How to use string control as terminal window
Hello All
I am trying to create a terminal window in my VI and to do this i have a string control and a string indicator.
I want the user to be able to write a command in the terminal and when hitting enter the control should update, but not before! I would
like the user to be able to enter multiple commands without having to re-click the control with the mouse, so it has to stay in the
control window.
The output from this string control is input to a invoke node to an external motor controller, which replies with a string input to the string indicator.
Tried to do some event case, but not quite sure how I am going to detect only the enter command.
Any ideas how to preceed?
Thanks
Regards
Tommy
Solved!
Go to Solution.
Yeah, in your event structure, look for an event of your string control called "key down"...on the left, there are several parameters coming up (char, vkey etc.) where you can use for example the char to look for char=13 (return).
look here: http://zone.ni.com/reference/en-XX/help/371361B-01/lvprop/control_key_down/
good luck
christian
THINK G!! ;-)
Using LabView 2010 and 2011 on Mac and Win
Programming in Microsoft Visual C++ (Win), XCode (Mac)
Similar Messages
-
How to use table control in bdc, plz somebody tell me.
Hi Gurus,
Ples tell me
how to use table control in bdc, plz somebody tell me.
And send Sample CODE also. Thnaks in advance.hi,
Table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen?
Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
we can determine the number of visible lines on Transaction Screen from our Calling BDC program.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference
in Static ASSIGN and Dynamic ASSIGN.
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop.
Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6
using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: , , .
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to ,
name2 to ,
name3 to .
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using DataTable-matnr.
perform bdcfield using DataTable-menge.
perform bdcfield using DataTable-indicator.
endloop.
enddo.
example 1
BDC table control is an area on the screen in which you can display data in tabular form. You process it using a loop. Table controls are comparable to step loop tables. While a table control consists of a single definition row, step loop blocks may extend over more than one row. Table controls are more flexible than step loops, and are intended to replace them
When you need to handle a scenario like in sales order,it may contain more than one material,if you have more than one material We have to use table control,it will have number of columns and number of rows.
Table controls allow you to enter, display, and modify tabular data easily on the screen
Check this code,
PARAMETERS: file1 LIKE rlgrap-filename.
*Internal Table Declarations
DATA: BEGIN OF itab OCCURS 0,
matnr(18) TYPE c, "MaterialNumber
werks(4) TYPE c, "Plant
vdatu(10) TYPE c, "Valid From Date
bdatu(10) TYPE c, "Valid To Date
lifnr(10) TYPE c, "Vendor Number
ekorg(4) TYPE c, "Purchasing Organization
feskz TYPE c, "Fixed
autet TYPE c, "MRP Indicator
END OF itab.
DATA: bdcdata LIKE TABLE OF bdcdata WITH HEADER LINE.
*VARIABLES Declarations
DATA: wa1 LIKE LINE OF itab. "Workarea for ITAB
DATA: n TYPE i, "Check
count TYPE i.
DATA: cnt(2), "Counter
wa(15). "Workarea to hold concatenatedvalue
DATA v_msg(100).
DATA: flag.
DATA: file TYPE string.
*Initialization event
INITIALIZATION.
*At-selection-screen event
*To provide Input help for file name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR file1.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = file1.
*START-OF-SELECTION EVENT
START-OF-SELECTION.
MOVE file1 TO file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*To populate BDCDATA and start data transfer
LOOP AT itab .
To validate Plant range
IF itab-werks = '1000' OR itab-werks = '2000'
OR itab-werks = '1008'.
AT NEW werks.
CLEAR: n.
cnt = 1.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EORD-MATNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EORD-MATNR'
itab-matnr.
PERFORM bdc_field USING 'EORD-WERKS'
itab-werks.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0205'.
CONCATENATE 'EORD-EKORG(' cnt ')' INTO wa.
PERFORM bdc_field USING 'BDC_CURSOR'
wa.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
ENDAT.
IF n = 12.
READ TABLE bdcdata WITH KEY fval = '=BU'.
bdcdata-fval = '=NS'.
MODIFY bdcdata INDEX sy-tabix TRANSPORTING fval.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0205'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EORD-VDATU(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
cnt = 2.
n = 2.
ENDIF.
CONCATENATE 'EORD-VDATU(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-vdatu.
CONCATENATE 'EORD-BDATU(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-bdatu.
CONCATENATE 'EORD-LIFNR(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-lifnr.
