How to use SM7.0 to support an upgrade?

We have several upgrades for ECC5.0->ECC6.0, CRM4.0 ->CRM7.0, etc.
We have heard that SM7.0 can support the upgrade but do not know how.
Would you please share your experience? Blogs and links are highly appreciated.
Best regards!

Hi Linda,
Please check the below blog to find the details about creating a project. Select Upgrade project as your project type.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417700)ID0726686550DB00233069886735880120End?blog=/pub/wlg/7317
This is not mandatory for doing any upgrade. You can always restrict the use of your solman for the creating key and maintenance optimizer function only.
Rajeev

Similar Messages

How to use SM7.0 for SCM?

Gurus:
Is there any relationship between SM7.0 and SCM except monitoring SCM using SM7.0?
If yes, would please give some examples how can SM7.0 work with SCM? Thanks!

Hi Linda,
Please check the below blog to find the details about creating a project. Select Upgrade project as your project type.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417700)ID0726686550DB00233069886735880120End?blog=/pub/wlg/7317
This is not mandatory for doing any upgrade. You can always restrict the use of your solman for the creating key and maintenance optimizer function only.
Rajeev

I want to know what's the conference call in community level and how to use it

i want to know what's the conference call in community level and how to use it

Welcome to Apple Support Communities
Conference calls are got when you reach level 4. Sometimes, ASC hosts may do a conference call about something related to Apple Support Communities. You will be notified through mail or through the "Using Apple Support Communities" forum.
The last community calls were only for level 6 and higher users, so it's possible that you don't get invited to any until you reach level 6

I downloaded the Italian Dictionary 3.3.1 Add - On, but I have no idea how to use it or activate it, or even where to find it on the laptop, can anyone help me with this?

I downloaded the Italian Dictionary Add On 3.3.1 but I can't find it on the laptop, or on the taskbar.
I am running Windows XP Professional, with a yahoo toolbar for Mozilla Firefox 2.1.3.20100310105313
I have searched for the Add On via Tools>Add Ons, the Dizinario Italiano appears at the top of the Add Ons, but I don't know how to access it.
I hope that helps.
J

For details of how to use it see https://support.mozilla.com/kb/Using+the+spell+checker

How to use the App Store wish list

I Can't figure out how to use the App Store wish list...if anybody can answer this for me I would love that.

Hi dlissor,
The following article describes the Wish List and how to use it -
iTunes Store: How to use Wish List
http://support.apple.com/kb/HT1368
Thanks for using Apple Support Communities.
Best,
Brett L

How to use MS GSM support in JMF?

Hello,
Anyone has idea how to use the MS GSM encoding and decoding support in JMF.
As Microsoft GSM is different from the standard GSM 6.10, however, JMF can both read and write MS-GSM coded file (in .wav wrapper). Here I would like to know whether it is possible to have real-time encoding and decoding in MS GSM format?
This is very important for me as I need to use PocketPC for live audio streaming and it only support microsoft GSM coding.
Thanks in advance
/h.b.

Hello,
Did you (hotbee) eventually solved your problem ?
I'm writing an application which listens to a GSM 06.10 audio stream from a multicast socket.
The application that sends the audio is written in C++ and I don't manage to find the correct parameters for JMF to be able to decode it...
Here is the C++ code that encodes the audio :
m_WaveFormatEx.wfx.wFormatTag = WAVE_FORMAT_GSM610;
m_WaveFormatEx.wfx.nChannels = 1;
m_WaveFormatEx.wfx.nSamplesPerSec = 9920;
m_WaveFormatEx.wfx.nBlockAlign = 65;
m_WaveFormatEx.wfx.wBitsPerSample = 0;
m_WaveFormatEx.wfx.cbSize = 2;
m_WaveFormatEx.wSamplesPerBlock = 320;
m_WaveFormatEx.wfx.nAvgBytesPerSec = (m_WaveFormatEx.wfx.nSamplesPerSec / 320) * 65; Is JMF (Windows performance pack) able to decode this ?
If so, what is the AudioFormat I should return from my custom SourceStream ?
I tried quite a lot of parameters (GSM, GSM_MS with various combination of parameters), but couldn't get an audible sound... :(
Thanks for any help !
Julien

No support for pse4, need help with help and everything else.What's a layer? How can I get help PDF from CD? I don't have a clue how to use this. I have a Macbook pro.

Need help with help pse4 not supported by adobe. how to do topics not available and I have never used any thing like this. Help says there is a download but have not been able to get it. What's a rookie to do ? Is there somewhere I can go to find out how to use PSE4?

The internet is overflowing with tutorials on PSE. Just google what you want and include Photoshop Elements 4 as part of your search term, or go to the library and they may have several different books on PSE 4. For PSE 4, you won't find a mac specific book, but that doesn't matter because the editor is the same on either program. Just substitute Command for Ctrl and Option for Alt in the keystrokes, and ignore anything about the organizer.
Some popular sites for learning elements:
http://www.photoshopelementsuser.com/
lynda.com
eclecticacademy.com
youtube has a lot of video tutorials, too.

