How to use SAP RDE CRM Users products
Dear Experts
Am facing a issue when use SAP RDE CRM Users product as belows:
At this time, my customer running with ERP ERP 6.0 EHP4 in three
landscapce (server DEV, server TEST and server PROD)
And now, my customer want to use SAP RDE CRM Users product and they
bought SAP RDE CRM Users product & License from SAP
I have several question as follows:
Conditions necessary and sufficient to be able to install and run SAP
RDE CRM Users product ?
With a three landscape of my customer at this time -> Need more
hardware for the installation of SAP RDE CRM Users ?
SAP RDE CRM Users product is a Integration of ERP ?
SAP RDE CRM Users product can be installed as a component of ERP
system ? or SAP RDE CRM Users product is a standalone system ?
If a component of ERP -> how to install and use it
If a standalone system -> how to install and use it
Please guide me to know this issue
Thanks and best regards
Hi,
Can you give me information about crm rde if you got them??
Thanks in advance,
Frank
Similar Messages
-
How to Use 'uid' for AD Users Without Domain Name For User Log in OAM
How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
How can we remove @abc.com
We are using OID 11g and OAM 11g
Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
We are in OID 11g.
Any help on this greatly appreciated.I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
Thanks,
Hussein -
How to use advanced tab in user reports?
Hi,
How to use "advanced" tab in user reports?
I have two reports. I fill "Report ID" in both and then I can push "Add Report" and fill fields property.
Then I'm can "drill" from one report to another on right click, but how to pass parameters?
Is it even possible?
Regard
LiborThank you for reply.
I can't get it working.
I have two reports:
1. report:
Name: test
SQL: select 1 NUM, 'text' TEXT from dual;
On advanced tab:
ReportID: -null-
Name: test2
Report: Test2
2. report
Name: test2
SQL: select :NUM from dual;
Now, when I run the first report and click do right click on a row and select TEST2
from popup menu, it navigates to the second report test2, but WITHOUT actual value
from NUM column from first report.
I'm using latest version of SQL Developer (1.1.1.25) and I like reports.
With this feature it would be even better.
Regards
Libor -
How to use SAP Memory analyser in CE7.1 EHP1
Hi All,
Please Can you provide proper link to know how to use SAP Memory analyser in CE7.1 EHP1.
It is urgent .
Regards
MaheshProblem solved.
-
How to use sap multi-client in SUP+DOE
hi guys,
How to use sap multi-client in SUP+DOE ?
Anybody know the steps necessary for do this ?1. If you want to use same SUP server for all the DOE clients then:
- you need to download the bundle from SDOE_ESDMA_DESIGN transaction from each client
- You should deploy the ESDMA bundle multiple times in SUP with different names
2. If you want to use differnt SUP server for each client in DOE then:
- you need to download the bundle from SDOE_ESDMA_DESIGN transaction from each client
- Deploy in each SUP server. It can be same name everywhere.
Regards,
Siva. -
How to use LSMW on CRM for bulk master data creation?
Hello Experts,
I need your help to able to use LSMW on CRM for bulk master data creation. Below is described my detailed requirement; -
We have CRM 2007 integrated with SAP ISU (ECC6.0). As per business process all Business Master Data (BP details, Business Agreement details etc) and Technical Master Data (Connection Object, PoD etc.) is created in CRM and then it is replicated in ISU. We are going to start Assembly Test soon. Now we need to have all master data in place. Tool we want to use is LSMW.
Now can you help me right from scratch on how to use LSMW for bulk master data creation in CRM?
Please give me documents / links etc that is relevant.
Regards,
RohitHi,
I have looked into your query.
These are some information which might be useful to you.
What is LSMW?
Legacy System Migration Workbench or LSMW is SAP standard program that can be used to easily load / change master data or transactions in SAP without any programming at all. It can be used to upload data at cutover, such as: open orders, contracts, materials, vendors, stock on hand. It can also be used in a production system to make changes to existing data. Very limited authorization checks are available on the transaction, so the use of it must be very well controlled.
One input file can be used to create all the views of the material master. For all the material types. Even if different views and fields are used for the different materials.
Steps to take
1. Create text file with data to be loaded
2. Set up and run LSMW
The following link will provide good information on LSMW Idoc method:
[http://help.sap.com/saphelp_nw04/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm]
I hope this helps.
