How to use single sign-on for BCC and Experience Manager

Does anyone have experience in implementing single-sign-on for BCC and Endeca Experience manager for business users.

With the older versions of Endeca commerce stack there is no OOTB support for this. However with Oracle Commerce 11, SSO with BCC and Experience Manager are out of the box. Oracle Commerce 11 is released today.

Similar Messages

How to use single sign on to authenticate

How to use single sign on to use the MS-AD for authentication
I have created an data source which points to the MS-AD and tested
Next how do i add this to the policies.
Thanks
NS

Hi,
Please, specify the products and versions that you are using?
thanks,
Thiago Leoncio

How to Use the language function for assignment and validation

Hi All,
If anyone can explain me in details with example ,how to use the language function for assignments and validations?
Thanks
Arnab

Hi Arnab,
The expression is checked only for the current MDM session.
If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
Try connecting to the DM with the XYZ language.
It should go to the if part rather than else.
Hope it helps.
Thanks,
Minaz

How to use Single sign On in CRM2007 ?

Dear All,
I have created a launch transaction for launching ransactions from R3 (using BOR).
Now, the problem is when I click on the link in WebUI it gives me a popup for entering R3 User Id and only then it allows navigation to R3 transaction.
How do I remove this popup ? I want that since user has already eneterd password for WebUI it should further not prompt him/her for the password. How to achieve this ?
Can we use Single Sign on ? How ?
Regards,
Ashish

Hi Stephen,
I have done the settings as per the OSS notes. But, I am getting the following error while navigating to R3 from CRM (BOR Launch transaction):-
- SSO logon not possible; browser logon ticket cannot be accepted
- Choose "Logon" to continue A dialog box appears in which you can enter your user and password
- No switch to HTTPS occurred, so it is not secure to send a password
Also, after this I get the popup where I have to enter R3 User Id and Password and then it continues.
But, the whole purpose was to remove this intermediate popup.
What settings are missing / going wrong ?
Regards,
Ashish

Integrating AS 10.1.2 and AS 10.1.3 to use Single Sign-on for BI Publisher

Hi Everyone
I was trying to make the following demonstration scenario on the AS and the facilities that can afforded by Oracle to our company:
Note: I have just one machine for demonstration with Win2003 Enterprise
First of all, I need to build a portal for my company, this portal will be published to the web through port 80 opened by Microsoft ISA Firewall (ISA installed on different machine):
1- Portal should be integrated with oracle forms and reports with single sign-on
2- AS, should have single sign-on authentication to work on port 80 only.
3- Portal should be integrated with BI Publisher 10.3
For the objectives mentioned above i have done the following:
1- install AS 10.1.2 (infra and mid-tier) on the same machine with default installation options (http port 7777 for infra and port 80 for MT). (objective 1 = done)
2- to make sso works on port 80, i have used webcache as reverse proxy for sso, and it's done but i have error (WWC-41400), but it doesn't affect login on portal, and that is my first problem.
3- To have BI Publisher to work and authenticate users using single sign-on on port 80 (from outside), I had to install AS 10.1.3 (http on port 7779) on the same machine mentioned above, and then deploy BI Publisher on it, and that was ok, but problem is how to make use of single sign-on to authenticate people listed in oracle internet directory of INFRA installation mentioned above to use BI Publisher on port 80 only.
So, could anyone please guide me in problem 2 and 3.
Thanks in advance.
Anas

a couple of parameters not configured inside the Tomcat files. Now the SSO is working.
SNC is not required for sso in bi 4.0
http://wiki.sdn.sap.com/wiki/display/BOBJ/BI4IntegrationintotheSAPEntreprisePortal+7.0.x
http://wiki.sdn.sap.com/wiki/display/BOBJ/SetupofSAPSSOServiceinSAPBOBI4.0+CMC
Best Regards

How to Create Single Sign On for Yahoo

hi,
i know how to do SSO for SAP R/3 SYSTEM.
i want to know how to connect yahoo system using SSO
let me know procedure how to do that
regards
prakash

Hi,
Yahoo is already single sign on. You just login in home page and you can access your briefcase, photos, etc...
you don't require to do anything special.
If i didn't understand eloborate...
--Ragu

How to do single sign on for multiple webservices in flex application

Hi Experts,
I have created a flex application and using few webservices in that application. When I run the application its asking logon details for each and every webservice I used. However I want to do single sign On without providing logon details for each and every webservice.Please suggest me.
Thanks and advance.

