How to use stored keychain to change Wi-Fi connection
In my office,we have three Wi-Fi connection A,B,C.I had connected them in store the password in keychain.For now,i want to create a applescript to auto connect them by one click.Like i click application A,then it will help me to connect to A Wi-Fi and so on.
But,after i searched many knowledge from web,the code maybe not work on lion.
tell application "Keychain Script"
set serverKey to frist key of current keychain whose name is "EUCMAC"
set acct to account of serverKey
set pswd to password of serverKey
end tell
Could somebody help me on this case?
Thanks.
Rick Jiang
Not what you're asking and obviously a guess as to why you're doing this (and why you need this isn't stated)...
Switch all three WiFi devices over to access point (what Apple calls "bridging") configurations and eliminate this particular complexity from your network?
Not the answer to the direct question, but this'll work for one of the more common reasons folks ask this, and it'll make end-user operations in your network easier. One password across all. And this also allows roaming across access points without having to reset the connections, for instance.
Similar Messages
-
How to use Stored Procedure Call in Sender JDBC adapter
Hi All,
Could someone send me a blog on how to use Stored Procedure call in Sender JDBC adapter?
XierHi Xler
refer these links
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Also, you can check Sriram's blog for executing Stored Procedures,
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
This blog might be helpfull on stored procedures for JDBC
JDBC Stored Procedures
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Please go through these threads and see if it helps...
Re: How to execute Stored Procedure?
Re: Problem with JDBC stored procedure
Thnaks !! -
How to use Stored Procedures in form 6i Blocks
Dear Friends,
I would like to know how to use Stored Procedures while creating blocks in Data Block Wizard in forms 6i application.
Please send me sample code of stored procedure.
Regards,
Khader.The Data Block Wizard is not for creating stored procedures. It will allow you to use a stored procedure in your form. See the help documentation for how to use the wizard.
Here's an example of a simple procedure. If you search the database forum or the web, you will find many examples.
CREATE OR REPLACE PROCEDURE procedure_name (value OUT NUMBER ) AS
BEGIN
SELECT COUNT(*) INTO value
FROM your_table;
END;
Message was edited by:
Mark Roberts -
HOW TO USE STORED PROCEDURES IN JASPERREPORTS(URJENT)
Hi,
i'm using jasperreports in struts based project. How to use stored procedures in jasperreports. pls send the solution urjent
Thanks in advance
rameshHi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag -
How to use stored procedures in DIAdem and Can the stored procedures be used to return values?
Can anyone please tell me how to use stored procedures in diadem and to return values from it. Its really important, can you please answer it at the earliest.
Thanks In advance
spiyaHi Spria,
I'm very sorry for the mix-up, I thought Allen was going to answer you back with the particulars that we found out. Check out the attached Word document and the below tidbits:
The built-in DIAdem ODBC functions {SQL_...()} can only call stored functions, which return a scaler result {found then in SQL_Result(1,1)}. The syntax for this with an ORACLE db is
"select function(parameters) from package"
...where package defaults to "dual" if you don't use your own package.
There might be exceptions to that though, and the syntax will be different for other databases. Note that stored ORACLE procedures can NOT be called from the ODBC functions, instead you must use either ADO function calls in the DIA
dem VBScript or the OO4O COM wrapper that ORACLE provides (this is described in further detail in the below Word document).
Hope this helps,
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
Calling_ORACLE_Stored_Procedures_from_DIAdem.doc 28 KB -
How to use Stored Procedures in JDBC sender side and receiver side
Hello,
Can anyone explain how to use stored procedures in configuring the scenario using JDBC adapter at bothe sides sender nad receiver..
Thanks,
SooryaHi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag -
How to use Stored Procedure in RPD
In the physical layer we have a option for procedure when we select a tables general tab.I created the procedure
but i am not able to retrieve values in the Dashboard.
Could anyone help me with this as how to use procedure.Oracle stored procedure don't return recordssets. You have to put the result of the stored procedure in a global temp table and reference the rpd to that table. the execution of the stored procedure can be triggerd form the "execute before query" part in the connection pool.
regards
John
http://obiee101.blogspot.com/ -
How to use BAPI_MATERIAL_BOM_GROUP_CREATE for BOM change?
