How to use 'Submit' for Program rpsinfo (tcode:cn41n)

Hi Friends,
CN41N is a Hierarchical report of PS Module. Which displays WBS, Network, Project details in Hierarchical view. I want to store the output of this report in internal table for further processing. For this i am using the following code .
SUBMIT rpsinfo
   WITH cn_pspnr-low EQ 'S-0018-01-01-01-01-001'
   EXPORTING LIST TO MEMORY AND RETURN .
CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
      listobject = list_tab
    EXCEPTIONS
      not_found = 1
      OTHERS     = 2.
DATA: BEGIN OF i_asci OCCURS 0,
       data1(5000) TYPE c,
       END OF i_asci.
CALL FUNCTION 'LIST_TO_ASCI'
* EXPORTING
*   LIST_INDEX               = -1
*   WITH_LINE_BREAK          = ' '
* IMPORTING
*   LIST_STRING_ASCII        =
*   LIST_DYN_ASCII           =
   TABLES
     listasci                 = i_asci
     listobject               = list_tab
   EXCEPTIONS
     empty_list               = 1
     list_index_invalid       = 2
     OTHERS                   = 3
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
The above code is not working. Output is not going to memory. But this is working with all other reports which are simple ALV Reports. I think since rpsinfo (tcode:cn41n) is hierarchical report it is not displaying output. Then how do i send the output to the memory. Please suggest the solution.
Thanks in Advance.
Mahender.

if the hierarchical report is displayed using SAP Graphics, then you will never be able to get information from memory because the output is not stored into a SAP list

Similar Messages

How to use SUBMIT for transaction program?

Hello,
Please help me with following requirement.
I need to pass selection screen values from ZReport to transaction F.01 and collect displayed data output in internal table in ZReport and use internal table for further processing.
Please let me know,
1) How to use SUBMIT with transaction code or modulepool program (<b>remember I don't want to submit report program</b>)?
2) How to collect F.01 output data and bring back to Zreport ?
Thanks in advance.

Hi ab,
1. How to collect F.01 output data and bring back to Zreport
The data (of output) can be collected,
for display purpose.
We cannot get the full data, which makes sense.
2. The data shall be collected, in a printable format only,
ie. with vertical lines, horizontal lines (if any) etc.
regards,
amit m.

I am a professional photographer of many years standing and at the moment I have a student for 12 months, who I am teaching how to use various Adobe programs, but to introduce her to video editing, I have purchased Adobe Premier Elements 13 which is less

I am a professional photographer of many years standing and at the moment I have a student for 12 months, who I am teaching how to use various Adobe programs, but to introduce her to video editing, I have purchased Adobe Premier Elements 13 which is less complicated than the Premier Pro that I use. The program works perfectly, except for one thing.... when adding a title to the short video sequence we are working with, if I use a particular font (Metallophile Sp8) which I obtained from my Adobe Typekit, it crashes the program,.... all other fonts work perfectly....can anybody help me please?

clivephoto
What computer operating system is your Premiere Elements 13 running on? And what video card/graphics card does this computer use?
From your description, can I assume that this Mettallophile Sp8 font is being recognized by Premiere Elements 13 to the extent
that it can be seen and remains seen in Titler's list of font choices - even after the crashes?
If you opened a new project, imported nothing, and created a text title in the Titler with this Mettallophile Sp8 font, does the program crash?
Please review the following which discuss fonts and Premiere Elements and determine if anything in it helps.
Fonts & Crashes with Titler
Let us start here and then decide what next.
ATR

How to use i for if condition in a for i in loop?

Hi friends,
I have a question on how to use i for IF condition in a loop, in order to get an efficient programming and results. Here is outlined SQL:
cursor is
select c1,c2,c3 from table1; -- 100 rows returned.
open cursor
loop
fetch c1,c2,c3 into v1,v2,v3;
for i in 1..3 loop
if 'v'||i between 90 and 100 then
v_grade := 'Excellent';
elsif 'v'||i between 80 and 89 then
elsif 'v'||i between 50 and 59 then
end if;
end loop;
close cursor;
This way, I don't need to use a lot of if..then for hard code v1,v2,v3,.... actually I have more v..
But Oracle gave an error of this usage of 'if 'v'||i' or 'v'||to_char(i).
Thanks for any advice in advance!

