How to use Structures of Variant Configuratin in BAPI_QUOTATION_CREATEFROM2

Can any one help me by telling How to use Structures of Variant Configuratin in BAPI_QUOTATION_CREATEFROM2
the structures are :QUOTATION_CFGS_REF, QUOTATION_CFGS_INST, QUOTATION_CFGS_PART_OF, QUOTATION_CFGS_VALUE.
What the necessary parameters to be passed ?
Thanks,
Mohan

Ankur,
I change the Structure Scope to B and Application SD01, but it seems conflict with the config strategy and variant matching. So, in VA21, material can't be determined by system automatically through choosing characteristics. System expands all the material of the top material. Like this:
AA
Aa
aa
ab
Ba
ba
bb
Are there some mistakes in my Item Category configuration?
Thanks.
Edited by: wayne wu on Jun 21, 2011 4:41 AM

Similar Messages

How to use structure QUOTATION_CFGS_VALUE in BAPI_QUOTATION_CREATEFROMDATA2

Hi All,
I am using bapi for quotation creation BAPI_QUOTATION_CREATEFROMDATA2
I want to know how to use structure QUOTATION_CFGS_VALUE in BAPI_QUOTATION_CREATEFROMDATA2.
This structure is used for Variant Configuration.
Can you please help me.
Thanks in advance.
Mohan kumar

Hi
I am also looking for same code(Create quotation using BAPI)..could you please share the code
Thanks a lot

Query: how to use structure and selection and what's the difference between

Query: how to use structure and selection and what's the difference between these two?
Would be appreciated if some experts here give examples to demenstrate on how to use structure and selection in query and what's the difference between these two?
Thanks in advance!

Hi Kevin,
1. Well by default all the KF that you include in your query go into a Key Figure Structure. You can additionally have another structure for defining how your chars are laid out. A common example is a Calmonth structure where you have selections for 12 months, quarers and YTD values. This would be a char structure with different selections (for each month, qtr etc)
2. Yes, a selection with a KF is the same as restricting a KF. You can use am RKF is you have one on the left hand side, or if you need to do this locally in the query, right click the structure and choose New Selection, then proceed to choose your KF and reqd char values.
Hope this helps...

Explain How to use Structure mapping button

Hi All
Iam Developing an application "Implementing and Using Exceptions in Guided Procedures"
Can you please explain How to use Structure mapping button,
Plz give me steps in details
Thanks
Srinivas

Hi
Create a project using 0020 as method.
Max

How to use structure in ABAP program

I developing a report in smartforms but i want some fields to be display on the report but unable to find the relvent table as the field is show in structure.i can not find the actual table . is there any specfic way to find the table .or is there any way to use the fields defind in structure in my ABAP program.

Hi,
May be iam not clear with the question. But why you want to use structure. In report you can define your own structure, also you can declare your fields directly using standard datatypes.
Hope this will help!!!
Amol

How to use structure pointer with Â« Call Library Function node Â» in LabVIEW

I use GetTimeZoneInformation from kernel32.dll. It definition is :
DWORD GetTimeZoneInformation( LPTIME_ZONE_INFORMATION lpTimeZoneInformation );
Where
lpTimeZoneInformation
[out] Pointer to a TIME_ZONE_INFORMATION structure to receive the current time-zone parameters.
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/sysinfo/base/gettimezoneinformation...
I don't know how to set this parameter with my cluster based on the TIME_ZONE_INFORMATION structure.
Your help will be appreciate
Thanks
INKSPEC

INKSPEC wrote:
I use GetTimeZoneInformation from kernel32.dll. It definition is :
DWORD GetTimeZoneInformation( LPTIME_ZONE_INFORMATION lpTimeZoneInformation );
Where
lpTimeZoneInformation
[out] Pointer to a TIME_ZONE_INFORMATION structure to receive the current time-zone parameters.
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/sysinfo/base/gettimezoneinformation...
I don't know how to set this parameter with my cluster based on the TIME_ZONE_INFORMATION structure.
Your help will be appreciate
Thanks
INKSPEC
If creating a wrapper DLL which does the conversion for you is not an option (I think it won't since that would require C programming and if you knew C programming you wouldn't ask this here) then you will have to create a byte array of appropriate length and just configure the Call Library Node to pass this array as an Array of unsigned bytes and as C pointer.
On return you will have to copy out the interesting data at the right position.
First the length of this structure would be:
typedef struct _TIME_ZONE_INFORMATION {
LONG Bias; 4
WCHAR StandardName[32]; 32 * 2
SYSTEMTIME StandardDate; 8 * 2
LONG StandardBias; 4
WCHAR DaylightName[32]; 32 * 2
SYSTEMTIME DaylightDate; 8 * 2
LONG DaylightBias; 4
} TIME_ZONE_INFORMATION
Total 172 bytes
Now the fun part will be to actually get out the information. There are a number of difficulties.
First the strings are 16 bit Unicode so if you are interested in them you will have to call a different Windows API function WideCharToMultiByte function to convert the 16bit Unicode string into an ASCII string. For this part there has been a post here:
http://forums.ni.com/ni/board/message?board.id=170&message.id=123821&requireLogin=False
For the LONG values you would pick 4 bytes at the appropriate offset from the array through the Array Subset function and then typecast it into an int32 and pass that through the Swap Bytes and Swap Words functions to reverse the LabVIEW Big Endian byte swapping in the Typecast function.
The SYSTEMTIME is a structure with eight 2 byte integers so it would be best to use Array Subset again to extract 16 bytes at the correct offset, typecast this into a cluster with eight int16 numerics and pass it through Swap Bytes too.
You see accessing such API functions in LabVIEW directly can get easily quite a mess and that is the reason why creating a wrapper DLL to convert properly between LabVIEW datatypes and C datatypes gets soon the easier solution if you need to interface with more than one or two functions taking such complicated data structures.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to use Structure In TableView

