How to use SNMP on WRT160Nv2?

Hello,
I would like to do some monitoring tests related to ISP DSL traffic calculations. I suspect it in false traffic calculations.
I would like to know if my WRT160Nv2 supports SNMP and how to access it (SNMP Community String etc.)?
Thank you,
Alexei Cornea

Hello,
Unfortunately I can't use the solution that you suggested.
My Router is doing the PPPoE connection. "Internet" interface is connected to an ADSL Modem that is configured in Bridge mode. Linksys Router's IP is 192.168.0.1/32. Modem's IP address is 192.168.1.254/32. There's no possibility to access this IP from PCs (DHCP 192.168.0.0/28). On Linksys WRT160N it's not possible to route 192.168.1.254/32 to the "Internet" Interface because Linksys router itself don't have an IP from 192.168.1.0/24 and it is receiving it's public/internet ip through PPPoE protocol.
I have connections by LAN on all 4 ports and a few Wireless connections. All devices are doing downloading/uploading.
Unfortunately I can use only the Linksys router as a PPPoE initiator. But, I really need to monitor all the traffic that is passing through "Internet" interface. Developing a new firmware that will support SNMP could be the best solution that Linksys Company can provide.
Please help me with a solution.
Best regards,
Alexei Cornea

Similar Messages

How to use SNMP Agent

Hi All,
Can anybody tell me how to use SNMP Agent to monitor the Access and Identity Servers

Hi Ramesh,
I cannot comment on WebLogic & SNMP - this kind of questions would
probably need to be asked on a WebLogic forum.
If you're looking for an SNMP Manager API though, you may want to have a
look at the Java Dynamic Management Kit (commercial product,
free evaluation):
http://java.sun.com/products/jdmk/index.jsp
Hope this helps,
-- daniel
JMX, SNMP, Java, etc...
http://blogs.sun.com/jmxetc
null

How to use SNMP??

As a j2ee developer , how to use SNMP in our code? it is developer work? or is it administrator work???
thanks

You have to enable snmp manager process to be able to poll your device from IOS itself.
To enable snmp manager enter global config command snmp-server manager.
The SNMP manager process sends SNMP requests to agents and receives SNMP responses and notifications from agents. When the SNMP manager process is enabled, the router can query other SNMP agents and process incoming SNMP traps.
Most network security policies assume that routers will be accepting SNMP requests, sending SNMP responses, and sending SNMP notifications. With the SNMP manager functionality enabled, the router may also be sending SNMP requests, receiving SNMP responses, and receiving SNMP notifications. The security policy implementation may need to be updated prior to enabling this functionality.
SNMP requests are typically sent to UDP port 161. SNMP responses are typically sent from UDP port 161. SNMP notifications are typically sent to UDP port 162.
Examples
The following example shows how to enable the SNMP manager process:
Router(config)# snmp-server manager
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

How to use SNMP to access interface counters for WAN port when not in bridged mode

Hi All,
Can't fault my timecapsule, however just struggling to get one little bit of functionality working. I'm keen to get access to the WAN port interface counter information via SNMP, so I can track total bandwidth/throughput & also volume.
I have no issue getting SNMP to work & can see the 2.4 & 5.0GHz network counters, also total number of WIFI clients, wlan0, wlan1 and bridge0 interfaces. Trouble is none of these are the WAN/external ethernet port.
I see that it is likely that I'm trying to find the vlan1 port, however from what I'm reading this may only be available when the device is running in a routed mode (I'm running in bridge mode).
Anyone able to suggest anything?

Some cable modem you can turn off NAT.. and then use the TC in router mode.. or even use DMZ if the cable router allows that.
Have you ever looked at gargoyle router firmware and its ability to count and quota all clients connecting to internet service.. it is a simply fantastic firmware and can be loaded onto a router that costs $70-130 dollars.. it is 3rd party but very solid if you choose the right combo.
http://www.gargoyle-router.com/wiki/doku.php?id=screenshots

Use SNMP to monitor the power supply status of stacked switches

Does anybody know how to use SNMP to monitor the status of the internal power supplies of a group of stacked Cisco 3750 switches?
The switch stack has three 3750-48PS-E switches inter-connected by Cisco StackWise cable. IOS ver 12.1(19)EAlc. A single IP address is used to identify the switch stack. Every time I poll the OID chassisPs1Status (1.3.6.1.4.1.9.5.1.2.4.0 in CISCO-STACK-MIB), I only got the status for the Master switch of the switch stack. Is there any way to poll the power supply status of other switches in the switch stack?
Thanks a lot!

