How to use startscan signal for triggering for E-series DAQ

Hi, I want to collect the engine cylinder pressure data with a PXI-6070E DAQ card and BEI Encoder. I want to use the TDC signal as trig1, and crank angle signal as startscan for triggering. Could anybody give me an example or suggestions about doing this in labview. I cannot find any example that uses startscan signal for trigging. Thanks.

There is an example VI that is installed with LabVIEW. It is called "Cont Acq&Graph ExtScanClk D-Trig.vi" and it is located in the following LLB.
\Examples\DAQ\anlogin\anlogin.llb
Your project aligns very closely with a past project of mine. If you require professional expert assistance, feel free to call on us.
Daniel L. Press
Certified LabVIEW Developer
PrimeTest Corp.
www.primetest.com

Similar Messages

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

How to use the same email address for outgoing email on two iPads?

How to use the same email address for outgoing email on two iPads?. My wife and I both use the same email address. We receive the same incoming email on both iPads but are unable to send email from my wife's iPad. She is using an iPad 2 and is usng IOS 6.0.1

Hi Creaturekeeper,
If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Take care,
Alex H.

How to use the field of 'FM for Determining Address' in report RSWUWFML2?

Dear gurus,
In the selection screen of report RSWUWFML2, there is a field named 'FM for Determining Address' . How to use it? Is it for sending e-mail to specific e-mail addresses?
Regards
David

I will test soon. Thanks to all involved.

WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?

WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?
I have installed KB2734608, but when I search MS13-101 , no patch for Win 2012.
Can you help me resolve this problem ?
Thanks

On Thu, 10 Apr 2014 06:01:48 +0000, fujitsu08 wrote:
WSUS 3.2 work on Win2008 R2, how to use it deploy MS patch for Win 2012 ?
WSUS has its own, dedicated forum where the WSUS experts answer questions.
You should repost your question here:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus
Paul Adare - FIM CM MVP
Aibohphobia: n. Fear of Palindromes

How to use find my iPhone app for windows pc

How to use find my iPhone app for windows pc ... Is it possible to do..
Or what is the closest app to do that.,,,,,

iPhone User Guide (For iOS 5.0 Software)
iCloud: Find My iPhone
iCloud: Find My iPhone overview
iCloud: Set up Find My iPhone

How to use 'DELETE ADJACENT DUPLICATES FROM' for deleting as some field

How to use 'DELETE ADJACENT DUPLICATES FROM' for deleting as some field
eg:
I have a inner table ,it contains a field named ast_guid,now,I search ten records,contains some duplicate records in the field of ast_guid.but I can not delete the duplicate records as ast_guid.

If the type of inner table is standard table, you should sort the inner table by the fields before user 'DELETE ADJACENT DUPLICATES ', and use COMPARING addtion.
Edited by: Justin on Jun 28, 2009 9:48 AM

SMP3 - AppDevelopment (Agentry):how to use GCM (Google cloud Messaging) for Agentry Application.

Hi, I have a question on SMP3 and AppDevelopment (Agentry): how to use GCM (Google cloud Messaging) for Agentry Application for PUSH notification

Pratik,
Let me walk you through the flow with the assumption that the user is on an Android device and "connected" to the Agentry server.
An emergency workorder is created in SAP and assigned to the technician.
The SAP backend system will notify the Agentry server via an XML message that there is a workorder to send.
Agentry will get the details and if the user is connected attempt to send the workorder to the device via the Push mechanism
If the push fails to reach the Agentry client, the Agentry server will send a GCM message to the user
When the user returns to the Agentry client, the normal push processing / fetch will occur to receive the workorder from the server assuming the push retrys are in effect.
So, essentially you should not have to do anything to get the GCM to work as a secondary notification mechanism.
If you are looking to do something else with GCM that would be outside of Agentry.
--Bill

How i use value signaling Event?

how i use Value signaling event by labview?
can you send me example?

Wiring a value to Value(signaling) is like having a user click a button. Here is an example.
- tbob
Inventor of the WORM Global
Attachments:
Trigger_Other_Event[2].vi ‏156 KB

How to use the same credit card for more than one customer master

Hi,
this is a question for consultants at least a little familiar with SAP business partner, Customer-vendor-intergration cvi, contract accounting:
My customer wants to store the same credit card with more than one customer. Arguments are that family members or partners may mutually agree to use the same credit card for their distinct purchases.
I never tried with amazon or the likes but I know that SAP validates the uniqueness of credit cards.
I found 6 code line where the message (V/)005 "Payment card &1 &2 is already assigned to customer &3" prohibits duplicate assignment.
Even if I create a couple of enhancements to suppress the error, I don't know how the system will work.
The customer does not like the idea of using alternative payer.
Did you ever face the same problem and how did you solve it?
Much Thanks in advance
Best regards
Clemens

thanks

How to use the table maintenance events for validating the input entries..?

