How to use sap multi-client in SUP+DOE

hi guys,
How to use sap multi-client in SUP+DOE ?
Anybody know the steps necessary for do this ?

1. If you want to use same SUP server for all the DOE clients then:
- you need to download the bundle from SDOE_ESDMA_DESIGN transaction from each client
- You should deploy the ESDMA bundle multiple times in SUP with different names
2. If you want to use differnt SUP server for each client in DOE then:
- you need to download the bundle from SDOE_ESDMA_DESIGN transaction from each client
- Deploy in each SUP server. It can be same name everywhere.
Regards,
Siva.

Similar Messages

How to use remote desktop client in mountain lion

How to use remote desktop client in mountain lion.
I want to connect my other system(ubuntu) using mac remote desktop client, But i could not locate remote desktop client in moutain lion.

In Ubuntu 12.xx use Dash to find "Desktop Sharing" and set the preferences, including requiring a password.
Then in Ubu use System Settings > Network to determine your Ubu machine's IP address, such as 192.168.1.13.
On the Mountain Lion Mac do Finder > Go > Connect to Server and enter: vnc://192.168.1.13 or whatever your IP is. Enter the password that you used in the Ubu Desktop Sharing setup, when asked.
On the Ubu machine answer the question that pops up asking for permission to connect. Your Ubu screen will now show up on the Mac, and you can remote control it. Here I am running "Octave" (a math program) on the Ubu machine, remotely.
Works great! BTW, you can do this from an iPad too, using a VNC client such as Mocha VNC Lite. You can even run both remotes simultaneously.
Good luck.

How to use the multi-touch trackpad to adjust icon size?

After I upgrade my OS X 10.6 to 10.9.2, I lost.
Everyday I search the forum to look for the "feeling" of using Mac OS (migrate from windows to OS X10.6). The OS X 10.6 is just great.
Now the questions, how to use the multi-touch trackpad to adjust icon size with simple pinch open or close gesture?
Thank you.

Welcome to Apple Support Communities. We're users here and don't speak for "Apple Inc."
Using the multi-touch trackpad to 'zoom' in or out is temporary.
The best way to permanently change icon size on the Desktop is to Command+click on an empty place on the Desktop screen and select Icon Size from the Desktop preference pane:

HT3390 OS X 10.9.2 how to use the Multi-Touch trackpad to adjust icon sizes in the Finder like previous OS?

After I upgrade my OS X 10.6 to 10.9.2, I lost.
Everyday I search the forum to look for the "feeling" of using Mac OS (migrate from windows to OS X10.6). The OS X 10.6 is just great.
Now the questions, how to use the multi-touch trackpad to adjust icon size with simple pinch open or close gesture?
Thank you.

I might also add, you can run 10.6.8 Server in virtualization, if you need access to Rosetta applications:
https://discussions.apple.com/docs/DOC-2295#ROSETTALION

How to use SAP Memory analyser in CE7.1 EHP1

Hi All,
Please Can you provide proper link to know how to use SAP Memory analyser in CE7.1 EHP1.
It is urgent .
Regards
Mahesh

Problem solved.

How to use SAP XI to get Inspection Lot IDOC when Insp. lot is created

I want to create a 3rd party .NET app that gets an Inspection Lot IDOC when an inspection lot is created, gather the inspection results, then push the results back to SAP in an IDOC. How do I use SAP XI to do that? I developed an HTTP listener .NET app and configured a sender communications channel for the SAP System and a receiver connunications channel for the HTTP adapter in the XI integration scenario, but how do I configure the XI integration scenario to send my app an IDOC when an inspection lot is created, and what IDOCs do I use?
Thanks,

Hi Ed
I think you can use
IDOC TYPES : QALITY01, QALITY02
in XI you can create
IDOC to HTTP as a scenario
IDOC need to be triggered from SAP system and you can import the IDOC metadata into XI from SAP
Check this thread it will help
Re: IDOC to HTTP
Thanks
Gaurav