user508774 wrote:
Thanks for comments and advices. But I didn't get your inputs clearly. Are you saying I don't need to use PL/SQL to achieve this?Correct. Ronel and John showed you the basic approaches. SQL is not a mere I/O language for making read and write calls. It is a very capable, flexible and powerful language. One can solve a problem with a few lines of SQL code, that will take 100's of lines of PL/SQL or Java code.
So do not underestimate what can be done in SQL.
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
EXECUTE IMMEDIATE v_cmd;This code is also wrong. Besides the fact that there is no need for dynamic SQL, this approach creates a brand new SQL statement each loop iteration.
SQL is source code. It needs to be parsed (compiled). The end result is an executable program that is called a cursor. This cursor needs to be stored in server memory (the SQL Shared Pool in the SGA).
The problem with your code is that it is slow and expensive - it generates lots of unique SQL statements that need CPU for parsing and server memory for storage.
These add up to a very significant performance overhead. That is the wrong approach. The correct approach is the same one that you would use in any other programming language.
Let's say you need to use Java to process a bunch of CSV files - exact same CSV layout used by each file. A file needs to be read, processed, and a log file created.
Will you write a Java program that loops through the files, for each file found, write a Java program for processing that file, compile it, then execute it?
Or would you write a Java program that takes the name of the file as input, and then process that file and writes the log file?
The 2nd approach provides a program that can process any of those CSV files - one simply needs to pass the filename as an input parameter.
Your code and approach use the 1st method. Not the 2nd. And that is why it is wrong.
To create a SQL program with parameters is done by using bind variables. Instead of
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
The following SQL source code should be created:
v_cmd := 'UPDATE parts_categ_counts SET w1=:v1, w2=:v2 ..., w9=:v9 WHERE seq= :vseq';
The tokens with the colon prefix (such as :v1), are bind variables. Think of these as the parameters to the SQL cursor.
The server parses this SQL into a cursor. You can now execute the same cursor over and over again, using different bind variables. (just like the 2nd approach above that one would use in Java)
In PL/SQL, this is made even easier as you can code native SQL code with PL/SQL code and use PL/SQL variables in it. The PL/SQL compiler is clever enough to do the SQL parsing, variable binding, and cursor execution for you. So in PL/SQL, you would use:
UPDATE parts_categ_counts SET w1=v1, w2=v2 ..., w9=v9 WHERE seq= vseq;
Where v1 and the others are PL/SQL variables.
That all said - PL/SQL is only used for data crunching, when the processing of data is too complex for the SQL language to deal with. And this is very seldom the case.
The main reason for using PL/SQL it to provide processing flow control, conditional processing and error handling, for SQL code. As the SQL language does not have these features.

How to use standard report program [RPR_ABAP_SOURCE_SCAN]

hi all,
how to use RPR_ABAP_SOURCE_SCAN report program for checking my program. when i run it its asking me the report name and i gav it but, its showing me the error message as 'ENTER SEARCH STRING' .
SO I NEED TO KNOW WHERE I DID WRONG.
thanks in advance,
suresh babu aluri.

hi suresh,
i hav tried that, its working
enter like this,
<b>program name : zpy_text</b>
under search criteria.
<b>Find string : select</b>
"******enter any string that is in that program, usually select will be there, then execute.
With Regards,
S.Barani

How to achieve SUBMIT for the current page when I click other tab?

Problem: How to achieve SUBMIT for the current page when I click other tab?
Description: I have a two-page application and each page associates with a tab. Say page1 associates tab1 and page2 associates tab2. In each page, I have a submit button, a after submit process associated to the submit button, and a tabular form. For page1, I fill out the fields and hit the button. The page1 will appear again and I can see the data I have insert. However, If I fill out the fields and click the tab2 (page 2) instead. when I come back to page1, the data I filled out are all gone. Is there any way in HTML DB to force the submit in the current page after you click other page. If use JavaScript, what is code looks like.
Appreciate your time and your answer.
Mike

Scott,
just for clarity, if I understood correctly what you said there are two possibilities:
1) keep the standard tab branch and give up the possibility of validating page items. Below you can find an example of such cases.
2) Replace the template substitution string and perform a "custom" button-like submit also adding a branch to the main page associated with the tab. Page items will be validated if the branch firing point is set after the validations.
I couldn't find an example of the latter, but I found easily an example of the former:
it's the "Report attributes", page 420 of app 4000.
If you enter 'aaa' in the "Number of rows" form field and then you press "apply changes", htmldb correctly displays an inline error message saying that the value must be numeric. On the contrary, if you click on the "Region Definition" tab, htmldb takes you to a page showing an oracle exception:
ORA-20001: Error in DML: p_rowid=4785927011172906402, p_alt_rowid=ID, p_rowid2=, p_alt_rowid2=. ORA-20001: Invalid numeric value aaa for column PLUG_QUERY_NUM_ROWS
Bye,
Flavio

How to Use 'uid' for AD Users Without Domain Name For User Log in OAM

How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
How can we remove @abc.com
We are using OID 11g and OAM 11g
Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
We are in OID 11g.
Any help on this greatly appreciated.

