How to use the 4 level Categorisation Schema

Hi expert,
We assign the subject profile to the Schema for Multilevel Categorization in the service order.
But for the subject profile, there are only catlogs/code group/code three levels.
How to use more 3 three levels Multilevel Categorization ??
Could Schema be assign to service order directly?

hi,
follow following steps:
In SPRO
1. Customer Relationship Management >> Interaction Center WebClient >> Business Transactions >> Define Categorization Profiles
2. Assign this to the web-client profile in Categorization
3. Default Business transaction type: Make the transaction type you are using for service ticket/ service order default in Business Transaction profile
4. Customer Relationship Management >> CRM Cross-Application Components >> Multilevel Categorization >> Define Application Areas for Categorization >> check the basis of categorization. Select and go to Parameters. It should generally by the Subject Profile.
5. Customer Relationship Management >> Transactions >> Settings for Complaints >> Settings for Subjects >>
a.Define Catalogs
b.Define Code Groups and Codes for Catalogs
c.Define Code Group Profiles
d.Define Subject Profiles
e.Assign Subject Profiles to Transaction Types
In Easy Access
1. Create a short-cut for CRM BSP Application for CRMM_ERM_CAT. A new short-cut will be prepared in your favorites. This will launch the Category Modeler in a browser window. This needs Java.
2. Once launched Create a new Schema
3. Assign the schema to your categorization schema
4. In General Data tab provide the Subject Profile that has been created.
5. In Categories create the hierarchy as per your business logic and assign the specific code belonging to the code group profile in the subject profile
6. Once done, come to General Tab, add 10-15 minutes in the current system time and input this data in Valid from time. This is the time after which the Cat. Mod. Will be activated once released.
7. Change the status from Draft to Released. Depending upon u2018From Dateu2019 and u2018Valid From Timeu2019, the category modeler will be activated. This can be seen in the Service Order/ Service Ticket that you have specified, below the description.
Hope this helps.
Best regards
Pankaj Kumar

Similar Messages

How to use the TreeControl's active item indent level

I am trying to query the indent level of an item in a TreeControl when I double-click the item. I have an event structure that captures the double-click event. In the handler, I read the Active Item:Indent Level property but it returns an error:
Error 1135 occurred at Property Node (arg 1) in Viewer Main.vi
Possible reason(s):
LabVIEW: The tree control's active item is not valid for this property.
Property Name: Active Item:Indent Level
Does anyone have code to show how to access the indent level for the Active Item?
Thanks,
-cb

smercurio_fc,
I may not be using the control properties correctly. The help for Active Item:Indent Level indicates that it will return the Item Indent value for the active selected tree item. The indent level indicates the depth in the tree at which the item exists. For instance, a value of 2 indicates that the item is a Child of a Child of a Root node. When I try to access the property, I get an error. I have attached a simple VI (8.2.1) that shows the error and the basics of how I was trying to use it. Can you point out my error or provide a corrected VI?
Thank you,
-cb
Attachments:
Get tree control active item indent.vi ‏22 KB

How to use the validation work in Both TAB and Mouse keys in Forms6i

Hi,
I have a validation script once it's validated it should execute the query.But using When-Validate-Item i can't use execute_query.I am able to use the validation in Key-Next-Item trigger but if the user moves the cursor using mouse then it's not working.
How to use the validation script working in Both Scenarios(Tab and Mouse keys).
Can anyone please give inputs to rectify the above issue?.

So you have multiple fields, but on at least one of them if it's valid you immediately want to execute the query?
You could create a hidden field in a control block Query_Now default 'N'. In a WHEN-VALIDATE-ITEM on your item, if it's determined to be valid, then set Query_Now to 'Y'.
In a WHEN-NEW-ITEM-INSTANCE at block level, check if Query_Now is 'Y'. If it is then execute the query (and set it back to 'N').

HOW TO: Use the XML parser in Oracle 8.1.7

I am trying to figure out how to use the xml parser provided in oracle 8.1.7. all i want to do is parse a xml report that is defined using a schema, and place the data into the proper tables. i am totally unfamiliar with the xml parser and how it works. i have done some reading on the subject, but seem to be getting some conflicting infromation about which utilites i need and how to invoke them. can someone please tell me what utilities i need, how to invoke them, and what i need to do to get a xml document to parse and insert to a table? I would greatly appreciate any help anybody could offer. thanks.

You can parse the XML Document with XML Parser and place the data into database using XSU(XML SQL Utility).
Both of these are included in XDK for Java at:
http://otn.oracle.com/tech/xml/xdk_java
The following document could also help:
Oracle9i XML Developer's Guide--XDK [PDF] at http://otn.oracle.com/tech/xml/doc.html

How to use the set functions effectively in webi ,please let me know with detail

how to use the set functions effectively in webi ,please let me know with detail

Hi,
we use use set functions on heirarchies with aggregate functions mostly .
If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
Member_set can include multiple sets separated by semicolons (;).
The list of member sets must be enclosed in {}.
If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
Eg .
1)     Ancestor
=Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
2)     IsLeaf
=[Test Hierarchy].IsLeaf
You can use this function when you want to show your Measure only at lower level .
3)     .Depth
=[Test Hierarchy].Depth
This is also function used with hierarchy to find Level of Members .
Follow this link for PDF reference .
Page 147
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
search on SCN this question was discussed before also one those links .
http://scn.sap.com/thread/3183380
Hope this will help you .

How to change the source level in java Studio creator

Hi,
I am using Sun Java Studio Creator 2 Update 1 IDE, in this IDE how to change the source level to 1.5 for an existing project.
Thanks in advance,
Rajesh.