Hi,
I have created a Z table with 6 fields in which all are KEY fields. All are of CHAR type. I have created the Table Maintenance Generator for the same. While maintaining the entries in the table, even though I maintain a blank entry for a field it is saving the entry. But, I don't want that way. All the fields are mandatory in my table. One should enter all the fields. Otherwise it should not allow to save the entry. So, I think it can be done using the Table Maintenance Events. can someone tell me how to use the Table Maintenance Events. and which event to use for my reuqirement and what is the logic to be written.
Or Is there any other way to solve my problem.
Please share your inputs. Thanks in advance.
Best regards,
paddu.

In the table maintenance generator, Environment --> Modifications --> Events then a screen will be appear here,we need to create the Events.In the EVENTS screen, press new Entries, there give 01(Before Saving the Data in the Database) and give a name(This will become a PERFORM), then click the Editor pushbutton, this will be there at the right side of the entry, then a popup will be appear, you can create an include program, there inside of the include program write ur code.
Here is documentation for Event 01(Before Saving the Data in the Database )
Event 01: Before Saving the Data in the Database
Use
This event occurs before new, changed or deleted entries are written to the database. Other activities can be performed, for example:
hidden entry processing
fill hidden fields
flag data to be written to hidden tables after the database change.
To have the changes saved by the central maintenance dialog routines, SY-SUBRC must be set to 0 at the end of the routine.
Realization
This event has no standard routine. The following global data is available for the realization of the user routine:
internal table TOTAL
field symbols
field symbols <ACTION> and <ACTION_TEXT>
<STATUS>-UPD_FLAG
If internal table data are to be changed before saving, t he changes should be made in both the internal table TOTAL and in the internal table EXTRACT.
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM.
Regards,
Joy.

How to use ALV in web dynpro for ABAP?

Hi,
I am new to web dynpro. Now I want to create a table using ALV to display. I have no idea how to use it.
I only know I need to add the SALV_WD_TABLE for component usage. Can anyone give me some hints
or step-by-step procedure?
Thanks.
Awards will be provided.
Best Regards,
Chris Gu

Hi,
Please go thru this set of [tutuorials|https://www.sdn.sap.com/irj/sdn/webdynpro?rid=/webcontent/uuid/60ea94e5-0901-0010-c3bb-aad5ea9620d8].
Its really good for ALV.
I also used this as I am also new to WD ABAP.
Revert back with issues.
Regards,
Sumit

How to use the select statement in for loop

Hi All,
my question is can we use select statement in for loop like as follows .
for key in select key from one_table.
when i am using this am getting an error like Found select invalid i identifier
how to make use of select statement in for loop
please suggest me .
Thanks
Sree

SQL>set serveroutput on;
SQL> DECLARE
     BEGIN
     FOR Cur_Rec IN (SELECT dname FROM dept) LOOP
      DBMS_OUTPUT.PUT_LINE(Cur_Rec.dname);
     END LOOP;
     END;
SQL>
ACCOUNTING
RESEARCH
SALES
OPERATIONSAs per your requirement always filter the Query beforehand
Like
FOR Cur_Rec IN (SELECT key FROM <table> WHERE key=1) LOOP
END LOOP;Edited by: Lokanath Giri on १ दिसंबर, २०११ ३:५६ अपराह्न

How to use Cache Management Library (CML) for custom applications?

Hello,
We are planning the migration of multiple applications (J2EE, Portal, Web-Dynpro for Java) from 7.01 to 7.3 and we would like to replace some custom cache implementations with a central cache management provided by the SAP Web-AS Java.
Several SAP standard services (e.g. UME, Configuration Manager, Scheduler) seems to use the "Cache Management Library" (CML):
[http://help.sap.com/saphelp_nw73/helpdata/en/4a/f833eb306628d2e10000000a42189b/frameset.htm]
Such caches can be monitored using SAP Management Console (AS Java Caches).
Portal Runtime (cache_type=CML) and Web Page Composer can also be configured to use CML:
[http://help.sap.com/saphelp_nw73/helpdata/en/49/d822a779cf0e80e10000000a42189b/frameset.htm]
[http://help.sap.com/saphelp_nw70ehp2ru/helpdata/en/13/76db395a3140fcb17b8d24f5966766/frameset.htm]
So our questions:
How to use CML for custom applications?
Is there any example or documentation available?
Kind Regards,
Dirk

Thanks Vidyut! You've answered my question.
I placed the jar file in the $CATALINA_HOME/shared/lib directory. But where should I place the taglib TLD file? And how should I reference it in web.xml?
Currently, my web.xml is as follows and it doesn't work.
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<taglib>
<taglib-uri>http://abc.com</taglib-uri>
<taglib-location>c:\Tomcat\shared\lib\mytags-taglib.tld</taglib-location>
</taglib>
</web-app>
Thanks again!
Joe

How to use startscan signal for triggering for E-series DAQ

Similar Messages

Maybe you are looking for