How to use stylescreated in se 72 in STANDARD TEXT SO10

Hi all,
I have created a style in se72.
Now can i use the style while creating a stAndard text in SO10 and in script.
If yes can anyone let me know how to do that
Thanks

In SO10 go into change/ create mode and from the menu select FORMAT and in this select CHANGE STYLE. A popup with the styles comes up and just slect which ever you want.

Similar Messages

  • How to declare variables in standard text  - so10 t.code

    Hello Friends,
             How to declare variables in standard text  - so10 t.code? Your response will be appreciated much.
    Thanks
    Sri

    For Script & Smartform  Text - &VAR&

  • How to use that arrow/plus sign to expand text on a page...

    Hi all,
    I'd like to learn and find out how to use a symbol or icon or
    whatever to expand text on one of my pages. We've all seen it but I
    have no idea what they're using to do it, in fact I'm not even sure
    what the correct name is! I was going to do a view source to try to
    figure it out, but I can't seem to remember any sites where I've
    seen it.
    Any suggestions are greatly appreciated, thanks.

    Take a look at the SwapClass tutorial from Project VII:
    http://www.projectseven.com/tutorials/navigation/swapclassmenu/index.htm
    Their demo uses SwapClass for a menu, but you can adapt it
    for exactly what
    you're talking about.
    HTH,
    John
    "jcbuche" <[email protected]> wrote in
    message
    news:fq7ac9$l8$[email protected]..
    > Hi all,
    >
    > I'd like to learn and find out how to use a symbol or
    icon or whatever to
    > expand text on one of my pages. We've all seen it but I
    have no idea what
    > they're using to do it. I was going to do a view source
    to try to figure
    > it
    > out, but I can't seem to remember any sites where I've
    seen it.
    >
    > Any suggestions are greatly appreciated, thanks.
    >

  • How to use standard text  so10

    Hello sir
    Here the problem is i want get three company adress in the script..
    Here i  used the satandard text  (so10)  and created three adress  and i went to address window  type
    There
    i written if exgrp =52
    <b> include zadress 1 text id  language E.
    else exgrp=53
    <b> include zadress 2 text id langugage e.
    this one i did in developement client and  i tested and  imported threw scc1 its not reflecting while exectuing.
    so please tell me how to print the 3 comapny address .. and step by step procedure .
    Thankyou
    Regars
    REDDY

    HELLO sir ,
    I done wt  u said but unable to get that address in script .......
    Please check  the flow once which done by me ......
    firsr created 3 texts and went to  the adress window there i used insert option gave standard text ...
    in the address window i gave
    If P_EXGrp -52( &j_1iexchdr-exgrp&)
    include text 1
    elseif P_exgrp=53
    include text 2
    else if P_exgrp=54
    endif .     this the  way i used if condition i ..........  if i changed the  second statement to Only  to "else" its printing the only else part exectuting  in script .
    and by using  RSTXTRAN progarm transported my request .  and by scc1 imported  but iunable to get Please tell me i didnt change the driver progarm .. selection scrrren &J_1iexchdr-exgrp& is one fileld based on this company code should come .. 
    Please let me know how to get ....wt changes i should make Please
    Thankyou,
    Regards

  • How to Maintain documentation (se38) using standard text (SO10)

    Hi,
    I have created standard text using SO10. Now I want to include the standard text in documentation (SE38) section of my ABAP program.
    I tried using /: INCLUDE 'YTEST' OBJECT TEXT ID ST LANGUAGE EN
    But the standard text is not showing up when I click the documentation icon in the selection screen.
    Can you please let me know how to maintain documentation for ABAP programs using Standard Texts.
    Thanks in advance.
    Sincerely,
    Vidya

    Hi Mahesh,
    In SO10, which format key has been used (AS, /*, /:, *.... to show up in documentation). when you used insert->text-> did you use 'expand immediately' check box. If expand immediately option is used, it won't serve our purpose.
    =
      (space)
    Example
    SO10 Yeurope_terms
    Inside Yeurope_terms
    Terms: For Europe
    /*           No Tax for Italy
    Waiting for your reply.
    Sincerely,
    Vidya

  • Use standard text (SO10) in report(SE38) to compose the body of email

    hello experts,
    here i wanna create the body of email with a format, hence i decide to use Standard Text. in this Standard Text, i also maintain some variable such &p_name&( i remember it works  in forms,such script and ssf), while i define p_name as 'demo' in the program and try to transfer p_name to standard text, it fails. while i check the output of standard text, it show &p_name& instead of demo.
    could anyone tell me how to realize this function?
    Thanks in advance.
    Desmond