Sorry to refresh such an old topic - but I am stuck with exactly this: Monitoring power supplies of a stacked Cisco Catalyst 3750-E.
I'm using the exact same OID's as described, but the problem is, the information shown on the SNMP output is not correct.
This morning, a power supply of the first switch failed and switched to RPS. Here the information I got on SNMP:
snmpwalk -v 2c -c public 192.168.1.50 1.3.6.1.4.1.9.9.13.1
SNMPv2-SMI::enterprises.9.9.13.1.1.0 = INTEGER: 13
SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.1006 = STRING: "SW#1, Sensor#1, GREEN "
SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.2006 = STRING: "SW#2, Sensor#1, GREEN "
SNMPv2-SMI::enterprises.9.9.13.1.3.1.3.1006 = Gauge32: 41
SNMPv2-SMI::enterprises.9.9.13.1.3.1.3.2006 = Gauge32: 40
SNMPv2-SMI::enterprises.9.9.13.1.3.1.4.1006 = INTEGER: 59
SNMPv2-SMI::enterprises.9.9.13.1.3.1.4.2006 = INTEGER: 59
SNMPv2-SMI::enterprises.9.9.13.1.3.1.5.1006 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.13.1.3.1.5.2006 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.13.1.3.1.6.1006 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.3.1.6.2006 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.4.1.2.1060 = STRING: "Switch#1, Fan#1"
SNMPv2-SMI::enterprises.9.9.13.1.4.1.2.2059 = STRING: "Switch#2, Fan#1"
SNMPv2-SMI::enterprises.9.9.13.1.4.1.3.1060 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.4.1.3.2059 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.1059 = STRING: "Sw1, PS1 Normal, RPS NotExist"
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.2060 = STRING: "Sw2, PS1 Normal, RPS NotExist"
SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.1059 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.2060 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.5.1.4.1059 = INTEGER: 2
SNMPv2-SMI::enterprises.9.9.13.1.5.1.4.2060 = INTEGER: 2
As you see, both PS1 (for both switches) are appearing normal. It doesn't even recognize RPS:
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.1059 = STRING: "Sw1, PS1 Normal, RPS NotExist"
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.2060 = STRING: "Sw2, PS1 Normal, RPS NotExist"
The first switch's power supply died and now the cable is disconnected. LED's of the power supply are out. And still: The switch happily announces by SNMP it's power supplies are up.
Is this a known bug? If yes, has it been fixed?
Model WS-C3750E-48TD
Firmware 12.2(37)SE1
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}

How to do a SET using SNMP ?

