How to use "sequence" after we add new data ?

Dear all :
Could someone tell me how to increase the number after we add new data and put the number into one field per time ?
Thank you

In the Initial Value property for an item on a block, you can assign it to a sequence value. Just put the name of the sequence in the Initial Value:
Specifies the default value that Form Builder should assign to the item whenever a record is created. The default value can be one of the following:
Here's the part of the help screen for Initial Value that shows how to assign a sequence.
     raw value (216, 'TOKYO')
     form item (:block_name.item_name)
     global variable (:GLOBAL.my_global)
     form parameter (:PARAMETER.my_param)
     a sequence (:SEQUENCE.my_seq.NEXTVAL)
Dave

Similar Messages

How do I erase a CD read/write disc on my macbook so I can add new data

help!
How do I erase a CD read/write disc on my macbook so I can add new data. If a disc is a RW, I shouldn't i be able to write to it after it already has some data on it?
I get a screen note saying I can't add anything because something is already on the disc... but it's only one little 3 meg file. But apple i info. shows no room on the cd.
How can I erase the cd and reuse it? I find no erase command and when I try to drag the file to the trash, i get another note saying i don't have permission... even tho I've check off the permission box.
sheesh.

Open Disk Utility, choose the CD on the left side and click "Erase" on the right.
Matt

How to Use Home+End Key on new short usb apple keyboard on XP

How to Use Home+End Key on new short usb apple keyboard on XP
now i use macbook and new short apple keyboard.
it hasn't Home and End key. i try to use Fn + -> , Fn + <-
it cann't do that. How can i set the Fn + <- be Home key
and Fn + -> be End key like on my macbook keyboard
thank you for answer

Easy, no need to be harsh. I might not be a Level 9  Discussions user, but I’ve been an Apple Technician for more than a decade now. So believe me, I know what I’m talking about. Be it OS X Server or emptying the Trash. But even I come here from time to time to learn from others. Well, back to topic and being a little more specific:
The 'My Info' setting always belongs to the first iCloud account you add to an iOS device. In this account you create at least 1 contact, the one you will be using for 'My Info'. You then do the same on your other iOS device using NOT the same iCloud account, of course. You only need to enable contacts syncing in iCloud preferences for these primary accounts. From here on you can use differing 'My Info' on your 2 iOS devices without a problem.
But you may know that you can use more than one iCloud account at a time. Only the primary one will offer all iCloud options like Photostream. But what they all offer is contacts, calendars, etc. So if you intend (and I did) to share these 2 between your devices you can add them using a second iCloud account to both of your iOS devices. This makes it 3 accounts all in all. You could even go further and add another one just for 'Find my iPhone' if you like.
I would’ve used the built-in sharing of Calendar.app instead, but Contacts.app does not (yet) offer sharing contacts with others. That’s why I went with the third iCloud account as a secondary account to both iOS devices.
Apple of course recommends using just one Apple ID for everything to make it easier. But in some scenarios this just won’t cut it, which is even described in one of their support documents.
I hope that now you have an idea what I’ve done…
Good night
Björn
PS: It would be nice if people did not insist on being right. They too can sometimes learn something!

How to add new data entry and display old data in the same screen in SM30?

Hi, Experts:
We need to use SM30 to maintain a table entry. When I click the button of "New Entries", the table screen becomes blank. I can only add new data but not be able to see the old data existing in the table.
How can I have the new line available for me to add new data at the same time see the data currently existing in the table?
Thanks,
Jenny

Hi, thanks for the reply!
Just to follow up for what we did to disable the delete function for maintaining table records. We hided the Delete button by adding a "MODULE disable_delete" code in Screen Painter. So now only adding records to the table is allowed.
Thanks,
Jenny

How to use the "identify" feature in new 6.3.1 airport utility?

how to use the "identify" feature in new 6.3.1 airport utility?
so you can find the basestations in larger networks?

There is a workaround, which is to use Airport Utility 5.6.
I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
Four caveats:
1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
I hope this is helpful information. Took me a while to find out how to do this.

How to use my itunes with a new pc

how to use my itunes with a new pc?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

How to change the url of "Add New Item" of a particular list in SharePoint 2013???