Hi,
if yout projects are deployed in their own Java EE context root then you have multiple applications, though logically you count them as one. Use OSSO or Oracle SSO (where OSSO should be fine since all deployments share the same instance)
Frank

Use single sign on for multiple portal domains

Is it possible for a user to sign on once to a domain, and then be able to access other domains. What I'm trying to do is have one user registration page/login page, but use different portal server domains to present different sites, while at the same time having a type of single sign on, once a user has entered his credentials. Thus my registration process will create a new ldap user in an external directory, and i can then just point all the different domains to that External Ldap directory.

I wouldn't recommend this because it would affect performance plus there are potential other issues like conflict that you would run into ..
Everytime a user logs into a new session is created for him and this means a user might have multiple sessions on the server. The cookie that is also set is dependent on per portal domain so it might not work ..
An alternative approach might be to have multiple roles and then customize the role for different views. You can modify the membership code in such a way that based on certain criteria you can assign him to a particular role, equivalent to your domain. However the problem could be if you want to provide delegated admin, currently the delegated admin is only at a domain level.

How to use wsit with jeveloper for developing and testing web servises

hi, all. Just want to ask one realy simple quastion.
I'm new with web servises, so my question may be doesn't fall well into this section , but this community looks friendly for me and i hope to get some usefull links and advises.
First of all could anybody say me if i'm righ or wrong with the following suggestions:
1. What is the principal difference between axis 2 and wsit products? Do i understand right that they both extend or support so called jax-ws2 API and represent different approaches in that (are they competitors?), or this products serve for different sakes at all and could be used together? I want to understand without much digging how these products correlate with each other...
2. If i'm right what is oracle favor? And if oas standard supply doesn't include wsit, how to install and use this product for creating interoperable web servises in jdeveloper enviroment? ...or jax-ws 2.1 wasn't included in oc4j v10 and will be the part of v11 only?
Thanks in advance. Alex.
Message was edited by:
Timin
Message was edited by:
Timin

Both Axis and WSIT are not Oracle products - so I'm not exactly sure why would you post the question here.
JDeveloper has native support for JAX-RPC based Web services development in 10.1.3 and JAX-WS support in 11 - check out the online demos linked from the home page to see these in action.

How to use an external drive for windows and mac

I recently got an external hard drive (2 TB seagate expansion) and I need to be able to use it with both my mac and my windows computer. I have read numerous forums and tried downloading various third party programs but nothing seems to work! One of the things i have read was to create a partition on the drive, this is easy enough and i did try it so i do have one side i can add stuff from from windows and one side i can add stuff to from my mac but then i cant access the other side. So say i need to get a file from my mac to my windows. I add a file to the mac side of the partition from my mac but then when i plug it into windows i cant retrieve that because its on the mac side of the partition (and vis versa). Is there some sort of easy way around this? or some way in which i can format the drive where i can move files back and forth from windows to mac without any expensive third party programs?
Thanks!
Bryan
PS. I did notice when i originally got the hard drive i had a bunch of files on it that were added from windows. When i plugged it into my mac i could see and copy these files but i could not add new files. Is there anyway to get around this "read only" type formate if i were to reset my drive back to its factory settings?

Three ways to go;
Repartiton the drive (1 partition) as MBR and with FAT32 file system. This is readable and writable by both Mac and Windows, but has a file size limit (which I think is 4GB).
The alternative is to leave the drive formatted as NTFS for Windows (this is not normally writeable from Mac) and employ a third-party software application which can write to NTFS. NTFS-3G, Paragons NTFS for Mac and Tuxera NTFS have all been recommended elsewhere.
Or you can repartition as GUID with HFS+ (Mac OS Extended Journalled) file system. This would not normally be accesible to the Windows machine, but once again there is 3rd-party softwsre available to enable Windows to read and write to it. MacDrive is the only one I'm aware of, but there are probably others.

How to use single JSP page for multiple users.

Hi ,
I am doing messenger kind of program using JSP and tomcat server.
When i type message it is showing in the some div. If some other person request for the same page by giving my IP address and jsp page, he should able to see what i have typed on page so far.
how can i do that one . can any one guide me .
Thanks in advance.

SuneelGoodatJava wrote:
Hi ,
I am doing messenger kind of program using JSP and tomcat server.
When i type message it is showing in the some div. If some other person request for the same page by giving my IP address and jsp page, he should able to see what i have typed on page so far.
how can i do that one . can any one guide me .
Thanks in advance.HTTP is a request/response protocol. You can't do what you're suggesting without "pushing" what you type to all the other users. That's not the way HTTP works. Maybe an applet and servlet.
%

How to use single web form for multiple secure zone signup?

