How to Use Same Asset Number with Different Sub-number
Hi
We want to sell some assets and buy them back on lease. We want to use same Asset number with different sub-number under the same company code. This new asset will be under different Depreciation Area (Statistical).
We use external numbes for assets . And same asset number range is used by all compnay codes.
Please suggest whether this is possible & how.
With Regards,
Nitin
Hi,
Go to field status for asset master data section and change the field status to optional for field Deactivation date, then follow the below steps.
You can create an sub asset number to an asset, which is already deactivated by retirement as like normal sub asset creation with AS11.(While creating sub number, you need to remove cap date and deactivate dcate field manually from asset master)
With this you can get new asset number as same as your old retired asset main number and but sub number will be different.
To post to diff dep area, other than 01, then you first create an acq transaction type, which will post only to specific areas and then use the new asset number in ABSO to post acq with your custom TTY.
I have tested and found working well in my system............Try now in your test client
Thanks,
Srinu
Similar Messages
-
How to use the same OC4j server with different port number
How to use the same OC4j server with different port numbers..?
I have to OC4J installed on my machine on different hard disk drives....
I want to be able to run both the server simultaneously..?
is it possible ..it yes then how..?
for that i have changed the port number of one server...
but when i am trying to start the other server with different port number..it says that JVM -Bind already...
Is there any clues...?
Nilesh GIn the config directory:
default-web-site.xml: Change the port the HTTP listener listens on
jms.xml: Change the port the JMS service listens on
rmi.xml: Change the port the ORMI listener listens on.
Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
Rob
Oracle -
How to use same DFF for two different forms with :BLOCK.field reference
Hi,
Can anyone suggest how to use the same dff in two different forms by using :BLOCK.field reference.
Scenario is the same DFF is referenced by two forms, viz. Form-1 & Form-2.
Form-1 Reference Field is :BLOCK.field name, but the same block is not available in Form-2, which throws an error while opening it.
Any pointers please.
Thanks,In the environment I currently have access to do not have similar setup.
Let say you setup the DFF1 default value to $HEADER.customer_name, the name of the DFF is CUSTOMER_NAME, description can be anything.
In DFF2, default value should be a SQL, where you can reference the DFF1. For example, SELECT DECODE($FLEX.CUSTOMER_NAME, 'ABC', 1, 'DEF', 2, NULL) FROM dual
In this case, you can reference the DFF1. -
Crystal Reports XI - How to pull same column value with different select...
I have a report with many (around 30) sub reports and it is giving serious performance issue. I am currently finding out a strategy to improve the performance. I see that most of the sub reports are taking same parameters from main report except for one parameter which is different for each sub report and hard coded in them and pulling up the same column value from a oracle database with a different select criterion. I am trying to find out a way using either of command/crystal formula/SQL expression which can do the same job for me and give me performance improvement. I tried to take the parameters from the main report in one sub report and mapped them to parameters being transferred to the command and then drag and drop the field for which I need to display the value but due to some reason it is not returning values when I am trying multiple commands...I need some help in selecting a strategy for this issue resolution and some guidance....Any help would be highly appreciated....
My version is 11.5.8.826. First of all I need to make it clear that I have 6 set of sub reports and each set has 5 sub reports. So if I can resolve the issue for one set, I resolve it for all. The sub reports are doing nothing but fetching a column value using a simple SQL SELECT query and appending to the right of a box in main report. The issue is that all these queries embedded into the sub reports are using same SQL except for one parameter in the "where" clause and they are fetching same column value from the database and fortunately all of them are returning same number of results. So at the end these results create a table when run. The only way I can stop using sub reports is by creating a table in the main report and use some object(formula/command/SQL expression or whatever) to fetch that column value using the same filter conditions. But please take a note that I need to use and append the same column value from a database table and use different filter conditions and append them to the right so that at the end they create a table...as long as I get the table in the output with a decent performance , anyone will be least bothered about what I used inside the report.....please ask me as many questions to get more lights on the issue....
-
How to use one Datasource name with different pools
Hi,
I am using WLS 814 with 4 managed servers.
Our application uses (Entity) EJBs with a defined datasource name.
Each managed server should have its own connection pool pointing to a separate database.
Now I want to deploy the same EAR on all servers.
But how can I use the same datasource name across all servers?Frank Bareuther wrote:
The DBMS is the same, we are only using a different database user to log on.
There is a separate db user for each server.