Hi,
I already ask in the forum Advanced Language Topics
http://forum.java.sun.com/thread.jsp?forum=4&thread=320674
but I din't receive any answer so I try here maybe some one could help me on this ... ;-)
I find a nice piece of code on Internet to do SNMP request �
http://membres.lycos.fr/ysoun/index.html
http://membres.lycos.fr/ysoun/sck.zip
It works find to do some GET operations like doing a GET sysDescr (oid 1.3.6.1.2.1.1.1.0).
But I would like to do a SET operation but I could'nt succeed.
First I do a get on an oid 1.3.6.1.2.1.1.4.0 (sysContact) and I get the value "hello" which is find and I would like to set this value to "good bye".
Well I have to say that I don�t know very well the SNMP protocol and I couldn�t figure out where to put the value in order to set "Good bye". Off course I have the right community to do that but I just can't figure out how can I do that ...
Any comment ... help ... ideas ... are more than welcome !!!! Or maybe some better SNMP package to do that???
thanks,
Emmanuel
Here is the code:
the function to set using SNMP ...
public static setSnmpRequest(int snmpPort, int snmpTimeout, String community, String host, String strValue){
 String oid = new String("1.3.6.1.2.1.1.4.0");
 D_SNMP.Message request;
 try {
 InetAddress snmpHost = InetAddress.getByName(host);
 DatagramSocket sock = new DatagramSocket();
 sock.setSoTimeout(snmpTimeout);
 // create pdu.
 //somewhere here I should include my variable "good bye" but I don't really know how
 Var var = new Var(oid);
 OctetString c = new OctetString(community);
 D_SNMP.Integer requestId = new D_SNMP.Integer(0);
 D_SNMP.Integer errorIndex = new D_SNMP.Integer(0);
 D_SNMP.Integer errorStatus = new D_SNMP.Integer(0);
 //For the GET:
 //PduCmd pdu = new PduCmd(Pdu.GET,requestId,errorStatus,errorIndex,new VarList(var));
 //What I would like to do:
 PduCmd pdu = new PduCmd(Pdu.SET,requestId,errorStatus,errorIndex,new VarList(var));
 D_SNMP.Message m = new D_SNMP.Message(c,pdu);
 // send
 byte[] b = m.codeBer();
 DatagramPacket packet = new DatagramPacket(b,b.length,snmpHost,snmpPort);
 byte[] b2 = new byte[1024];
 DatagramPacket p2 = new DatagramPacket(b2,b2.length);
 long startTime = System.currentTimeMillis();
 sock.send(packet);
 sock.receive(p2); // block or ... timeout.
 long time = (System.currentTimeMillis() - startTime);
 // display
 ByteArrayInputStream ber = new ByteArrayInputStream(b2,1,p2.getLength()-1); // without tag !
 D_SNMP.Message m2 = new D_SNMP.Message(ber);
 System.out.println("snmpPing " + host + " :");
 System.out.println(m2.getPdu().getVarList().elementAt(0) + " / time = " + time + "ms" );
 if (debug){
 StringBuffer buf = new StringBuffer();
 m2.println("",buf);
 System.out.println(buf);
 } catch (UnknownHostException ex){
 System.out.println(host + ": unknown host." );
 } catch (InterruptedIOException ex){
 System.out.println("snmpPing "+ host + " : Time-out." );
 } catch ( Exception ex) {
 System.out.println("Error in : ");
 System.out.println(ex);
} the class Var... where somewhere I should be able to set the variable "Good bye" ...
import java.io.*;
import java.util.Vector;
/** ASN.1 grammar for Var:
* Var ::=
* SEQUENCE
* { name Oid
* value CHOICE {Null, Integer, Counter, gauge, Timeticks, IpAddress, OctetString}
final public class Var extends construct implements Serializable {
public Var(Oid o, smi s){
 this();
 valeur.addElement(o);
 valeur.addElement(s);
/** Same as Var(new Oid(oid), new Null()).
public Var(String oid) throws IOException{
 this(new Oid(oid), new D_SNMP.Null());
/** Builds a Var from a ByteArrayInputStream holding a Var Ber coding.
 * Bytes read are removed from the stream.
 * Note: The ByteArrayInputStream must not contain the Var Tag.
 * @exception IOException is thrown if a problem occurs while trying to decode the stream.
