How to Use Temporary table on report builder

Hi community!
Well, i'm trying to build a temporary table based report in Oracle Report Builder. in "After Parameter Form Trigger" I've placed a stored procedure that populate a temporary table and I've based my report on it. The problem is Report shows no data. When i execute this procedure directly on database and i perform a select on my temporary table, it show all inserted data.
I hope somebody can to help me because I tried many ways to build this report with my temporary table and always looks blank.

Temporary tables are session specific.
If particular session is closed then no data will be found on your temporary table in an another session.
My suggestion is, on "After parameter form" trigger you directly populate the GTT without using procedure.
Hope this will help.

Similar Messages

  • How to use Temporary Table in PL-SQL

    In MySQL there is no Temporary table concept.
    So for intermediate calculation I have created a table as below
    create table SequenceTempTable
    SessionId VARCHAR(50),
    Sequence VARCHAR(500),
    CreatedDate DATE
    ) ENGINE=MEMORY;
    Whenever I invoke a SP, I load the data into SequenceTempTable using Session Id as below
    CREATE PROCEDURE `GetSequence`(
    IN Start_Date VARCHAR(25),
    IN End_Date VARCHAR(25)
    BEGIN
    SELECT UUID() INTO v_SessionId;
    INSERT INTO SequenceTempTable values (v_SessionId,'1,2,5,3',now());
    required code
    DELETE FROM SequenceTempTable WHERE SessionId = v_SessionId;
    COMMIT;
    END;
    i.e. I have created a table as temporary table (created once),
    and load the data using Session Id and once session specific intermediate computation done,
    I deleted the session specific data.
    Could you give me examples of How to use Temporary table in PL-SQL code with respect to my above example.
    Because I have gone through creating Temporary table but I stuck with use in PL-SQL. I mean to say Is there any need of creating table in advance before invoking SP.
    And one more thing as in MySQL temp table I created which is using MEMORY engine i.e. this table will always be in MEMORY so there is no need of writing data on disk.
    Regards
    Sanjeev

    Hi Sanjeev
    Read about GTT here
    http://www.oracle-base.com/articles/8i/TemporaryTables.php
    GTT always contains just session specific data. \
    In case you want to use the GTT in the same session again you can use option
    ON COMMIT PRESERVE ROWS;
    Or if it is used just once in the session use can use
    ON COMMIT DELETE ROWS;
    Do remember that for GTT the data of one session can not be accessed in other session.
    Also you can go away with Delete from GTT if not used again in same session.
    Regards
    Arun

  • How to use special characters in Report Builder

    Hi everyone,
    I wonder if you guys can help me. I'm trying to change our Invoice hearders from English to Portuguese. Eg, I've changed this English heading
    ("FOR ACCOUNT QUERIES CONTACT") to this Portuguese heading ("PARA CONSULTAS DE CONTA CONTACTE"). So when I'm done, my entire invoice will be in Portuguese. This works fine, until I get special characters in some of the Portuguese translations. I can copy and paste the translations with special characters into Report Builder. But when I print the invoice in Oracle Apps (with a PDF output), the special characters get replaced with a "?".
    Here's an example:
    < "Line No" should read "Linha nº" but it prints out as "Linha n?" > Does anybother know how I can resolve this? I'm using Report Builder: 10.1.2.3.0 on Oracle Apps: 11.5.10.2 and RDBMS : 10.2.0.4.0
    Thank you in advance

    Hi,
    You need to have Portuguese font installed on your machine, if you are running the report from your machine or else if you are running the same from report server then the font has to be there on the server font dir.

  • How to use temporary interface in another interface as derived table in 10g

    Hi ,
    Can somebody please tell me how to use temporary interface in another interface as derived table in 10g.
    I have an option in odi 11g to this task.But i am working on odi 10g for my project.So that please help me to do this task.
    I can able to create temporary interface in 10g ,but i dont know how to use that temporary interface in another inerface as derived table.
    Thanks in Advance
    Thanks,
    Srikanth A

    A temp interface CANNOT be used as a derived table in ODI 10g.
    All you can do is to drag and drop the temp interface as the source in the mapping.
    PS. Please remember to assign correct/helpful points to the people who help you in the forum.

  • How to query a dataset using custom code in report builder 3.0

    Hi,
    Can anyone please suggest whether it is possible to query a dataset by using custom code in report builder 3.0.
    Thanks in advance.