CONCATENATE 'EORD-EKORG(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-ekorg.
CONCATENATE 'RM06W-FESKZ(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-feskz.
CONCATENATE 'EORD-AUTET(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-autet.
IF n <> 12.
n = cnt.
ENDIF.
cnt = cnt + 1.
AT END OF werks.
CALL TRANSACTION 'ME01' USING bdcdata
UPDATE 'S'
MODE 'A'.
CLEAR:bdcdata,bdcdata[].
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = sy-msgid
lang = 'EN'
no = sy-msgno
v1 = sy-msgv1
v2 = sy-msgv2
v3 = sy-msgv3
v4 = sy-msgv4
IMPORTING
msg = v_msg.
WRITE:/ v_msg.
CLEAR: bdcdata,bdcdata[],flag.
ENDAT.
ENDIF.
ENDLOOP.
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.
Insert field values
FORM bdc_field USING fnam fval.
IF NOT fval IS INITIAL.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
CLEAR wa.
ENDFORM.
Sample code 2
THis is example to upload the Bank details of the Vendor which has the TC.
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards -
How to use table control in bdc briefly?
how to use table control in bdc briefly in description manner ?
Hi friend,
here i am giving exm. code of table control.see if help full to u.
REPORT zxk_01
NO STANDARD PAGE HEADING LINE-SIZE 255.
include bdcrecx1.
TYPES : BEGIN OF ty_data,
line(100) TYPE c,
END OF ty_data.
PARAMETERS: p_pcfile LIKE ibipparms-path DEFAULT 'D:\NKS.TXT'.
DATA : g_filename TYPE string.
TYPES : BEGIN OF ty_file,
lifnr(16) TYPE c, " vendor
bukrs(4) TYPE c, "company code
ktokk(4) TYPE c, " Acc grp
anred(15) TYPE c, " Title
name1(35) TYPE c, " name
sortl(10) TYPE c, " search term
stras(35) TYPE c, " street
ort01(35) TYPE c, " city
ort02(35) TYPE c, " district
land1(3) TYPE c, " country
pfach(10) TYPE c, " PO BOx
spras(2) TYPE c, " language
kunnr(10) TYPE c, " Customer
vbund(6) TYPE c, " trading partner
banks(3) TYPE c, " BANK COUNTRY
bankl(15) TYPE c, " BANK KEY
bankn(18) TYPE c, " BANK ACC
koinh(60) TYPE c, " ACC HOLDER
bkont(2) TYPE c, " CK
bvtyp(4) TYPE c, " BNKT
bkref(20) TYPE c, " REFERENCE DETAILS
namev(35) TYPE c, " first NAME
name2(35) TYPE c, " NAME
telf1(16) TYPE c, " TELEPHONE
abtnr(4) TYPE c, " DEPTT
pafkt(2) TYPE c, " FUNCTION
akont(10) TYPE c, " REC ACCOUNT
zuawa(3) TYPE c, " SORT KEY
lnrze(10) TYPE c, "HEAD OFFICE
fdgrv(10) TYPE c, " CASH MGMT GRP,
frgrp(4) TYPE c, " RELEASE GRP
zterm(4) TYPE c, " PAY TERMS
togru(4) TYPE c, " TOLERENCE GRP,
reprf, "CHECK DOUBLE INV
zwels(10) TYPE c, " PAYMENTS METHODS
zahls, " PAYMENTS BLOCK
hbkid(5) TYPE c, " house bank
zgrup(2) TYPE c, " grouping key
mahna(4) TYPE c, " dunn procedure
mansp, " DUNNING BLOCK'
gmvdt(10) TYPE c, " LEGAL DONE PROCEDURE
lfrma(10) TYPE c, " DUNN RECEPIENT
madat(10) TYPE c, " LAST DUNNED
mahns(1) TYPE c, " dunning level
mgrup(2) TYPE c, " grouping key
busab(2) TYPE c, "dunning clerk
END OF ty_file.
