How to use template to print just 1 photo onto CD or DVD?

I know that PSE 11 has a template that allows you to prepare a picture directly onto a CD od DVD.  The templates are much too complicated for what I need.  How do I get to place just one picture & move it a little if necessary?
Thanks in advance

Are you trying to create a CD/DVD jacket?
You may delete the extra frames (select the layer and hit delete) and just have one for this picture.
Thanks
Andaleeb

Similar Messages

  • How to print a photo onto A4 paper NOT photo paper

    How do I print a photo onto A4 paper from my ipad using an air printer INSTEAD of onto photo paper?  I can't find anywhere to change the settings.

    I use the HP Printer Control app.
    http://i1224.photobucket.com/albums/ee374/Diavonex/08300eb956e971ef4aa57fe9dfe9c 626_zps6aa54a01.jpg

  • Can I use Deskjet k109a printer for photo printing?

    Can I use Deskjet k109a printer for photo printing?

    Hi,
    Yes, your printer can print photos as mentioned in the following link:
       http://www8.hp.com/in/en/products/printers/product-detail.html?oid=3811379
    Actually any printer can be used for photo printing, the results may not be the same.
    Hope this helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to use AVDocPrintPagesWithParams for printing without any prompt dialog or alert message ?

    Hi Friends,
    I have a problem to print the pages of a pdf, but with out any dialog box prompt. So I choosed the api AVDocPrintPagesWithParams(avDoc, avDocPrintParam);
    But I don't know how to set parameter for 2nd parameter of the funtion. My requirement is I want to print pdf's using default printer of the system i.e. Print As PDF using Abode PDF print.
    Page Dimension should be same as previous, with postscript value 3 (best print).
    I have used AVDocPrintPages (AVDoc doc, ASInt32 firstPage,ASInt32 lastPage, ASInt32 psLevel, ASBool binaryOK,ASBool shrinkToFit); But it gives an error message for some pdf's that PDF may not printed correctly because font information couldn't be found.
    So can anyone let me know please how to set the parameter of AVDocPrintParam, so that I can use AVDocPrintPagesWithParams and do the same job.
    Thanks and Regards,
    Saffiuddin Sheikh.

    Dear lrosenth,
    I am into an operation where I have check whether each objects falls inside my rectangular region or not. For this I am taking help of BBox and matrix information. The problem is that when I find PDF's those have form or container objects, their matrix and BBox is depenedent on matirx of the form or container containing them.
    In most cases by adding(concetinating ) the matrix value of form and the element gives the correct matrix, BBox value, but some cases I am yet to understand the behaviours. So to avoid these form and container for our immidiate project delivery, we are using this option to print the pdf and then process for checking the position of elements.
    My original requirement is :
    How to know objects position inside a form or container ?  
    This is just an alternative time being way to achieve the task. But if you have any idea of how to detect postion of objects inside form/container then please let me know. 

  • How to use Template manager in Adobe Designer

    Hi,
    I am new to WebDynpro. I am trying to import templates in Webdynpro Adobe Designer.
    In the Interactive Form Designer, there is a Menu called "Tools", which has option "Template Manager".
    When I select a template there is only a buttion Set Selected as default after i click it but nothing happen!! Can anyone please let me know how to use the Template Manager?
    Thanks.
    Edited by: bo wang on Jan 15, 2008 9:34 AM

    Yes, here you dont have option of using standard template. In this case, just right click on the Project name shown in WD perspective on the left hand side of screen and check the Projectlocation in Properties --> Info.
    go to "Projectlocation"\src\configuration\Components. Here you can find the XDP file. Open this XDP file, in this XDP you have File option. Select the template, and save the file.
    This change will appear in WD.
    With regards,
    Amit

  • How to use template or fragment in PDF form

    Hi Expert,
    As required by project, I want to create a sample form only with company logo in header and address info in footer. Then this sample form can be made as a template. Any new form development will use this template form, no need to maintain logo and footer one by one.
    above is my requirement. In transaction SFP, I can see Tools->Template manager->add template. I tried to save my sample form as a template, but when preview it, no displaying but with error saying "not well format".
    Can anyone help me? I just want to create and use a custom template or fagment (it is said Fragment can also reuse to meet my requirement. but I also don't know how to use fragment).