    Hi Purbasha,
    please see below similar thread:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/9af8f39a-9dc5-49ab-91af-2f64198c8477/ssrs-2008-custom-code-for-database-query
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/440ff5de-1c21-47de-95d8-e4212d6cef6d/dataset-in-custom-code-in-sql-server-reporting-services?forum=sqlreportingservices
    swallow

  • How to Use a table UI for input ?

    Hi All ,
    I just want to ask how to use a Table UI in webdynpro ABAP to insert , change and delete rows ?? and can we give a drop down facility in table columns ? . This is really urgent .
    Thanks in advance.
    Regards,
    LAS

    Hi LAS,
    Everything is possible. I am providing the logic here which will help you a lot.
    For insert, Change, Delete: 
       Just get the all the elements into temp internal table and get the lead slected index. Now instrt one row in the lead selected index position. then again bind the temporary internal table to your table node. Thats all it works like inserting the row.
    In the same way you can do the change and delete rows also.
    For Dropdown:
      Here i am providing the code for Dropdown. It will help you out.
      Just create the Dropdown view for the columns for which you want dropdown. And do the coding for that.
      Here in my scenario IT is the Table node which holds the information. And i am providing the dorpdown key for the column "BSCHL".
      If you have any dobts just reply to me . i will respond it.
    Code:
      data : ls_outtab               type /kyk/s_fb01_line,
             lt_outtab               type table of /kyk/s_fb01_line,
             lv_node_sd              type ref to if_wd_context_node,
             lv_node_it              type ref to if_wd_context_node,
             lv_node_info            type ref to if_wd_context_node_info,
             lv_node_sapmf05a_0106   type ref to if_wd_context_node,
             lv_node_waers           type ref to if_wd_context_node,
             lv_node_layout          type ref to if_wd_context_node,
             lv_rowcount             type i,
             lv_buzei                type i,
             lv_waers        type waers,
             lt_bschl_set    type wdy_key_value_table,
             bschl_key_item  type wdy_key_value.
    bind to context
      lv_node_sd      = wd_context->get_child_node( name = 'SD' ).
      lv_node_it      = lv_node_sd->get_child_node( name = 'IT' ).
      call method lv_node_it->bind_table
        EXPORTING
          new_items = lt_outtab.
    fill Dropdown Help for posting Key
      bschl_key_item-key    = '40'.
      bschl_key_item-value  = cl_wd_utilities=>get_otr_text_by_alias( '/KYK/FIN_FI/DEBIT_GL_ACCOUNT' ).
      insert bschl_key_item into table lt_bschl_set.
      bschl_key_item-key    = '50'.
      bschl_key_item-value  = cl_wd_utilities=>get_otr_text_by_alias( '/KYK/FIN_FI/CREDIT_GL_ACCOUNT' ).
      insert bschl_key_item into table lt_bschl_set.
      bschl_key_item-key    = '21'.
      bschl_key_item-value  = cl_wd_utilities=>get_otr_text_by_alias( '/KYK/FIN_FI/DEBITVENDOR' ).
      insert bschl_key_item into table lt_bschl_set.
      bschl_key_item-key    = '31'.
      bschl_key_item-value  = cl_wd_utilities=>get_otr_text_by_alias( '/KYK/FIN_FI/CREDITVENDOR' ).
      insert bschl_key_item into table lt_bschl_set.
      lv_node_info = lv_node_it->get_node_info( ).
      lv_node_info->set_attribute_value_set( name = 'BSCHL' value_set = lt_bschl_set ).
    Warm Regards,
    Vijay

  • GRCT    HOW TO ADD Z TABLES IN REPORT PAINTER

    Hi Gurus
    Could you please send me information about how to activate z tables in report painter ?   someone said me that i can user transaction GRCT  to do that...¿ what aspects must I consider to add a table ?
    mail: [email protected]
    Regards
    Andrés Moreno