DATA : BEGIN OF it_xk01 OCCURS 0,
lifnr(16) TYPE c, " vendor
bukrs(4) TYPE c, "company code
ktokk(4) TYPE c, " Acc grp
anred(15) TYPE c, " Title
name1(35) TYPE c, " name
sortl(10) TYPE c, " search term
stras(35) TYPE c, " street
ort01(35) TYPE c, " city
ort02(35) TYPE c, " district
land1(3) TYPE c, " country
pfach(10) TYPE c, " PO BOx
spras(2) TYPE c, " language
kunnr(10) TYPE c, " Customer
vbund(6) TYPE c, " trading partner
akont(10) TYPE c, " REC ACCOUNT
zuawa(3) TYPE c, " SORT KEY
lnrze(10) TYPE c, "HEAD OFFICE
fdgrv(10) TYPE c, " CASH MGMT GRP,
frgrp(4) TYPE c, " RELEASE GRP
zterm(4) TYPE c, " PAY TERMS
togru(4) TYPE c, " TOLERENCE GRP,
reprf, "CHECK DOUBLE INV
zwels(10) TYPE c, " PAYMENTS METHODS
zahls, " PAYMENTS BLOCK
hbkid(5) TYPE c, " house bank
zgrup(2) TYPE c, " grouping key
mahna(4) TYPE c, " dunn procedure
mansp, " DUNNING BLOCK'
gmvdt(10) TYPE c, " LEGAL DONE PROCEDURE
lfrma(10) TYPE c, " DUNN RECEPIENT
madat(10) TYPE c, " LAST DUNNED
mahns(1) TYPE c, " dunning level
mgrup(2) TYPE c, " grouping key
busab(2) TYPE c, "dunning clerk
END OF it_xk01.
internal table for bank detaiils
DATA : BEGIN OF it_bank OCCURS 0,
banks(3) TYPE c, " BANK COUNTRY
bankl(15) TYPE c, " BANK KEY
bankn(18) TYPE c, " BANK ACC
koinh(60) TYPE c, " ACC HOLDER
bkont(2) TYPE c, " CK
bvtyp(4) TYPE c, " BNKT
bkref(20) TYPE c, " REFERENCE DETAILS
lifnr(16) TYPE c, " vendor
xezer, " CHECK
END OF it_bank.
INTERNAL TABLE FOR CONTACT PERSON
TYPES : BEGIN OF ty_cust,
lifnr(16) TYPE c,
namev(35) TYPE c, " first NAME
name1(35) TYPE c, " NAME
telf1(16) TYPE c, " TELEPHONE
abtnr(4) TYPE c, " DEPTT
pafkt(2) TYPE c, " FUNCTION
END OF ty_cust.
INTERNAL TABLES DECLARATION
DATA : it_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE,
it_bdcmsgcoll LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE,
it_file TYPE TABLE OF ty_file,
it_data TYPE TABLE OF ty_data,
it_cust TYPE TABLE OF ty_cust.
WORK AREAS FOR TYPES
DATA : wa_xk01 LIKE it_xk01,
wa_data TYPE ty_data,
wa_file TYPE ty_file,
wa_bank LIKE it_bank,
wa_cust TYPE ty_cust.
*CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = lt_file
filetype = 'ASC'
CHANGING
data_tab = iT_DATA.
IF sy-subrc <> 0.
ENDIF.
g_filename = p_pcfile.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = g_filename "'D:\TESTDATA1_XK01.txt'
filetype = 'TXT'
has_field_separator = 'X'
HEADER_LENGTH = 0
read_by_line = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
replacement = ' '
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = it_file
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT it_file INTO wa_file .
ON CHANGE OF WA_FILE-LIFNR.
wa_xk01-lifnr = wa_file-lifnr.
wa_xk01-bukrs = wa_file-bukrs.
wa_xk01-ktokk = wa_file-ktokk.
wa_xk01-anred = wa_file-anred.
wa_xk01-name1 = wa_file-name1.
wa_xk01-sortl = wa_file-sortl.
wa_xk01-stras = wa_file-stras.
wa_xk01-ort01 = wa_file-ort01.
wa_xk01-ort02 = wa_file-ort02.
wa_xk01-land1 = wa_file-land1.
wa_xk01-pfach = wa_file-pfach.
wa_xk01-spras = wa_file-spras.
wa_xk01-kunnr = wa_file-kunnr.
wa_xk01-vbund = wa_file-vbund.
wa_xk01-akont = wa_file-akont.
wa_xk01-zuawa = wa_file-zuawa.
wa_xk01-lnrze = wa_file-lnrze.
wa_xk01-fdgrv = wa_file-fdgrv.
wa_xk01-frgrp = wa_file-frgrp.
wa_xk01-zterm = wa_file-zterm.
wa_xk01-togru = wa_file-togru.