Hi Guys,
How to change the url of "Add New Item" of a particular list in SharePoint 2013???
I need to redirect it into the page where I have created my Visual web part.
Please suggest
Warm Regards,
Tony Joy

Hi,
There are multiple ways to change the form url like javascript, SharePoint designer, custom code, editing default form to have custom web part etc, Please follow the url below that describe diffent methods and steps
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ec2769a0-683c-4023-8804-b596e4f92a3a/change-default-forms-on-custom-list?forum=sharepointcustomizationlegacy
Hope it helps!!!
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. Thanks, Ajeet

How to save data on a graph and then add new data to it

i am currently plotting data on a graph from a physical system. However when i want to add new data to the plot, the old one is replaced. I am trying to do more than one plot on the same graph, where the incoming data is at different times. I want something like Excel where i can just add a new plot to the graph.Can i save the data or freeze it onto the graph or something so that i can add a new plot and see the two at the same time?

> i am currently plotting data on a graph from a physical system.
> However when i want to add new data to the plot, the old one is
> replaced. I am trying to do more than one plot on the same graph,
> where the incoming data is at different times. I want something like
> Excel where i can just add a new plot to the graph.Can i save the data
> or freeze it onto the graph or something so that i can add a new plot
> and see the two at the same time?
As the other post pointed out, there are two objects in LV for plotting,
graphs and charts. If you wish to have a chart recorder that
accumulates data into one or more plot with time, you probably want a chart.
If you push a button and acquire a trace and want to add that to your
graph, you just need to
combine it with the data you plotted before and
update the graph. It isn't the most efficient, but you can easily read
the value of the graph using a local, add another row or column or
element to your data and send it to the graph.
To directly answer your other question, no, the grah doesn't have a
functional interface for clearing, adding, or deleting plots. Instead,
you do that with the diagram nodes and give the graph the results.
Greg McKaskle

How to add new data type

I need to add new data type like SDO_GEOMETRY in spatial Oracle.
I don't mean the User-Defined Datatype but new datatype imbed in the database.
It might be written in C++ or Java but I do not know how.
Any hints and help will be appreciated. Thanks,

> It is not simply defining new VARCHAR3.
I will compare embedded new built-in data type and UDT as part of my research.
What I really meant was what do you want from your new type that a user-defined object can't give you? (Apart from the obvious shortcomings of Oracle object types being addressed, but that could take a while.) You specifically said "I don't mean the User-Defined Datatype but new datatype imbedded in the database" and I wondered what you meant by that.

How to add new data file

Hi Friends,
We have 4 below file systems.
Sybase/TST/sapdata_1
Sybase/TST/sapdata_2
Sybase/TST/sapdata_3
Sybase/TST/sapdata_4
Already we have added one data file each in sapdata_1 and 2. Sapdata3 and 4 are emptry.
How to add new data file in sapdata3 or 4.
Please provide syntax for creating a new data file and steps for the same.
Regards,
Karthik.

Just for the record: you have here the DBACockpit documentation:
https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000571562012E
And this is a sample of the extend to be executed:
Regards,
Victoria.

How to use old nano ipod on new computer

How to use old nano ipod with new computer

Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

How to use Replacement Path Variables to perform Date Calculations

Hi Experts,
Can anyone make me clear about:How to use Replacement Path Variables to perform Date Calculations???????
Thankyou in advance..
shankar

In left panel select the time Dimension
Then hit new variable in that
give the Name and Description for the Variable
In processing by hit Replacement Path
In reference characterisitcs use Calendar Day...
As ur intention is to use it for Date
Then in adjacent tab use
Replace variable with Query / Variable
Then u can use Offset length and offset start for controoling the display of your variable.
Use as single, multiple single, interval, selection option as uwish
HIt okey
and you are good to go

How to use vCloud Director Catalog into vFabric Data Director

Hi,
How to use vCloud Director Catalog into vFabric Data Director.....

When you install Data Director, you have the option of selecting a Global or Organizational installation. When you select Organizational, you have an additional option to specify the vCD instance from which you can get Organizations and Users. This must be set up at installation time.

How to use sequence in MS sql server?

In Oracle DB we use sequence like that:
SequenceImpl s = new SequenceImpl("customer_seq", getDBTransaction());
Integer next = (Integer)s.getData();
setId(new Number(next.intValue()));
But there is no sequence in sql server ,how can I do?
Thank you~~