Regards,
Venkat -
How to access Sap portal login user in ejb web service
Hi,
I wnt to access SAP Portal login user in my ejb application which resides on the same server.
I am using following code
try {
IUser user =null; IWDClientUser wdUser = WDClientUser.getCurrentUser();
user = wdUser.getSAPUser();
} catch (WDUMException e) {
// TODO Auto-generated catch block
e.printStackTrace();
Some additional jar files are required for this?
The same code works fine with webDynpro but not with ejb.
Thanks in advance
Best regards,
NileshThanks for reply.
I have already added com.sap.security.api in my EJB module project classpath. How to add the same in EJB application Project (application-j2ee-engine.xml)?
Best regards,
Nilesh -
How to use SAP XI to get Inspection Lot IDOC when Insp. lot is created
I want to create a 3rd party .NET app that gets an Inspection Lot IDOC when an inspection lot is created, gather the inspection results, then push the results back to SAP in an IDOC. How do I use SAP XI to do that? I developed an HTTP listener .NET app and configured a sender communications channel for the SAP System and a receiver connunications channel for the HTTP adapter in the XI integration scenario, but how do I configure the XI integration scenario to send my app an IDOC when an inspection lot is created, and what IDOCs do I use?
Thanks,Hi Ed
I think you can use
IDOC TYPES : QALITY01, QALITY02
in XI you can create
IDOC to HTTP as a scenario
IDOC need to be triggered from SAP system and you can import the IDOC metadata into XI from SAP
Check this thread it will help
Re: IDOC to HTTP
Thanks
Gaurav -
How to use SAP Business Workflow along with Interactive Adobe Form
Hi Experts,
I am working on SAP Business Workflow since last couple of years.
Now i have got a new Project where client wants to use SAP Business Workflow along with Interactive Adobe Form.
I am new to Interactive Adobe Form and Portal thing and i really dont know from where to start.
We have one central system and 2 local systems. when we do create a Material document using adobe form workflow should trigger and notification should go to group of users who can approve or reject it, once they approve it document gets created in central system and replicated to 2 local system through ALE.
In the Local system they do extend the document to different plants, again workflow triggers and notification will go to Managers inbox for the approval.
Once the final approval done data should go and store in SAP.
Now here i have couple of Questions.
1. In SAP R3 Business workflow when i execute the workitem from the inbox i do get the application screen ( i.e. MM01 MRP View ) , what is going to happen if the same case i have with Adobe form?? is it possible or do we have to design a adobe form and we will have to map the fields with backend application??
2. Do i have to maintained 3 separate Org Structure for 3 different system or using UWL i can manage the show
3. Untill final submit is not done, where the application data is going to be, is there any kind of buffer that we will have to keep it or its there with XML file??
Please help me out.
Thanks in Advance.
Regards,
ManojHi Manoj,
Welcome to ADOBE Forms related Workflow Development. Well, here are my answers.
1) You can go for either go for ISR based development or WD development with Adobe form. In both the cases you can achieve your requirement. Yes, you will have to design the Adobe form and bind the fields to backend.
2) Am not clear or your System landscape to advice you in these regards.
3) Until final Submit/Approval is done, the data can be stored in WORKFLOW CONTAINERS or XML FORM(If you go for ISR based Development).
Hope this helps.
Regards
<i><b>Raja Sekhar</b></i> -
Install Sun ONE Directory Server 5,2 & how to use it for authenticate user
Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
I read the forum seeking for anwser and i get confuse
Thanks for the help and sorry for any inconvenient
Message was edited by:
Aku_28
Message was edited by:
Aku_28I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
Chapter 14 System Administration Guide: Naming and Directory Services
Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms". -
JClient/ADF How to use JCLoginDialog to change user
Hi,
can anyone give me a clue how to use JCLoginDialog that is automatically generated during design time ?
I`d like also to add there database name and sid to change also database not only user during run-time.
thx in advance,
Jaceki,
JCLogin Dialog is a JAAS based authentication dialog that doesn't perform database authentication or connection. We are workin on a whitepaper explaining what needs to be done to write a database login screen instead
Frank -
How to use sap.me library in openUI5.
HI All,
Can i use sap.me library in openUI5.
I mean how to use data-sap-ui-libs='sap.m', 'sap.me' in openui5 resources.
thanks in advance
ravi varma.thanks for quick replay Chandra,
do we have any alternative for using sap.me.Calendar
As we have sap.me.Calendar in latest ui5 version(1.20.3) sdk. -
***How to use Java to change user password in *mdw file?
Hi,
Is it possible to use java to change user's password in the MS Access workgroup file(*mdw)? I have been searching for this topic for a long time, but no discoveries yet. Anyone has any idea?
