How to use ssd as boot drive and hdd as storage on a macbook pro 13

Does anyone know how to use SSD as boot drive and have HDD in optical bay as storage on a Macbook pro 13. I mean in that both drives work as one . by formatting using mac software . I would like to run all programs and OS but would love to have my downloads and useless data on run on my 1tb 5400rpm hdd without me have to manual send it there..

Does anyone know how to use SSD as boot drive and have HDD in optical bay as storage on a Macbook pro 13. I mean in that both drives work as one
Each drive mounts as a separate volume. There is no convenient way to make them look like one contiguous volume.*
Franky, with an hdd and a ssd I would recommend you put your home dir on the hdd and leave the ssd for the OS and your key applications. It's relatively easy to do and I think better than moving only portions of your stuff.
How to Move the Home Folder in OS X – and Why
* There are ways to to make musltiple volumes appear as one large drive but I think it is beyond the scope of this discussion and not appropriate to this configuration.

Similar Messages

How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?

How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?
WIndows can't find a better one than the installed LSI Conformed 1394 Hostcontroller

Read and follow the Bootcamp Installation instructions that you were offered to view when you ran Bootcamp Assistant.
Run Bootcamp Assistant again and select the option to download the Bootcamp Support software. Follow the instructions. Then boot into Windows and install the Windows Support software you downloaded and saved.

Can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

stephan ach wrote:
but i read that there are lots of problems with the new macbook pro. i have all my data on ext. la cie hard drive. i wont have a problem reading them?
What problems specifically? If you have a problem you should start your own thread and explain the problem in detail.
External USB devices including hard drives and DVD work fine on the new Macbook Pros.

How to use an external hard drive and copy files to the disk for mac and windows??

please tell me how to copy files to external hard disk and use it for both mac and windows. there is the fat32 formatting bt i dont wanna use formatting because i already have a lot of content on the exteral hard disk. thank you.

It is simplest to have the HDD formatted to noe common to both Mac an PC. ExFAT is one. But to do that will erase all data on the HDD.
If the HDD id formatted NTFS, Mac can read but not write to it. The solution then is to use a third party application such as Paragon or Tuxera which will overcome that obstacle. These applications do have mixed reviews.
Ciao.

How to use an external hard drive for your music storage

How do I use my external hard drive as my storage for music? I have already saved my music on my external and I have my iTunes program on the computer just wondering what is the next step is? Also I want to make sure I do not use my computer's hard drive for any sizable storage.

sorry to butt in, but this appears to be the best thread to pose my question/problem.
i have successfully migrated my iTunes Library to my external hard drive. the last part of the instructions tell me to delete the iTunes music folder from my hard drive to free up space.
however, i've not done this because i would like to keep a reduced number of music files on my MacBook so that i can listen to music when i'm away from my external hard drive.
i've managed to delete the files i don't want stored on my hard drive, and when i open iTunes without the external hard drive, it defaults to the original location. i'm sure this is not good practise, because whilst i can now play music, the information in iTunes is not right.
what is the best way of storing and playing some of my iTunes library on my hard drive, whilst using the external drive as a 'master'? can it be done?
MacBook Mac OS X (10.4.7) 2GB RAM, 120GB HD, 2GHZ

Used safe start to try and fix issues with safari on MacBook Pro but it shuts down right after it stops. What can I do.

Safari kept shutting down and someone suggested trying a safe start to correct issue. All this did was create a new oils sue as my MacBook Pro OS X 10.9.1 system only begins the safe start within lay a small portion of the bar filling and then shuts down. Now I cannot even get back to my regular screen.

artbyval,
what is an “oils sue”?
Have you tried booting into your recovery partition? To do so, hold down a Command key and the R key as you start up. It should eventually show a Mac OS X Utilites menu, from which Disk Utility can be selected. In Disk Utility, select the disk that your MacBook Pro boots from (typically named “Macintosh HD”). Once the disk is selected, press the “Verify Disk” button; if it shows problems, press the “Repair Disk” button. Once the verification/repair is complete, restart normally, to see if you can login as normal. Once you can log in again, see if Safari still has the same problem with shutting down.