    Hi
    I'm also starting with hierachical tree (HTree) and I got an example from any Oracle examples or whatever. It works with the 'hr' schema (employee, manager, department).
    In the case that I'm not finding any tutorial about htree, I'm taking this one as an example to build my own htree. If you are interested, I can email the example to you.
    regards
    remo

  • Don't know how to use the air print with my ipads.

    i just bought an mg3222 printer and i don't know how to figure out how to use air print with my ipad and ipad minis. Can anybody help??? Thanks

    Hello.
    In order to use the printer with your iOS devices, please make sure that the units are all connected to the same WI-Fi router.  Once this has been done you should be able to print.
    The initial Wi-Fi setup of the MG3222 would have to be done from a compatible Windows or Mac OSX computer.
    If additional assistance is needed, feel free to call us at 1-800-OKCANON.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How to use Applescript to print out a certain calendar at 7am every morning?

    Hey guys,
    I am trying to use AppleScript to print out one of my calendars each day at 7am every morning.
    I have come up with this so far:
    tell application "Calendar"
           view calendar "My Appointments" at (my (current date))
           switch view to day view
           activate
                        tell application "System Events"
                     keystroke "p" using command down
                     delay 1 -- (seconds)
                     tell process "Calendar"
                                                      tell window "Print"
                                                                     if value of checkbox "Calendar Keys" is not 0 then
                                      click checkbox "Calendar Keys"
                               end if
                                                      end tell
                                       end tell
                        end tell
    end tell
    The problem with this is that it will print out whatever calendars are currently viewable. I can't figure out how to tell it to deselect other calendars and just select the one I want. I also want to tell it to print this out at 7am every morning.
    Any help would be very appreciated!

    If you wanted to do the printout over multiple days, you would be best to loop through each day's events in the way the current script does, but to put a new loop around it that gets each new day's data:
    --opens a temporary file
    set fileRef to open for access ((path to desktop) as string) & "meetings.txt" with write permission
    --effectively empties the file
    set eof fileRef to 0
    tell application "Calendar"
              set dayCount to 9 --this will be the number of days to look forward (not including today)
              repeat with currentDay from 0 to dayCount
                        set startList to {}
      --get's today's date
      --set startRange to ((current date) + 12 * days) -- I used this for testing, to point to a day that had many appointments.  I've left it so you can use it, too.
                        set startRange to ((current date) + (currentDay * days))
      --set the start of the range to previous midnight
                        set hours of startRange to 0
                        set minutes of startRange to 0
                        set seconds of startRange to 0
      --set end of the range to next midnight
                        set endRange to (startRange + 1 * days)
      --get today's events
                        set todaysEvents to get (events of calendar "My Appointments" whose (start date is greater than startRange) and (end date is less than endRange))
      --make a new list with start time of the event for sort purposes
                        repeat with theEvent in todaysEvents
                                  set end of startList to {startdate:start date of theEvent, eventID:theEvent}
                        end repeat
      --sort using a bubble sort (suitable for short lists)
                        repeat with i from 1 to (count of startList) - 1
                                  repeat with j from i + 1 to count of startList
                                            if startdate of item j of startList < startdate of item i of startList then
                                                      set temp to item i of startList
                                                      set item i of startList to item j of startList
                                                      set item j of startList to temp
                                            end if
                                  end repeat
                        end repeat
      --empty the original list
                        set todaysEvents to {}
      --repopulate the list in correct chronological order
                        repeat with theEvent in startList
                                  set end of todaysEvents to eventID of theEvent
                        end repeat
      --write today's date to the file
      write (date string of startRange & return & return) to fileRef
      --if there are no events, write this to the file as well
                        if length of todaysEvents is 0 then
                                  write "No events" & return & return to fileRef
                        else
      --process each event into format: hh:mm-hh:mm/new line/event summary
                                  repeat with theEvent in todaysEvents
                                            set startdate to start date of theEvent
                                            set enddate to end date of theEvent
                                            set startHours to hours of startdate as string
                                            if length of startHours is 1 then set startHours to "0" & startHours
                                            set startMins to minutes of startdate as string
                                            if length of startMins is 1 then set startMins to "0" & startMins
                                            set starttime to startHours & ":" & startMins
                                            set endHours to hours of enddate as string
                                            if length of endHours is 1 then set endHours to "0" & endHours
                                            set endMins to minutes of enddate as string
                                            if length of endMins is 1 then set endMins to "0" & endMins
                                            set endTime to endHours & ":" & endMins
      --write the event to the file
                                            set theSummary to (starttime & "-" & endTime & return & summary of theEvent & return & return) as string
      write theSummary to fileRef
                                  end repeat
                        end if
      write return to fileRef
              end repeat
    end tell
    --close the file
    close access fileRef
    --print the file
    set theFile to (((path to desktop) as text) & "meetings.txt") as alias
    tell application "TextEdit"
              print theFile without print dialog
    end tell