    hi Andres,
    below are the steps for the Report Painter.....
    Create a new report.
    Menu Path: Information Systems > Ad hoc reports > Report Painter > Report > Create
    On the Report Painter: Create Report screen, enter:
    Library – 1VK
    Report RSS-A
    Report Description – Report w/Total Row
    Hit <Create> button to move to the next screen.
    Create the Rows of the Report – The first four rows are cost element characteristics
    Screen: Report Painter: Create Report
    Type ‘Cost Elements’ in the lead column cell
    Double click on Row 1
    In the Pop-up window 'Element definition: Row1", enter:
    Note: If Pop-up window (select element type) appears, choose 'characteristics' and hit <Enter>.
    Select 'Cost Element' as the characteristic in the 'Available characteristics' section
    Hit <Move selected to left> button to move the characteristic 'Cost element' to the 'Selected characteristics' section
    From – 430000
    Hit <Change short, middle and long texts> icon (at the bottom of the window)
    In the Pop-up for Enter Texts, Enter:
    Short – Description from Table above for this Account
    Click on the <Copy short text> button to copy this description to the other fields.
    Hit <Confirm> to close the Pop-up
    Hit <Confirm/Enter> to check consistency and close.
    Repeat the above steps for the other 3 accounts
    Create a formula row to calculate the total of the Cost Element rows
    Screen: Report Painter: Create Report
    Double click on Row 5 or the next empty row.
    In the Pop-up for Select Element Type select 'Formula'
    Hit <Enter> to close the Pop-up
    In the Pop-up 'Enter Formula'
    Use the calculator buttons to create the formula Y001 + Y002 + Y003 + Y004
    Hit <Enter> to close the Pop-up
    In the Pop-up 'Enter Texts'
    Short – Total
    Click on the <Copy short text> button to copy this description to the other fields.
    Hit <Enter> to close the Pop-up
    Make sure your cursor is in the cell containing the word ‘Total’
    Follow the Menu Path: Formatting > Row
    In the Pop-up 'Row Formatting'
    Overscore – checked
    Underscore – checked
    Hit <Enter> to close the Pop-up
    Create the first column for actual costs
    Screen: Report Painter: Create Report
    Double click on the ‘Column 1’ cell.
    In the Pop-up 'Select element type'
    Select Predefined Key Figure radio button, and press <Enter>.
    In Pop-up 'Choose predefined column'
    Select Actual Costs as the predefined column, and press <Enter>.
    In the Pop-up 'Element definition: Actual costs'
    Press <Confirm> to check consistency and close.
    Define the second column for plan costs
    Screen: Report Painter: Create Report
    Double click on the ‘Column 2’ cell.
    In the Pop-up 'Select element type'
    Select Key Figure with Characteristics as the element type, and press <Enter>.
    In the Pop-up 'Element definition: Column 2'
    Value Type – 01   (Plan)
    Version – 0   (Actuals)
    Valuation – 0   (Legal valuation)
    Hit <Change short, middle and long texts> icon
    In the Pop-up for Enter Texts, Enter:
    Short – Plan
    Click on the <Copy short text> button to copy this description to the other fields.
    Hit <Confirm> to close Pop-up.
    Hit <Confirm> to check consistency and close.
    Create a formula column to calculate the variance between actual and plan costs
    Screen: Report Painter: Create Report
    Double click on the ‘Column 3’ cell
    Assign the points....
    Ranjit

  • How to import java Classes in report Builder 10g

    How to import java Classes in report Builder 10g .....
    Arshad

    Hello,
    To import the Java classes:
    Add your jar in the REPORTS_CLASSPATH
    Launch Reports Builder.
    Note:
    You must launch Reports Builder now so that the new REPORTS_CLASSPATH is used.
    Choose Program > Import Java Classes to display the Import Java Classes dialog box.
    Regards

  • How to use dual table in ODI in source side for nested queries?

    Hi,
    Any idea how to use dual table in source for more than once. I want to build a ODI interface for the following source query
    SELECT ACTV_TYP.ACTV_TYP_SRC_CD, ACTV_TYP.ACTV_TYP, PORT_ACTV_TYP.PORT_ACTV_TYP_SRC_CD, PORT_ACTV_TYP.PORT_ACTV_TYP, SFT_DLT_STS.SFT_DLT_STS_SRC_CD, SFT_DLT_STS.SFT_DLT_STS
    FROM
    SELECT LOW_VALUE PORT_ACTV_TYP_SRC_CD, MEANING PORT_ACTV_TYP
    FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
    WHERE TABLE_NAME = 'BRKR_PORTS'
    AND COLUMN_NAME = 'WORK_PORT_TYPE') PORT_ACTV_TYP,
    (SELECT LOW_VALUE SFT_DLT_STS_SRC_CD, MEANING SFT_DLT_STS
    FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
    WHERE TABLE_NAME = 'BANKS'
    AND COLUMN_NAME = 'REC_STATUS') SFT_DLT_STS,
    (SELECT 1 ACTV_TYP_SRC_CD, '?????' ACTV_TYP FROM DUAL
    UNION ALL
    SELECT 2 ACTV_TYP_SRC_CD, '???????' ACTV_TYP FROM DUAL) ACTV_TYP
    Regards