Hi, I previously used a PC with the purchased Adobe Creative Suite 6, but it is a disk drive, and I need it for my Macbook Pro. Is there anything I can do?

Hi, I purchased the Adobe Creative Suite 6 on my student pricing for $399. I only had a PC at the time so i've purchased a disk drive PC version. As a student in the Graphic Design industry I've been urged to become a Mac user, thus I now own a Macbook, but cannot use my Adobe programs. Is there someway I can change the license for the PC suite to Mac? It's quite expensive, and a waste of $400 to keep in on a PC I don't use.

Order product | Platform, language swap
Mylenium

Can I use the thunderbolt monitor and a dell monitor with my macbook pro

can I use the thuderbolt 27" monitor and a dell monitor with my macbook pro at the same time?

Yes, if it's a Thunderbolt computer, but you will need to connect another Thunderbolt device (such as a disk drive) between the displays.

I have one 120GB SSD and one 1TB SSHD, how do do I make one of them my boot drive and the other my data drive?

I'm currently upgrading my mid-2010 Macbook Pro 13", I've purchased some new RAM and also a 120GB SSD and a 1TB SSHD (Hybrid SSD and HD) with the intention of using an OWC data doubler to get rid of my dvd drive and place the SSD drive there instead. So after I've placed everything into the Mac, how do I make the SSD my boot drive with the OS on it and everything, and the SSHD where all my data (music, photos etc) are stored?

Youll need to CLONE your internal HD to your target (temporarily) external drive.
1. grab carbon copy cloner or (my fave) superDuper CLONE app.
2. attach target clone drive via USB in an enclosure or HD dock. Firstly format the target (external new) HD in disk utility in “Mac OS extended journaled”
3. clone internal HD to target HD (external) [takes about 40 mins depending on size]
4. Boot ONCE from external (go to sys. preference to boot from external) to TEST the new Clone
5. open bottom (see videos on ifixit or youtube on same) and remove old, install new.
http://www.ifixit.com/Guide/Replacing+MacBook+Pro+13-Inch+Unibody+Mid+2012+Hard+ Drive/10378/1
Done
(FIRST TIME after installing, boot will be SLOW,...normal and ignore that).
Clone APPS
Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)
CCC App
http://www.bombich.com/

Can some please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates? I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my Mac

Can someone please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates? I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my new Mac. I ended up getting a bunch of duplicates. My old Mac has an older version of iPhoto while the new Mac has iPhoto '11. Is that the cause of the problem? Please advise. Thanks.

Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Regards
TD

I have a late 2008 Macbook Pro last updated to Mavericks OS. The screen died and it's not worth replacing. How do I remove the hard drive and use a drive sled to access info I need?

I have a late 2008 Macbook Pro last updated to the Mavericks OS. The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model. I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need? What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases. How can I accomplish this?
My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive. Is there a way to just access just my hard drive without interfering with hers?
I know this is lengthy. Thanks to whoever looks at this and offers advice/instruction.

the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later. A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files.

Can i install windows 7 via bootcamp (MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air. In bootcamp i allocate the partition then i click install and bootcamp will not see the disk.

Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?

I don't know first hand if you can use the Remote Disk option with Windows but as of 10.7.2 you can now use BCAssistant to make a bootable USB (thumb drive or external disk) W7 installer with the Boot Camp drivers installed also. Have you tried that yet?