wa_xk01-reprf = wa_file-reprf.
wa_xk01-zwels = wa_file-zwels.
wa_xk01-zahls = wa_file-zahls.
wa_xk01-hbkid = wa_file-hbkid.
wa_xk01-zgrup = wa_file-zgrup.
wa_xk01-mahna = wa_file-mahna.
wa_xk01-mansp = wa_file-mansp.
wa_xk01-gmvdt = wa_file-gmvdt.
wa_xk01-lfrma = wa_file-lfrma.
wa_xk01-madat = wa_file-madat.
wa_xk01-mahns = wa_file-mahns.
wa_xk01-mgrup = wa_file-mgrup.
wa_xk01-busab = wa_file-busab.
APPEND wa_xk01 TO it_xk01.
CLEAR : WA_XK01.
CONTINUE.
ENDON.
IF WA_FILE-BANKS NE ''.
wa_bank-lifnr = wa_file-lifnr.
wa_bank-banks = wa_file-banks.
wa_bank-bankl = wa_file-bankl.
wa_bank-bankn = wa_file-bankn.
wa_bank-koinh = wa_file-koinh.
wa_bank-bkont = wa_file-bkont.
wa_bank-bvtyp = wa_file-bvtyp.
wa_bank-bkref = wa_file-bkref.
wa_cust-lifnr = wa_file-lifnr.
wa_cust-namev = wa_file-namev.
wa_cust-name1 = wa_file-name2.
wa_cust-telf1 = wa_file-telf1.
wa_cust-abtnr = wa_file-abtnr.
wa_cust-pafkt = wa_file-pafkt.
APPEND wa_bank TO it_bank.
APPEND wa_cust TO it_cust.
APPEND wa_xk01 TO it_xk01.
CLEAR : wa_bank , wa_cust.
ENDIF.
ENDLOOP.
START-OF-SELECTION.
LOOP AT it_xk01 INTO wa_xk01.
REFRESH it_bdcdata.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
wa_xk01-lifnr. " vendor
PERFORM bdc_field USING 'RF02K-BUKRS'
wa_xk01-bukrs. " company cpode
PERFORM bdc_field USING 'RF02K-KTOKK'
wa_xk01-ktokk. " Acc group
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
wa_xk01-anred. " title
PERFORM bdc_field USING 'LFA1-NAME1'
wa_xk01-name1. " name
PERFORM bdc_field USING 'LFA1-SORTL'
wa_xk01-sortl. " ' search term'
PERFORM bdc_field USING 'LFA1-STRAS'
wa_xk01-stras. "street'
PERFORM bdc_field USING 'LFA1-PFACH'
wa_xk01-pfach. " po box
PERFORM bdc_field USING 'LFA1-ORT01'
wa_xk01-ort01. " city
PERFORM bdc_field USING 'LFA1-ORT02'
wa_xk01-ort02. " district
PERFORM bdc_field USING 'LFA1-LAND1'
wa_xk01-land1. " country
PERFORM bdc_field USING 'LFA1-SPRAS'
wa_xk01-spras. " language
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-VBUND'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-KUNNR' " customer
wa_xk01-kunnr.
PERFORM bdc_field USING 'LFA1-VBUND'
wa_xk01-vbund. " trading partner
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BKREF(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
DATA : fnam(20) TYPE c,
int TYPE c.
MOVE 1 TO int.
CLEAR wa_bank.
LOOP AT it_bank INTO wa_bank WHERE lifnr = wa_xk01-lifnr.
CONCATENATE 'LFBK-BANKS(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-banks. " city
CONCATENATE 'LFBK-BANKL(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bankl.
CONCATENATE 'LFBK-BANKN(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bankn.
CONCATENATE 'LFBK-KOINH(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-koinh.
CONCATENATE 'LFBK-BKONT(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bkont.
CONCATENATE 'LFBK-BVTYP(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bvtyp.
CONCATENATE 'LFBK-BKREF(' int ')' INTO fnam.
PERFORM bdc_field USING fnam
wa_bank-bkref.
int = int + 1.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0380'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KNVK-PAFKT(05)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
DATA : fnam1(20) TYPE c,
cnt.
cnt = 1.
CLEAR : wa_cust.
LOOP AT it_cust INTO wa_cust WHERE lifnr = wa_xk01-lifnr.
CONCATENATE 'KNVK-NAMEV(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-namev.
