How to Use Solution Manager to collect Status Reports from Consultants

Hi,
I am planning to use Solution Manager for collecting the weekly status reports from my consultants and maintain it as a repository . Please let me know the best way of doing this in SOLMAN. There should be mailing options too.
BR,
Raj

Hi Rajasan,
to be able to meet this requirement, you need to set up plan working load in admin tab for your resource, they need to update actual data based on the work completion, you will get status of work,
if you require email, you need to set-up scot, then develop a program with execution scheduling
please check and revert
Anil

Similar Messages

How to use solution manager in upgrade projects

Hi,
How to utilize/use the solution manager in upgrade project like R/3,BW,CRM or entire landscape.
if we are upgrading the r/3 4.6c to ecc6 and bw3.5 to bi7.0 how to use the solution manager
please help and thanks in advance.
Edited by: MAHIPAL REDDY on Jan 1, 2009 1:28 PM

Hi,
Check [this document|https://websmp208.sap-ag.de/~sapdownload/011000358700002696532005E/310_320_SOLMAN_URMP_EN.doc]. This will help you to proceed further.
This is a detailed documentation on using Solution Manager for your upgrade project.
This will solve your problem.
[This Pdf |https://websmp208.sap-ag.de/~sapdownload/011000358700000208052007E/Upgrade_FAQ_SolMan_70.pdf]of FAQs on upgrade project is rich in information.
Feel free to revert back.
--Ragu
Edited by: Raguraman C on Jan 3, 2009 5:27 PM

How to set Solution Manager mail the EWA reports

Could anyone suggest me how to setup email for getting EWA report

Hi Bill,
       1. I would assume you have already configured Early Watch to report to Solution Manager.
        2. SCOT configuration done and e-mails can be sent out.
        If so,
       Go to --> Solution_Manager --> and Go to the solution --> Edit --> Automatic E-mail transmission
       and give the e-mail addresses there.
Hope this helps,
Regards,
Krishna

How to apply patches by using solution manager system?

HELLO FRIENDS,
    when i download the patch SAPKB70012 & next level patches from service market place, it says that we have to apply the following packages by using maintenance optimizer(solution manager). here i have solution manager4.0., please any one let me know how to configure the maintenance optimzr and how to apply support packages by the solution manager system.
          Thanks&Regards
           Farkath.C

Hello
Solman will not implement the files you can download the files using Solman. You need to move the downloaded files to application server and implement them for that you need to configure MoPZ
You can go to server market place service.sap.com/RKT in that select Solution manager.
You will have to select the product as solution manager 7.0 and in technology consultants and system administrator you will find the configuration documentations in for for SIM files.
You can use that and learn how to configure the optimizer on the system.
Then you can download the files and implement the same.
Regards
Vivek

How to create a "blueprint" using solution manager?!!

I have been asked to create a 'blueprint" using solution manager!! I have absolutely no clue how this can be achieved using solution manager!! Please guide me on what is to be done.Would appreciate if you donot give me links of help.sap as the same is not making sense to me.
I have to create a blueprint for 20 countries of SAP reports available for FICO. Some of these reports are country specific while others are generic.

Hi Suchita,
You can create blueprint document using SOLAR01 transcation, provided you must have included all the organizational data, business process, master data,,
Follow the path
transaction SOLAR01->Business Blueprint-> Generate Blueprint
You must have created a solution and a project assigned to that solution also.
further clarifications feel to post the query
regards
Naveen
Edited by: Naveen kumar Palanichamy on Jan 2, 2008 7:16 AM

How to monitor BI & PI using Solution Manager 4.0

Hi, we have installed Netweaver 04S SR2 SP11 BI & PI components. We want to use Solution Manager 4.0 to setup monitoring for these 2 systems. Any guide or documentation will be greatly appreciated.
Thanks in advance.
Arshish

Hi Arshish,
To setup monitoring you will first have to include these systems in the system landscape of SAP solution Manager 4.0 in transaction SMSY.
The steps in the order are :
1. Create Server ( Server name ,IP and Fully qulaified Host name)
2.Create Database (Give the database you are using)
3.Then you have to create the system itself. and give the information as required.You will be able to do it when you will go through it.
Then you have to generate the RFC's from solution manager to satellite systems and back.These RFC's have to be trusted.Assign role SAP_S_RFCACL or profile S_RFCACL to the users in SOLMAN as well as satellite system.
Follow these steps and create a Logical component for the system that you have added.
Follow these steps first.More information can be found out on
service.sap.com\solutionmanager
or you can look for the RKT'S on service marketplace.If you need any furthur assistance do reply back.
please award points if found helpful
Best Regards
Amit

