How to use the ADS8320eb serial analog to digital converter

Has anybody a example of a circuit using this component?

Try this link to the datasheet. It should give you all the information you need to use this component including a schematic showing the hook-ups.
http://www.ortodoxism.ro/datasheets/BurrBrown/mXrxwzy.pdf
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

Similar Messages

Audio problems with Canopus analog to digital converter

I'm trying to digitize and import VHS tapes into iMovie 08. I'm using the Canopus 110 analog to digital device. I've connected the VHS player to the Canopus with RCA cables, as prescribed. The video has imported beautifully — but there's no sound, and so my then 2 year old daughter appears to sing, but alas, no voice — except, for the occasional clip (about 2 to 4 seconds of sound on a 30 minute tape). Any ideas? (I've spoken with an Apple tech who walked me through a test before assuring me the problem didn't seem to be with iMovie ['-).

Hi
a. You did install the Canopus programs (on CD) ?
b. I connect mine to a Standard VHS-VCR and use the SCART connector on it's back
and to this a RCA to SCART plug WITH AN IN AND OUT Switch !
On my VHS-VCR there are two SCARTs on it's back - only one of them works for this.
c. If You in iMovie pref - set Playback via Camera - picture will play but sound
will be directed to analog device = Your Canopus
and if You connect a TV to this or via the VCR (as I've done) the audio playbacks
nicely trough this.
Sorry this only goes for iMovie 1 to 6 - not for 08 or 09 (very bad)
Yours Bengt W

How Many Times Can I Use The Same Serial Number For Adobe Creative Suite 4?

I have design standard and was told I can use the same serial number on multiple computers. How many time can I use it? And say I install it on the maximum number of computers, but get a new computer, can I uninstall it on one of the old computers and use it on the new one? And can I use the programs on both computers simultaneously or do I have to use them one at a time?

Fred Tech wrote:
Broadly speaking, it depends on the type of license you have.
Specifically, if you have a single license then officially, you should only install it once on one computer.
Practically, (unless it has changed with CS4) you maybe able to install it on more then one computer, BUT can only run one instance of the software at a time. You can not run more then one instance of the software concurrently; i.e. you can't run Dreamweaver on Computer 1 and Photoshop on Computer 2. That would be two instances, and is not permitted.
This is my understanding. I am happy to be corrected if I am wrong
Fred
Sorry Fred you are wrong.
If you have a single license you can install it on as many computers as you like. you can only activate the suite on two computers at anyone time. Work and Home or as many of us do it Desktop and Laptop. You can not use the computers simultaneously. You only have 20 activation/deactivations so use them wisely. Student versions only have one activation. You can not break up the suite installs the suite is considered one application.

I want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

i want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

Oliver,
Are you getting activation errors? As Ned stated , it is easier to troubleshoot if we have the specific type of error and error detail that you are getting.
Here is some help on activation if this is the issue:
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Pattie

How to store the output of a analog to digital converter into an 2D array

Hi
I am doing my M.Tech Thesis in Image reconstruction and I am using labview for simulation and I want to know how to store the output of a analog to digital converter into an 2D labview array.

nitinkajay wrote:
I want to know how to store the output of a analog to digital converter into an 2D labview array.
How exactly are you performing 'Analog to Digital'???
Grabbing image using camera OR performing data acquisition using DAQ card OR some other way????
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

Can I use the same serial again?

I purchased Adobe Photoshop 12 and Premiere Elemets 12 as a packet. I installed them and etc but i also want to download them on my other computer. Do you know if i can use the same serial again? and how many times in total can i use it??

The number of times you can use the serial number is not really limited. It is the number of machines that you can have activated with it at any given time - two is the limit. You can reuse it as needed for new installations as long as you have an activation available. You can free up an activation to make it available for other use by deactivating an installation (opening a program and choosing Help -> Deactivate).

Can I use the same serial number for mac and pc?

My problem is that my mac is falling apart and I don't know how long it's still working - can be hours or can be months. I'm not sure if my next computer is mac or PC, so I'd like to know if the same serial number can be used with both mac and PC? I have understod that I can delete the program from my old computer and then use the same serial number in my next computer (Is it working that way?). So if I now buy a lisence for mac, can I use the same lisence later with PC?

Riisar for retail copies of the software you would need to complete the process detailed in Order an Adobe product platform swap or language swap.

How to get the iphone serial number in application?

hello, everyone
i really want to konw how to get the iphone serial number in aplication ? As it's different from uniqueIdentifier ....
thank you

Michele is correct - sneep will help you get the serial from the running domain on the M3000 ,
and it is a good idea to install STB on your machines.
If that isn't possible for you, then sneep can be downloaded directly from [http://www.sun.com/sneep]
I believe that on this platform, sneep gets the serial from the output of prtconf.
There is a minor correction to be made :
After installed SNEEP use "man sneep" for all technical details.The sneep man page is not linked into the shared man pages, so you need to use
man -M /opt/SUNWsneep/man sneep
with out going to OK prompt (Banner)It is worth noting that the serial shown in the OBP banner is not the product serial
that you will find on the physical serial tag.
The banner "serial" is the decimal equivalent of the host ID, which you normally get in hexadecimal from the "hostid" command.

I am unable to download LR5 onto my second computer using the same serial no.?

I am unable to download LR5 onto my second computer using the same serial no.?

Pgrossy since you posted in the Creative Cloud Download & Install forum does this mean that you are trying to install Photoshop Lightroom as part of a Creative Cloud Membership? If so then please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for information on how to install the Adobe Creative applications included with your membership.

Upon upgrading to CC from CS6 suite, use the same serial number?

Upon upgrading to this new Cloud, I was told I could continue to use my existing CS6 suite side by side with the new CC. But then I was told they use the same serial number, how is this possible?

Please ask the question in the Creative Suites (http://forums.adobe.com/community/creativesuites ) or Creative Cloud (http://forums.adobe.com/community/creative_cloud) forums.

I have bought lightroom 5 and loaded it onto my lap top but i want to buy a new lap top will i be able to load the same software onto my new laptop using the same serial number

Can I use the light room 5 software I have bought to install it on my new laptop using the same serial number as before

Yes, the Lightroom license key is single user/owner.
It can be installed on two computers at the same time with one in use at any point in time.
Mac & or PC.
There is no deactivate process just uninstall from one and install on another as many times that is necessary.
The link below gives a detailed procedural procedure.
http://www.lightroomqueen.com/how-move-lightroom-to-new-computer/

HT1689 can anyone simply tell me how to use the "find my ipod" feature through my itunes account that has the ipod registered?

Can anyone tell me how to use the "find my ipod" app that I have for my ipod? I have the ipod registered on my itunes account but I can get the serial # to send it in for apple support? How does this feature work? Thanks

Turn on your computer.
Open your Browser.
Go to icloud.com
Select find my iphone/ipod

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How to use the ADS8320eb serial analog to digital converter

Similar Messages

Maybe you are looking for