How to use "Routing Table" option in Proxy service in OSB ?

Hi,
I have created Business and Proxy services in my OSB console. I have used "Custom Query" option while creating the Database Adapter and I'm passing one input parameter to the query. My input parameter is "Name".
Based on the input values for this parameter, I need to pass a corresponding values to the query. For example, If I pass the following values to "Name" input parameter (India) I need to pass "Value1" to my query -
India --> Value1
China --> Value2
America --> Value3
To achieve this requirement, I have used "Routing Table" option. I have specified the values as follows -
Expression - $body/fet:FetchCustDataInput/fet:Name
Operator- '='
Compare value - India
Service - "My Webservice"
Operaton- "My Service Operation"
In the "Request Actions:" I have added the "Add an Action --> Messaging Processing --> Replace" and provided the following values -
Replace <XPath> = $body/fet:FetchCustDataInput/fet:Name
in Variable = "Name"
with Expression = xs:string('Value1')
and selected "Replace node contents" option.
No validation errors I faced. I have created the Routing table in Proxy service. But when I try to execute the proxy service in my Test Console, I get the following error message -
"The invocation resulted in an error: Unknown error while processing message for service ProxyService OSBQueryService/FetchByCustomQuery/FetchByCustomQueryPS."
I have even enabled "Direct call" and "Include Tracing" options as well. The message under "Tracing" give "(echoing request)
Routed Service. No Service has been invoked, the request is echoed.".
Can anyone please help me to resolve this issue.
Thanks in Advance,
Udaya

Did you put any loggers in the proxy at request pipeline prior to route node ? Can you trace if the request has entered request pipeline aleast.
If not just check the transport headers under the request window in the test console. There should be a text box for entering username/password which should be left blank. I have faced this unknown exception from test console in some browsers where an incorrect username/password used to get populated here. Check this ..
Edited by: atheek1 on Jul 22, 2010 2:02 AM

Similar Messages

Route the request from Proxy Service in OSB to external BusinessService URL

Hi,
How to route the request from Proxy service to the Business Service(Which is not registered in the OSB) using End point URL.Dynamically look up the URL and route the req from Proxy to Business service.
thanks in Advance
Edited by: user10680427 on Jul 14, 2009 2:57 AM
Edited by: user10680427 on Jul 14, 2009 3:34 AM

Hi..
Just set in within a routing options in a route node, either dynamic routing or just setting the uri, depends on your specific case..

Comment out actions in side proxy services in osb

Do any body know how to comment out certain actions in proxy service in OSB?
For eg: I have assign, insert, assign, ..route....
I want to comment out second assign but don't want to delete it, since i might need it later. Can I manipulate the generated code to comment?

What I meant is that I tried it with a very simple pipeline, a pipeline with one stage and one action. I added the comment tags around that action and it "disappeared" from my pipeline. Later I removed the comment tags and my action was there again.
But it could get complicated with a pipeline with many stages and actions (that's what I meant by complex). There could be dependencies between the actions (in one you create a variable that you use later in another action), etc.
I assume you're working directly on the web console. The files are stored in your server's file system but I really advise you against modifying these files directly.
With your installation of OSB you have an Eclipse (Workshop) with plug-ins for the OSB. You can export your project from the web console and import it into eclipse. You can work on eclipse and then publish your changes to the server.
There in eclipse you have your files in your file system and you can open them in your favourite text/xml editor. Or inside eclipse you can just right click on the proxy service and choose "open with -> text editor".

How to use multiple table in single control file?

Hi,
How to use multiple table and data file in sigle control file? I have a four table and four csv file i mean data file for that. I am running concurrent program to load the data from csv file to custom table. based on my input data file name, it has to take automatically from one control file.
Can anyone share with me how can i acheive this?
Thanks

Hi,
Can't we acehive like below. I don't this exactly corrcect.
OPTIONS (SKIP=1)
LOAD DATA
INFILE << file name 1 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE1
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
PARENT_ITEM "TRIM(BOTH FROM :PARENT_ITEM)"
LOAD DATA
INFILE << file name 2 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE2
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
ITEM_NUMBER "TRIM(BOTH FROM :ITEM_NUMBER)"
)Edited by: orasuriya on Sep 14, 2009 3:03 AM