  • How to use javascript to print on the client side

    hi all,
    Now i'm facing a problem:
    I want to use javascript to print something(for example, a table) on the client side. So i must get a connection with the printer installed in the client computer.
    some says that getObject() function can do this,but i don't know how?
    Who please help me!

    window.print();

  • How to use Smartform to print check as payment method?

    Actually I'm using Sapscript to print checks as payment method.
    The configuration is at OBVS transaction, but at detail of payment method in "form data" option I can only choice Sapscripts.
    How can I to migrate Sapscript existing to new Smartform to print check as payment method?

    Hi,
    Please check this path :
    Financial Accounting (New) > A/R A/P > Business Transactions > Outgoing Payments > Automatic Outgoing Payments >
    Payment Media > Make settings for classic payment medium programs.
    Here you assign your smart form and the relative program.
    Regards,
    Sadashivan

  • How to use ikons rather then actual photos on e-mails?

    How do I use ikons instead of actual photos (jpg's) as attachments on E-mails? The same is applicable to "written attachments", I would like to attach them as file ikons. How can this been done?
    Thanks,
    Hank

    Hey Hank Wefers,
    Thanks for using Apple Support Communities.
    Mail (Mavericks): Add attachments
    http://support.apple.com/kb/PH14914
    Add photos and other files:
    Drag files from the Finder, iPhoto, or another app into your message. Or click the Attach icon to choose a file. For photos, you can click the Photo Browser icon and drag a photo into your message. By default, Mail inserts images in their actual size.
    Mac OS X Mail: About PDF attachments
    http://support.apple.com/kb/ta22343
    Control-click the icon or visible portion of the PDF and choose "View in Place" or "View as Icon" as appropriate from the shortcut menu. Note that this only affects how you see the PDF in this message's window, it is not a permanent change.
    Have a nice day,
    Mario

  • How to use template.fmb file within form builder

    Hi
    I have created forms without using template.fmb file
    and deploy them on EBS then they working fine
    But when I try to use template.fmb file then it gives an error
    following are the steps :
    1:open template.fmb file with form builder
    2:rename that file with XXXX.fmb
    compile that file and deploy XXXX.fmb file in AU_TOP
    after that
    in putty i m trying to create XXXX.fmx file in same TOP but it gives an error
    Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
    Forms 10.1 (Form Compiler): Release - Production
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    PL/SQL Version 10.1.0.5.0 (Production)
    Oracle Procedure Builder V10.1.2.3.0 - Production
    Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
    Oracle Multimedia Version 10.1.2.0.2 (Production)
    Oracle Tools Integration Version 10.1.2.0.2 (Production)
    Oracle Tools Common Area Version 10.1.2.0.2
    Oracle CORE 10.1.0.5.0 Production
    Compiling package specification APP_CUSTOM...
    No compilation errors.
    Compiling package specification APP_CUSTOM...
    No compilation errors.
    Compiling package body APP_CUSTOM...
    Compilation error on package body APP_CUSTOM:
    PL/SQL ERROR 302 at line 22, column 19
    component 'DISABLED' must be declared
    PL/SQL ERROR 0 at line 22, column 5
    Statement ignored
    PL/SQL ERROR 201 at line 40, column 5
    identifier 'APP_WINDOW.CLOSE_FIRST_WINDOW' must be declared
    PL/SQL ERROR 0 at line 40, column 5
    Statement ignored
    Compilation errors have occurred.
    Form not createdfollowing is command
    $ frmcmp_batch module=$AU_TOP/forms/US/XXXX.fmb userid=APPS/apps output_file=$AU_TOP/forms/US/XXXX.fmx module_type=form batch=NO compile_all=special