HT4561 how to use mac os x 10.6.8 support to facetime

How to use mac os x 10.6.8 support facetime

Hi.
Purchase Mac OS X Lion v10.7 (or OS X Lion Server) at the App Store.
Make sure your Mac meets Lion's requirements before purchasing.
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OSX v10.6.6 or later (V10.6.8 recommended)
7GB of available spare
From here > Apple - OS X Lion - Technical specifications
A must read before upgrading to Lion > Lion upgrade questions: Apple Support Communities
You can access the App Store from your Apple menu, your Dock, or your Applications folder.

How to use B540P HDMI in? Lenovo tech support was not helpful

I just bought a B540P all in one which has HDMI in/out connections. However there is no description in user manual on how to use it. I was hoping to connect an old desktop computer to the HDMI in, and use the all in one as an LCD monitor for my old desktop. Is this doable? How? I assume with the HDMI in, I can connect it with any HDMI sources, such as a DVD player or a game machine. Can anyone help me?
I called Lenovo tech support line, and got no help from them. Basically they have no idea, and told me this is the first time they heard of this question.

hi puffercow,
Thanks for posting and welcome to the community.
I really sorry to hear that our supprt team has not been as helpful as we do expect better from our support centres. I'll see what I can do to address this situation to ensure the the support teams are equipped for the future.
However regards to your issues the B540 is equipped to have the HDMI to either use it as and internal or external source. What you need to to do is ensure that your desktop is connected with the HDMI cable and connect it to the HDMI-IN input on the back of the B540P. Powerup the the B540P as well as your Desktop. Once the B540P is loaded, you will then need to switch the display. (See illustration below)
If you not notice on the B540p, on the left there is a symbol with arrows circling each other. (Described in red cicle above). press that to flip the view from the B540p desktop and your connected to HDMI desktop.
hope this helps and please do post your results.
regards

How to use .MKV and .ISO with Premiere Pro? They are not supported.

Hi all. My brother in-law sent us two .mkv videos and a DVD .iso he wants me to use in a video I am cutting for him. The only trouble is, I've no idea how to get them into a format PremPro can handle.
I've searched and the only solutions I have found are infinitely complicated for me. Avisynth is certainly beyond me.
Anyone know of a way to convert .mkv (info lists 942x720 H.264 4:2:0 YUV MPEG4 AVC) into something useable?
Same question for an ISO file.
Thanks much
By the way, this is not for anything 'important' nor am I getting paid, so I have no budget tp purchase software. I am sure there must be a free solution.
I tried this trial version software...
http://www.moyea.com/import-flv/
But it would NOT install. It just errored in a loop and was unable to find or understand I have CS5 PremPro.

Can anyone explain how to use VLC to transcode? The settings are endless and NONE look correct. Everything is about coverting and shrinking and that is not what I want.
I have looked into this so many times and cannot find how to do it. I know it must be simple, but clearly I am blind.
What I need is to take whatever is inside that stupid MKV wrapper and extract it. Transcode it. I have been trying for A YEAR now and have never been able to find a solution.
I'm on a PC and unfortunately, there are free solutions for a MAC. But that won't help me.
EDIT: One option I see is tsMuxer! But which setting for Output? I can choose...
TS muxing... or M2TS musing... or Blu-ray disk... or AVCHD disk... or DEMUX
To explain more, I have a Blu-Ray I purchased and want to add the audio from my laserdisc, since the remixed audio on the disc sucks (hard). I'll also add English subtitles. To be clear, this work is for ME for my own personal use.
Here is a screen grab from tsMuxer. Which to choose? I will place the audio and video in Premiere Pro. Sync the old Laserdisc audio up and then EXPORT to Adobe Encore to burn a new BD.

How to change in NOTIF_CREATE - Create Support Notification

Hi
I want to add the following thing in the NOTIF_CREATE
1. Person Responsible-when i use to create message in notif_create my name is not appeared in the F4(I have tried in IMG-Service desk-BP ,but my name is not appeared there)
2.How to create new category?
3.How to use E-mail function in Create Support Notification?
Please help me
Regards,
Neni

Hi
Thanks for u answers,
1. I had already created the BP but still my problem is not solved
2. I am geting this problem-choose the key from allowed name space
3.Can you please tell me what i have to do in in Action profiles
Thanks for ur reply
Regards
Neni