I have multiple secure zones in my website. I want to sell membership of secure zones to users of my website. I want, users signup for multiple secure zone of their choice and submit payment. Is it possible if can you please explain a bit or refer me to an doc about it.
Thanks a lot for your time,

I realize this isn't likely, but do you know of a way to allow the user to select the secure zone to be registered (e.g. from a list of multiple secure zones or entering ID of one sz into a text input) from within a single web form? I wonder if this can be passed in through a parameter in the action URL or through a special system field.
Thanks

How to use the Smart Cover for FaceTime and Videos?

Hi,
I bought a new iPad recently with a Smart Cover. I find the Smart Cover very good for typing, at the low angle. The angle is very nice, it feels very comfortable and it allows fast typing. But then what is called the FaceTime/Video angle seems way too steep for me, like 80 degrees. I need to be like 3 meters away, at least, to watch a movie correctly or to be captured by the FaceTime camera. I'm rather tall but still, I don't really get it. I thought for the first couple of days that I was folding the cover in a wrong way but it seems not.
Am I the only one to experience this issue? Or is there another way of folding the cover to get a correct angle? I haven't tried another Smart Cover but I would doubt that mine is faulty. But if it is how the Smart Cover is designed, I'm surprised that Apple went with that, I mean, I can't see the use of this angle, if you need to be so far away from the iPad. I actually bought one (and the Smart Cover) to use it as a support for books/tutorials when I'm coding on my Mac, and I'm finding that I can't find a place for the iPad with the cover on my desk because it ends up to be too steep anywhere I place it...

godbout wrote: ... Am I the only one to experience this issue? Or is there another way of folding the cover to get a correct angle?
My experience is the same as yours (and everyone else's, I suppose.)
Other than the various ways you can fold it, Smart Cover is not adjustable.
This link shows what Smart Cover can do.
You have already found the best workaround for Smart Cover: reposition yourself, the iPad, or both so the camera view shows what you want in the picture.
You decide the best location for your iPad while you capture video. Because iPad connects wirelessly, you need not worry about dangling cables.
Message was edited by: EZ Jim
Mac OSX 10.7.3

Ldap and Single Sign on. for AACG and CCG

If any body done ldap integration.
Here are my problems.
1) No clear documentation for AACG ldap configuration for GRCC. There little bit of documentation on GRCM but GRCC.
2) CCG - also no clear documentation. just one screen what values it is neeed.
3) does OID supported?
4) can I used corporate AD for user integration.
The Documentation doesnot talk about
a) what happens if ldapis enabled can I login with admin account locally if ldap doesnot work?
b) when ldap is enabled.. what role is assinged...
thanks,
Narender

If you have a look at My Oracle Support (support.oracle.com) Document ID 741001.1: GRC Suite Support Matrix
It looks like only EGRCM supports LDAP/OID to some degree. Also I would suggest to open an SR to make sure that the GRC products you want to use LDAP for are supported.

Best practices followed in using Single Sign-On

Hi Everybody,
Now here is the toughest situation I have been facing on my project where I have to decide on how to use single sign-on(SSO) or whether SSO is the right solution for my problem.
Here goes the problem :
I have been developing a dashboard for my client using APEX 3.0.0.00.20 on Oracle Database 10g Enterprise Edition Release 10.2.0.2.0.
Now the client do not want to create new logins for the end users on this new APEX application.
After going through several threads in the forum about SSO I thought SSO might get me there but the confusion is how exactly SSO works for a situation like this.
As per my understanding SSO would act like an intermediary staging place which would take the existing logins and associate with the APEX logins(please correct me if I am wrong).
Also when I requested my DBA to install the SSO SDK as per the link http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html#INSTALL I got a reply saying SSO is deprecated and now it is mod_osso.
I need your thoughts and opinion on what the best practices being followed in projects like these.
Thanks in advance.
Raj.

Teku,
* You install the SSO SDK into a schema in the Application Express database.
* You register the APEX site as an Oracle AS SSO partner application using the facilities of the AS Login Server which produces some "keys".
* You take those keys and plug them into a script that you run in the APEX SSO SDK schema.
* You create an APEX application and set its authentication scheme to SSO using a wizard or the authentication scheme edit pages in the Application Builder. (From this point on, you can create or modify any number of applications in any workspace (in this APEX database) to use SSO just by using the authentication scheme wizards/edit pages in the Application Builder.)
*You run the application and get redirected to the login server.
*The login server authenticates you based on username/password in OID.
*The login server then redirects back to the requested page in your application.
Scott

How to use single sign-on for BCC and Experience Manager

Similar Messages

Maybe you are looking for