How to use Temporary Table in PL-SQL

In MySQL there is no Temporary table concept.
So for intermediate calculation I have created a table as below
create table SequenceTempTable
SessionId VARCHAR(50),
Sequence VARCHAR(500),
CreatedDate DATE
) ENGINE=MEMORY;
Whenever I invoke a SP, I load the data into SequenceTempTable using Session Id as below
CREATE PROCEDURE `GetSequence`(
IN Start_Date VARCHAR(25),
IN End_Date VARCHAR(25)
BEGIN
SELECT UUID() INTO v_SessionId;
INSERT INTO SequenceTempTable values (v_SessionId,'1,2,5,3',now());
required code
DELETE FROM SequenceTempTable WHERE SessionId = v_SessionId;
COMMIT;
END;
i.e. I have created a table as temporary table (created once),
and load the data using Session Id and once session specific intermediate computation done,
I deleted the session specific data.
Could you give me examples of How to use Temporary table in PL-SQL code with respect to my above example.
Because I have gone through creating Temporary table but I stuck with use in PL-SQL. I mean to say Is there any need of creating table in advance before invoking SP.
And one more thing as in MySQL temp table I created which is using MEMORY engine i.e. this table will always be in MEMORY so there is no need of writing data on disk.
Regards
Sanjeev

Hi Sanjeev
Read about GTT here
http://www.oracle-base.com/articles/8i/TemporaryTables.php
GTT always contains just session specific data. \
In case you want to use the GTT in the same session again you can use option
ON COMMIT PRESERVE ROWS;
Or if it is used just once in the session use can use
ON COMMIT DELETE ROWS;
Do remember that for GTT the data of one session can not be accessed in other session.
Also you can go away with Delete from GTT if not used again in same session.
Regards
Arun

How to use the table maintenance events for validating the input entries..?

Hi,
I have created a Z table with 6 fields in which all are KEY fields. All are of CHAR type. I have created the Table Maintenance Generator for the same. While maintaining the entries in the table, even though I maintain a blank entry for a field it is saving the entry. But, I don't want that way. All the fields are mandatory in my table. One should enter all the fields. Otherwise it should not allow to save the entry. So, I think it can be done using the Table Maintenance Events. can someone tell me how to use the Table Maintenance Events. and which event to use for my reuqirement and what is the logic to be written.
Or Is there any other way to solve my problem.
Please share your inputs. Thanks in advance.
Best regards,
paddu.

In the table maintenance generator, Environment --> Modifications --> Events then a screen will be appear here,we need to create the Events.In the EVENTS screen, press new Entries, there give 01(Before Saving the Data in the Database) and give a name(This will become a PERFORM), then click the Editor pushbutton, this will be there at the right side of the entry, then a popup will be appear, you can create an include program, there inside of the include program write ur code.
Here is documentation for Event 01(Before Saving the Data in the Database )
Event 01: Before Saving the Data in the Database
Use
This event occurs before new, changed or deleted entries are written to the database. Other activities can be performed, for example:
hidden entry processing
fill hidden fields
flag data to be written to hidden tables after the database change.
To have the changes saved by the central maintenance dialog routines, SY-SUBRC must be set to 0 at the end of the routine.
Realization
This event has no standard routine. The following global data is available for the realization of the user routine:
internal table TOTAL
field symbols
field symbols <ACTION> and <ACTION_TEXT>
<STATUS>-UPD_FLAG
If internal table data are to be changed before saving, t he changes should be made in both the internal table TOTAL and in the internal table EXTRACT.
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM.
Regards,
Joy.

How to use the print option for photos?

How to use the print option for photos. I have a wireless printer but how do I set it up?

http://www.apple.com/support/iphone/assistant/airprint/

How to Use a table UI for input ?

Hi All ,
I just want to ask how to use a Table UI in webdynpro ABAP to insert , change and delete rows ?? and can we give a drop down facility in table columns ? . This is really urgent .
Thanks in advance.
Regards,
LAS