Project Management using Solution Manager

Hi,
We are trying to use solution Manager for managing our IT projects - specifically for SAP projects.
We browsed through the existing functionalities that are available and are not able to get info on the following:
___Project Admin tab for Roadmaps :_ __ In the transaction RMMAIN, we are able to define the scope of the activities at each phase and assign team members and track the status of the activity / task.
However we do not have the tab for tracking the planned start date / end date and the actual start / end dates. Similar is the case for efforts.
So not sure how to track these?
Integration of Roadmaps and Blueprints : Once we have defined the project and assigned the Roadmap, we have all the activities that need to be tracked. In addition in transaction SOLAR01 / SOLAR02, we can define the scope and configurations which in itself are a kind of sub projects to be embedded withing the Blueprint and realization phases respectively of the main Projetc Plan.
How to link these Blueprint specific plan and the realization related plan to the main project plan created out of the Roadmap chosen and to track them as one single project?
Synchronization wih ms project : I see only the option to download the plan as an mpp file. But is there any option to upload mpp as well so that the project can be tracked using mpp and synchronized with Solution manager at frequent intervals?
Your answers would definitely be helping us a lot and would be greatly appreciated.
thanks in advance.
regards,
suresh velan

Hi Suresh,
Solution Manager is a Project Management tool. But it is not for Project Planning. If you want to do Project Planning also from the SolMan system, then you have to enable cProjects component of SolMan.
Synchronization between your MS Project and cProjects is possible. But synchronization between SolMan's RoadMap/Blueprint and MS Project is not possible.
In RoadMap, you can capture and track the status of all phase-wise activities as to what is their status. Here capturing date details is not possible.
In Blueprint/Configuration you can capture and keep track of the individual object's blueprinting and configuration activities. Here you can capture the planned/actual start/end dates for each object.
As I said earlier, Solution Manager provides lot of Project Management features, but Project Planning is not possible. For that we have to start using cProjects component in SolMan.
Hope it helps.
best regds,
Alagammai.

Is it a must to use Solution manager for ECC 6.0 upgrade

Is it a must to use Solution Manager for ECC 6.0 (FICO & HR) upgrade? I am told Solution Manager is required only if it has ABAP and JAVA stacks, or involves Enhancement Packages; and could be optional if it is only ECC 6.0 with ABAP stacks.

Hi,
I'm having a difficult time finding some guidance for setting up our R/3 Enterprise system in solman properly, so that I can create the upgrade XML file required to go directly to ERP 6.0 EHP4.
I've set up the R/3 system fine, but when i create a maintenance transaction i cannot for the life of me figure out how to tell it I want to go from r/3 to ERP6 ehp4.
Any docs out there for this?
Thanks!
I figured it out... i had to add the R/3 Enterprise logical components to my system landscape. After that I was able to select R/3 as the initial data in the maintenance transaction and then the system i wanted to upgrade, and then the option to upgrade.
Never mind!
Edited by: Tom Janes on Sep 9, 2009 12:52 AM

CTS+ Configuration for Transporting non-ABAP objects in Portal Landscape using solution manage 7.1 sp8

Hi,
Currently we have cts+ already configured for our portal systems in our landscape through solution manager 7.0.
Recently we had setup a new solution manager 7.1 and need to perform cts+ configuration using this new solution manager 7.1 as we are planning to remove our old solution manager 7.0 very soon.
We are using NWDI system for transporting our portal transports.
Please help me with steps on how to configure cts+ using solution manager 7.1 using NWDI.

Hi Naveen,
Please find given below BBPCRM & SAP_BW version..
BBPCRM 500 0013 SAPKU50013 BBPCRM BBP/CRM Supp. Pack.
SAP_BW 701 0003 SAPKW70103 SAP Business Warehouse Component Supp. Pkg.
This problem is not only with Bussiness process tab (T-Code: Solution_manage) also System monitoring Still i searching solution for this But once we are restarting System that time this problem is not occuring but after some time system is giving this DUMP
Regards,
Suresh

Why use Solution Manager?