MS SQLServer have a IDENTITY column property and UNIQUEIDENTIFIER data type that is somewhat similar to Oracle's sequence. I don't know whether your table contain either of these, or you just want to set sequential number to a column.
Below is some info about IDENTITY and UNIQUEIDENTIFIER you may already know since they are in SQLServer Book.
IDENTITY property: You can define IDENTITY property on a numeric column. You can set the seed and increment on this column property very much like Oracle's sequence. The only thing I think it does not have is the "nextval". You can use IDENT_CURRENT function or @@IDENTITY after an INSERT or SELECT INTO to get the last value generated. Of course you can use this value and add the increment to get the next
value but it not the same as seqname.nextval which keep incrementing each time you call it. Getting the current identity value and adding the increment your self will not work for multiple sessions with pending
insert. Another thing about column with IDENTITY property is that you cannot insert value into this column (i.e, omit it in your insert statement values) unless IDENTITY_INSERT is on, but only one table in a
session can have IDENTITY_INSERT to be turned on.
If you don't need to know the next seq value, then IDENTITY work similar to Oracle sequence. Execute select after postchanges or commit will have system generated values. If you need to get next value before insert, Sung suggest using SEQ_TABLE and managing the next value (write a database function to mimic Oracle'
s nextval).
UNIQUEIDENTIFIER datatype: UNIQUEIDENTIFIER is a 16-byte hexadecimal number indicating a globally unique identifier (GUID). The GUID is useful when a row must be unique among many other rows. You could use NEWID() to create a value of type uniqueidentifier or calling some API function that returns a GUID. The advantage of using uniqueidentifier is that the values generated by NEWID function or application GUID are guaranteed to be unique throughout the world. The disadvantage of using uniqueidetifier is that it is long and obscure, random, difficult for user to remember or type correctly. It is 16 byte, which is large compare to other datatype such as 4-byte integer.
Thanks,
Yvonne

XI 3.1 SR3 on Solaris SPARC - using ccm.sh to add new node ?

Hi,
I'm configuring the XI 3.1 SR3 Integration for SAP component on my newly built BOE 3.1 SR3 environment and have a question on the "configuring SAP server side trust" part of the configuration. On page 91 of the Int Kit for SAP guide it states that :-
To configure BusinessObjects Enterprise servers
After you generate a PSE for BusinessObjects Enterprise, you must configure
an appropriate server structure for SAP processing. The following procedure
creates a node for SAP processing servers, so that you can set operating
system credentials on the node level.
Note:
In this version of BusinessObjects Enterprise, servers are no longer
configured in the Central Configuration Manager (CCM). Instead, a new
Server Intelligence Agent (SIA) must be created.
1. In the CCM, create a new node for SAP processing servers.
Give the node an appropriate name such as SAPProcessor. For
information about nodes, see u201CAdding a nodeu201D in the SAP BusinessObjects
Enterprise Administrator's Guide.
2. In the CMC, add the processing servers you need to the new node, then
start the new servers.
For information about adding and starting servers, see the u201CManaging
and Configuring Serversu201D chapter of the SAP BusinessObjects Enterprise
Administrator's Guide.
The trouble is that the BOE S.1 SR3 administrators guide for "adding a node" on page 63 describes the process on windows where the ccm GUI tools is used. On unix however the ccm.sh command line tool needs to be used and looking at the "ccm.sh -help" options I can't see anything listed that could be used to perform this add node procedure.
Can anyone suggest to me how I can setup this new node that is required so I can continue with the XI 3.1 SR3 Integratrion for SAP setup.
Regards,
Brian.
I'm new to BOE so please accept my apologies if this is a basic task.

Hi Seb,
thanks for this. I suppose I'm unsure on this due to me only just becoming involved with BOE, the Integration for SAP document isn't very clear on this process for setting up a new SIA. I checked with the project manager and this needs to be setup to enable their planned usage. I'll take a look at using the serverconfig.sh utilility to create a new SAPProcessors "node".
I'm assuming I can then use the CMC as per step 2 in the XI3 SR3 Integration for SAP guide, page 91 :-
To configure BusinessObjects Enterprise servers
After you generate a PSE for BusinessObjects Enterprise, you must configure
an appropriate server structure for SAP processing. The following procedure
creates a node for SAP processing servers, so that you can set operating
system credentials on the node level.
Note:
In this version of BusinessObjects Enterprise, servers are no longer
configured in the Central Configuration Manager (CCM). Instead, a new
Server Intelligence Agent (SIA) must be created.
1. In the CCM, create a new node for SAP processing servers.
Give the node an appropriate name such as SAPProcessor. For
information about nodes, see u201CAdding a nodeu201D in the SAP BusinessObjects
Enterprise Administrator's Guide.
2. In the CMC, add the processing servers you need to the new node, then
start the new servers.
For information about adding and starting servers, see the u201CManaging
and Configuring Serversu201D chapter of the SAP BusinessObjects Enterprise
Administrator's Guide.
Regards,
Brian.

How to use "sequence" after we add new data ?

Similar Messages

Maybe you are looking for