Hi LAS,
Everything is possible. I am providing the logic here which will help you a lot.
For insert, Change, Delete:
   Just get the all the elements into temp internal table and get the lead slected index. Now instrt one row in the lead selected index position. then again bind the temporary internal table to your table node. Thats all it works like inserting the row.
In the same way you can do the change and delete rows also.
For Dropdown:
Here i am providing the code for Dropdown. It will help you out.
Just create the Dropdown view for the columns for which you want dropdown. And do the coding for that.
Here in my scenario IT is the Table node which holds the information. And i am providing the dorpdown key for the column "BSCHL".
If you have any dobts just reply to me . i will respond it.
Code:
data : ls_outtab               type /kyk/s_fb01_line,
         lt_outtab               type table of /kyk/s_fb01_line,
         lv_node_sd              type ref to if_wd_context_node,
         lv_node_it              type ref to if_wd_context_node,
         lv_node_info            type ref to if_wd_context_node_info,
         lv_node_sapmf05a_0106   type ref to if_wd_context_node,
         lv_node_waers           type ref to if_wd_context_node,
         lv_node_layout          type ref to if_wd_context_node,
         lv_rowcount             type i,
         lv_buzei                type i,
         lv_waers        type waers,
         lt_bschl_set    type wdy_key_value_table,
         bschl_key_item type wdy_key_value.
bind to context
lv_node_sd      = wd_context->get_child_node( name = 'SD' ).
lv_node_it      = lv_node_sd->get_child_node( name = 'IT' ).
call method lv_node_it->bind_table
    EXPORTING
      new_items = lt_outtab.
fill Dropdown Help for posting Key
bschl_key_item-key    = '40'.
bschl_key_item-value = cl_wd_utilities=>get_otr_text_by_alias( '/KYK/FIN_FI/DEBIT_GL_ACCOUNT' ).
insert bschl_key_item into table lt_bschl_set.
bschl_key_item-key    = '50'.
bschl_key_item-value = cl_wd_utilities=>get_otr_text_by_alias( '/KYK/FIN_FI/CREDIT_GL_ACCOUNT' ).
insert bschl_key_item into table lt_bschl_set.
bschl_key_item-key    = '21'.
bschl_key_item-value = cl_wd_utilities=>get_otr_text_by_alias( '/KYK/FIN_FI/DEBITVENDOR' ).
insert bschl_key_item into table lt_bschl_set.
bschl_key_item-key    = '31'.
bschl_key_item-value = cl_wd_utilities=>get_otr_text_by_alias( '/KYK/FIN_FI/CREDITVENDOR' ).
insert bschl_key_item into table lt_bschl_set.
lv_node_info = lv_node_it->get_node_info( ).
lv_node_info->set_attribute_value_set( name = 'BSCHL' value_set = lt_bschl_set ).
Warm Regards,
Vijay

How to use drill down option in Crystal Report

Dear all,
I want to know how to use drill down option in Crystal report 2008. In below i have explained my screnario
For example
My scenario is. In crystal report I have Purchase order like PO101,PO102. Each purchase order have 5 line items. If i drill down each purchase order it should display line item in crystal report.
Regards,
Baskaran.

hi,
Create a Group on 'Purchase order'.
Group Expert -> Select the Purchase Order and Click the arrow button such that it appears right side. Click ok.
GH1 is inserted.
Your detail section should include 'Line items' fields.
Right Click 'Detail' section on left hand side, Click 'Hide (Drill down Ok)'.
Now you will see only 'Purchase order's in Group Headers.
Now when you click on a particular order, you will see respective line items.
Regards,
Vamsee

How to use error table in mapping level?

Hi all
Any one please tell me how to use error table in mapping level or how to handle the errors in mapping.
I am creating one error table in oracle but i dont know how to use it in mapping.
Thanks in advance.
Kumar

Hi Kumar,
You need to use Error Table along with the Data Rule .
Error tables are used with Logical error handlers (Data Rules). Detailed description on using data rules is explained in the following document
http://www.oracle.com/technology/products/warehouse/pdf/OWB10gR2_ETLandBusinessRules.pdf
In a nut shell usage of error tables is as follows.
1. Create a data rule associate it with a table (Target table or table in which you load data).
2. Use the table in a mapping as target table.
3. Deploy the table and mapping.
Now in the target schema one more table will be created with the name <target table name>_ERR. When a mapping is executed the data which violates the data rule gets into this error table.
The following has to be done to have error table name of customers choice.
1. Right click on the table and click configure.
2. Give the table name in "shadow table name" section.
3. Deploy the table.
4. Use this table in a mapping. Now in the mapping on this table properties in "Error Table Name" section the name of the table specified in "shadow table name" will be populated.
Thanks,
Sutirtha

How to use dual table in ODI in source side for nested queries?

Hi,
Any idea how to use dual table in source for more than once. I want to build a ODI interface for the following source query
SELECT ACTV_TYP.ACTV_TYP_SRC_CD, ACTV_TYP.ACTV_TYP, PORT_ACTV_TYP.PORT_ACTV_TYP_SRC_CD, PORT_ACTV_TYP.PORT_ACTV_TYP, SFT_DLT_STS.SFT_DLT_STS_SRC_CD, SFT_DLT_STS.SFT_DLT_STS
FROM
SELECT LOW_VALUE PORT_ACTV_TYP_SRC_CD, MEANING PORT_ACTV_TYP
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BRKR_PORTS'
AND COLUMN_NAME = 'WORK_PORT_TYPE') PORT_ACTV_TYP,
(SELECT LOW_VALUE SFT_DLT_STS_SRC_CD, MEANING SFT_DLT_STS
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BANKS'
AND COLUMN_NAME = 'REC_STATUS') SFT_DLT_STS,
(SELECT 1 ACTV_TYP_SRC_CD, '?????' ACTV_TYP FROM DUAL
UNION ALL
SELECT 2 ACTV_TYP_SRC_CD, '???????' ACTV_TYP FROM DUAL) ACTV_TYP
Regards