How to use SAP Business Workflow along with Interactive Adobe Form

Hi Experts,
I am working on SAP Business Workflow since last couple of years.
Now i have got a new Project where client wants to use SAP Business Workflow along with Interactive Adobe Form.
I am new to Interactive Adobe Form and Portal thing and i really dont know from where to start.
We have one central system and 2 local systems. when we do create a Material document using adobe form workflow should trigger and notification should go to group of users who can approve or reject it, once they approve it document gets created in central system and replicated to 2 local system through ALE.
In the Local system they do extend the document to different plants, again workflow triggers and notification will go to Managers inbox for the approval.
Once the final approval done data should go and store in SAP.
Now here i have couple of Questions.
1. In SAP R3 Business workflow when i execute the workitem from the inbox i do get the application screen ( i.e. MM01 MRP View ) , what is going to happen if the same case i have with Adobe form?? is it possible or do we have to design a adobe form and we will have to map the fields with backend application??
2. Do i have to maintained 3 separate Org Structure for 3 different system or using UWL i can manage the show
3. Untill final submit is not done, where the application data is going to be, is there any kind of buffer that we will have to keep it or its there with XML file??
Please help me out.
Thanks in Advance.
Regards,
Manoj

Hi Manoj,
Welcome to ADOBE Forms related Workflow Development. Well, here are my answers.
1) You can go for either go for ISR based development or WD development with Adobe form. In both the cases you can achieve your requirement. Yes, you will have to design the Adobe form and bind the fields to backend.
2) Am not clear or your System landscape to advice you in these regards.
3) Until final Submit/Approval is done, the data can be stored in WORKFLOW CONTAINERS or XML FORM(If you go for ISR based Development).
Hope this helps.
Regards
Raja Sekhar

How to use SAP RDE CRM Users products

Dear Experts
Am facing a issue when use SAP RDE CRM Users product as belows:
At this time, my customer running with ERP ERP 6.0 EHP4 in three
landscapce (server DEV, server TEST and server PROD)
And now, my customer want to use SAP RDE CRM Users product and they
bought SAP RDE CRM Users product & License from SAP
I have several question as follows:
Conditions necessary and sufficient to be able to install and run SAP
RDE CRM Users product ?
With a three landscape of my customer at this time -> Need more
hardware for the installation of SAP RDE CRM Users ?
SAP RDE CRM Users product is a Integration of ERP ?
SAP RDE CRM Users product can be installed as a component of ERP
system ? or SAP RDE CRM Users product is a standalone system ?
If a component of ERP -> how to install and use it
If a standalone system -> how to install and use it
Please guide me to know this issue
Thanks and best regards

Hi,
Can you give me information about crm rde if you got them??
Thanks in advance,
Frank

How to configure sap maxdb client to connect to SAP ERP system (SAP HR)

Hello all,
I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps
1. Install SAP DB using installation MAXDB CDs
2. Install SAP Livecache and standalone server SCM 5.0 using SAP ERP master and Livecache dvds.
3. install Livecache client fromSAP ERP master and livecache dvds between SAP ERP and livecache server.
4. configure in LC10, tcode.
but when i press on livecache monitoring in LC10 it gives me following error.
Command: DBMRFC
Parameter: -gsapfive -xsapgw00
SY-SUBRC: 8
Return Code
sap maxdb client

i tried the said things and after that i am getting following error in DB59, first three steps are successful but 4 one is failing.
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: <hostname>_<SID>_00 ( Windows NT )
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Successful
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( LCA ) No connection
 SQL Code: 4008
 POS(1) Unknown user name/password combination
 For detailed information, see the developer trace for work process: 1
please see trace from file dev_rfc and dev_w0 below
log for dev_rfc
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: MKUMAR (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
Log from dev_w0
A RFC 1485 CONVID 47150684i tried the said things and after that i am getting following error in DB59, first three steps are successfuk but 4 one is failing
trace from file dev_rfc is below
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: ABC (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
A RFC 1485 CONVID 47150684
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: abc (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47149684, {FDB31AE0-D203-F1C0-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host <HOSTNAME> / sapgw00
M * ERROR program IDOCTEST not registered
M *
M * TIME Fri Jan 07 18:15:25 2011
M * RELEASE 701
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 679
M * MODULE gwr3cpic.c
M * LINE 1778
M * DETAIL TP IDOCTEST not registered
M * COUNTER 715
M *
M *****************************************************************************
M
A RFC 1485 CONVID 47152747
A * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: ABC (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47151731, {FDB31AE0-D203-F1C1-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Mani

How to use Http test Client for Java Client Proxy Scenario

Hi,
I build a scenario using Java Client Proxy where JSP as my FrontHand.
Can I know that whether i can use Http Test Client in place of JSP for sending data and getting response back. If yes than how can i implement this ?
Regards,
Abhi

Hi,
with Http Test Client you post your messages
directly to the Integration Engine (not using adapter framework)
so you can use Http Test Client to simulate any message
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

How to use sap.me library in openUI5.