The EAR with a given datasource name in the entity EJBs should be deployed
on all 4 servers without changing descriptors.Interesting. And what is the value of using a different schema/user in the
different servers? I do believe that this configuration issue can be
achieved but I have not done it myself. I believe there is a way to
have some portions of a managed server's configuration by in a per-server
config file. That would be where you would define the pool. The DataSource
could also be there (with the same name for every server), or it could
be in the common one in the admin server.
I would file a support case to get this documented to show you how to
do what you want.
Joe -
How to use same collection type in different database
i have created a synonym for a package whcih uses a collection type as input and when i am calling through that synonym it is throwing an error b'coz of the collection type saying wrong no. of arguements...
declare
collection_type collection_type:=collection_type('value');
begin
package_synonym1.procedure1(collection_type);
END;
how to rectify it can someone suggest....
a quick response would be highly appreciatedi have a package in schema A in which my input in a procedure is of type
like
create or replace package abc as
procedure efg (
ptbl_service_id in tbl_input_list,
pn_error_code_out OUT NUMBER,
pv_error_msg_out OUT VARCHAR2
and in schema A the type is created.the package is working fine
but when i am trying to test this package from database b with script as
declare
xyz tbl_input_list :=tbl_input_list('abcdefgh');
begin
abc.efg(
xyz,
pn_error_code_out,
pv_error_msg_out
end;
then it gives an error saying wrong no. of arguements ORA-06550
I have created the type in this database with the same OID as well and i have also tried the option of creating a synonym or calling it through a database link...
Is there any other way through which we can use it.....
A Quick Response will be highly appreciated... -
Using SAP Business content with different client number
Hi,
I want to use and upload client numbers into SAP BW in an InfoObject as master data.
The client number is for example with 9 figures.
Can I use the SAP standard InfoObject 0Client for that or is there another one or should I define my own InfoObject?
Thank you!You can do it in both the ways.
-
How to use same web cams with jmf?
Hello, I'm doing a project with netbeans 4.1 and I need to use two webcams,the same model web cams.The problem is that jmf only detects one of this. I read that if you open two jmfStudio you can use two cams but I want do this programming in java.
Somebody have any idea?
Thanks for allHello,
Maybe you have already solve your problem...I think you could use something like this:
Vector deviceListVector;
deviceListVector = CaptureDeviceManager.getDeviceList(null);
if (deviceListVector.size() == 0)
System.out.println("I can't find devices");
System.exit(0);
if (deviceListVector == null)
System.out.println("I can't find devices");
System.exit(0);
for ( int x = 0; x < deviceListVector.size(); x++)
CaptureDeviceInfo deviceInfo = (CaptureDeviceInfo) deviceListVector.elementAt(x);
String deviceInfoText = deviceInfo.getName();
System.out.println(deviceInfoText);
}In this way you can see which devices are conected. I don�t know if it will be useful. :)
ane -
Using same Aperture library with different machines
Hi
I travel between locations some 7hrs apart and want to take my Aperture Libary and Vault with me to add to and work on in each location.
I have a Mac Pro at one location and MBP and 2011 Mac Mini (pre thunderbolt) at the other running Aperture v3.1.3 and Snow Leopard 10.6.8
I have my Aperture Libary, Vault and Referenced files etc on a seperate/external drive/s to my OS and applications.
Having to reconstruct the libary from a vault each time I change locations is time consuming as I am working with a growing Libary at the moment 720GB + 500 GB of referenced files on a second HDD
I would just like to be able to set it up so I can just plug the Aperture library and Referenced files in launch Aperture and start working
Is anyone doing this? or has any ideas ?
Many thanks in anticipationA few points to consider:
To make a vault into a normal library you use the restore function in Aperture.
Having the vault and live library on the same spindle is not a good idea as you realize, if one goes they both go, so you need to get the vault onto a separate drive ASAP. Also as the masters are referenced you need to make provision to get those backed-up as well. And remember as they are referenced backing up the library (either by vaulting it or copying it) will not back up the masters in this case.
Given that you are physically moving the drive between locations getting everything backed-up is even more important. Also remember if the environments you are moving the drive between are extreme (moving from cold to warm in either direction) give the drive time to acclimate before spinning it up. And after you have spun it up give it some time before actually writing to it.
The question of using a vault over simply copying the library is asked a lot. There are pros and cons to each.
On the plus side. If you have a managed library the masters are backed-up with the vault and as libraries with masters in them tend be large the fact that the vault operation only write the changes after the initial vault operation makes for quicker back-ups. Copying a full library with referenced masters can't be a long process.
If the library has referenced masters in it the advantages of the vault aren't as great. You still need to back-up the masters seperatly and as the library tends to remain smaller copying it isn't as big a deal.