CONCATENATE 'KNVK-NAME1(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-name1.
CONCATENATE 'KNVK-TELF1(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-telf1.
CONCATENATE 'KNVK-ABTNR(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-abtnr.
CONCATENATE 'KNVK-PAFKT(' cnt ')' INTO fnam1.
PERFORM bdc_field USING fnam1
wa_cust-pafkt.
cnt = cnt + 1.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0380'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KNVK-NAMEV(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FRGRP'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
wa_xk01-akont. " REC aCC
PERFORM bdc_field USING 'LFB1-ZUAWA'
wa_xk01-zuawa. " SORT KEY
PERFORM bdc_field USING 'LFB1-LNRZE'
wa_xk01-lnrze. " HEAD OFFICE
PERFORM bdc_field USING 'LFB1-FDGRV'
wa_xk01-fdgrv. " CASH MGMT GRP
PERFORM bdc_field USING 'LFB1-FRGRP'
wa_xk01-frgrp. " RELEASE GRP
PERFORM bdc_field USING 'LFB1-CERDT'
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZGRUP'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-ZTERM'
wa_xk01-zterm. " PAYMENT TERMS'
PERFORM bdc_field USING 'LFB1-TOGRU'
wa_xk01-togru. " TOLERENCE GRP
PERFORM bdc_field USING 'LFB1-REPRF'
wa_xk01-reprf. " CHECK DOUBLE INV
PERFORM bdc_field USING 'LFB1-ZWELS'
wa_xk01-zwels. " PAYMENT METHOD
PERFORM bdc_field USING 'LFB1-ZAHLS'
wa_xk01-zahls. " PAYMENT BLOCK
PERFORM bdc_field USING 'LFB1-HBKID'
wa_xk01-hbkid. " HOUSE BANK
PERFORM bdc_field USING 'LFB1-ZGRUP'
wa_xk01-zgrup. " GROUPING KEY
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-BUSAB'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB5-MAHNA'
wa_xk01-mahna. " DUNN PROCEDURE
PERFORM bdc_field USING 'LFB5-MANSP'
wa_xk01-mansp. " DUNNING BLOCK
PERFORM bdc_field USING 'LFB5-LFRMA'
wa_xk01-lfrma. " Dunn representative
PERFORM bdc_field USING 'LFB5-GMVDT'
wa_xk01-gmvdt. " legal dunn proc
PERFORM bdc_field USING 'LFB5-MADAT'
wa_xk01-madat. " last dunned
PERFORM bdc_field USING 'LFB5-MAHNS'
wa_xk01-mahns. " dunn level
PERFORM bdc_field USING 'LFB5-BUSAB'
wa_xk01-busab. " dunning clerk
PERFORM bdc_field USING 'LFB1-MGRUP'
wa_xk01-mgrup. " grouping key
CALL TRANSACTION 'XK01' USING it_bdcdata
MODE 'A'.
ENDLOOP.
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR it_bdcdata.
it_bdcdata-program = program.
it_bdcdata-dynpro = dynpro.
it_bdcdata-dynbegin = 'X'.
APPEND it_bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field
FORM bdc_field USING fnam fval TYPE any.
CLEAR it_bdcdata.
it_bdcdata-fnam = fnam.
it_bdcdata-fval = fval.
APPEND it_bdcdata.
ENDFORM. "bdc_field
*perform close_group. -
How to use the Control lines of a parallel port as Input lines to be read using Labview ?
The details are :
NI Software : LabVIEW
Version : 5.0
OS : Windows 95
NI Hardware : N/A
Drivers : N/A
CPU : Pentium
RAM : 48
Vendor : darcom
Customer Information :
SPEL TESTING
SPEL, INDIA
[email protected]
Ph: (91) 4114 53818
We do not have any DAQ cards within the PC. We have the parallel port which is EPP and ECP compatible having the address 278h on LPT2 and we are trying use this port for reading 8bit data from an external circuit. We developed a vi program in Labview 5.0 to control the parallel port.We tried with the Data lines to send signals from PC to external device through this parallel port with the addr
ess 278h (which
is Data lines) and it works fine. We also tried using reading 4bit data from external
device to PC through this port with the address 279h (which is Status lines) and it
is also working fine.
But it was not possible for us to read through Control lines whose address is 27Ah. Whereas when line printer (dot matrix printer) was
connected, it was possible for us to take print out. Thus printer was working. This
informed us that the control lines are all OK!