Creating a Boot drive and a data drives

I have just installed a new 750 GB hard drive into a PowerMac G5, it had a 160 GB drive already, and I left that in there. I would like to use the older smaller drive as the boot drive, and the newer bigger one as the user data drive.
How do I go about doing it to minimize problems? I can clone the older drive onto the newer one, using disk utility. Once I do that, then what? Please give me some detailed steps.
Where do I divide things up, put system and applications on the boot drive, and users on the data drive? What about Library? What about things like etc, tmp, and var? Will I have problems cloning users? Please help

You do not need to clone to the new drive, unless you want to be able to startup from it.
Just use Disk Utility. Select the new drive in the Disk Utility sidebar. If you just want one partition on the drive, you can use the Erase tab to format it. Select Mac OS Extended (Journaled) as the format type. If you want to partition it and format it, use the Partition tab. One possibility is to create two partition, with one partition being about the size of the 160GB startup drive. You can then periodically clone your regular startup drive to that smaller partition to have a bootable backup (very useful for trouble-shooting). The second partition can be the rest of the space. How you partition the drive is up to you...
You should keep your system and library files on the startup drive. You should generally keep your application files on your startup drive, in the Application folder. You may also want to keep all of default first level folders in your Home (user) folder on the startup drive. These are the folders like Documents, Music, Movies, etc. that are created during the OS installation.
Inside these user folders, I have moved my large folders (such as +iTunes Music+ at <home>/Music/iTunes/) to my second drive. Then I create an alias named exactly like the moved folder, and put it back in the original location. When iTunes is started, it should act like the folder was still on startup drive in the default location. Alternately, you can move the folder and tell iTunes where the new location is in its preferences, but I like using the default settings when possible.
You should be able to take similar actions to put your iPhoto library folder and others on your second drive. If you have sub-folders in your documents folder, you can also alias them to folders on your second drive. Essentially, most of your user-created data can be on the second drive, but it will look like a default setup in Finder and to the system.
There are more technical things you can do, such as move your entire user folder to the second drive. You can look at those possibilities as well...

With Lion, How Can I Erase the Hard Drive and Reinstall The System Software?

I plan on buying a used iMac with a Core 2 Duo so that I can run Lion. Since Lion can only be purchased at the Mac App store what if I needed to erase my hard drive and re-install the system software. How can I do this without a DVD with the OS on it like I have for Snow Leapard. I suppose that I could boot from my Snow Leapard DVD and do the erase. Then, I supposed I would be able to download Lion again from the Mac App Store without paying for it again. But, how would you erase a hard drive and reinstall the system software when purchasing a new Mac with Lion already installed and no DVD at all with the OS on it?
-- Kaydell

When someone purchases any Apple computer with a DVD Drive, they should have recieved two DVDs... One contains the Operating System (up to Snow Leopard, Lion no longer ships on DVD) and the other contains the SYSTEM SOFTWARE (i.e. iLife and iWork). To install the software, they just insert the DVD with the SYSTEM SOFTWARE into any compatible Mac and run the installer. There is no need to erase the hard drive to install SYSTEM SOFTWARE. Maybe a friend can let you borrow the SYSTEM SOFTWARE DVD. The other option is to purchase the software via the App Store.
FYI... App Store purchases are linked to the PURCHASER'S APPLE ID. So if you buy a used Mac from a friend and that Mac already has Lion installed on it,that Lion purchase is linked to YOUR FRIEND'S APPLE ID, not yours. So if you want to download Lion again, you will have to enter your FRIEND'S APPLE ID AND PASSWORD. You can always have your friend re-download Lion and make you a DVD copy.

HT1305 how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

Ok, I saw that error in your logic. A Dual G5 2.3 or even a Dual Core 2.3 does NOT use LCS at all. Its air cooled and if anything if the OP is experiencing this problems could be due to possible heatsink paste drying up. He might have to re-apply MX 7 or Arctic Silver.
The only G5's that use LCS are: G5 dual 2.5 from Late 2004, the G5 Dual 2.7 from Early 2005, and lastly the G5 Quad-Core from Late 2005-end of September 2006.
Hope this helps.

How to use ssd as boot drive and hdd as storage on a macbook pro 13

Similar Messages

Maybe you are looking for