    Hi,
    try this,
    data:w_field(10) type c VALUE '1234'.
    DATA:wa_head TYPE THEAD.
    data:it_final TYPE TABLE OF tline.
    wa_head-tdname = 'Z_SAMPLE'.  u201CStandard text,refer screen shot
    wa_head-tdid = 'ST'.
    wa_head-tdobject = 'TEXT'.
    wa_head-tdspras = 'EN'.
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
      CLIENT                        = SY-MANDT
        id                            = wa_head-tdid
        language                      = wa_head-tdspras
        name                          = wa_head-tdname
        object                        = wa_head-tdobject
      ARCHIVE_HANDLE                = 0
      LOCAL_CAT                     = ' '
    IMPORTING
      HEADER                        = HEADER
      TABLES
        lines                         = it_final
    EXCEPTIONS
      ID                            = 1
      LANGUAGE                      = 2
      NAME                          = 3
      NOT_FOUND                     = 4
      OBJECT                        = 5
      REFERENCE_CHECK               = 6
      WRONG_ACCESS_TO_ARCHIVE       = 7
      OTHERS                        = 8
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'REPLACE_TEXTSYMBOL'
      EXPORTING
        endline                = 10
      FORMATWIDTH            = 72
      LANGUAGE               = SY-LANGU
      LINEWIDTH              = 132
      OPTION_DIALOG          = ' '
      REPLACE_PROGRAM        = 'X'
      REPLACE_STANDARD       = 'X'
      REPLACE_SYSTEM         = 'X'
      REPLACE_TEXT           = 'X'
        startline              = 1
    IMPORTING
      CHANGED                = CHANGED
      TABLES
        lines                  = it_final

  • How to create REQUEST NUMBER for STANDARD TEXT (SO10)

    how to create REQUEST NUMBER for STANDARD TEXT ( t-cODE SO10)

    you can do this using program RSTXTRAN .
    Text key - object
    Text key - name
    Text key - ID
    Text key - language, then it will store under one transport that can be moved to other system.
    check out the following link.
    http://help.sap.com/saphelp_47x200/helpdata/en/f4/b4a1ed453611d189710000e8322d00/frameset.htm

  • How to populate values to the variables in standard text

    Hi friends,
    I have maintained a standard text in So10 like this invoice number&vbeln&.
    Inside a function module i want to read this text and populate the value to the variable &vbeln&.How to achive this.
    Rgds.

    Thanks Simon but i didn't understand your answer but i will tell you the problem that i want to solve with foreach or iterator
    i have a view that have employeeId and employeeName and ManagerID
    create table employeesView
            EmployeeId           Number,
            EmployeeName      varchar2(100),
            ManagerId             Number
        }i want to make a foreach or Iterator to make
    every Employees with the same manager id to be in the same <af:panelGroupLayout>
    i mean
      <af:foreach or af:Iterator >
           <af:panelGroupLayout >
                   <af:commandButton id="cb1" text="All Employees With Manager Id 1" />
           </af:panelGroupLayout >
           <af:panelGroupLayout >
                   <af:commandButton id="cb1" text="All Employees With Manager Id 2" />
           </af:panelGroupLayout >
           <af:panelGroupLayout >
                   <af:commandButton id="cb1" text="All Employees With Manager Id 3" />
           </af:panelGroupLayout >
      </af:foreach or af:Iterator >How can i do this

  • Standard text (SO10) - 'Where used list'

    Dear all,
    I would know if SAP provide a standard tool that consents to display a 'where used' list for the standard texts.
    I mean, this report has to show where the standard text defined via SO10 are used (SAPScripts, Smartforms...).
    Thanks and best regards
    Davide

    I doubt if there is such report.
    Enjoy SAP.
    Pankaj Singh.

  • How to use mp3 files on a form standard button, instead of wav-files. Need to save space.

    I would like to use mp3 files instead of Wav-files on the standard button, in the forms edit menu. I know it is possible in the interactive menu to add buttons with mp3 sound. But those buttons has not the same options and appearance as the forms buttons. We create learning books with lots of sound files in each PDF, so with wav-files the PDF gets quite heavy in Gb.

    Smokerz – Thanks for the feedback. I managed to get iTunes to find the movie files on my TC by simply dragging the icons of the files on the TC into the Movies folder in iTunes. This immediately made them available for streaming on my Apple TV. Also, I learned with great relief that, despite their large size, dragging icons of my movie files into iTunes did not copy them to the C: drive on my desktop computer. Thus, it looks as if the job is pretty much done. Thanks again for your advice.