    If the below query is equivalent , it seems you don't need dual table at all , just default the values in the interface.
    You are using dual tables to populate values ACTV_TYP.ACTV_TYP_SRC_CD, ACTV_TYP.ACTV_TYP values. Look at your query in the following manner :
    SELECT '1', '?????', PORT_ACTV_TYP.PORT_ACTV_TYP_SRC_CD, PORT_ACTV_TYP.PORT_ACTV_TYP, SFT_DLT_STS.SFT_DLT_STS_SRC_CD, SFT_DLT_STS.SFT_DLT_STS
    FROM
    SELECT LOW_VALUE PORT_ACTV_TYP_SRC_CD, MEANING PORT_ACTV_TYP
    FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
    WHERE TABLE_NAME = 'BRKR_PORTS'
    AND COLUMN_NAME = 'WORK_PORT_TYPE') PORT_ACTV_TYP,
    (SELECT LOW_VALUE SFT_DLT_STS_SRC_CD, MEANING SFT_DLT_STS
    FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
    WHERE TABLE_NAME = 'BANKS'
    AND COLUMN_NAME = 'REC_STATUS') SFT_DLT_STS
    UNION
    SELECT 2 , '??????', PORT_ACTV_TYP.PORT_ACTV_TYP_SRC_CD, PORT_ACTV_TYP.PORT_ACTV_TYP, SFT_DLT_STS.SFT_DLT_STS_SRC_CD, SFT_DLT_STS.SFT_DLT_STS
    FROM
    SELECT LOW_VALUE PORT_ACTV_TYP_SRC_CD, MEANING PORT_ACTV_TYP
    FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
    WHERE TABLE_NAME = 'BRKR_PORTS'
    AND COLUMN_NAME = 'WORK_PORT_TYPE') PORT_ACTV_TYP,
    (SELECT LOW_VALUE SFT_DLT_STS_SRC_CD, MEANING SFT_DLT_STS
    FROM CUSTOMS.DOMAIN_ALLOW_COLUMNS_VALUES
    WHERE TABLE_NAME = 'BANKS'
    AND COLUMN_NAME = 'REC_STATUS') SFT_DLT_STS
    Now you can use dataset to make UNION.

  • How to use XREF table in BPEL?

    Can anyone tell me how to use XREF table in BPEL ??

    It is used to build up an XML fragment to the element on the target side...
    please refer this link....
    http://kr.forums.oracle.com/forums/thread.jspa?threadID=2252997&tstart=2
    Thanks,
    N

  • How to use the table maintenance events for validating the input entries..?

    Hi,
    I have created a Z table with 6 fields in which all are KEY fields. All are of CHAR type. I have created the Table Maintenance Generator for the same. While maintaining the entries in the table, even though I maintain a blank entry for a field it is saving the entry. But, I don't want that way. All the fields are mandatory in my table. One should enter all the fields. Otherwise it should not allow to save the entry. So, I think it can be done using the Table Maintenance Events. can someone tell me how to use the Table Maintenance Events. and which event to use for my reuqirement and what is the logic to be written.
    Or Is there any other way to solve my problem.
    Please share your inputs. Thanks in advance.
    Best regards,
    paddu.

    In the table maintenance generator, Environment --> Modifications --> Events then a screen will be appear here,we need to create the Events.In the EVENTS screen, press new Entries, there give 01(Before Saving the Data in the Database) and give a name(This will become a PERFORM), then click the Editor pushbutton, this will be there at the right side of the entry, then a popup will be appear, you can create an include program, there inside of the include program write ur code.
    Here is documentation for Event 01(Before Saving the Data in the Database )
    Event 01: Before Saving the Data in the Database
    Use
    This event occurs before new, changed or deleted entries are written to the database. Other activities can be performed, for example:
    hidden entry processing
    fill hidden fields
    flag data to be written to hidden tables after the database change.
    To have the changes saved by the central maintenance dialog routines, SY-SUBRC must be set to 0 at the end of the routine.
    Realization
    This event has no standard routine. The following global data is available for the realization of the user routine:
    internal table TOTAL
    field symbols
    field symbols <ACTION> and <ACTION_TEXT>
    <STATUS>-UPD_FLAG
    If internal table data are to be changed before saving, t he changes should be made in both the internal table TOTAL and in the internal table EXTRACT.
    FORM abc.
    DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
    LOOP AT TOTAL.
    IF <ACTION> = desired constant.
    READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
    IF SY-SUBRC EQ 0.
    F_INDEX = SY-TABIX.
    ELSE.
    CLEAR F_INDX.
    ENDIF.
    (make desired changes to the line TOTAL)
    MODIFY TOTAL.
    CHECK F_INDX GT 0.
    EXTRACT = TOTAL.
    MODIFY EXTRACT INDEX F_INDX.
    ENDIF.
    ENDLOOP.
    SY-SUBRC = 0.
    ENDFORM.
    Regards,
    Joy.

