How to use Special value set with Column clause to display addtional column

hi
can anyone tell me
How to use Special value set with Column clause to display addtional column
how can i use FND POPID and with COLUMN clause ?

Dear Yaseen,
            To get the value in formula cumulative,after you have created the formula for that particular key figure,go to edit and click on tab "calculations".
In that select overall result as 'count all values not equal to zero' and single result as 'count all values not equal to zero' .
And mark the cumulative check box underneath.
I hope you get the desired result and please do me favour .
Sumit goomber

Similar Messages

  • How to use Two main windows with in a page in script ?

    Hi any body explain me...
    How to use Two main windows with in a page in script ?
    with  header data in one main window,
    & Item data in other main window.

    HI..,
    u need to go for <b>SPLITTING THE MAIN WINDOW</b> !!!
    Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
    Here is the procedure !!
    -->Create a page window and assign it to a page.
    Choose <b>Edit --> Main windows</b>.
    A dialog box appears.
    -->Enter values in the fields <b>Area width</b> and A<b>rea height</b> in accordance with the input guidelines for main windows.
    -->Enter values in the fields <b>Spacing</b> and Number in the <b>Horizontal group</b> if you want to use multiple columns. You can ignore the fields in the Vertical group.
    Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the <b>Horizontal and Vertical groups</b>.
    -->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:
    <b>
    Left margin of current column + Window width + Horizontal spacing = Left margin of next column</b>
    In label printing, the field Upper margin also varies from main window to main window:
    <b>
      Upper margin of current main window +  Window height + Vertical spacing = Upper margin of next main window</b>
    -->Enter a value in the field Start position.
    This is a counter. Enter a starting value which is equal to or greater than 1.
    -->The main windows are added to the list.
    -->Save your form.
    reward if it helps u...
    sai ramesh

  • How to use open data set in SAP

    Hi SAP Gurus,
            Could anyone help, how to use open data set in SAP.
          I need to upload a file from Application server (ZSAPUSAGEDATA) to internal table (IT_FINAL).
    Thanks & Regards,
    Krishnau2026

    Hi Krishna.
    These are the steps you need to follow.
    tables: specify the table.
    data: begin of fs_...
            end of fs_    " Structure Field string.
    data: t_table like
            standard table
                      of fs_...
    data:
    w_file TYPE string.
    data:
      fname(10) VALUE '.\xyz.TXT'.
    select-options: if any.
    PARAMETERS:
      p_file LIKE rlgrap-filename.
    w_file = p_file.
    select .... statement
    OPEN DATASET fname FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    *OPEN DATASET fname FOR OUTPUT IN BINARY MODE.
    LOOP AT t_... INTO fs_....
    write:/ .....
    TRANSFER fs_... TO fname.
    or
    TRANSFER t_... TO fname
    ENDLOOP.
    CLOSE DATASET fname.
    Reward points wisely and if you are benefitted or ask for more detailed explanation if problem not solved.
    Regards Harsh.

  • How to use Table valued MSSQL  function in OBIEE

    Hi all,
    Can some one help me to understand how to use table valued function in OBIEE? I want to use a table valued function (MSSQL function, with some input parameter), in the physical layer to pull the data?
    I know for MSSQL Stored Procedure we can write as
    EXEC SP_NAME @Parameter = 'VLUEOF(NQ_SESSION.Variablename)'
    but now I have a table valued function in the query window I can get the data as
    select * from myfunction(parametervalue)
    In physical layer of OBIEE I have tried as
    select * from myfunction('VLUEOF(NQ_SESSION.Variablename)'), but I'm getting error as the NQ_SESSION variable doesn't have a value , but actually I have initialized the variable but still Im getting error.
    Can some one help me to solve this.
    Thanks,
    Mithun

    Follow this link and try yourself. let me know for issues
    Substring instr issue in obiee
    Appreciate if you mark
    Edited by: Srini VEERAVALLI on Feb 20, 2013 8:13 AM

