How to use SNRO to create daily number range?

Dear all,
I would like to know how to use SNRO to create a daily number range.
We would like to have the following sequence. The first 8 digits are date and the last 2 digits are number sequence. Each day, the last 2 digits will start from 01 again. i.e. <8-digits date><2-digit sequence>
For example, today is 22 May 2006,
2006052201
2006052202
2006052203
Tomorrow will have sequence like this:
2006052301
2006052302
2006052303
Thanks!

Thomas,
I don't there is a automated way of doing as the dates do NOT follow a numbering sequence. What you can do is to create a number range for getting the last two digits every day and manually concatenate the date with the serial number.
However, as you have to reset the counter every day that might be a issue.
Regards,
Ravi

Similar Messages

How to create a number ranges in QM notification?

Hi Exprets
How to create a number ranges in QM notification?
Please help me...
Ram

Deat Thyagarajan,
Notification type 01
Notification cat 05
Parameters
Notification origin General Notification
Catalog profile SAPISR
Early no.allocation 06 Number range
My Notification type 01, I am assined 06 number range. 06 number range have limit 1-100000.
I have used upto 100000. Now how I can extend my number limit.
Thanks for support...
Ram

How to create a Number range?

Hi,
How to create a number range for a field to give our own number for a field?

Hello,
Go to transaction SNRO.
Take a look at these: [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/840ad679-0601-0010-cd8e-9989fd650822#q-13] and [http://help.sap.com/saphelp_nw04/helpdata/en/7b/6eb2aa7aed44ea92ebb969e03081fb/frameset.htm]
Regards,

HOW TO CREATE EXTERNAL NUMBER RANGE IN OM

HI ALL
HOW TO CREATE EXTERNAL NUMBER RANGE IN OM
PLEASE GIVE ME SPOON FEEDING
IT IS VERY URGENT FOR ME
PLEASE PLEASE AND PLEASE
REGARDS

ok i understood u want the img path for maintaing
positions ,jobs , Org units
Path:IMG->Personnel Mgmt->OM->Basic Setting->Maintain Number ranges.
IMG go to Personnel Management -> Organizational Management -> Basic Settings
-> Maintain Number Ranges.
Select subgroup $$O to maintain number range for Org Unit and click on Number range Maintenance. Then click on change Intervals. Now you can create both internal and external number range for Org Unit according to your requirement.
Similarly for Position select subgroup $$S and follow the same process.
Edited by: Sikindar on Feb 7, 2008 11:23 AM
Edited by: Sikindar on Feb 7, 2008 11:28 AM

Create document number range 22 using internal number assignment

Hi friends,
now i am working upgradation project from 4.7 to 6.0. sandbox i created one Asset, After that i posed amount to that asset by using f-90.now i run depreceation in ABAF T code the bellow issue is comming
Create document number range 22 using internal number assignment
     Message no. AA776
Diagnosis
     Processing terminated because the document number range 22 for year 2011
     was set up with external number assignment.
System Response
     For periodic posting of depreciation, you have to create a document
     number range with internal number assignment, since the document numbers
     are assigned from Financial Accounting.
Procedure
     Change the number assignment for the number range 22 from external to
     internal in Customizing for Asset Accounting. See SAP Note 890976 for
     more information.
But no ranges for that particular year having, if any changing that one it s not come edit or deleating
ple any one help me
Regards
Gangadhar reddy

Hi Gangadhar,
after 4.6C the Internal Number Range was changed into external Number Range due to technical requirements.
As the error messages due to posting manual into the affected number ranges could not be hindered in this case with ERP2005 the desicion was made to rechange to internal number range. Note 890976 describe what to do here.
regards Bernhard

Create document number range 03 using internal number assignment in AFAB

Hi Experts,
Where i have to create number range to Depreciation Posting ? Please mentain Transaction code .
I had check T Code:AS08 (No Tick is assign) & FBN1 (Intrenal Tick is assign)
I am doing T Code AFAB
Folowing error coming
Create document number range 03 using internal number assignment
Message no. AA776
Diagnosis
Processing terminated because the document number range 03 for year 2011 was set up with external number assignment.
System Response
For periodic posting of depreciation, you have to create a document number range with internal number assignment, since the document numbers are assigned from Financial Accounting.
Procedure
Change the number assignment for the number range 03 from external to internal in Customizing for Asset Accounting. See SAP Note 890976 for more information.
Waiting for reply
Regards,
Girish

locked. please read the error message and search the IMG (very easy).