Can you please clarify, how to use both control lines and status lines to read 8 bit data through this parallel port using the Labview software.There are several Knowledge Base entries about this on the NI site, but probably the most detailed document is on the Advanced Measurements (www.advmeas.com) website. Try looking at this page, I think you will find it useful.
http://www.advmeas.com/goodies/parallelport.html -
How to use print control in Sap script
I would like to use print control in Sap script.Actualy my problem I have security font Troy ECF. Using this font I would like to print amount field in Check printing.
we count download this font with sap .we talked to customer care they told we should hard code in sapscript. pls can any1 help on this how to do and how to use print control for this fonts.call this funcation. crate_text.
CALL FUNCTION 'CREATE_TEXT'
EXPORTING
FID =
FLANGUAGE =
FNAME =
FOBJECT =
SAVE_DIRECT = 'X'
FFORMAT = '*'
TABLES
FLINES =
EXCEPTIONS
NO_INIT = 1
NO_SAVE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
how to use dual monitor display in windows 7 using MSTSC command ....?????
Hi Anurag,
The main issue is how to use the dual monitor in the Remote Desktop Session in Windows 7 ,right ?
please refer to the following links:
Using Multiple Monitors in Remote Desktop Session
http://blogs.msdn.com/b/rds/archive/2009/07/01/using-multiple-monitors-in-remote-desktop-session.aspx
Best regards -
How to use custom control.
hi all,
how to use custom controls in screen painter.
can i add image to my screen using custom control.
is there any other way to display image on screen.
give me some notes about custom control.
and sample programs to display image and also the use of custom control.
regards,
bhaskar.hi vinod,
u can use the class <b>cl_gui_picture</b> to work around with pictures on the screen
just define a custom control on the screen
create an object of custom container.
create another object of cl_gui_picture giving container name as the parent name...
u can check out the class using the transn se24....
pls post if additional info is required...
Regards,
Vs -
How to use Print Control in Print List.
Please any body can explain me how to use print control when creating Print list?
Thanks in advance.Please any body can explain me how to use print control when creating Print list?
Thanks in advance. -
How to use table control in LSMW
Hello All,
I have requirement to use LSMW , in my using transaction have table control ,I need to pass values in table control . how to use table control in LSMW .Can any one give me the solution for this.
Best regards,
Satya.Note: The recording function records a fixed screen sequence. It cannot be used for migrating data containing a variable number of items or for transactions with dynamic screen sequences!
Tip: It is possible to create a recording via SHDB, generate a program out of this recording, and adopt the program to your needs and registrate the program to be able to use it in LSMW.
Thats means, for creation of project and WBS Elements is not possible through
1. LSMW-BDC (For both CJ01 and CJ20n)
2. LSMW-BAPI (Method: Maintain is not listed )
3. LSME-Standard Batch Direct Input.
Its possible through programmatically(SE38.) either using BAPI Or BDC.
Thanks, -
How to use adobe 5.0 on windows 7 to install 2 upgrades.
how to use adobe 5.0 on windows 7 to install 2 upgrades.
Keith you maybe facing an issue with trying to install Photoshop CS2 on Windows 7 in general. If you have both serial numbers registered, and one of them is a full version, then you can request that your software be unlocked to allow for installation. Our support team will better be able to determine your eligibility for this. You can contact them via chat at http://adobe.ly/yxj0t6.
-
i had nokia n8 and now i want to transfer my contacts from nokia to my new i phone 5, i set up i tune and i cloud account but i don't know how to use do it. i have windows 7 and no outlook
If I wiped my phone I wouldn't have the contacts on my phone to send to my self. I would need to take just the contacts from my back up. I would have to do this through iTunes and I don't see how I can just extract the contacts only from my back up. From what I can figure out it is all or nothing
-
How to use string variable onside quotes
Hi,
i would like to know how to use string variable onside quotes. what i mean is if i have a LOV variable P_STATUS as character string.
and in my PL/SQL function i give a query as
Q AS VARCHAR2(1000) := 'SELECT * FROM EMP
WHERE STATUS = :P_STATUS';
Is this correct. I Know that the above statement works when the LOV is an integer, but when i use a character LOV return value the above statement does not work. how can i get in the character LOV value.
Can someone help me please.