I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
Thanks,
Hussein

How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro

How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro because it's not working =(

The cheap & easy way is to just drag the app to the Trash.
If you want to get all of the associated files use an app deleting app like the free AppCleaner;
http://www.freemacsoft.net/appcleaner/
Just drag an app and drop it on the AppCleaner icon in the Dock and it will find and present to you all the files it thinks are associated with the app. You can uncheck any that you want to keep and then let AppCleaner Trash the rest.

My 9 year old somehow ran up $99.00 while playing games on my iPad. How do I submit for a refund?

My 9 year old son somehow ran up $99.00 in app purchases on my iPad. How do I submit for a refund? I have been all over the website but of course, this is the ONE thing I can't find.

There are no refunds.
You can try contacting itunes support and asking for an exception.
Click "Support" at the top of this page, then click the link under "Contact Us"

Install Sun ONE Directory Server 5,2 & how to use it for authenticate user

Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
I read the forum seeking for anwser and i get confuse
Thanks for the help and sorry for any inconvenient
Message was edited by:
Aku_28
Message was edited by:
Aku_28

I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
Chapter 14 System Administration Guide: Naming and Directory Services
Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms".

But how to use submit??

but how to use submit?? i mean how to generate an event thru submit and how to receive these values in the next page

but how to use submit??You can do it by using Simple HTML Code
<INPUT TYPE="SUMBIT" VALUE="SUBMIT">
i mean how to generate an event thru submit and how to receive these values in the next pageTo generate an event through Submit! You need to do this using java script.
I think you are talking about assingning some values on the click of submit and collecting those values in the next page!
To do that
keep some input fields in page1. Then try to assign the values to those input fileds using javascript through onclick event.
<INPUT TYPE="SUMBIT" VALUE="SUBMIT" onclick="javascript:callSomeFunc()">
In
callSomeFunc() {
//Assign values to the hidden fields
In next page say page2 collect those values using request.getAttribute(" InputHiddenFieldsName);
That's it.

How to use parathesis for OR and AND OPERATOR...

oracle 10g
Hi
Guys please help how to use parathesis for this below query its giving same output values for all my similar queries
select count(balance) from balanace_tb
where kk_code in(111,112,113)
or
kk_code in(111,1124,115,116) and sec_id in(50,51,52,53)
or
kk_code in(100,164,215,161) and sec_id in(53,51,52,59)
or
kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59)
or
kk_code in(100,164,215,16) and sec_id in(53,51,52,59)
and
open_date=20130331

I assume you're looking for something like this?
select count(balance) from balanace_tb
where (   kk_code in(111,112,113)
       or (kk_code in(111,1124,115,116) and sec_id in(50,51,52,53))
       or (kk_code in(100,164,215,161) and sec_id in(53,51,52,59))
       or (kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59))
       or (kk_code in(100,164,215,16) and sec_id in(53,51,52,59))
and open_date=20130331
If not, please post some example data, the expected output from that data, and the logic you are expecting to use, as well as posting your database version.
Re: 2. How do I ask a question on the forums?

How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split

Hi Experts, I have the follow delivery:
Item        Material   Deliv.Qty    Un
10     739911     2     PQT
And I want to obtain this:
Item        Material   Deliv.Qty    Un                            Batch
10     739911     0     PQT
900001     739911     1     PQT          ZZ00060
900002     739911     1     PQT          ZZ00061
But, after using the Bapi I obtained this:
Item        Material   Deliv.Qty    Un                            Batch
10     739911     1,372     PQT
900001     739911     0,314     PQT          ZZ00060
900002     739911     0,314     PQT          ZZ00061
So as you can see the problem is with the "Deliv.Qty". I expected:
Item        Deliv.Qty
10            0
900001     1
900002     1
But I obtained:
Item        Deliv.Qty
10     1,372
900001     0,314
900002     0,314
The parameters that I am using in the Bapi are:
HEADER_DATA
DELIV_NUMB = 801174646
HEADER_CONTROL
DELIV_NUMB = 801174646
DELIVERY = 801174646
TECHN_CONTROL
UPD_IND = U
ITEM_DATA (three records):
DELIV_NUMB = 801174646
DELIV_ITEM = 000010
MATERIAL = 739911
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
DELIV_NUMB = 801174646
DELIV_ITEM = 900001
MATERIAL = 739911
BATCH = ZZ00060
HIERARITEM = 000010
USEHIERITM = 1
DLV_QTY = 1
DLV_QTY_IMUNIT = 1
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
DELIV_NUMB = 801174646
DELIV_ITEM = 900002
MATERIAL = 739911
BATCH = ZZ00061
HIERARITEM = 000010
USEHIERITM = 1
DLV_QTY = 1
DLV_QTY_IMUNIT = 1
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
ITEM_CONTROL (three records):
DELIV_NUMB = 801174646
DELIV_ITEM = 000010
CHG_DELQTY = X
DELIV_NUMB = 801174646
DELIV_ITEM = 900001
CHG_DELQTY = X
DELIV_NUMB = 801174646
DELIV_ITEM = 900002
CHG_DELQTY = X
So I am missing something but I don't know what.
Can any one help me with this please?
PD: I have looked the following forums in order to use the Bapi:
How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split
batch split using BAPI_OUTB_DELIVERY_CHANGE
Re: Help in BAPI_OUTB_DELIVERY_CHANGE(batch-split)
BAPI_OUTB_DELIVERY_CHANGE - Batch Splits don't work
Help for BAPI_OUTB_DELIVERY_CHANGE

