How to use standard texts in smartforms
Hi Friends,
How to use standard texts in smartforms, ie in scripts we are using standard texts using tr so10.
thanks in advance,
regards,
sharma.
For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
btw SO10 is just for Scriptform, in smartforms we use text module to replace SO10
Similar Messages
-
Hi..how we enter standard text for smartform using include text
hi
guru
..how we enter standard text for smartform using include text..
i know only using so10 we write text..
in smartform it asking text-object
text-id,
so what values we should give to get textHi,
Do u want to print Standard Text or the Texts that are maintained at the Transaction level.
If it is standard text , then u use text id as ST or if it is Texts that are maintained at the Transaction level then u have to go to that specific transaction and check for that text , then go to text editor ,in the goto menu u have header data where u get the Text id , text name.... , use them in ur smartform in the INCLUDE text.
Further u have the option of text modules in smartforms which act as standard texts, so if u r going for creation of standard texts then its better to use text modules.
Regards,
Shafivullah Mohammad -
How to add standard text in smartforms?
Hi friends,
How to add standard text in smartforms ?
points rewarded soon
Regards
RHCreating the Standard Text:
Go to SO10
1. Enter Text Name. For example, ZABC
2. Text ID ST
3. Language EN
Click on Create.
And enter the Required Information and save.
To include a Standard text in SmartForm.
Follow the steps below:
1. Create a text node in the window.
2. Under general attributes select "Include text" as Type.
3. Specify the fields under Text.
Text Name ZABC
Text Object TEXT
Text ID ST
Language EN.
Hope it helps.
Regards. -
How to use Standard Text in ALV
How to use Standard Text in ALV header part? Can you please help me by giving the answer?
Hi ,
You can read the Standard text using read_text function module and then print in LV header part. -
Need to use standard text in smartforms
Hi,
My requirement is like to use standard text for the address like ...
Company Name
Street, State, PIN
Phone: 111-111-1111
All the above lines should be aligned in the middle and 'Company Name' should be displayed in the bold.
1) I have created the standard text, and included statement in text window as 'INCLUDE XXXX OBJECT TEXT ID ST LANGUAGE EN' but unfortunately it was not displaying anything in the output.
2) I have tried the another method like using the 'Include Text' as a text type in the text window. It was coming but BOLD and center alignment was not coming.
Here my question is why it was not coming in 1) case and if i use READ_TEXT function module will it solve the problem ? in case 2) how can i get all the 3 lines gets center aligned and first line should be bold.
Thanks in advance for your help.Hi Jaya ,
if u wnt ur Addr first line should come in bold letter than for that
u first *** to "sap smart forms : initial screen" there is option 'STYLE' click on that radiobutton and creat ur own STYLE (Zxxx) on there u vl find al ur answer...
hope this vl help u ,
plz reward paint.
regards
wasim
Edited by: mdwasim akram on Jun 11, 2008 1:09 PM -
How to use Standard Text Key in maintenance order header long text?
Dear All,
I have created a standard text key using transaction CA10 and I want to use this in maintenance order header long text. Is there any way to select any standard text key in maintenance order header long text?
Regards & Thanks,
SaifHi
To use standard texts, perform the following six steps:
Select the maintenance order and access the operation overview screen using Goto -->Operation overview.
You can enter standard text keys in this screen or in a detail screen for the relevant operation.
Enter a standard text key in the appropriate field and press ENTER .
If the text is longer that the short text line available, the field Text is selected for that operation.
Check the long text and edit it if necessary. To do this, select the operation and choose Operation--> Long text.
The system branches to the text editor screen. If you also entered a short text for the operation and specified that this should not be overwritten by the standard text, you will see the short text displayed in the first line of the editor. The following lines contain the standard text.
Check the standard text and change it if necessary.
Save the final version of the text and return to the previous screen with Goto--> Back.
Save the maintenance order.
Standard texts are created for your system by your system administrator using the Customizing function.
Regards
Makarand Gurjar -
How to use Standard text in SAP SCRIPTS
Hi all,
Please tell me how can we use the standard text what we have created in SO10 with sap scripts.Hi Gaurav
You can create standard texts using the transaction SO10. Then to insert these standard texts in the SAPScript choose the menu, Insert->Text->Standard and choose the standard text that you want to choose.
Alternatively, you can display standard texts in your SAP Scripts using the command:
INCLUDE ZSTEXT OBJECT TEXT ID ST LANGUAGE EN
where ZSTEXT refers to the Standard Text name.
Reward pts if found usefull
Regards
Sathish:) -
How to use standard text?
hi experts,
i have created a standard text in so01. now i want to use it in my smartform. can anyone help me, plz give the procedure to use that standard text in my form.
thanks in advance for ur responce.Hi
You cannot use two type to the same text .
Either you have to use TYPE as INCLUDE TEXT for standard text
or TEXT ELEMENT for normal text
One thing you can do if u want to print HI WELCOME together
Then you write both things in different text and print it .
Hope this make some sense to u.
Reward if helpful
Thanks
Krushna -
Hello sir
Here the problem is i want get three company adress in the script..
Here i used the satandard text (so10) and created three adress and i went to address window type
There
i written if exgrp =52
<b> include zadress 1 text id language E.
else exgrp=53
<b> include zadress 2 text id langugage e.
this one i did in developement client and i tested and imported threw scc1 its not reflecting while exectuing.
so please tell me how to print the 3 comapny address .. and step by step procedure .