HOW TO USE SNRO

Can anybody tell me how to use snro xns to generate sequence no. & later use it in fm NUMBER_GET_NEXT.
Thanks in advance.

Rasheed's answer was taken from here, Re: Generating serial numbers for primary key field and so has been removed. Cut and paste of other peoples answers is not permitted.

AFAB:AA776 "Create document number range ## using internal number assignmen

Good afternoon
I ask for your guidance to see if anyone knows me that is generating errors in the transaction AFAB AA776 "Create document number range ## using internal number assignment", the peculiarity of this is that I'm in an environment that is proving to migrate V5 to V6 ranges in environment QAS is marked as external and no problems to run on v6 change in SAP itself. Test by removing the flag marking for external control and run, causing an alarm is that it does not work as in my QAS v 5 and that I should remove this flag is removed and remove it in all the years this range of numbers is that it can hurt if you make this change.
Can anyone guide me please.
Thanks for the support.
good day

Hello ,
Kindly have a look at the below notes that will help you resolve the
issue :
890976 - Converting closing report to internal doc number assgnmnt
If note 890976 has been applied in your system already (package
level is = or > SAPKH60005), so what you need to check is the
following :
In transaction FBN1, in your company code you should see that the
period and number range in question is ticked as external.
Please untick the indicator for "External" and press enter. If this
box happens to be uneditable then untick the number range for the
previous year and press enter. All other entries will update
automatically.
Here is a brief explaination to why this change has been made:
Before ERP2005(RAPOST2000 exists as of release 4.70)the number usage
was external, because RAPOST2000 internally managed the document number
handling. As this was not possible any more with the New General Ledger
functionality, and as the usage of internal number ranges is much
simpler and more efficient, we changed the number range management
inside RAPOST2000 (and by the way also the new periodic posting report
RAPERB2000).
Please kindly check the attached notes 683313 for your reference.
I hope this provides some clarification.
regards
Ray

I was wondering how to use Dreamweaver to create joomla template? Any ideas or useful resources.

I am embarking on a new project to create a joomla template. I need your ideas on how to use Dreamweaver to create the template. TQ

It's pretty much the same procedure with all your open source CMSs (WordPress, Drupal, Joomla!...)
Start with this 4 Part Tutorial:
http://www.adobe.com/devnet/dreamweaver/articles/dw_wordpress_pt1.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to use CSS to create horizontal nav bar in Dreamweaver CS6

How to use CSS to create horizontal nav bar in Dreamweaver CS6

One of the ways to do it is this: Tryit Editor v1.9
You can also use floats to get something to the same effect.

How to use the dll created by c++ but not write a jni wrapper around

how to use the dll created by c++ but not write a jni wrapper around through a java program. now I can't access that dll like this directly from java.

Your question is unclear. (You haven't said what dll you are talking about.)
But:
If you are talking about an existing dll, then the only alternative to writing a wrapper is to use one of the wrapper generators floating around. Do a search on JACE.
If you are talking about a dll you are writing, then run jah and get the interface to match java right away; then you won't have to write a wrapper.

Creating Multiple Number Range

Hi
I am required to create strings of the following format: XXXXYYYYY. A customized program will read in a string of 4 characters (XXXX) and generate a running number (YYYYY) for it. Every unique XXXX has its own running number range. The strings XXXX are stored in the database. More XXXX could be added to the database in the future.
For example,
TA0100001,TA0100002....
SB0200001...
SB0300001...
Is there a function to create the number ranges? Any advice on how I should approach this problem? Thanks!