Hey,
My code is for the inbound delivery but it should work the same.
Give this a try.
REPORT z_delivery_batch_split.
DATA:header_data LIKE bapiibdlvhdrchg,
header_control LIKE bapiibdlvhdrctrlchg,
delivery LIKE bapiibdlvhdrchg-deliv_numb,
ls_return LIKE bapiret2,
item_data TYPE TABLE OF bapiibdlvitemchg,
item_control TYPE TABLE OF bapiibdlvitemctrlchg,
ls_item_data LIKE bapiibdlvitemchg,
ls_item_control LIKE bapiibdlvitemctrlchg,
return TYPE TABLE OF bapiret2 WITH NON-UNIQUE KEY type.
header_data-deliv_numb = '1800005005'.
header_control-deliv_numb = '1800005005'.
delivery = '1800005005'.
ls_item_data-deliv_numb = '1800005005'.
ls_item_data-deliv_item = '900001'.
ls_item_data-material = '000000000020067722'.
PERFORM create_batch CHANGING ls_item_data-batch.
ls_item_data-hieraritem = '000010'.
ls_item_data-usehieritm = '1'.
ls_item_data-dlv_qty = 80.
ls_item_data-dlv_qty_imunit = 80.
ls_item_data-fact_unit_nom = '1'.
ls_item_data-fact_unit_denom = '1'.
ls_item_data-sales_unit = 'EA'.
ls_item_data-base_uom = 'EA'.
APPEND ls_item_data TO item_data.
ls_item_data-deliv_numb = '1800005005'.
ls_item_data-deliv_item = '900002'.
ls_item_data-material = '000000000020067722'.
PERFORM create_batch CHANGING ls_item_data-batch.
ls_item_data-hieraritem = '000010'.
ls_item_data-usehieritm = '1'.
ls_item_data-dlv_qty = 60.
ls_item_data-dlv_qty_imunit = 60.
ls_item_data-fact_unit_nom = '1'.
ls_item_data-fact_unit_denom = '1'.
ls_item_data-sales_unit = 'EA'.
ls_item_data-base_uom = 'EA'.
APPEND ls_item_data TO item_data.
ls_item_control-deliv_numb = '1800005005'.
ls_item_control-deliv_item = '900001'.
ls_item_control-chg_delqty = 'X'.
APPEND ls_item_control TO item_control.
ls_item_control-deliv_numb = '1800005005'.
ls_item_control-deliv_item = '900002'.
ls_item_control-chg_delqty = 'X'.
APPEND ls_item_control TO item_control.
break cgavin.
CALL FUNCTION 'BAPI_INB_DELIVERY_CHANGE'
   EXPORTING
     header_data          = header_data
     header_control       = header_control
     delivery             = delivery
*   TECHN_CONTROL        = TECHN_CONTROL
   TABLES
*   HEADER_PARTNER       = HEADER_PARTNER
*   HEADER_PARTNER_ADDR = HEADER_PARTNER_ADDR
*   HEADER_DEADLINES     = HEADER_DEADLINES
     item_data            = item_data
     item_control         = item_control
*   ITEM_SERIAL_NO       = ITEM_SERIAL_NO
*   EXTENSION1           = EXTENSION1
*   EXTENSION2           = EXTENSION2
     return               = return
*   TOKENREFERENCE       = TOKENREFERENCE
*   HANDLING_UNIT_HEADER = HANDLING_UNIT_HEADER
*   HANDLING_UNIT_ITEM   = HANDLING_UNIT_ITEM
*   PARTIAL_GR_OBJECTS   =          PARTIAL_GR_OBJECTS
READ TABLE return
INTO ls_return
WITH TABLE KEY type = 'E'.
IF sy-subrc = 0.
   MESSAGE ID ls_return-id TYPE ls_return-type NUMBER ls_return-number WITH ls_return-message_v1 ls_return-message_v2
   ls_return-message_v3 ls_return-message_v4.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait          = 'X'.
break cgavin.
*&      Form CREATE_BATCH
*       text
*      <--P_LS_ITEM_DATA_BATCH text
FORM create_batch CHANGING p_ls_item_data_batch.
   DATA: ls_bncom TYPE bncom.
   ls_bncom-matnr = ls_item_data-material.
   ls_bncom-werks = 'C333'.
   ls_bncom-lgort = '3000'.
   SELECT SINGLE mtart
     FROM mara
     INTO ls_bncom-mtart
     WHERE matnr = ls_bncom-matnr.
   CALL FUNCTION 'VB_NEXT_BATCH_NUMBER'
     EXPORTING
       matnr                          = ls_bncom-matnr
       werks                          = ls_bncom-werks
       check_batch                    = 'X'
       check_material                 = ''
       message_when_auto              = ' '
       x_bncom                        = ls_bncom
       lock_batch                     = ' '
     IMPORTING
       new_charg                      = p_ls_item_data_batch
     EXCEPTIONS
       no_material                    = 1
       no_plant                       = 2
       material_not_found             = 3
       plant_not_found                = 4
       no_batch_handling              = 5
       batch_exist                    = 6
       no_number                      = 7
       illegal_batch_number           = 8
       interval_not_found             = 9
       object_not_found               = 10
       interval_overflow              = 11
       error_automatic_batch_number   = 12
       cancelled                      = 13
       automatic_batch_num_not_active = 14
       OTHERS                         = 15.
   IF sy-subrc = 0.
     CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
       EXPORTING
         wait = 'X'.
   ENDIF.
ENDFORM.                    " CREATE_BATCH

