How to use the 3D Fog Effect

...Hello again! It seemed easy, but In a composition with a Camera I have tried to apply the "3D Fog" * effect in several ways, that is, in Adjustment Layers in different timeline positions and depth, in each 3D layer separated in Z depth it selfs, and all that playing with all the parameters too getting no results and any change over that layers, so... or I'm missundertanding something or maybe this kind of effects requires something more... Well, the case is I've been looking for info but the manual only explains the parameters and not how to apply it... I've searching into the forum and I've make some Google searchs with millions of results but no consistent solutions until now... any help?
* http://livedocs.adobe.com/en_US/AfterEffects/8.0/help.html?content=WS3878526689cb91655866 c1103a9d3c597-7bd4.html

Oh, I think I have found something ot there, sorry if I was a little impatient...
"3d fog only works with 2 different 3d image types and does not work with a AE 3d scene."
And one of that 3d images is "RPF" or something like that, a file that contains some 3D or depth info as far as I can imagine... So... really there is no effect like this to simulate fog quickly & easily into a simple 3D After Effects composition? Cause it'd be very usefull... of course I can imagine several ways to "fake" it, but a simple effect for each 3D layer it'd be great to avoid complications... Well, anyway any imput or advice it'll be very welcomed, CHEERS!

Similar Messages

  • How to use the set functions effectively in webi ,please let me know with detail

    how to use the set functions effectively in webi ,please let me know with detail

    Hi,
    we use use set functions on heirarchies with aggregate functions mostly .
    If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
    Member_set can include multiple sets separated by semicolons (;).
    The list of member sets must be enclosed in {}.
    If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
    Eg .
    1)     Ancestor
    =Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
    2)     IsLeaf
    =[Test Hierarchy].IsLeaf
    You can use this function when you want to show your Measure only at lower level .
    3)     .Depth
    =[Test Hierarchy].Depth
    This is also function used with hierarchy to find Level of Members .
    Follow this link for PDF reference .
    Page 147
    https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
    search on SCN this question was discussed before also one those links .
    http://scn.sap.com/thread/3183380
    Hope this will help you .

  • How to use the grow/shrink effect from the gallery

    I'm not interested in the entire gallery, however, the
    grow/shrink effect is very nice.
    I tried looking for it in dreamweaver....
    and then I tried grabbing gallery.js and spryeffects.js
    I get errors.....Has anyone extracted this particular
    behavior? There are a number of places it can be useful.
    Thanks,

    Oh, I think I have found something ot there, sorry if I was a little impatient...
    "3d fog only works with 2 different 3d image types and does not work with a AE 3d scene."
    And one of that 3d images is "RPF" or something like that, a file that contains some 3D or depth info as far as I can imagine... So... really there is no effect like this to simulate fog quickly & easily into a simple 3D After Effects composition? Cause it'd be very usefull... of course I can imagine several ways to "fake" it, but a simple effect for each 3D layer it'd be great to avoid complications... Well, anyway any imput or advice it'll be very welcomed, CHEERS!

  • How to use the stabilizer effect on Adobe premiere elements 11

    Can anyone show me how to use the video stabilizer effect on premiere elements 11 step by step ?
    Thank you !

    achiu8888
    I suspect that the principles would lend themselves to a step by step but how the effect works with your specific video will depend upon the degree of shakiness and other factors.
    1. Your video clip on the Timeline of a project with the project settings which match the properties of your source video (part of all works whether or not the Stabilizer is involved.
    2. Go to fx Effects Tab at the bottom of the Expert View, navigate to the Video Stabilizer and click on it to view its thumbnail. Drag the effect's thumbnail from there into the video clip on the Timeline.
    3 I ran into an online excerpt of the Video Stabilizer in Adobe's Classroom in a Book, you may want to follow the path from there.
    http://books.google.com/books?id=7zdjWNElM1IC&pg=PT252&lpg=PT252&dq=premiere+elements+stab ilizer&source=bl&ots=YM4HHrmZAl&sig=MpFt6GJn7IkgESWBZ6sC6wA7aEM&hl=en&sa=X&ei=ZZ2zUbbVI5W3 4APDq4D4DQ&sqi=2&ved=0CHoQ6AEwBw
    Also, you might want to put that information together with Adobe Effects Reference's description of the options iin the Applied Effects Palette/Stabilizer Panel.
    http://help.adobe.com/en_US/premiereelements/using/WS4B8135DA-083C-42eb-B09E-65070ECBC889. html#WSeffff8bffc802084cc1873012fdd6069b3-8000
    (Scroll down until you get to Video Stabilizer options description.)
    The above should supply with good starter information. If you need clarification on anything that I have written, please do not hesitate to ask.
    Thanks.
    ATR

  • How can i burn an event to a dvd using the shattered slideshow effect

    Does any one know how to burn an event using the slidshow shattered effect on to a dvd or how do you creat that shattered effect in IDVD?

    While in the slideshow mode use the Share ➙ iDVD menu option.
    OT

  • Any tutorials on how to use the daily build of the Flex SDK to create Flash Player 10 content?

    Is there a tutorial on Adobe on how to use the daily build of
    the Flex SDK to create Flash Player 10 content?

    The approach you take might depend on a few things, but it boils down to using mouse interactive coding to trigger whatever effect you eventually realize.  The code you use will depend on the version of Actionscript you plan to use.
    You could make this as a movieclip that is normally stopped at its first frame and when you mouseover or click the movieclip, it animates along its own timeline to its enlarged state.  If the thumbnail is very small and the larger version is substantially larger, and both need to be clear images, this might be the better approach.
    If this only involves enlarging something, you could also probably realize it just using Actionscript Tween coding rather than timeline animation.