One other thing to keep in mind about vaults. You can't get just a single image or project out of it. It needs to be restored before you can open it with Aperture. So you will need the disk space to do the restore. With a copy you can just access it with Aperture.
Hope this helps,
regards -
Multiple users using same files, but with different libraries
My wife and I both have our own iPhone 3Gs. We also have separate user accounts on our MacBook Pro. We would like to share the music/video files that we've got stored on a network drive, but we don't want to have the same library file. We both have different tastes in music, so I'd prefer if our song ratings were separate, as well as the rest of the library info (namely "last played date"). Is there a way that we can keep separate library files, but also be able to have new song purchases on one library automatically added to the other?
FryeX wrote:
I have this in my controller:
-(IBAction) setSize:(id)sender
And it would be enough to get to the title of the button
The sender param should be a pointer to the originating button, and you can use the button's tag property to id it. E.g.:
-(IBAction) setSize:(id)sender {
UIButton *button = sender;
NSString *title = button.currentTitle;
int tag = button.tag;
NSLog(@"sender=%@, title=%@, tag=%d", sender, title, tag);
- Ray -
I want to create new apple id, but dont want to loose existing data's downloaded using existing id.I still want to use two apple id
No. All apps purchased are forever linked to the original ID and there is no way to transfer them.
-
HI Team, Recently One week back I bought a new iphone 5 from India. They have given me a used mobile which has a different IMEI number when compared to the IMEI number present on the box. Please let me know how to proceed further
When you went back to the place where you purchased this phone, & asked them, what did they say?
No one here can help you with this, nor can/will Apple. You need to take this up with whoever you purchased this phone from. -
How can I edit multiple clips with different frame rates on the same timeline
how can I edit multiple clips with different frame rates on the same timeline
You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x -
How to download the same song(track) with different keys? iTunes seems to think I have already dowloaded the song and will not let me download the song in a different key or the Demo.
Hello Jigz19,
It sounds like you are unable to play a couple of songs from your library becuase you get a message that the computer is unauthorized to play, but other content purchased that same day works without issue. I would verify that the affected songs were purchased with the same Apple ID first:
Recovering a forgotten iTunes Store account name
http://support.apple.com/kb/ht1920
Open iTunes
Highlight one of the items you have purchased (You can find your purchases in your Purchases playlist).
Choose File > Get Info.
Click the Summary tab.
The Account Name area will list the account used to purchase the item. Unless you have changed accounts, this is your iTunes Store account name.
If so, then delete the songs:
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Then re download them with this article:
Download past purchases
http://support.apple.com/kb/ht2519
Thank you for using Apple Support Communities.
All the best,
Sterling -
How to do consolidation using two chart accounts with different currencies
Hi
How to do consolidation using two chart accounts with different currencies and do we need to use same fiscal year variant ?
What would be the impossible factors when we use two company codes with two chart of accounts ...
Regards
KesharikaGood Afternoon
You need to use translationa and/or valuation
translation takes account in foreign currency and translates to group currency
valuation takes account in currency 1 and restates into currency 2 for a company with currency 2
so depends on which company you are consolidating for, a company in a foreign currency in that currency or consolidating a compnay in foreign currency to parent company in another currency
Maybe you are looking for
-
Is there any way at all to install Windows 7 32 bit onto a MacBook Pro 13 in Retina Late 2013? The windows software I need won't run on Windows 7 64 bit.
-
How to use recovery files in recovery partition in hp dv6 notebook in windows 7
i am trying to recover my notebook to factory settings without using recovery disks in windows 7. but using whenever i try to recver from the system recovery file in control panel, when the computer restarts it says that there is no bootable media or
-
MBP not connecting to external VGA display
Hello everyone, I have an issue with my MBP (13", Mid 2009) and my external monitor (Samsung SyncMaster 2343NW). I'm connecting the display using a simple Mini DisplayPort to VGA adapter. The problem is that it is not a consistent issue. Sometimes it
-
Program PFCG_REGENERATE_ACT_GROUPS
Hi Friends, Please give your advise for the below one. My client has recently upgraded from 4.6 to ECC6 .They are facing problem in this report 'PFCG_REGENERATE_ACT_GROUPS'. Its running as a background job in 4.6 without any problems. But they are fa
-
How to create create oracleserviceSID manually through command prompt
Hello Experts , We want to create oracleserviceSID manually through command prompt in our BIW 3.5 server based on oracle 9.2 . wts the procedure of create this oracle service manually . Requested to revert at earliest as this is very urgent . points