Hi,
I will suggest two idea's for the same.
Create one number range object for YYYYY and then append it to XXXX that is there in database, but here the number of strings that you can generate are limited.
Another Idea is to create say 5 Nmber range objects.
And have it like if XXXX is in range1 to range 2 use Number range object1 to get YYYYY.
And if XXXX is in range 2 to range 3 then use number range object2 (Or interval 2 of the same number range object 1 that is if you want only one number range object and have 5 intervals instead of 5 number range objects.) to get YYYYY. With this you will more options for generating the required XXXXYYYYY.
Transaction for creating number ranges is SNRO.
Regards,
Sesh

Steps to create a Number Range.

Can anyone please send me the steps to create a Number Range..Thanks in Advance

Hi,
1) Goto Tcode SNRO
2) select ur concerned OBJECT there.
3) Click on Number Ranges Push Button.
4) then click on Display Interval Button over there.
*****************************************************Other code
Create number range object using OYSN.
Then call the following function modules.
FORM get_next_id CHANGING p_discrep.
DATA: last_id LIKE zrecaudit-discrep,
        quant   LIKE inri-quantity,    "dummy
        code    LIKE inri-returncode. "returncode
CALL FUNCTION 'NUMBER_RANGE_ENQUEUE'
       EXPORTING
            object           = 'ZRECAUDIT'
       EXCEPTIONS
            foreign_lock     = 1
            object_not_found = 2
            system_failure   = 3
            OTHERS           = 4.
IF sy-subrc = 0.
    CALL FUNCTION 'NUMBER_GET_NEXT'
         EXPORTING
              nr_range_nr             = '01'
              object                  = 'ZRECAUDIT'
         IMPORTING
              number                  = last_id
              quantity                = quant
              returncode              = code
         EXCEPTIONS
              interval_not_found      = 1
              number_range_not_intern = 2
              object_not_found        = 3
              quantity_is_0           = 4
              quantity_is_not_1       = 5
              interval_overflow       = 6
              buffer_overflow         = 7
              OTHERS                  = 8.
    CALL FUNCTION 'NUMBER_RANGE_DEQUEUE'
         EXPORTING
              object           = 'ZRECAUDIT'
         EXCEPTIONS
              object_not_found = 1
              OTHERS           = 2.
ENDIF.
ENDFORM.                    " get_next_id
Don't forget to reward if useful..

Error when creating a Number Range

When I use transaction ZNRO to create a number range, I get an error message:
"Invalid call sequence for interfaces when recording changes".
All I did was enter the text and a domain for the numbers. There was an earlier error regarding buffering. It said that I should not use buffering for accounting documents. I am not using this for accounting documents and do not care if numbers get skipped. So I continue through that error.
But after that, the "Invalid call sequence . . ." error pops up.
I searched this forum generally, and with portions of the error text, and do not find any discussion of problems creating number ranges.
The number range I'm created is very simple. I just need "one up" numbers for a custom database used to store custom schedule information.
I'm at release 4.6c.

Here is the error message and text.
I have no idea what it means by "interfaces".
When at release 3.1i, I had no trouble creating number ranges.
<b>Message no. TK 425
Diagnosis
The function you selected uses interfaces to record changes made to your objects in requests and tasks.
Before you save the changes, a check needs to be carried out to establish whether the objects may be changed. This check must be performed before you begin to make changes.
System Response
The function terminates.
Procedure
The function you have used must correct the two Transport Organizer interfaces required. Contact your system administrator.</b>

J_1IINTPR2 object which transaction is creating this number range.

J_1IINTPR2 : Despatch serial Number Excise Group:21
Current Number range is running ,in SNRO but i want to know where this number is generating in data base Tables
and in which sales transaction is creating this number range.

Hi,
This no. range is asigned at J1I9 also,
it will be generated at J1IIN.

How to use SNRO to create daily number range?

Similar Messages

Maybe you are looking for