Sincerely,
nonameisnameThere is probably a windows API call that does it.
Once you find it, you wrap it in C code and then use JNI to call it from Java. -
How to use External Drive for Users Directory
I just did a clean install on my Mac Mini - I have over 4 TB of storage attached, but the main drive (160 GB) keeps filling up. What is the best way to have the Users directory located on an external drive?
Thanks for your help,
ChrisThink about it for a second. What would happen if that external drive wasn't connected for some reason? Maybe it died the night before, as external drives have a habit of doing. How are you going to log into the system?
If the main drive is filling up, it says that you aren't making effective use of the attached storage. There's nothing saying you have to keep video files in the Movies folder, and music in the Music folder, etc. Find some things, that aren't your user profile, and move them to your external storage. Or consider putting in a larger internal drive.
< Edited by Host > -
Hi, every one:
Here's my question of my day - >>>
I am using weblogic 6.1 SP2 right now - running on Unix and Win 2K, and
I got a web service up and running called Price Update web service through
which user can pick up a price and push a deal to another web service
called: deal service, the deal service will take the user deal and book the
deal ( sending a JMS message to a Queue, a MD will pick up and do the work,
then send the confirmation to another JMS Queue ), then the confirmation
will be picked up and sent to another web service , called: User Deal
Confirmation Service, here's the question:
1. Since the client application is only allowed to see its own confirmed
deals, how I can make the confirmed deal encrypted based on a server
generated key or the session id that client application provides
2. Now, I have 3 webservices: update, deal and confirm, each of them has a
client.jar file available - from the client application point of view, do I
need all these 3 client.jar, or I just need one of them ?????
3. How can I use web service call back in wls 6.1 sp2 ?????? - in the 7.0
beta, you can do this easily in the workshop, in the second question above,
I think I need some how relate the confirmation to the client conversation
id ??
thanks a lot for the input, have a nice day.
regards,
mark.Any comments ?
mark
"markhu" <[email protected]> wrote in message
news:[email protected]..
Hi, every one:
Here's my question of my day - >>>
I am using weblogic 6.1 SP2 right now - running on Unix and Win 2K,and
I got a web service up and running called Price Update web service through
which user can pick up a price and push a deal to another web service
called: deal service, the deal service will take the user deal and bookthe
deal ( sending a JMS message to a Queue, a MD will pick up and do thework,
then send the confirmation to another JMS Queue ), then the confirmation
will be picked up and sent to another web service , called: User Deal
Confirmation Service, here's the question:
1. Since the client application is only allowed to see its own confirmed
deals, how I can make the confirmed deal encrypted based on a server
generated key or the session id that client application provides
2. Now, I have 3 webservices: update, deal and confirm, each of them has a
client.jar file available - from the client application point of view, doI
need all these 3 client.jar, or I just need one of them ?????
3. How can I use web service call back in wls 6.1 sp2 ?????? - in the 7.0
beta, you can do this easily in the workshop, in the second questionabove,
I think I need some how relate the confirmation to the client conversation
id ??
thanks a lot for the input, have a nice day.
regards,
mark.
Maybe you are looking for
-
I have been taking online courses at Colorado Tech and when my firefox updated to 55.0, my classes were mot accessible because they suppported version 4.0 or lower. I can't seem to find a version 4.0 to go back to, since 4.0 has been working fine for
-
Issue in creating a new JSP in Quoting
I have created a new JSP in the quoting. That JSP is displaying the data properly but the cue card menu is not visible in that JSP. Is there any mapping need to be done to make it visble.
-
ABAP Routine in the Infopackage data selection
All, I have requirement where i need to write a routine on a Date field(Activity Year Month) which has to return values from the first to the last day of the Previous month in the data selection of the infopackage. I know that on Date there is a STD
-
HT5286 I want to buy a new os x mountain lion for my mac
Im running of os x lion and no beed to reinstslling maverics which is cant boot and cant install to my mac even im using internet recovery.
-
hello, i have a nokia lumia 720. i made on my desktop an excel file with pictures in it (bike routes). i uploaded it to skydrive and opened it with office, excel. there i can't see my pictures when i saved them on my desktop as .jpg. when i save them