  • Using the Ken Burns effect in I Photo 5

    The first time I worked on a slide show I was able to use the Ken Burns effect with no problems. Later on opening I Photo and clicking on slide show I no longer have the controls for the Ken Burns effect. There is just a blank space where they should be. Why did this happen ? How do I get the controls back?
    Any suggestions would be appreciated. Thanks, Vernon

    Vernon:
    Welcome to the Apple Discussions. What may have happened is that one or more items within the iPhoto application package have had their permissions changed so you do not have access. Run Disk Utility and repair disk permissions. If that doesn't help try moving the application to the desktop and making a duplicate of it-select it and type Command-D. Now move the duplicated to the applications folder and rename to just iPhoto. Now see if the KB controls come back.
    Next would be a reinstallation of iPhoto. You'll have to delete the current application and all files with "iPhoto" in the file name that reside in the HD/Library/Receipts folder. Now reinstall iPhoto 5 and immediately update to the latest version. Then repair disk permissions.
    Hope this has been of some help. Good luck.
    OT

  • I have an older version of imovie.  After I change the photos using the Ken Burns effect and save them, the next time I open the file and click 'show photo settings' to change the zoom, the picture appears black and I can't change the zoom?

    I have a five year old version of imovie that generally works fine.  However, when I add a photo using the 'Ken Burns' effect then save the movie, the next time I open the file and click 'show photo settings' the picture appears black and I cannot change the zoom.  Any suggestions?

    Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
    Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
    See here:
    Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
    Let us know how that works for you.

  • How do use the hum remover in final cut pro 5? Help

    How do use the hum remover in final cut pro 5? Help!!

    Simply drop the effect onto the appropriate audio track. Set the frequency for the hum frequency (50Hz or 60Hz depending on your power supply). Include whichever harmonics you think might be present eg. 100, 150, 200Hz.
    Note that I have generally had more success by using Soundtrack Pro's noise removal tool.
    Trevor

  • How to use the Observer when a page loads

    Anybody know how to use the
    Spry.Utils.addClassName('DivName','selected') and then fire the
    Spry.Utils.addClassName with onLoad?
    I am loading a page with the selector utils in it into a div
    and then I think I must need an Observer to get the
    Spry.Utils.addClassName to work when this page loads in a div.
    Any help would be greatly appreciated.
    Thank you,
    Bisser.

    I added Spry.Utils.addClassName('DivName','selected') in the
    Script after the constructor and after the effects and it works
    fine. Thank you for your help to get me going.
    Well after the fact, this solution was a problem because it
    loads the selector each time I loaded the file.
    kinblas had the correct answer that I was looking for.... as
    it loads the selector as a 3rd argument.
    ie:
    Spry.Utils.updateContent('mainDIV','/menu.php', function() {
    Spry.Utils.addClassName('DivName','selected'); });
    Thanks to both of you for your continued support.
    Bisser.

  • SQL QUERRy (how to use the SQVI)

    Hi all,
    can anyone explain the process and how to use the Tcode SQVI.....
    thanks in advance
    srinivas...

    thanks for imm responce....
    as per ur mail ...
    If a report got created through SQVI Transaction it will not allows you to transport..
    the same senario will effect to the Tcodes SQ01,SQ02,SQ03.....
    could you please look into below my question also..can any one please responce to this,,,,
    The below link will explain to genereate the normal or ALV report using ABAP query without any programming language.i have few questions......
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40bec8da-4cd8-2910-27a9-81f5ce10676c
    1.here in this link pdf doc explained how to get the data in two tables usuing ABAP quesry,,,
    is it possible for getting the data from more than two tables and how ,canone please guide me....
    2.using ABAP query i got the ALV single grid report ,is it possible to get more than single grid usuingABAP query ....?
    3.using ABAP query i got the ALV single grid report then how to give the print and how copy and paste in the edit pad....
    note : the above PDF link step by step is helpfull for generating report using Tcodes like SQ01,SQ02,SQ03.
             can anyone provide the similar type pdf documents for generating report using Tcode SQVI...?
    thanks in advance
    Srinivas...........

  • Stills using the Ken Burns effects are bad quality

    The high quality still I'm inserting into the timeline using the Ken Burns effects are bad quality.  Do you know why?  I don't have that problem in iMovie.

    Yes, I have rendered it (I think).  Not sure how to do that and don't know how to get the "complete specs" of the still image and project.

  • Why do shadows appear before the letters when using the write-on effect

    I am using the write-on effect.  I am casting shadows on a wall but the shadows of the letters are appearing whole prior to the letters being written.  How can I get the shadows to appear in sync?

    I apologize for not supplying enough information.  I am using AE CS6 and I am using 3D layers with lights. I have also used a single layer for each letter in the message that is slowly appearing.  The lights are creating the shadows but are rendering the shadow before the effect write-on, as the shadow letter appears first.  Then the letter is drawn second.  I thought it must be something in the render order, but I couldn't figure out how to make it happen correctly.
    After I posted my question, I found an Adobe video tutorial on render-order.  Although the video didn't address my problem, it did remind me that an effect that I could use - drop shadows.  I inserted the drop shadow effect above the write-on effect on each letter and the world is good.  The shadow appears at the same time as the letter.  And with a whole lot less effort.
    I appreciate you taking the time to think about the problem.  If there is a simple solution I would still be interested in knowing what it might be.
    Steve

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

    Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

    It's not a good idea to use a network disk for both Time Machine backups and other things.  By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files.  I'd store those other files on an external disk connected to the Time Capsule.  The problem with that is that Time Machine will only back up files that are local to your Mac.  That means that you'll only have one copy of the files on or attached to your Time Capsule.
    By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

Maybe you are looking for