Thankyou
Regars
REDDYHELLO sir ,
I done wt u said but unable to get that address in script .......
Please check the flow once which done by me ......
firsr created 3 texts and went to the adress window there i used insert option gave standard text ...
in the address window i gave
If P_EXGrp -52( &j_1iexchdr-exgrp&)
include text 1
elseif P_exgrp=53
include text 2
else if P_exgrp=54
endif . this the way i used if condition i .......... if i changed the second statement to Only to "else" its printing the only else part exectuting in script .
and by using RSTXTRAN progarm transported my request . and by scc1 imported but iunable to get Please tell me i didnt change the driver progarm .. selection scrrren &J_1iexchdr-exgrp& is one fileld based on this company code should come ..
Please let me know how to get ....wt changes i should make Please
Thankyou,
Regards -
How to use standard text in sapscripts
Hi,
I want to place a part of text to be displayed in my sapscript in the form of a standard text. I want to make the text bold with italics and also want to set a perticualr size to it.
I am new to SAPscripts can anybody please help me with this.
regardshi
Use character formats in the script itself for the specific text. and in it mention font as bold and italic
and in text elements keep the text between <C1>......</> where C1 is your character format
or
create global style with
U can adjust the bold formats in the standard text itself.(se72).
In the standard text give the character formats and apply them in the text editor of ur sapscript as
text between <C1>......</>
In the text editor go to insert -> text elements-> and standard text.
u can give the standard text name there.
regards
prasanth -
ABAP program - How to use Standard Text
Hi.
I want to read standard text. i know there are Fn module Read_text. but not sure how to call in program.
ThanksHI,
check this and pass the required fields
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
id = <id>
language = <langu>
name = <name>
object =<object>
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
tables
lines = itab
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
How to use standard text feature SO10 , dynamic text ?
hi i have to pass an email containing some information, information contains employee name and number , that I have to place at runtime in the message which is created in the SO10. How to do this ?
thanks,Hi,
Please go through the links,
Re: Sending an Email
Sending Email. Urgent
Regards,
Azaz. -
How to use a standard text in Smartform ?
hi all...
iam want to use standard text in smartform ?
can any one tell me how to do this ?
Thanks
sandyuse function module READ_TEXT to read standard text .
Regards,
Shiva Kumar -
Pls explain how to add standard text in sapscript & smartforms
Dear friends,
pls explain how to implement standard text into sap script and smartforms.
in how many we can do.
and what is diff between include text & text modules in smartforms.
how we can translate into multiple languages.
Regards
Jagadeeshwar.Bhi,
for the include text goto tcode so10.
for changing the smartform and scripts use there methods..
1. goto se63>translation->abap objects->other long texts->FS Forms and Styles---> for scripts use Forms
for smartforsm use SAPSmart form
for styles use Styles
2. goto se71->utilities->original language.---> source lang
(for scripts) target lang
to include the include text created in the tcode so10 in the smartforms go to general attributes of the text element--text type> include text...
regards,
venkat.
Edited by: venkat appikonda on Mar 22, 2008 11:56 AM -
How to Maintain documentation (se38) using standard text (SO10)
Hi,
I have created standard text using SO10. Now I want to include the standard text in documentation (SE38) section of my ABAP program.
I tried using /: INCLUDE 'YTEST' OBJECT TEXT ID ST LANGUAGE EN
But the standard text is not showing up when I click the documentation icon in the selection screen.
Can you please let me know how to maintain documentation for ABAP programs using Standard Texts.
Thanks in advance.
Sincerely,
VidyaHi Mahesh,
In SO10, which format key has been used (AS, /*, /:, *.... to show up in documentation). when you used insert->text-> did you use 'expand immediately' check box. If expand immediately option is used, it won't serve our purpose.
=
(space)
Example
SO10 Yeurope_terms
Inside Yeurope_terms
Terms: For Europe
/* No Tax for Italy
Waiting for your reply.
Sincerely,
Vidya
Maybe you are looking for
-
Creative Sound Blaster Audigy 4 With Rem
System Specs:Windows XP Pro x64 - VISTA SOON! i hope.MSI mobo with AMD64bit Athlon processorAudio card: PCI Creative Soundblaster Audigy 4 with paperweight IR reci'ver and remoteATI Radion 950 Pro with 256DDR3 PCI Xpress2Gig of System Memory?ok i've
-
How to use the SSO functionality when a button is clicked in Adobe Form?
I have an offline interactive form - when the user clicks on a SUBMIT to SAP button, it asks for user id and password. However he user does not have a password to log into SAP directly - he will be logging in via Single Sign On. Can you please advise
-
TLF in pure AS3 project?? Big swc woes...
I'm trying to find any info on using TLF text in a pure AS project (using FDT), but quickly finding myself getting confused by it all. My normal workflow when laying out text is to - use Flash Pro to lay my text out within a MovieClip, - set that Mov
-
Is this a Bug? Iphone and PODCASTS?
When you look at your phone Podcast then select GET MORE, you go on-line, then if you want to see what's in your library, you have to hit the home button, close the iPod screen, then repopen podcasts. If you go to GET MORE then choose, PODCASTS, it s
-
Mighty Mouse can't Scroll DOWN over Ads
Does anyone else have this issue? Safari Beta (3.0.3), 10.4.10, USB mighty mouse. When I go to some pages, say this one: http://gamers-creed.com/?p=230. And scroll down over the ads, the scrolling stops. Scrolling up is fine. It's annoying because it