Need documents for how to use OAM for APPS DBAs

Hi All,
Need documents/pdfs, how to use OAM for APPS DBAs.
Thanks a lot in advance

Hi,
For R12 ,refer the Oracle E-Business Suite System Administrator's Guide - Configuration part no:E12893-03 (http://download.oracle.com/docs/cd/B53825_04/current/acrobat/121sacg.pdf)
For 11i version pls chk :
Oracle Applications System Administrator's Guide - Configuration (zipped) B13925-06 (http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115sacg.zip)
--Rk

How to use offset for select-option parameter ?

Hi experts
could anybody please let me know how to use offset for select-option parameter. i can able to use offset for table fields, variabiles and all , but don't know how to use for parameters.
following is my code
SELECT-OPTIONS: s_prctr FOR vbsegs-prctr OBLIGATORY.
here "prctr" length is 10.
i'm using two tables 1. vbsegd-bupla
                                2. vbsegs-prctr
here prctr+6(4) = bupla.
"Bupla" length is 4
SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
                                                             WHERE belnr = it_vbkpf-belnr
                                                               AND gjahr = it_vbkpf-gjahr
                                                               AND bukrs = it_vbkpf-bukrs
                                                               AND bupla IN s_prctr.
the above statement is not working as prctr and bupla lenths are different. here i want to use offset.
SELECT belnr gjahr bukrs prctr sgtxt buzei FROM vbsegs INTO CORRESPONDING FIELDS OF TABLE it_vbsegs FOR ALL ENTRIES IN it_vbkpf
                                                            WHERE belnr = it_vbkpf-belnr
                                                              AND gjahr = it_vbkpf-gjahr
                                                              AND bukrs = it_vbkpf-bukrs
                                                              AND prctr IN s_prctr.
this is working as prctr and s_prctr lengths are equal.
could anybody please help me out in this.
Thanks in advance.
regards
satish

Below code will work for you.
SELECT-OPTIONS: s_prctr FOR vbsegs-prctr OBLIGATORY.
RANGES: s_bupla FOR vbsegd-bupla.
s_bupla[] = s_prctr[].
DELETE ADJACENT DUPLICATES FROM s_bupla.
SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
                                                              WHERE belnr = it_vbkpf-belnr
                                                                AND gjahr = it_vbkpf-gjahr
                                                                AND bukrs = it_vbkpf-bukrs
                                                                AND bupla IN s_bupla.

How to use 'Submit' for Program rpsinfo (tcode:cn41n)

Similar Messages

Maybe you are looking for