If the below query is equivalent , it seems you don't need dual table at all , just default the values in the interface.
You are using dual tables to populate values ACTV_TYP.ACTV_TYP_SRC_CD, ACTV_TYP.ACTV_TYP values. Look at your query in the following manner :
SELECT '1', '?????', PORT_ACTV_TYP.PORT_ACTV_TYP_SRC_CD, PORT_ACTV_TYP.PORT_ACTV_TYP, SFT_DLT_STS.SFT_DLT_STS_SRC_CD, SFT_DLT_STS.SFT_DLT_STS
FROM
SELECT LOW_VALUE PORT_ACTV_TYP_SRC_CD, MEANING PORT_ACTV_TYP
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BRKR_PORTS'
AND COLUMN_NAME = 'WORK_PORT_TYPE') PORT_ACTV_TYP,
(SELECT LOW_VALUE SFT_DLT_STS_SRC_CD, MEANING SFT_DLT_STS
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BANKS'
AND COLUMN_NAME = 'REC_STATUS') SFT_DLT_STS
UNION
SELECT 2 , '??????', PORT_ACTV_TYP.PORT_ACTV_TYP_SRC_CD, PORT_ACTV_TYP.PORT_ACTV_TYP, SFT_DLT_STS.SFT_DLT_STS_SRC_CD, SFT_DLT_STS.SFT_DLT_STS
FROM
SELECT LOW_VALUE PORT_ACTV_TYP_SRC_CD, MEANING PORT_ACTV_TYP
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BRKR_PORTS'
AND COLUMN_NAME = 'WORK_PORT_TYPE') PORT_ACTV_TYP,
(SELECT LOW_VALUE SFT_DLT_STS_SRC_CD, MEANING SFT_DLT_STS
FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
WHERE TABLE_NAME = 'BANKS'
AND COLUMN_NAME = 'REC_STATUS') SFT_DLT_STS
Now you can use dataset to make UNION.

How to use temporarly table wid record type

Hi,
how to use temporarly table wid the record type wid this example
declare
type empcurtyp is ref cursor;
type rectype is record (veid t.emp_id%type, vename t.ename%type);
TYPE tabtype IS TABLE OF rectype;
empcv empcurtyp;
vtab tabtype;
begin
open empcv for select emp_id,ename from t;
loop
fetch empcv into vtab;
exit when empcv%notfound;
dbms_output.put_line(vtab.vename||vtab.veid);
end loop;
close empcv;
end;
here we hav table t and i m taking only two fields of the table t which r emp_id and ename.

Try this
declare
type rectype is record (veid t.emp_id%type, vename t.ename%type);
type empcurtyp is ref cursor return rectype;
TYPE tabtype IS TABLE OF rectype;
empcv empcurtyp;
vtab empcv%rowtype;
begin
open empcv for select emp_id,ename from t;
loop
fetch empcv into vtab;
exit when empcv%notfound;
dbms_output.put_line(vtab.vename||vtab.veid);
end loop;
close empcv;
end;

How to use XREF table in BPEL?

Can anyone tell me how to use XREF table in BPEL ??

It is used to build up an XML fragment to the element on the target side...
please refer this link....
http://kr.forums.oracle.com/forums/thread.jspa?threadID=2252997&tstart=2
Thanks,
N

How Clean ip Route Table and configuration

How Clean ip Route Table and configuration?
Cisco have any best practice?

Hey Juan,
your question is not very clear but i believe you want to know how to clean ip route table and configuration. So:
1. Cleaning IP routing table - clear ip route * - This will refersh the routing table.
2. Cleaning configuration - It depends on the device however in most of Cisco devices you may clear the startup configurtion and its done :)
HTH.
regards,
RS.

How to use External Tables

Hi, I want to know how to use external tables? The procedure i follow for SQL*Loader in my shell script is:
Call the sqlldr
Check return code
If return code = 2. get count of records from bad file and exit.
If return code != 0 and != 2 then exit as fatal error
If return code = 0 then continue.
But i don't understand how to use external table as it is not invoked and does not have a return code.

Hello,
What do you mean alogrithim, do you mean to invoke external table as you invoke sqlldr? You can generate external table script from sqlldr and use it to load data but you might have to modify the table name and datafile name . You can see if any bad file generated from sqlldr and if yes then you can generate external table (using sqlldr) or based on your bad file. May be if you can list what exactly you want in bullet points, then it will be easier to suggest you.
Regards

How to use "Routing Table" option in Proxy service in OSB ?

Similar Messages

Maybe you are looking for