  • How to use multiple table in single control file?

    Hi,
    How to use multiple table and data file in sigle control file? I have a four table and four csv file i mean data file for that. I am running concurrent program to load the data from csv file to custom table. based on my input data file name, it has to take automatically from one control file.
    Can anyone share with me how can i acheive this?
    Thanks

    Hi,
    Can't we acehive like below. I don't this exactly corrcect.
    OPTIONS (SKIP=1)
    LOAD DATA
    INFILE << file name 1 >>
    APPEND INTO TABLE XXCZ_VA_SAMPLE1
    FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
         PARENT_ITEM               "TRIM(BOTH FROM :PARENT_ITEM)"
    LOAD DATA
    INFILE << file name 2 >>
    APPEND INTO TABLE XXCZ_VA_SAMPLE2
    FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
         ITEM_NUMBER               "TRIM(BOTH FROM :ITEM_NUMBER)"
    )Edited by: orasuriya on Sep 14, 2009 3:03 AM

  • How to use error table in mapping level?

    Hi all
    Any one please tell me how to use error table in mapping level or how to handle the errors in mapping.
    I am creating one error table in oracle but i dont know how to use it in mapping.
    Thanks in advance.
    Kumar

    Hi Kumar,
    You need to use Error Table along with the Data Rule .
    Error tables are used with Logical error handlers (Data Rules). Detailed description on using data rules is explained in the following document
    http://www.oracle.com/technology/products/warehouse/pdf/OWB10gR2_ETLandBusinessRules.pdf
    In a nut shell usage of error tables is as follows.
    1. Create a data rule associate it with a table (Target table or table in which you load data).
    2. Use the table in a mapping as target table.
    3. Deploy the table and mapping.
    Now in the target schema one more table will be created with the name <target table name>_ERR. When a mapping is executed the data which violates the data rule gets into this error table.
    The following has to be done to have error table name of customers choice.
    1. Right click on the table and click configure.
    2. Give the table name in "shadow table name" section.
    3. Deploy the table.
    4. Use this table in a mapping. Now in the mapping on this table properties in "Error Table Name" section the name of the table specified in "shadow table name" will be populated.
    Thanks,
    Sutirtha

  • Using temporary tables in stored procedures

    Suppose that I have created a temporary table in a stored procedure using an "EXECUTE IMMEDIATE" statement. When I compile the procedure, that table is not created yet, so the compiler says that the table does not exist.
    What is the way of using temporary tables in stored procedures?

    It's a good practice to avoid using DDL statements being executed from stored procedures. "Truncate Table" via dynamic SQL from stored procedure is a different story and is useful in DSS environments.
    But if you insist on "creating" tables using Dynamic SQL from Stored Procedures then you must also embed your DML statements in Dynamic SQL to avoid compilation errors.
    Example:
    Create or Replace Procedure Proc_TestDynamicSQL is
    Begin
    Execute Immediate 'Create table myTable as select * from user_tables' ;
    Execute Immediate 'Update myTable set table_name = ''Test'' ' ; --two single quotes before and after the string "Test"
    End;
    In this case, Oracle wouldn't care about the table references during compilation.

  • How to use temporary database?

    hi
    i am using timesten as cachedb for oracle database。i have some problem about how to use temporary database？
    1） what's the difference between temporary and non-temporary database，if i use awt cache group,then timesten will automatically replicate all change to oracle database , even if timesten crashed，i can set up another timesten quickly，no data loss？
    2）since all data is in oracle database，does timesten‘s transaction log and checkpoint file useful ? does timesten need backup ?

    Temporary databases have very limited usefullness; you can't use them with replication or caching for example. They are a very 'niche' use case; I'd recommend that you avoid them for mainstream use.
    TimesTen checkpoiint and transaction log files are always required (except for Temporary database which do not have checkpoint files but do have log files).
    Chris

Maybe you are looking for