Hi All-
I would like to know how to use the BAPI - BAPI_MATERIAL_BOM_GROUP_CREATE to change an existing BOM? I know other available function modules for changing BOMs, but I would appreciate if someone tell me how to use the above BAPI. I heard we can use this to change the BOM.
Points will surely be awarded....
THanks
M A
Edited by: Shakir on Jul 15, 2008 4:29 PMhi,
data : TESTRUN LIKE BAPIFLAG,
CALL FUNCTION 'BAPI_MATERIAL_BOM_GROUP_CREATE'
EXPORTING
TESTRUN = TESTRUN
TABLES
ITEMASSIGNMENTS = ITEMASSIGNMENTS
SUBITEMASSIGNMENTS = SUBITEMASSIGNMENTS
TEXTS = TEXTS
RETURN = RETURN
MATERIALRELATIONS = MATERIALRELATIONS
SUBITEMS = SUBITEMS
ITEMS = ITEMS
VARIANTS = VARIANTS
BOMGROUP = BOMGROUP
EXCEPTIONS
OTHERS = 01. -
How to use stored procedure in crystal report for eclipse
Hi;
I am working on crystal report for eclipse 2.0 and trying to use stored procedure in report .It is created from Oracle but it is not showing any dependencies
CREATE OR REPLACE procedure ACT_DB.getCostTransferDetails
p_In_Contract_ID varchar2 DEFAULT '*',
p_In_Status_ID varchar2 DEFAULT '*',
p_In_COST_TRAN_DATE varchar2 DEFAULT '*',
p_In_DEPT_ID varchar2 DEFAULT '*',
p_In_PROJECT_ID varchar2 DEFAULT '*',
p_In_EMPLOYEE_ID varchar2 DEFAULT '*',
p_Out_CostTransfer_Cusor OUT COST_TRANSFER_PACKAGE.COST_TRANSFER_TYPE
AS
BEGIN
OPEN p_Out_CostTransfer_Cusor FOR
SELECT
header.cost_tran_id,
header.cost_tran_date,
header.total_credit_amount,
header.total_debit_amount,
header.transfer_status,
header.updated_by,
header.added_by,
header.trf_over_ninety_days,
header.business_unit_id,
header.equip_approval,
header.batch_desc,
details.opr_unit_id,
status.status_id,
details.fund_code_id,
details.prgm_code_id,
details.class_id,
details.activity_id,
details.product_id,
details.status_id,
details.transaction_amount,
details.jrnl_date,
details.adjust_prcnt,
details.adjust_amnt,
details.details_equip_approval,
details.detail_desc,
details.account_id,
details.project_id,
details.dept_id,
details.contract_id,
details.reason_code_id,
details.jrnl_id,
employee.f_name,
employee.l_name,
employee.employee_id,
project.project_id,
project.project_status,
--header.transfer_status,
contracts.contract_desc
FROM header, details, status, employee, department, project, contracts
WHERE (header.cost_tran_id = details.cost_tran_id)
AND (header.cost_tran_date = details.cost_tran_date)
AND (header.transfer_status = status.status_id)
AND (department.dept_id = details.dept_id)
AND (department.dept_id = employee.dept_id)
AND (project.project_id = details.project_id)
AND (contracts.contract_id = details.contract_id)
AND (details.Contract_ID = p_In_Contract_ID OR p_In_Contract_ID ='*' )
AND (header.TRANSFER_STATUS = p_In_Status_ID OR p_In_Status_ID ='*' )
AND (TO_CHAR(details.COST_TRAN_DATE, 'MM/DD/YYYY') = p_In_COST_TRAN_DATE OR p_In_COST_TRAN_DATE ='*' )
AND (details.DEPT_ID = p_In_DEPT_ID OR p_In_DEPT_ID ='*' )
AND (details.PROJECT_ID = p_In_PROJECT_ID OR p_In_PROJECT_ID ='*' )
AND (header.ADDED_BY = p_In_EMPLOYEE_ID OR '*'=p_In_EMPLOYEE_ID )
Can any another way to make procedure
Thanx
Regards ,
AmolHi Amol,
Are you able to execute your stored procedure from oracle?.
- If "Yes" then use the Crystal Report XIR2 Designer to create the report.
- Import this report in the Crystal Report For Eclipse Workbench.
- The latest version for Crystal Report For Eclipse is SP1.
