed value will be the 'text' value of the corresponding button. I don't know how to get the 'text' property of a button in coding. Kindly help me to solve this problem.
Thanks and Regards
Basheer

Hi,
My event is like this.
public void onActionclick(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
     String s = ? ; // should get the 'text' property of clicked button
     fillInput(s);     // function to be called
The called function is,
public void fillInput( java.lang.String id )
    String str=wdContext.currentContextElement().getNum();
    str = str + id;
    wdContext.currentContextElement().setNum(str);
How can i get the 'text' property value of the corresponding button. Click action should be common to all buttons.
Thanks and Regards,
Basheer

How to get bean's property value ?

Hi all,
Hi I'm using JSF 1.2
How can I get and set session bean's property value in request bean action method ?

Inject the session scoped bean as managed property of the request scoped bean. You can do this in faces-config.xml as outlined here.

How to Use Mobile Service in HTML/JavaScript Application

The Windows Azure Mobile Service is a back end tool for mobile applications. It supports various platforms, such as Windows Store, Windows Phone 8, iOS and Android. The Windows Azure
Mobile service can also support HTML/JavaScript. This article helps you to get a basic idea of how to use the Windows Azure Mobile Service in HTML/JavaScript applications.
Let us start with a Quick startup project provided by Microsoft. A Quick startup is a simple demo project that can help us to understand how to use the Windows Azure Mobile Service with HTML/JavaScript. So let's start from the Quick startup project.
Login into in the Windows Azure portal and use the following procedure.
This article assumes you already have a Windows Azure account and the mobile service is enabled in your account.
1. Create a new Windows Azure Mobile Service
Click on the +New button from the left corner and select Compute -> Mobile Service and then click on the "Create" button.
The Windows Azure portal popup creates a mobile service wizard when you click the Create button. Windows Azure asks you to enter the mobile service name as shown in the following image:
Select the database options and region for your mobile service and click on the "Next" button.
Once your mobile service is successfully created, the portal will show all your mobile services as shown in the following images.
Ok! We have created a new mobile service successfully. Let's move to our subsequent steps.
1. Quick startup Project
As we all know, the Windows Azure Mobile Service can support many platforms such as Windows Store, Windows Phone 8, iOS, Android and HTML/JavaScript. This article only tells us about the new HTML/JavaScript platform that is recently added to the Windows Azure
Mobile Service.
In the image above, we are in the quick startup page where the Windows Azure Mobile Service allows the user to choose their platform. I have selected the HTML/JavaScript Platform.
In the image above, we found 3 quick steps that can allow us to run <g class="gr_ gr_74 gr-alert gr_gramm Grammar" data-gr-id="74" id="74">a HTML/JavaScript</g> sample project.
1. Create Table: In this step the user needs to create a table that can used by the sample project, once you hit the create TodoItem Table button. The Portal will create a TodoItem table in your mobile service. You
can check this table by clicking on the data tab(menu).
2. Download and run your app: In this step the user needs to download the Quick startup project that is provided by the Windows Azure portal. Click on the "Download" button and download the project. You will
see the following files in the quick startup project.
The Server folder contains some files to setup this project locally. The user should run the file from the server folder corresponding to their OS. I am using Windows OS so I ran the <g class="gr_ gr_80 gr-alert gr_spell ContextualSpelling ins-del multiReplace"
data-gr-id="80" id="80">lanch</g>-<g class="gr_ gr_79 gr-alert gr_spell ContextualSpelling ins-del multiReplace" data-gr-id="79" id="79">windwos</g> file to setup this project locally in
IISExpress.
Press r and enter the key, you will see IISExpress started. Do not close this Windows and open your browser and request the http://localhost:8000/ page.
Enter the Item name and click on the add button. Your Item will be added to the TodoItem table.
3. Configure your host name: This step is a very important step for any HTML/JavaScript application that uses the Windows Azure Mobile Service. In this <g class="gr_ gr_83 gr-alert gr_gramm Punctuation only-ins
replaceWithoutSep" data-gr-id="83" id="83">step</g> the user must register their website name in the Cross-origin resource sharing (CORS). By default, "localhost" is added by the Windows Azure Mobile Service
so your quick startup project can run without making any CORS setting changes. The user can add their website domain name by clicking on the configure tab (menu).
The user can add as many website domain names as needed.

are you asking a question or did you just post a tutorial here? you might want to post it as a blog post or wiki entry instead.

How to use routing service property value in xsl

Similar Messages

Maybe you are looking for