  • How To Use Your Own Router with Out Loosing Verizon's FIOS Services

    How to use your own router with Verizon’s FIOS Service
    First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal.  Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity.  The fiber cable terminates at the Optical Network Terminal or ONT for short.  The ONT converts the optics into a digital signal that can be utilized by ones equipment.  From the ONT your video, phone and internet are provided to the location.  This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable.  It is important to identify and understand the differences of these two setups.  In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
    How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port.  Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router.  There are multiple methods for doing this and I would recommend investigates which one make the most sense.   
    In my particular case the IP signal was provided by Ethernet.  Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge.  This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.   
    The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT.  I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs.  These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition.  At the very least they can point you to the right direction.  Once you have a NIM the rest is rather simple.
    Log into the current Verizon Router.
    Located the router’s MAC address and copy it down.
    Go to the port forwarding section and copy down the Applied Rules. 
    Example:  
    Network Computer/Device: 192.168.1.100:63145
    Application & Ports Forward:  Application UDP Any -> 6347  
    Note: There may be up to three entries for each one of your Set Top Boxes.
    Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
    Example:
    IP-STB1
    Connection Type: Ethernet
    * IP Address: 192.168.1.100
    IP Address Allocation: DHCP
    *MAC Address:                07:73:fFe:ad:8b:3f
    * Things you will need to write down
    Go to the network section and look for the main Ethernet connection.  Select this and then select more setting, typically found at the bottom. Release the current lease.
    Remove the Verizon router
    Install your router
    Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
    Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s  (note their IP’s start at 192.168.1.100)
    Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.  
    Add the port forwards from Step 5 above.
    Clone Verizon’s Mac Address utilizing the info from step 2
    Finish setting up the router in typical fashion.
    Unplug and re-plugin your STB’s and test functionality.  It’s best to try using a widget or Movie on demand function.
    Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.  
    EVERYTHING should be working at this point.

     3 Go to the port forwarding section and copy down the Applied Rules. 
    Example:  
    Network Computer/Device: 192.168.1.100:63145
    Application & Ports Forward:  Application UDP Any -> 6347  
    Note: There may be up to three entries for each one of your Set Top Boxes.G
    Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
    whatever, the STB's start at 192.168.1.100 and icement by 1 for each
    the port addr's will be 63145 alo incrementing by 1
    there is 1 entry for each in my pf list
    however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
    For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
    Why do you clone the mac addr??

  • How to use "Reference Structure" setting in analysis grid item

    Hello expert,
            in Bex analyzer, how to use "Reference Structure" setting in analysis grid item by example?
    Many thanks,

    The variable needs assigned a value, that's why you're getting prompted. When you execute the statement, it's not executing the variable and exec lines.
    Having script output available in a grid would be an enhancement request.

  • How to find out how many recourds in recourd set  with out while loop

    hi
    i want to findout how many recourds in recourd set
    with out useing any loops like
    while(rs.next())
    count+=1;
    like this
    any mathod like(RecoundCount like )
    pls help me
    regards
    kedar

    If you dont want to use a scrollable result set do
    sql="SELECT COUNT(*) AS COUNT FROM TABLE"
    rs=stmt.executeQuery(sql);
    rs.next()
    count=rs.getString("COUNT");

  • How to use the class CL_CTMENU with the method DISABLE_FUNCTIONS

    Hi Friends,
    How to de-activate some functions in the Menu bar?
    Eg: - Sales document
                 Create
                 Change
                 Display
    I want to de-activate "Change"
    In other words: - How to use the class CL_CTMENU with the method DISABLE_FUNCTIONS in my program.
    Regards,
    Hari
    Edited by: Bhatlapenumarthy Hari Krishna on Jun 9, 2008 5:22 PM

    Krishna,
    It is not possible to deactivate the CHANGE option in themenu bar using the method disable_functions of cass CL_CTMENU. This method allows you to deactivate only the function codes of the CONTEXT MENU, which is available only when u press the left mouse button.
    U can use the SET PF-STATUS 'XXX' EXCLUDING fcodes option to disable the CHANGE.
    *****Reward points if useful
    Regards,
    Kiran Bobbala

  • How to use hashtable values

    if i get all lovsession results in to a hash table
    how to use them
    i mean how to use the value of particular field in hash table(lov ).