Thanks,
Philip.916753 wrote:
Yes I tried binding all the values separately. It is working, but, I am trying to pass all values by variableBut you can't. The variable is holding a single string value.... that is just 1 value. Your binding are expecting multiple values. You can't bind 1 string value and expect Oracle to magically know how to break your string up into seperate values for the bind variables. What if one of your bind variables actually needed e.g. a comma seperated string as it's value? How would Oracle know that?
You must bind each thing seperately. That's the way cursors work.
, because i have more than 150 tables in which data will be load. that's why i m trying to create a unique procedure to load data one by one table. Otherwise I have to write individual procedures for per procedures.It's a hard life being a software programmer, but somebody's got to do it. Unfortunately there are too many people who try and write "generic" procedures and expect them to just work. I mean why don't Oracle just implement some SQL command so you can do...
execute immediate 'load all my tables';save us all the hassle eh!? ;)
when i write all the columns like
execute immediate (insert_string) using rc1.TOLL_ID, rc1.LANE_ID, rc1.RECEIVED_DATETIME, rc1.LANE_QUERY, c1.EXECUTED_DATETIME
but it is not possible to generate runtime variable thats why I m trying to assign all values to a single variable and use it like
execute immediate (insert_string) using (v_string)
how can I separate the values and ho to use it .Don't use execute immediate. Use the DBMS_SQL package instead and bind your values dynamically with loops to cover all the columns you need etc. -
How to use string format in TextInput?
How to use string format in TextInput?
Ex.
HH:MM:SS when typing message appear in 12:34:56 form.
N,NNN when typing message appear in 1,234,567 form.look up for "Using formatters" in the FB help.
Essentially you'll instantiate a format, NumberFormatter for
numbers for example, and set it's properties like e.g. showing a
thousand separator and then one some event of the TextInput --
valueCommit for example -- you'll do something like:
ti.text = nf.format(ti.text)
this is would also give you opportunity to validate user
input using the same formatter and valid event.
ATTA -
Could someone please tell me where I can info on how to use the controls I.e live pause,forward,rewind etc when watching live shows on my ipad mini please.
well, i can't really tell if i am only allowed one connection with this isp. basically, whenever i plug in the ethernet cord, all of the information gets filled in in the ethernet section of the network, except for the router info. there is router info filled in on my sister's computer whenever i plug the cord into her computer, though. does that mean i can't also use the modem for my computer? sorry, this is both my first time using a mac and my first time using anything other than dial-up, so i'm pretty lost. thanks for the info you've given me thus far.
-
How to change the Control icon in window
hi to all
this is my first post to thiss forum and im using java swing for desktop application im facing a little problem is that how to change control icon on window created by java swing example is here
http://i108.photobucket.com/albums/n15/zerocool_007/window.jpg
how to change the red circuled icon any simple code tips will help mee
zeromyJFrame.setIconImage(img);
where img is an Image object.
The easiest way to create an Image is the following:
Toolkit toolkit = Toolkit.getDefaultToolkit();
Image img = toolkit.getImage("myImage.jpg");
remember you need to import java.awt.Toolkit at the top of your class.
Good Luck,
Eugene
Maybe you are looking for
-
Error during creation of datasource on weblogic 6.1
I was setting up jdbc datasource/connection pool for cloudscape and MS access database on weblogic 6.1. When i am goingto set target afrom available list to chosen it throws an error saying Distributed Management [1 exceptions] Upon clicking on messa
-
Request for help in tuning the server which is running opmn process.
Hi Folks, I request for an help in tuning the server which is running oracle app server opmn process , It is chewing arround 40% of the CPU resource,and our sysadmin is back of me to resolve this issues. any feedback on this is highly appriciated...
-
Well, I got Encore DVD 2 in the Adobe Production Studio Suite; and I've gotta say I'm loving the whole package! Now my problem is, I have burned 25 copies of a project and they play fine in all software DVD players except WinDVD. In WinDVD, there is
-
I get a couple of thousand junk mails a day and have to empty the folder several times a day I have noticed at the bottom of the junk list is an email that has migrated from my inbox. i can move the file back into the correct mailbox. At first i thou
-
How to join InfoObject 0mat_plant to 0material in Multiprovider
Hi Folks, I have a multiprovider which is based on two InfoCubes. In both InfoCubes I have the InfoObject 0material in the dimension. Now I need to add the InfoObject 0mat_plant (which is a InfoProvider) to the multiprovider. 0mat_plant is not in the