Re: [SunONE-JATO] Re: How to use a tiled view without a model

I'm not sure what is different for you now. You still parse the string
and put it into a data structure. Before the data structure was a
vector, in JATO its just a model with a "hidden" data structure (a hash
map).
MVC only really comes into play when you talk about where your write
this code, and where the data structure is being stored. So really, JATO
takes care of half of the MVC'ness of it all (where the data is store).
You just decide where to be the code to populate the model.
Make sense?
Is there something different required of you in JATO in this scenario
that I am not grasping?
c
Hoskins, John D. wrote:
Thanks for the feedback.
The problem I was solving involved a single string, which contained
delimited subsets of information.
The string looked like
this:"time|analyst|description|time|analyst|description|..."
In ND, I parsed it apart into it's components (time vector, analyst vector,
description vector), populated the repeated.
With JATO, how would I make a model for something that doesn't have a
database component like this?
I'm pretty new to this MVC thing, so bear with me.
John D. Hoskins
Telephone & Data Systems
Application Development & Support
Voice: 608.664.8263
Fax: 608.664.8288
Email: john.hoskins@t...
-----Original Message-----
From: Craig V. Conover [mailto:<a href="/group/SunONE-JATO/post?protectID=219212113009229091025149066024064239039098031198039130252055210">craig.conover@s...</a>]
Sent: 6/26/2002 3.22 PM
Subject: Re: [SunONE-JATO] Re: How to use a tiled view without a model
I guess the only thing "weird" (for lack of a better term) about what
you are doing is that your are populating the model on the "display
cycle". Typically, the cycle goes like this:
Request -> populate model -> update data store -> retrieve data to
populate model -> display data
some of the above steps are optional but hopefully you get the point I
am making.
So what you are doing is:
Request -> populate model/display data
If it works for you, then it's not necessarilly wrong. But I would
probably have my model populated before I forwarded to the target
(displaying view bean) or at a minimum, in the begin display event of
the view bean or the tiled view, but not during the iteration of the
tiled view.
c
jhoskins wrote:
Craig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- Craig V. Conover wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Craig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- "Craig V. Conover" wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

How to Use document.Lines.SetCurrentLine

Hi there, due to an enormous amount of time spent on this issue, I thought I would share how to use the SetCurrentLine method as posted to me by SAP support:
It seems very cumbersome, as I have now to do an extra Recorset look up to get all the lines if I want to get the correct index - but at least it works (hopefully).
Daniel
SUPPORTS MESSAGE ****
the way the SetCurrentLine works is as following:
You do not have to use neither the LineNum nor the VisOrder as your
parameterfor the setCurrentLine method.
The system will use the corresponding index (starting at zero)linked to
that line when running a query on the database and sorting the lines by
LineNum.
#,,DocEntry,, Item ,,LineNum,,Price,,VisOrder
1,,11669,, A1001,,,, 600,00,,
2,,11669,, A1003,,2,, 3,00,, 2
3,,11669,, A1005,,3,, 600,00,,1
See example above, that is the result of querying the database on that
sales order and sorting by LineNum.
The order in which the items are displayed in the application is based
on the VisOrder. In this example items are displayed A1001, A1005 amd
A1003.
In order to update Item A1005 I will need to create a recordset, query
the database and then loop the recordset to find the corresponding item
and then use that index from the recordset to set the value for the
SetCurrentLine method. In the example above index 0 from recordset
points at item A1001, index 1 points at item A1003 and index 2 points at
A1005 so your code should use setCurrentLine(2) to update item A1005.
If you try to use LineNum (3 in this case) you will get an error message
as index 3 does not exist in the recordset collection ( only 3 items
with indexes 0,1 and 2). If you use visOrder 1(for item A1005) then the
system will update item A1003 as 1 is the index for A1003 in the
recordset.
END OF SUPPORTS MESSAGE ********

Hi Curtis,
Your situation sounds a little different to mine, in that I know the LinNum of the documentline that I need to update - that is what the lineNumber variable is...
To update all the rows, I guess you would just iterate through all the lines sequencially (ie starting at 0 and ending at document.lines.count:
for(int i = 0; i < doc.Lines.Count; i++)
doc.Lines.SetCurrentLine(i);
// do your thing here...
How do you know what lines you want to update??
Dan

How many users can 1 Xserve support?

I have one Xserve (10.5.2, 2x3GHz, 5GB RAM, 1.34TB RAID 5) that I want to support the following services for my SMB:
DNS, DHCP
AFP, NFS, SMB
Open Directory
Print
Software Update
I also want to have mobile sync'd network home folders, but only for ~/Documents and iCals and Address Books (I don't want everyone's MP3s or family photos).
I occasionally will use NetBoot/NetInstall, but only 1-2 users at once.
I am getting ready to migrate my company to OpenDirectory and 10.5.2 for all users and was hoping someone here might be able to tell me how many users I can reasonably support with one Xserve.
Also, is it a bad idea to have everyone using "mobile" accounts? It seems like it would be less strain on the server to have the occasional sync from users than everyone reading & writing all the time. Also, if anything happened, there would be a local copy and a remote copy of any files.
Thanks.

Rosemarie,
BeehiveOnline currently supports 95,000 users and we have groups on the system as large as 10,000, that is probably about as big as we want to go - remember collaborating with 10,000 users is not an effective way of working - maybe a more open way of delivering content may be more appropriate. Given that the only issues we have with very large groups is the time it takes to run and the email traffic it generates as the large group are processed.
So it is possible to host 10,000 in a group but we need to be warned in advance and work with you to minimise the impact as the group is set up.
Phil

How to use two different versions of Firefox at the same time on Snow Leopard?

I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
Thanks for a great browser!

Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
You can find instructions on this page:
http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
'''A small tip:'''
If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
Firefox\ 3.6.15
I hope that helps someone.
WW

How to use SM7.0 to support an upgrade?

Similar Messages

Maybe you are looking for