public Var(ByteArrayInputStream inBer) throws IOException{
 this();
 decodeBer(inBer);
/** Used only by VarList.
Var(){
 super(smi.SEQUENCE_tag);
 valeur = new Vector(2);
/** Returns the name of this Var.
public Oid getName(){
 return (Oid) valeur.elementAt(0);
/** Returns the value of this Var.
public smi getValue(){
 return (smi) valeur.elementAt(1);
/** Returns the value of this Var as a String.
public String toString() {
 try{
 return ((smi)valeur.elementAt(0)).toString() + " = " + ((smi)valeur.elementAt(1)).toString();
 }catch (IndexOutOfBoundsException e) { // ne doit pas se produire.
 System.out.println("Erreur codage interne type Var.");
 System.exit(1);
 return null;
/** Used smi.decodeBer().
void decodeValeur(ByteArrayInputStream bufferBer, int lgBerValeur) throws IOException {
 int tag = bufferBer.read();
 if ( tag != smi.OID_tag )
 throw new IOException ("erreur decodage tag Oid de Var: byte " + java.lang.Integer.toHexString(tag) +" recu.");
 Oid name = new Oid(bufferBer);
 this.valeur.addElement(name);
 // lis l'objet suivant.
 tag = bufferBer.read();
 try{
 smi _valeur = smiFactory.create(tag,bufferBer);
 this.valeur.addElement(_valeur);
 } catch (IOException e){
 throw new IOException ("erreur decodage champ Valeur : " + e);
/** Custom serialization: Ber coding is written in ObjectOutputStream.
private void writeObject(ObjectOutputStream out) throws IOException{
 byte b[] = this.codeBer();
 out.writeInt(b.length);
 out.write(b);
 out.flush();
private void readObject(ObjectInputStream in) throws IOException, ClassNotFoundException {
 this._tag = smi.SEQUENCE_tag;
 this.valeur = new Vector();
 int len = in.readInt();
 byte b[] = new byte[len];
 in.readFully(b);
 this.decodeBer(new ByteArrayInputStream(b,1,b.length-1));
} the class VarList ...
import java.io.*;
import java.util.Vector;
/** ASN.1 grammar for VarList:
* VarList ::=
* SEQUENCE OF Var
final public class VarList extends construct {
/** Constructs a VarList holding a single Var.
 * @param Var to be held by Varlist
 public VarList(Var v){
 super(smi.SEQUENCE_tag);
 valeur = new Vector(1);
 valeur.addElement(v);
/** Constructs a VarList holding Vars.
 * @param v Vector of Vars.
 public VarList(Vector v){
 super(smi.SEQUENCE_tag);
 valeur = (Vector) v.clone();
 /** Constructs a VarList holding Vars.
 * @param tab array of Vars.
 public VarList(Var[] tab){
 super(smi.SEQUENCE_tag);
 int taille = tab.length;
 valeur = new Vector(taille);
 for (int i=0; i<taille; i++)
 valeur.addElement(tab);
/** Builds a VarList from a ByteArrayInputStream holding a VarList Ber coding.
* Bytes read are removed from the stream.
* Note: The ByteArrayInputStream must not contain the Var Tag.
* @exception IOException is thrown if a problem occurs while trying to decode the stream.
public VarList(ByteArrayInputStream inBer) throws IOException{
super(smi.SEQUENCE_tag);
valeur = new Vector();
decodeBer(inBer);
/** Returns the Var at the specified index.
public Var elementAt(int i) throws IndexOutOfBoundsException {
return (Var)valeur.elementAt(i); // Sans soucis: Var est immutable
/** Returns the number of Var held this VarList.
public int getSize(){
return valeur.size();
/** Used by smi.decodeBer().
* A VarList is in fact an array of Vars.
void decodeValeur(ByteArrayInputStream bufferBer, int lgBerValeur) throws IOException {
Var v;
int lg;
try{
while (lgBerValeur >0){
int tag = bufferBer.read();
lgBerValeur --;
if ( tag != smi.SEQUENCE_tag )
throw new IOException ("error decoding tag Var in VarList: byte " +
java.lang.Integer.toHexString(tag) +" read.");
v =new Var();
lg = v.decodeBer(bufferBer);
this.valeur.addElement(v);
lgBerValeur -= lg;
} catch (IOException e){
throw new IOException ("error decoding Value : " + e);