Please let me know the results.
Thanks,
Neeraj -
How to use stored script from with Grid Control 10gR2
HI
My backup method uses a stored script in the recovery catalog that is separated from Grid Control's repository database.
In Scheduled Backup, there is no way to connect to recovery catalog; let alone use stored script. Is that true?
Thanks,
Kevinit works, here is a test case , I use this functionality a lot
$connected from HOST
rman target / catalog <mycatalog>
connected to target database: TOPAZ (DBID=3348250252)
connected to recovery catalog database
RMAN> create script testbackup
2> {backup current controlfile;
3> }
created script testbackup
RMAN> run {execute script testbackup;}
executing script: testbackup
Starting backup at 12-JUN-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=217 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=251 devtype=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid=200 devtype=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: sid=337 devtype=DISK
allocated channel: ORA_DISK_5
channel ORA_DISK_5: sid=182 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current controlfile in backupset
channel ORA_DISK_1: starting piece 1 at 12-JUN-07
channel ORA_DISK_1: finished piece 1 at 12-JUN-07
piece handle=/rman_backup/d_TOPAZ_s_12344_p_1_t_625077001 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
Finished backup at 12-JUN-07
Starting Control File and SPFILE Autobackup at 12-JUN-07
piece handle=/rman_backup/c-3348250252-20070612-06 comment=NONE
Finished Control File and SPFILE Autobackup at 12-JUN-07
NOW in grid control I have configured my Recovery catalog settings, check for OS username , that should be owner of oracle home for recover catalog
I schedule a RMAN backup job with these parameters in script
{execute script testbackup;}
Status Running
Step ID 203585
Targets topaz.ucas.ac.uk
Started 12-Jun-2007 16:34:56 (UTC+01:00)
Step Elapsed Time 1 minutes, 37 seconds
Management Service stardb1:4889_Management_Service
TIP Management Service from which the job step was dispatched.
Output Log
Recovery Manager: Release 9.2.0.6.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
connected to target database: TOPAZ (DBID=3348250252)
RMAN>
connected to recovery catalog database
RMAN>
echo set on
RMAN> {execute script testbackup;}
2> exit;
executing script: testbackup
Starting backup at 12-JUN-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=164 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=134 devtype=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid=22 devtype=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: sid=198 devtype=DISK
allocated channel: ORA_DISK_5
channel ORA_DISK_5: sid=145 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current controlfile in backupset
channel ORA_DISK_1: starting piece 1 at 12-JUN-07
channel ORA_DISK_1: finished piece 1 at 12-JUN-07
piece handle=/rman_backup/d_TOPAZ_s_12346_p_1_t_625077300 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
Finished backup at 12-JUN-07
Starting Control File and SPFILE Autobackup at 12-JUN-07
piece handle=/rman_backup/c-3348250252-20070612-07 comment=NONE
Finished Control File and SPFILE Autobackup at 12-JUN-07
null -
How to use Stored Procedures in Sender JDBC Adapter.
Hi Experts,
we are having a lot of legacy application which are on .Net. basicaly using MS SQL & stuff. As a Integration scenario we have to triggered some events from JDBC to XI. How can i do this. Secondly there are multiple tables from which i will be selecting a record & sending it to XI for further processing the Receiver Side we are having SAP system.
How can i use a Stored procedure in XI Sender Adapter ?
Can anybody tell me step by step how to get the XSD of Stored procudere & used in XI. ?
I am new to XI. I have not yet configured any sceneario.
Can anybody guide me step by step how to do this.
I am only intersted in Sender Side configuration.
Regards,
UmeshHey,
check this in the JDBC Sender Adapter Configuration
Query SQL Statement -> Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs.
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
JDBC adapter
/people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
<b>Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*</b> -
How to use stored procedure with many return results and variable with perl
Hi everybody,
i´m writtting now a Perl programm, wich use a oracle stored procedure with more than 1 result and 1 variable(I have to return 2 variable fpr each result). I don´t now how I can get it.I already search the web but I didn´t find.