    I'm not clear what exactly are you looking for? Is it just the printing/reading of values in hashtable or some interaction of those values with beans?
    --Shiv                                                                                                                                                                                                                                                                                                                               

  • How to use audio and mic with multipoint server with out it crashing on you

    how to use audio and mic with multipoint server with out it crashing on you when i use them to make calls thru my station (zero client) at the same time it crashes on me and i need to restart the multipoint is there a setting i may have mist that enable's
    them to work at the same time and if posible can i use a non USB device 

    Look for "Single Sign-on Using Kerberos in Java" in google or on Sun's web site. Maybe this paper will help you.
    Claude

  • How to use Outline Load Utility with local encoding names of dimensions?

    Hi,
    I'd like to load metadata (dimensions members) to Planning classic application via Outline Load Utility.
    Target dimension name has been set in local encoding (cyrillic).
    After execution my batch file I get error that unable to find specified load dimension "????" in target application.
    Batch file has been created to start OutlineLoad in ANSI encoding:
    cd C:\Hyperion\products\Planning\bin
    OutlineLoad /A:testapp /U:admin /M /N /I:C:\Hyperion\TempOtlLoad\otl_tmc_alterna.csv /D:{dimNameInCiryllicEncoding} /L:C:/Hyperion/TempOtlLoad/outlineLoad.log /X:C:/Hyperion/TempOtlLoad/outlineLoad.exc
    TIMEOUT 10
    How to use Outline Load Utility with local encoding names of dimensions?

    Has somebody any idea about my question below ?
    Regards,
    Ed

  • How to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0)

    Hi all,
    I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
    With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
    // I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
    // and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
    Class cls = javax.mail.internet.InternetAddress.class;
    java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
    java.security.CodeSource cSource = pDomain.getCodeSource();
    java.net.URL location = cSource.getLocation();
    System.out.println(location.toString());
    This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
    - I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
    - I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
    - I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
    This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
    Can you please help me ?
    Thanks in advance for your answers,
    Laurent

    I strongly suggest to upgrade to AS 10.1.3 to get this.
    Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
    --olaf                                                                                                                                                                                                                                                                                                               

  • How to use a Web Template with queries from multiple BW Systems?

    Hi all,
    can anybody help me how to use a Web Template with queries (DATA PROVIDER)in it from multiple BW Systems?
    Thanks in advance, best regards
    Frank

    Great! Thanks for the quick response.
    Have you tried this for XMLA datasources created within the EP system also?
    i.e use Web Analyzer to create a view from the XMLA source and use that view within WAD?
    Thanks.

  • How to use AppleScript to set "character fill color" in Pages 5.2?

    For Pages 5.2 on OSX 10.9.3, what is the correct applescript for changing the "character fill" of text in pages. 
    If you highlight text, you do this via your mouse in the inspector by clicking "style," "advanced option (the gear wheel to the right of bold, italics, and underline), "character fill color (clicking on the multi-color circle, not the dropdown menu), and then choosing a color that comes up in the "colors" dialogue box.
    I've looked all over and cannot find how to use applescript to set the character fill color in pages. 
    In some examples (not directly related) I see "character fill" used. 
    In others, I see "colorfill." 
    Basically, I want to use applescript, embedded in a keyboard maestro macro, to change the background color of the text (not the text color itself) to particular colors. 
    Given the changes and updates to Pages this year, and to applescript, what's the easy way to do this?
    Thanks!
    Chuck

    Pages v5.2 still does not include selection-object, or character background color entries in its AppleScript dictionary, as does Pages ’09. Indirectly, using System Events, you can get the text selection in Pages v5.2, but then you can do nothing to change the selection. No assurances as to if or when Apple will mature the AppleScript dictionary support for Pages v5 series.

  • How to use digital av adapter with iphone4

    How to use digital av adapter with iphone4

    you can connect it to the iphone4's connector and then you can start an app which support av out like apples video app and then it will display on the tv connected
    the iphone4 don't support mirror though so only apps which support tv out will work with it

Maybe you are looking for