I read the documentation it does not help me much, (it's generated by javadoc and there is not enought comment to understand the whole thing ... in fact it just miss a sample of SET request and it would be perfect ...
thanks,
emmanuel
PS: I'm going to try the author again
PS: Still ... any help or pakage to do SET request using SNMP are more than welcome ...

How to configure SNMP on all managed client using SCCM 2012 SP1

hi ,
do you know How to configure SNMP on all managed client using SCCM 2012 SP1?

As a side note, I made an interesting discovery last week: the SNMP Service is deprecated in Windows Server 2012. Why would you want to use SNMP on an actual Windows OS though? There are far better ways available to monitor Windows. I'm sure that lines
up with why they deprecated it.
Jason | http://blog.configmgrftw.com

How to reboot Nexi using SNMP (tsMsgSend not supported)

How does one reboot Nexus using SNMP?'
Normally, I reboot IOS gear using:
snmpset -c {private} {switch|router|whatever} tsMsgSend.0 i 2
               tsMsgSend OBJECT-TYPE
                   SYNTAX INTEGER {
                        nothing(1),
                        reload(2),
                        messagedone(3),
                        abort(4)
                   ACCESS read-write
                   STATUS mandatory
                   DESCRIPTION
                           "Sends the message. The value determines what
                           to do after the message has completed."
                   ::= { lts 9 }
But our new Nexi (5000 and 7500) don't support tsMsgSend in various ways:
N5K
Reason: notWritable (That object does not support modification)
Failed object: OLD-CISCO-TS-MIB::tsMsgSend.0
N7K
Reason: wrongValue (The set value is illegal or unsupported in some way)
Failed object: OLD-CISCO-TS-MIB::tsMsgSend.0
Yes, I have the following in the Nexi config files:
snmp-server system-shutdown
How does one reboot a Nexus using SNMP?
--sk
Stuart Kendrick
FHCRC

Hi,
The only way that a device can be reloaded using SNMP is with the SNMP object tsMsgSend
(1.3.6.1.4.1.9.2.9.9).
As per the official Nexus MIB support list, the OID is not supported in NX-OS
Thanks-
Afroz
[Do rate the useful posts]

How to configure SNMP on SG300 using CLI

Hi,
Does anyone know how to configure SNMP on the Cisco SG300 switches? I have the SG300-10P. I am not fully familiar with the new command line interface on this device, it was easy on the IOS but finding it a nightmare on this one.
I put the following command in but it didnt work.
snmp-server view Interfaces interfaces included
snmp-server community ACB123 ro 10.x.x.x view default
I tried to follow the guidelines on the cisco website but thats all Web interface based, i can only access the switch remotely via CLI.
Thanks

Hi Rafik, here is a basic snmp v1/v2 configuration
snmp-server server
snmp-server community test1234 rw view DefaultSuper
This is basically wide open to anyone who knows the password. This should be enough to get you started then you can tweak additional options as you go. Give this a test, see if you can do what you're trying to do then modify this sample to work for your security needs.
-Tom
Please mark answered for helpful posts

How to read MAC from Catalyst WS-C4507R using SNMP

Hello!
I would like to get all the connected mac addresses from a Switch using SNMP. The all ports are set up as a VLAN 10. VLAN 2 is used as management interface.
#sh mac-address-table
Unicast Entries
vlan   mac address     type        protocols               port
-------+---------------+--------+---------------------+--------------------
   2    0013.c3c2.1cbf    static ip,ipx,assigned,other Switch
   2    c42c.030b.c1b5   dynamic ip,other              GigabitEthernet1/1
10    3c62.0078.44a7   dynamic ip                    FastEthernet3/4
10    3c62.0078.44aa   dynamic ip,other              FastEthernet3/4
10    3c62.0078.4b31   dynamic ip                    FastEthernet3/1
10    3c62.0078.4cb7   dynamic ip                    FastEthernet3/2
Multicast Entries
vlan    mac address     type    ports
-------+---------------+-------+--------------------------------------------
   1    ffff.ffff.ffff   system
   2    ffff.ffff.ffff   system Switch,Gi1/1
10    0100.5e7f.fffa     igmp Fa3/4
10    ffff.ffff.ffff   system Fa3/1,Fa3/2,Fa3/4
I used to work with the following string on an old 2950 Switch SNMPv2-SMI::enterprises.236.4.1.8.7.7.10.1.2.1 but this string is not working on the 4500.
Can anyone help me with my issue?
Thank you,
Andreas

Hi kehander,
Thanks for the reply. I tried filling a constant path with the Mac-defined path to a data file on the USB disk (ie "DATA2:file1.dat"). This resulted in the same error message.
I then considered that maybe I was misinterpreting the LV error message, and that perhaps I was supposed to address the file using PC-notation (ie. "DATA2\file1.dat"), even though the app is running on a Mac. No joy with this, but I get a different error msg:
"Error 1430 occurred at Open File
Possible reason(s):
LabVIEW: The path is empty or relative. You must use an absolute path."
Can you share what your reasoning was for your suggestion... I'm not sure I understand why a constant path would produce different results?

How to add vlan virtual interface on a Catalyst Using SNMP

Hi,
I need some assistance in locating the mib/variables to allow me to add and remove vlan
virtual interface on Catalyst 3759G. If I understand correctly CISCO-VTP-MIB can not carry
out this requirement.
Is there another way of accomplishing this using SNMP ?
Thanks,
Zhou

You cannot add a new interface directly using SNMP. However, you can use the CISCO-CONFIG-COPY-MIB to copy a config snippet into the running configuration which can create a new VLAN interface. See http://www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a0080094aa6.shtml for more details.