My example:
PROCEDURE get_projects_and_sub_projects (
v_project_id IN INTEGER,
v_project_c_id OUT INTEGER,
v_project_id_find OUT VARCHAR2
IS
BEGIN
SELECT c_id, proj_id
INTO
v_project_c_id,
v_project_id_find
FROM t_projet
WHERE t_projet .ksa_pro_art_kbz = 'KU'
AND t_projet.proj_id LIKE v_project_id || '%';
EXCEPTION
WHEN NO_DATA_FOUND
THEN
v_project_c_id := NULL;
v_project_id_find := NULL;
WHEN OTHERS
THEN
kmessages.error (NULL,
'get_projects_and_sub_projects',
'Project-Name: ' || v_project_id,
'Errornumber: '
|| SQLCODE
|| ' Error: '
|| SQLERRM,
TRUE,
TRUE
raise_application_error (-20001,
'Error '
|| SQLCODE
|| ' get_projects_and_sub_projects: '
|| SQLERRM,
TRUE
END get_projects_and_sub_projects;
in Perl Program:
sub get_projects_unterprojects_name($$){
my ($db_handle, $proj_name_id) = @_; #$db_handle ist the DB Connection return value
my $db_proj_c_id;
my $db_proj_name;
eval{ my $csr = $db_handle->prepare(q{
BEGIN
pro_doc_ber.get_projects_and_sub_projects(:proj_name_id, :db_proj_c_id, :db_proj_name);
END;
# parameter value
$csr->bind_param(":proj_name_id", $proj_name_id);
# return values
$csr->bind_param_inout(":db_proj_c_id", \$db_proj_c_id, 11);
$csr->bind_param_inout(":db_proj_name", \$db_proj_name, 20);
$csr->execute(); };
But this didn´t work. Could somebody give me some idea?
Thank you
FelxSome additional info would probably be helpful.
What is your programming enviironment? Java?
In any case I suspect that you will need to use the OCI to deal with specific Oracle types such as user defined object types -- thats not standard ANSI SQL.
In Java I believe you need to use OPAQUE, there are some examples out there. I'm mostly a PL/SQL developer with some Java expereince so others here are more qualifed to answer your question more directly. -
How to use stored procedure which returns result set in OBIEE
Hi,
I hav one stored procedure (one parameter) which returns a result set. Can we use this stored procedure in OBIEE? If so, how we hav to use.
I know we hav the Evaluate function but not sure whether I can use for my SP which returns result set. Is there any other way where I can use my SP?
Pls help me in solving this.
ThanksHi Radha,
If you want to cache the results in the Oracle BI Server, you should check that option. When you run a query the Oracle BI Server will get its results from the cache, based on the persistence time you define. If the cache is expired, the Oracle BI Server will go to the database to get the results.
If you want to use caching, you should enable caching in the nqsconfig.ini file.
Cheers,
Daan Bakboord -
How to use stored procedures in postgresql
hiii,
if any body knows how to create a stored procedure in postgresql
please help meHi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag -
How to use BAPI Program for change workcenter in co02?
Hi Abapers.
Anybody please tell me how to change the workcenter in CO02 using BAPI Programe.
Please give me sample of this.
I will give urs reward of points.
Thanks
Regards,
S.Muthu.Hi,
Use the Function module CR_WORKCENTER_UPDATE
for workcenter change.
It is an update function module so you have to call it in update mode with a COMMIT statement to trigger it.
CALL FUNCTION CR_WORKCENTER_UPDATE IN UPDATE TASK
exporting...
imporing..
COMMIT WORK.
Note: only after the commit statement the function module will be called in update mode.
Regards,
Raj.
Maybe you are looking for
-
I no longer have Safari or iTunes available on my iPad. The icons disappeared. How can I re-image my iPad to get the original software back? There is nothing on the iPad that I need to keep or back up. Thanks,
-
Dynamically update current year in AssemblyCopyright
I need to dynamically update current year in AssemblyCopyright section under Assembly.info.vb Thanks Bindu
-
Query giving no result as well as no error
hi...good evening all... i have a database server in a machine. the clients which are connected to those reported me that they cannot execute any queries from the schema connected to that database. i have tried and got the same result. There was no e
-
Aperture and iPhoto will not open
I installed the latest upgrade to the OS and now neither Aperture nor iPhoto will open. What's up?
-
Opportunity to trash my coding skills!!
Hi, I'm trying to implement the Command Pattern for the action below, and was just wondering if anyone would like to give their opinion. I've made it a Singleton....does this seem like a good idea? Is it fairly standard practice to combine a Command