    for you question - EBS General Discussion General EBS Discussion
    Compiling Forms In R12
    and search on forum

  • How to use the spotlight search for photos imported onto an apple ipod model MB528BT

    I have an apple ipod model MB528BT version 4.2.1 (8C148) Im think its an iPod touch as opposed to the old iPod but cannot be certain. So first of all does this model number mean anything and/or can I confirm myself via the unit itself?
    Assuming its an iPod Touch my question is :-
    I have copied photos from a dvd I purchased for identifying birds onto my iMac which I readily search via spotlight.
    Having downloaded these photos onto my ipod when I conduct a spotlight search it only finds the birdsong but not the image! Cannot get into settings for spotlight to set for images. If of course this is the answer.
    Anyone know the answer please!
    Thanks David

    "also i use imessage alot so when somebody sends a message who will get it the ipad or the ipod?"
    Both
    You can sync as many ipods/ipads/iphones as you like to one computer.

  • How to use Templates in JSP.

    Hi,
    is any body knows how to apply templates In JSP technology.
    I was wondering if some can give some example or link to a working Example
    Thanks in Advance.

    Hi ,
         Try this URL.
    http://www.javaworld.com/javaworld/jw-09-2000/jw-0915-jspweb.html
    OLabora.

  • Flex 3  :How to use trace for printing data in console

    Hi ,
    I heard that we can use trace to print data on to Flex Builder 3 console . But when i tries it was of no luck .
    The below is a simple program , in which i was out of luck .
    public function callMe():void
                trace("AAA");
    <mx:Button id="Register" name="Register" label="Register" height="23" click="callMe()"/>
    Here in the above porogram , after clicking the Button , i cant see 'AAA 'related  inside my Flex Builder .
    Any help ??
    Thank you .

    Hi Kiran
                Make a break point at trace line and debug the application  There u can find the message u typed in console..  trace works only under debugging mode... not in development mode ..
               Have a nice day
    Thanks
    Ram

Maybe you are looking for

  • Office 2013 upgrade so that users keep individual properties

    How do I set up an Office 2013 upgrade msi so that the individual user can keep their current properties? The msi will be sitting in a Skydrive account.  I need to upgrade  about 25 remote users to Office 2013. These users are in different locations,

  • Use an incoming video feed as camera source for Adaobe Connect

    We are looking for a way to use an incoming video signal - say, from a Skype video chat - as the "camera source" for an Adobe Connect webcast. So instead of using the attached webcam, the host of our meeting would be able to broadcast the Skype video

  • Last line of text missing in popup when generated

    Hi all, We're experiencing a puzzling problem where the last line of text in any topic that displays in a popup from another topic is missing (not shown). However, if you view the topic within a regular browser window, the last line of text is presen

  • Backup iTunes Library on External HardDrive ?

    iTunes should be made on an option to be able to backup the entire library and an external hard not only on DVD or CD?

  • Copying Text Between Illustrator Files

    Hello, I am creating a new document layout in Illustrator CC based on content from an existing document.  I need to paste text from the original document into the new document and reformat it into the style of the new doc.  Is there a way that I can