How to use a Java Resource in my java source

Hello,
I need to know how to use my external JAR I loaded in the database using this line below:
CREATE OR REPLACE JAVA RESOURCE NAMED "MyJar" USING BFILE (BFILE_DIR,'MyExternal.jar');
In fact, I have a Java file using this JAR, but I do not know how to tell to the java source that it have to use this JAR.
==========Java Source importing the Jar===================
package com.gemalto.ws.snmp;
import java.io.IOException;
import java.util.Vector;
import org.snmp4j.Snmp;
import org.snmp4j.smi.*;
import org.snmp4j.TransportMapping;
import org.snmp4j.transport.DefaultUdpTransportMapping;
import org.snmp4j.CommunityTarget;
import org.snmp4j.mp.SnmpConstants;
import org.snmp4j.PDU;
import org.snmp4j.event.ResponseEvent;
public class SNMPAgent
==========================
Could you give the SQL request or loadjava command line permitting to do use my java resource file?
Thks

The JAR is already load by using CREATE JAVA RESOURCE ... or "loadjava -resolve –force -user p/p@SID –genmissing -jarasresource MyJar.jar"
If we can create a resource by SQL or loadjava, how can I use it in my java code?
Edited by: 847873 on 28 mars 2011 06:05
Edited by: 847873 on 28 mars 2011 06:07

Set IP address of L3 switch using SNMP

HI,
I am using cisco catalust 3560-x series swtiches. And I am new to SNMP. I want to assign IP address to interfaces of this switch, using SNMP. Kindly help me. Any help, any sugession, is most welcome.
Thanks in advance
Jeni A

hi,
Thanks for your response.
Our requirement is as follows.
I want to assign IP address to Switch fro my Java Application. I have implemented a Telnet Client Code in Java, by which i can configure IP address in switch from my java application.
But my boss said, Telnet is not secure and try using SNMP to do the same.
When I was searching in Internet, I got this page https://supportforums.cisco.com/discussion/12090896/snmp-how-get-list-ip-addresses-and-corresponding-interface-names
The above thread gives object ID to GET IP address of Switch interface. This Object is Read-only.
In the similar way, is there any object, using which I can SET / assign IP address to switch interfaces.
waiting for your response.
Thanks in advance :)

How to configure SNMP agent for Oracle 10g

Hello,
I've installed oracle 10g in a Windows 2000 SP4 and I want to monitor database using SNMP.
I've already installed Windows SNMP agent but I haven't any idea how to configure Oracle in order to grant SNMP monitoring.
What should I do?
Is Oracle database ready to be monitored via SNMP by default?
Thanks in advance for your help.
Regards,
Carles

Hello,
Thanks for your message.
In fact, I already found this doc in oracle, but it just show executables I have to install and my question can I install these executables.
I've already installed Windows SNMP agent, configured and testedwith disk space checkings, but it doesn't work fine with Oracle.
I launched Oracle Universal Installer and I checked Installed Products, but I haven't found how to install SNMP agents for oracle.
How can I add Oracle Peer Master Agent and Encapsulator to my oracle installation?
Thanks again for your help.
Regards,
Carles

How to configure snmp host in IPM?

Hi!!! I have CiscoWorks 2000 Rwan with IPM. I installed and configure IPM to send snmp traps when the treshold is excedeed. I can see on the graph that it is exceeded but I can not verify that it sending snmp traps.Where to view these traps and how to configure snmp reciver host?
Can I use CW2k syslog analyzer automated action to generate mail when get this trap?
THANKS FOR ANY HELP!!!!
Regards
Enes

Hi,
As you've discovered, IPM can help configure
these traps:
http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/ipmcw2k/cipm25/ug/ipmfaq.htm#62205
But, you'll need to specify a dedicated NMS
server to receive these traps. The following
documentation should prove to be useful:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa5.shtml
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a05.shtml
You can use the appropriate "debug" command on
the router to confirm that traps are, in fact,
being sent.
The traps themselves are defined in the
CISCO-RTTMON-MIB.my and cannot interact
with the CW2000 syslog analyzer automated
action.
Thanks,
Roger

How to use SNMP on WRT160Nv2?

Similar Messages

Maybe you are looking for