Hi!
Unfortunately Sun Java Studio Creator 2 Update 1 doesn't support 1.5 source level. But You can try to download NetBeans IDE (from http://www.netbeans.org) and there with Visual Web project You will find the same functionality as for Creator. And 1.5 source level is supported by NetBeans.
Thanks,
Roman.

How to do the Record Level commit in DB Adapter

Hi,
I am using Oracle JDeveloper 11.1.1.6.0 and SOA server 11.1.1.6
Problem Description_
I am fetching multiple records using File Adapter in BPEL process, After Fetching I am writing those records in Database using Database Adpter.
If any error records comes the database adpater rollback the complete transaction and none of the records is inserted into the Database.
**Can anyone please tell me how to do the record level commit in Database Adapter so that All the success records can be inserted into the database except the Failure record*.*
I dont want to call the Database adpater in loop multiple times to insert each record as it hampers the performance.
Thanks in Advance
Sunil

I believe you are polling a file and inside the BPEL, inserting the records into the database using the database adapter.
so according to your requirement you can do any one of the following things...
1. Instead of using the database adapter for inserting the record, you can call a Stored Procedure which it takes the record fields as input and it inserts the record into the table and does a commit at the end. when you follow this approach, make sure your data source is defined as Non-XA, otherwise you will face some errors.
2. If you are using the database adapter insert operation only, inside the BPEL, for the partnerlink of the database adapter, go to the properties and for the property "idempotent", give a value of false.
by doing this, what happens means, after calling the database adapter from BPEL through the invoke activity, the transaction is committed and from the next activity i mean after the invoke, a new transaction will be started but it will use the same thread though
3. If you are using the database adapter insert operation only, inside the BPEL, for the partnerlink of the database adapter, go to the properties and for the property "NonBlockingInvoke", give a value of true.
by doing this, what happens means, the database adapter insert operation will happen in a separate transaction and it will be committed, inside the BPEL after the invoke activity, a new thread and transaction will be started
4. Also, if you are using the database adapter insert operation, don't follow the steps as mentioned in either 2 or 3, you can simply put a dehydrate activity after the invoke activity.
According to your requirement, all the four approaches works. But my personal feeling, don't go for 4, instead 1 is better, 2 or 3 is also good.
Hope this helps,
N

What is the use for lock object and how to use the lock objects

Hi Guru's,
I am new to ABAP .Can you please clarify the that what is the use of lock object and how to use the loct object .what is use of the Deque & Enque function modules .

hi ,
below are some minfo about lock objects :
Lock Objects
These types of objects are used for locking the access to database records in table. This mechanism is used to enforce data integrity that is two users cannot update the same data at the same time. With lock objects you can lock table-field or whole table.
In a system where many users can access the same data, it becomes necessary to control the access to the data. In R/3 system this access control is built-in on database tables. Developers can also lock objects over table records.
To lock an object you need to call standard functions, which are automatically generated while defining the lock object in ABAP/4 dictionary. This locking system is independent of the locking mechanism used by the R/3 system. This mechanism also defines LUW i.e. Logical Unit of Work. Whenever an object is locked, either by in built locking mechanism or by function modules, it creates corresponding entry in global system table i.e. table is locked. The system automatically releases the lock at the end of transaction. The LUW starts when a lock entry is created in the system table and ends when the lock is released.
Creating Lock Objects
Lock object is an aggregated dictionary object and can be defined by using the following steps:
o From initial data dictionary screen, enter the name for the object, Click Lock object radiobutton and then click on Create. The system displays a dialog box for Maintain Lock Objects screen
o Enter short text as usual and the name for primary table.
-Save
-Select Tables option
From this screen you can:
Select secondary tables, if any, linked by foreign key relationship.
Fields for the lock objects. This option allows you to select fields for objects (R/3 system allows locking up to record level). Lock object argument are not selected by user but are imposed by the system and includes all the primary keys for the table.
1) Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
2) Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
3) Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
Also, last but not the least, locking the object is logical (locking with any enqueue ) .so, you have to use the lock object while trying to access from second program .
reward if helpful ,
Regards,
Ranjita

How do change the sound level input at the premiere cs6

Hello:
I would like to know how to change the sound level input al the premiere cs6?.
Sincerely, Gabriel Conde

The input sound levels will be determined by the media files you use. The output volume can be adjusted in several ways.
https://helpx.adobe.com/x-productkb/global/offline-help.html

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded to LION. And update the EFI, I would like to replace the Snow Leopard, EFI can not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

How to use the Report Generation Toolkit to get a list of bookmarks in a Word Template

I am working on a project where I will need to use the Report Generation Toolkit to fill out a fairly long Word Template. The MS Office Report Express VI can only have inputs for a maximum of 17 bookmarks which is not nearly enough for what I am needing to do.
I'm wondering if there is some way to use the lower level report generation VIs to read the word template and return a list of the bookmark names as a 1d array of string. The dialog box that you use to set up the Express VI has this capability but I'm not finding a way to scan the document programatically.
I'm sure I can't be the first person to run into this issue and I'm hoping that someone out there has found a good solution.
Solved!
Go to Solution.

Wordsub.llb should be somewhere in your Labview folder on your local drive. The path to it in my install is: C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\addons\_office\_wordsub.llb
Also what specific problem are you referring to about 17 bookmarks? Is that the limit on the express style VI for filling them in from LV? If so what you will need to do is to use the lower level function 'Word Insert Field' under Word Advanced VIs. You will need to supply the VI the name of the bookmark and the text you want to insert.

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How to use the t-code vf31 tor taking print out of invoice

Hi,
How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
venu

Hi,
Please find the steps
Output type                     RD00
Transmission medium             1
Sort order                      01
Processing mode                 1
Please give the oppropriate fields,
if the still error persists check the configuration in NACE transaction code.
thanks
Kuntla

How to use the 4 level Categorisation Schema

Similar Messages

Maybe you are looking for