HI All,
Can i use sap.me library in openUI5.
I mean how to use data-sap-ui-libs='sap.m', 'sap.me' in openui5 resources.
thanks in advance
ravi varma.

thanks for quick replay Chandra,
do we have any alternative for using sap.me.Calendar
As we have sap.me.Calendar in latest ui5 version(1.20.3) sdk.

How to install SAP B1 client in Ubuntu 11.04

Hi everyone!
I use Ubuntu 11.04 and my server is Windows 2003 and SQL Server 2008 to DB
I trying of install SAP B1 client in Ubuntu, to do a change of SO in the work machines. And need documentation to i can do it, because the installer that i have is for Windows SO.
Thanks for all help that can give me...

Dear Sai,
Pease delete all temp, recent files from the system then restart the sytem
Then you install client with run as administrator..
Regrads
Ajith

How to use a fixed client localPort in an RMI communication?

Hi,
I am trying to use a fixed localPort in RMI communication using CustomSocketFactories. When I use a fixed localPort the client program runs fine with a right lookup and correct stub method invocation for first time, but when I run the same program immediately I am getting an exception "java.net.SocketException: errno: 125, error: Address already in use for fd: 9".
I also tried to close the socket of ClientRemoteFactory in my client program in a finally block, still I am getting the same exception. If I run the same program after a few minutes it runs fine.
Bottomline is -- "it is clear that if I use a fixed localPort in my customClientFactory, it will be in use for sometime even after I am done with the stub method".
Is there anyway or a work around to clean the socket after it's use. I can not use an anonymous client port for security reasons, I must have to use a fixed localPort. If anyone has any other ideas or approach, please share with me. Any help is highly appreciated as this is very urgent.
Thanks,
Murthy

I'm not sure that you really want to do this unless you are trying to resolve some firewall issue which might be better resolved another way. For a start this technique will limit you to one RMI call per host at any one time.
However, the API you are looking for is java.net.Socket.setReuseAddress(true), which was introduced in JDK 1.4. You have to do this before the socket is connected, i.e.:
Socket s = new Socket();
s.setReuseAddress(true);
s.bind(new InetSocketAddress(localPort));
s.connect(new InetSocketAddress(remoteHost,remotePort));
EJP

How to use crystal report client?

Hi all,
In my java application we are using crystal report for generating report. For certain condition we are not in the position to use crystal report server. So, is that any possibility to generate the report without crystal report server? i heared something we can generate the report through by using crystal report client...is that possible?
Please help me..
Thanks,
Shiva

I did that and i set up a trace file withing the sql.net and i reviewed the file and everything is looking fine for me, there is no error at all.
i can see his session created when he build new connection and run any query, but if he modified that query, the connection is dropped, still dont get it.
he used to use before VPN but now he has direct connection.
i also put this parameter in his tnsname.ora file (RECV_BUF_SIZE=11784)
there is only one thing strange, when i try to use sqlplus /nolog, i couldnt run the sqlplus, or tnsping and it keeps telling me any orginized program or something like that, i asked him to install the oracle client again, because looks like some libraries not working fine, however he complian the crystal report works fine, so oracle client must work ok, i explained to him it is totally different thing, but he refused to confess.
so i dont know what else i should do,

How to bring sap* in client 001

Hi ,
By mistake i deleted all users in client 001 at db level
( delete from SAPR47.USR02 where mandt=001)
It is a test system, and 3 rows got deleted when i executed above coomand ( DDIC, SAP*)
How can i bring back the ddic and sap* in 001
Regards,
Chitra

Hi,
Set parameter login/no_automatic_user_sapstar = 0
Restart the SAP instance.
Then login client 001 with user sap* and password as pass.
Once you login to system, do client copy from 000 to 001 using profile SAP_USER.
Thanks
Anil

How to use sap multi-client in SUP+DOE

Similar Messages

Maybe you are looking for