  • How to use BAPI in webdynapro through which standard transaction is calling

    Hi All,
    I'm facing problem in web dynapro application.
    When i use BAPI in event on action which in turn calls the standard SAP transaction .
    System gives me error "Error when processing your request".
    The termination type was: RABAX_STATE.
    Please suggest me, The process to call BAPI in web dynapro which returns STD. SAP Transaction.
    Regards,
    Sheetal

    Please check this FM - IDOC_INPUT_SRCLST, atleast you will one rough idea about mentioned FM's

  • How to display the Standard Text (SO10) based on condition in adobe forms

    Hi,
    I have created the Standard texts (through SO10 tr.code) of 4 plant addresses. In the Layout of adobe form, i want to display any one plant address based on the plant number (as a input) and the rest 3 standard text need to be hide. i tried in Form clac to hide, but i unable to succeed. could you please help me, in this regard. 
    Thank you.
    Regards,
    Mallikarjuna

    Hi,
    You can add all the 4 text in your context menu and create an condition for text.
    Example: (LS_HEADER is a structure only for example, you need to decide based on your own form interface)
    Text_1000                                Condition -> LS_HEADER-WERKS = 1000
    Text_2000                                Condition -> LS_HEADER-WERKS = 2000
    Text_3000                                Condition -> LS_HEADER-WERKS = 3000
    Text_4000                                Condition -> LS_HEADER-WERKS = 4000
    The text satisfyling your condition will only be printed and you can assign these text to the same block in PDF form.

  • How to use table in standard text

    Hi,
    I created one standard text using SO10 and I need to populate my internal table data values in the standard text. Below is the standard text i created.
    XXXXXXXXXXXXXXX
    XXXXXXXXXXXXXXXXXXXXXXXXX
    XXXXXXXXXXXXXXXXXXXXXXXXX
    XXXXXXXXXXXXXXXXXXXXXXXXX
    XXXXXXXXXXXXXXXXXXXXXXXXX
    &GV_ASSIGNMENT&   &COSTCENTER&    &ORGUNIT&
    &GV_ASSIGNMENT&   &COSTCENTER&    &ORGUNIT&
    &GV_ASSIGNMENT&   &COSTCENTER&    &ORGUNIT&
    Thanks,
    XXXXXXXXX
    If an employee have multiple assignments, I have to send a mail to org unit head with the above format.
    I created the above format in standard text (SO10). Now how to populate the values in the standard text.
    Thanks,
    Ram

    Hi Ram,
    A standard text like this does not have the concept of looping through data (which is what you'll have to do if there you have a table of data).
    What are you using to generate the mail?  If is is comning from smartform or SAPscript you should use the form to define the layout and the loop, meaning you'll need to split your standard text into smaller texts.
    Regards,
    Nick

  • How to output a logo stored as standard text to excel using OLE

    Hi Experts,
    I have a requirement to write a program which creates an excel spreadsheet to download data from SAP.  The client would like the spreadsheet formatted with merged cells, background colours, different size fonts and in the top left corner of the spreadsheet to show their logo. 
    They have similar functionality in another report, however, this requires a template (containing all of the formatting) to be stored on the user's PC.  They do not want to have to do this with the new download.
    After checking the many postings on this forum I have worked out how to do most of the requirements, but as yet have still not been able to work out how to populate their logo to the spreadsheet.  They already have their logo stored as standard text (SO10), so would prefer to use this if possible.
    Any advise and/or sample code would ge greatly appreciated.
    Thanks
    Sandra

    Hi Surendra,
    We have the same requirement. We want to do some format changes to "Generic FSG Drill Template". I am able to do few changes. But when we run the report, we are able to see PDF, html output. But 'Exce' report comes with blank. Can you help on this. How were you able to see logo in excel file.
    Can you send the suggestions if any to my mail ([email protected])
    Thanks in advance.
    Thanks,
    Techie.
    Edited by: user1138068 on May 30, 2011 7:04 AM

  • How to use search on Flash 8

    I am using Flash Pro 8. I created a .fla file which contains
    several objects, each of them has the ActionScript. Now I want to
    search through all the ActionScript for a variable such as named
    GeneratedXML (already used somewhere in the application).
    So I go to Edit --> Find and Replace or Find Next. Neither
    can locate the "GeneratedXML". But I know there is indeed a
    variable named: GeneratedXML, because I can see it right before me.
    I just want to test the search function of this tool(Flash
    8). I need do a lot of searching and location of a parameters,
    function names, etc throughout the .fla file.
    Then how to use or do a search for a text in (the
    ActionScript) in Flash 8?
    Thanks
    Scott

    If you just click the magnifying glass in an actionscript
    window its only a simple find and replace for that frame.
    Try using the Edit Menu Find and Replace option...
    Find All

Maybe you are looking for