Helo BSP Gurus,
In BAPI_PO_GETDETAIL, upon giving the PO number it outputs the Header and Item Data. Item data is a Table so I can display n BSP using tableview. But header falls under import parameter and being a Structure, How shld I display n BSP using tableview.
Regards
Leo

Hi...
I think you are mentioning about PO_HEADER.
You can't use the Structure in Tableview.
You need to create an internal table or Table type with BAPIEKKOL and use itab in tableview.
Also you may not want to display all the fields..So use Iterator.
Raja T
Kindly close & reward the thread if your issue is resolved..
Re: Can I use a Model Internal Table Parameter in <html:inputfield>
Message was edited by:
Raja Thangamani

How to use Structure in a ABAP Report

Dear Sir,
We are rqeuired to read the data from a Structure "RMCP3" . Please guide us as how can we read the Data from Strcture using a SELECT statement and Where clause .
It will be a great please .
Regards
B Mittal

Hi
Structures are Data Dictionary objects and they are not related to underlying database. So there is no data in a structure, They Have adta only During the Run time.
Data: begin of itab occurs 0.
Include structure <Structure Name>
Data: end of itab.
Reward If Helpfull,
Naresh.

How to use the Time Variants PYTD and Prior Year Annual?

Hi,
We have a time dimension which has the generic columns i.e Month, Year.
We need to calculate the Time variants for the Facts Say Sales. I was able to calculate the Prior Month, Current YTD
I have some doubts regarding the other variants:
1. Prior Year : Does this include the Prior Year Annual?
2. Prior YTD: How to calculate it?
Somehow I am getting the same results for PYTD and Prior Year.
The formula used are :
Prior Year:
AGO(Sales, Year, 1)
PYTD:
AGO(Sales CYTD, Year, 1)
Has anybody encountered similar issue?

I assume the Sales measure is a monthly measure. The Prior year calculation as I described will give you the sales for the same month in the previous year when selecting month in your report. When selecting year it will add up all months of the prior year until now and you will indeed see the Prior year YTD.
If you want to see the total sales for the previous year you have to use the same calculation as 'Prior year' and map it to the year level of your time dimension. This will work as a 'partition by year'.

Can anybody tell me how to use SHD0-tRANSACTION VARIANT

hI,
pL.tell me the procedure to use SHD0 for co01 and CO02 T-CODES

Dear Laxmikanth,
Transaction variant or Screen variant does not works out for T
code CO01 or CO02.
As far I know you can restrict only the plant and order type ,I
dont think you can restrict the user's to change or modify the
BOM Components.
Regards
Mangalraj.S

How to create a new variant and a job sheduled to use it for the ......

How to create a new variant and a job sheduled to use it for the exisisting programs

Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
<b>The commonly used ALV functions used for this purpose are;</b>
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
<b>
How you call this function in your report?</b>
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan

How to use For-Each Structure with Multiple node XML structure

Hi,
How to use for-each (BPEL 2.0) construct for Multinode XML structure.
Here is the easy case: I have list of suppliers specified by supplier
<supplierList>
<supplier>1</supplier>
<supplier>2</supplier>
<supplier>3</supplier>
</supplierList>
Now there is a web service http://hostname/getsupplierdetails/wsdl which accepts one supplier at a time.
like
<supplier>1</supplier>
reponse object is
<message> notfound/found </message>
But how can I use for each of XML node to call this service and collect the result like
<supplierList1>
     <Suppinfo>
        <supplier>1</supplier>
        <message> not found</message>
</suppinfo>
    <suppinfo>
        <supplier>1</supplier>
        <message> not found</message>
</suppinfo>
</supplierlist1>
Thanks

For looping you use foreach loop and , loop for the number of occurences and when constructing response, adding a new element you have to use bpelx:append. Good sample at Enterprise Integration: Oracle SOA Suite 11g: Populating a list or an array in BPEL without using XSLT.

How to use the Variants in SAP Transportation and what is its use ?

Hi experts,
How to use the Variants in SAP Transportation and what is its use & How to create a variant in SAP ?
Can anybody answer this ?
Regards,
Shakti

Hi,
If you are asking about "slection vairants" in SPRO settings of "shipment cost document" then
When it is activated,
each user can have his own slecetion and list criteria for
1. List shippment costs:calculation
2. List shippment costs: settlement
This can be directly saved from VI01 screen by the user.
from environment> lists
This is user specific only.
Hope this helps.
Regards,
Sharan

How to use the structure in the EXIT_SAPMM06E_013 function module

Hello Experts,
Please guide me how to use the structure defined in function modules under table tab in the driver program for smart form to fetch the data. Please post some sample code if available.
Best Regards,
Sandesh.Sreyamsh

Can you please elaborate little bit more what is the actual requirement?

How to use File Adapter with hierarchial Structure?

Hi,
How to use File Adapter with hierarchial Structure like..
Data:
--Header Details:
Line Item Details:
Data
Bcoz I am getting a Flatfile in a hierarchial way as shown below.
Header Details :1
Line Item a
Line Item b
Header Details :2
Line Item c
Line Item d
Kishore

Hey Kishore,
In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
check the link for the needed configuration paramters.
If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
If you have any question i'll be more than happy to assist.
Nimrod Gisis

How to use Structures of Variant Configuratin in BAPI_QUOTATION_CREATEFROM2

Similar Messages

Maybe you are looking for