Hi,
I wonder if you can help. We have been advised to install Solution Manager in order to manage the upgrade from 4.6c to ECC 5.0, but have also heard conflicting advice that states that this is not necessary and is an overhead.
Can anyone advise if SolMan is worth installing and what the benefits are of running the upgrade through this vs using normal methods.
Many thanks.
Sean

Hi,
Wel solution manager is an awesome project tracking tool.
Say for e.g it will generate reports for the overall testing using which you will be able to know who is testing what is testing and how much testing is compeleted.
It stores all the log for automatic test cases whether ECATT or External (mercury QTP).
I have written several blogs on testing and ecatt and qtp integration can view the same on sdn.
In addition to above if you use solution manager you can get accelerate roadmap documents and also provide you reports which can show you the current progress of your project with time and dates.
Provide e-learning and also can use solution manager as document management system.
If you are not going to use the same,You are missing all above.Decision is your's.
Please reward points if it helps.

Search & Install SAP Notes using Solution Manager

Does anyone have specific documentation on how to search and install SAP notes using Solution Manager. I have read numerous times about this capability but have not found any success finding specific info on how this is done.
Can someone please share their experience? Can you also provide some documentation?
Thank you

Dear Ramesh,
Like what Rajeev has mentioned, you can use transaction tab in your message/ticket for searching for note or even deploying to satellite system.
for this in solman you need to maintain these 2 enties, so that it takes you to service market place.
trxn: dno_cust04
Field Name                             Seq                   Field Val
URL_DISPLAY_NOTE             1              http://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm={&1}&nlang=EN
URL_SEARCH_NOTE              1              http://service.sap.com/notes
Regards,
Shyam.

How to make Solution Manager 7.0??

Hi Experts,
I am totally new to Solution Manager.I have installed it & when it I am checking
System->status->component version--->Solution Manager 4.0
ST Stack is - 15.
How to make Solution Manager 7.0?Which Support pack level I need to apply to make it Solution Manager 7.0?
For EWA,MOPZ Configuration what should be the minimum stack level of ST??

Hello N.Das
Solman 7.0 IS Solman 4.0 . I mean only the name has been changed so it goes with version of Netweaver; nothing more than that. So you have Solman 7.0. right now !
concerning the minimum SP Level for functionalities EWA and MOPZ. There is no correct answer. In your current Level you already have both; but ( and that is especially the case for MOPZ) new features have been added since ST15.
Current latest Solman version is EHP1 ST23.
Depending on what functionalities you re interested in MOPZ you will be able to choose the minimum level required.
If i were you I would go for the last one, especially because it contains new bug fixes and valuable enhancement for MOPZ
On this link you can check what is in what version of Solman: https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000089906&
Regards,
Khalil

How to use application managed entity manager in EJB?

I finish reading The EntityManager Interface in JEE tutorial.
I know I can use container manager entity manager in EJB, but I want to explore how to use application managed entity manager in EJB.
Can I use application managed entity manager in EJB (container management JTA transaction is used)? Where do I should close entity manager if can?
The following is an example from JEE tutorial, but didn't find where to calose entity manager. and can I create mutiple EntityManagerFactory objects and Entity Manager objects to use them in a JTA transaction?
@PersistenceUnit
EntityManagerFactory emf;
EntityManager em;
@Resource
UserTransaction utx;
em = emf.createEntityManager();
try {
utx.begin();
em.persist(SomeEntity);
em.merge(AnotherEntity);
em.remove(ThirdEntity);
utx.commit();
} catch (Exception e) {
utx.rollback();

Seems like a very poor example, the whole power of EJBs is to use Container Managed Transactions so you don't NEED to manage the transaction and the entity manager yourself. What you posted is code I would expect in a non-JEE application, or in a piece of code which requires fine-tuned transaction boundaries such as batched data importing logic.
If I were you I'd research JPA in steps.
a) learn about JPA as an API outside of the scope of EJBs (recommended reading: the book 'Pro JPA 2')
b) learn about Container Managed Transactions in EJBs
c) learn about Bean Managed Transactions in EJBs
Right now you're rushing into c). I can understand that it raises many question marks at this point.

How to use the selection profile and status profile for production order?

Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shi

Hi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM

How to use file manager to copy music to ipod?

How to use file manager to copy music to ipod so can bypass iTunes?

You can't.
There are 3rd party apps that will load music onto your iPod.

How to Use Solution Manager to collect Status Reports from Consultants

Similar Messages

Maybe you are looking for