How to use the balance on my account to make a purchase

How do i use the balance on my itunes account to make a purchase? i'm trying to buy a book

you have a 13" MBP. Right?
If so then I don't think there is any way. The 13" MBP uses the same port for input and output but I don't think you can do both at the same time. It is either one or the other.
You could try an 1 to 2 adapter but most of those only split what is coming into them. I haven't taken the jack part on a 13" MBP to see if there is a extra connector to separate the input from the output and I doubt there is.

Similar Messages

  • How can I use the money in my account to make my purchase?

    Hi, I'm trying to use my $1.31 in my apple itunes account to purchase a song, but I'm prompted with an error message and taken to my payment information to fix my previous declined purchase. If the purchase was declined, why can't they just leave it at that and use the money that is already present in my account rather than prompting me to fix the problem?
    *The reason for it declining probably won't do answering my question any justice but I tried gifting some songs and I did gift them to multiple people (maybe 3-5) and I seemed to have no problem. Until I went to check the balance on my visa, it showed that Itunes didn't extract any of the money from my card. This was over a 24 hour period where my balance remained untouched. So I figured those gifts I "bought" weren't really purchased seeing as I already had the song in my account. Now, how is it my fault that I wanted to purchase things and the card was not declined for whenever I did so? It's not my fault iTunes never extracted or gave me a reason or time for the extraction of my credit card balance, it should have been instant.
    Sorry for getting off track, but anyways how can I get rid of this message of "select payment information" etc., when I already have money on my account to begin with? This money has been on my account before this declined jazz happened.
    Thank you and I appreciate you if you help!

    Perhaps you should Contact the iTunes Store Customer Service:
    Apple - Support - iTunes Store - Contact Us

  • Redeemed an itunes card, when i go to purchase a song it keeps asking me for my credit card.  Do I need to have a credit card on my account before it will let me use the balance in my account?

    I have just redeemed an iTunes card and I show a balance beside my name in iTunes store.  When I click on the song it keeps asking me for my credit card instead of using the balance in my account. 

    Hi Joycekk,
    If you have a question about the billing process on the iTunes Store, you may find the following article helpful:
    iTunes Store: How iTunes Store purchases are billed
    http://support.apple.com/kb/HT5582
    Regards,
    - Brenden

  • HT5035 I can't seem to use the balance on my account in the itunes store without putting in the code of the original card.  This has never happened before and I don't have the original card.  Help please?

    I can't seem to use the balance left in my i-tunes account without re-entering the code from the original i-tunes gift card.  I no longer have the card.  How can I purchase music using the balance without the card?

    the code from the original i-tunes gift card is not required again once redeemed.
    Riki from bc wrote:
    I can't seem to use the balance left in my i-tunes account
    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I have $8.05 balance on my gift card. I tried to buy an app more expensive than that so i had to add my credit card to the apple account. But I couldn't use the balance from the gift card anymore. How can I select to use it? or did I lose it?

    I  have $8.05 balance on my gift card. I tried to buy an app more expensive than that so i had to add my credit card to the apple account. But I couldn't use the balance from the gift card anymore. How can I select to use it? or did I lose it?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    The MAS should use any credits first and then apply the remainder to a listed bank card.

  • Purchased Itunes card..Have balance on my itunes account but trying to use the balance for an APP game...how do i transfer the funds ?

    I had a itunes card purchased for me...I redeemed it on my iphone in the Itunes APP...shows it was redeemed succesfully.Want to use the balance for an APP game i have....SImpsons Tapped out...hoe do i transfer it to it . it keeps using my credit card for purchasing premium items...how do i fix this to the itunes balance...thanks

    So then put any sim card in and restore it.  this isn't rocket science

  • HT1918 How do I change the region in my App store account if I have a minimal balance in credit that is insufficient to purchase anything? I keep on being told that I need to use the balance before I can change the region.

    How do I change the region in my account details if there is a credit balance that is insufficient to make a purchase.
    I keep being told that I cannot change the region while there is a credit balance.

    Click here and request assistance.
    (74813)

  • How to check the balance of the accounts in a specific dates

    Hi all
    I am using GL, AP and CE. My customer wants some reports or functionality in the system to check the balances of specific accounts in specific dates.
    So the user has to enter the beginning and the ending date for example:
    Beginning date: 13-JAN-2010
    Ending date: 21-FEB-2010
    Select some range of the accounts
    And he wants back this information: account number, account description, the beggining balance (the balance of each account chosen in 13-JAN-2010), ending balance(the balance of each account chosen in 21-FEB-2010)
    Please tell me where to find this information. Is there any standard report in the system.
    I checked Trial Balances reports, but they all do not give you the possibility to choose some range of accounts and they do not give you the possibility to choose specific dates.
    Almost the same comments for Account Analysis reports: they do not show balances, but movement for accounts.
    Almost the same comments for General Ledger reports: they do not allow you to choose specific dates.
    Please tell me how can i find this, because my customer is complaining that the old system did this and he really wants this information even in the new system which is Oracle Financial.
    Thank you and best regards
    Ernest

    Hello Ernest.
    You will need to know the FLEX_VALUE_SET_ID corresponding to your accounts 1110001 and 1110004. Also check if these values belong to segment2 of the Chart of Accounts. If not, you will need to change it in the query.
    For the Beggining balance:
    SELECT cc.segment2 "Account",
    f.description "Description",
    nvl(sum(l1.accounted_dr),0) - nvl(sum(l1.accounted_cr),0) "Beg Balance"
    FROM gl_code_combinations cc,
    fnd_flex_values_vl f,
    gl_je_lines l1
    WHERE cc.code_combination_id = l1.code_combination_id
    AND cc.segment2 between '1110001' and '1110004'
    AND cc.segment2 = f.flex_value
    AND l1.effective_date <= '13-jan-10'
    AND f.flex_value_set_id = <value you will need to find>
    AND l1.set_of_books_id = <your set of books id>
    GROUP BY cc.segment2, f.description
    For the ending balance:
    SELECT cc.segment2 "Account",
    f.description "Description",
    nvl(sum(l1.accounted_dr),0) - nvl(sum(l1.accounted_cr),0) "End Balance"
    FROM gl_code_combinations cc,
    fnd_flex_values_vl f,
    gl_je_lines l1
    WHERE cc.code_combination_id = l1.code_combination_id
    AND cc.segment2 between '1110001' and '1110004'
    AND cc.segment2 = f.flex_value
    AND l1.effective_date <= '21-feb-10'
    AND f.flex_value_set_id = <value you will need to find>
    AND l1.set_of_books_id = <your set of books id>
    GROUP BY cc.segment2, f.description
    Let me know if it worked.
    Octavio

  • HT5538 How do you separate multiple iOS devices using the same apple id account for Face Time calls and iMessaging?

    How do you separate multiiple ios devices using the same apple id account for Face Time calls and iMessaging?

    The only way I have seen is to have each device use a if fervent email account, if they all are on the same email the FaceTime connection is either to a phone number or to an email address.  If they ar all on the same email, it is up to the user to decide which to use.

  • I have an iphone 4. I disconnected it from my iTunes account but I am still using the iphone and the Apple ID. If I make a purchase will it work? Also, how can I reconnect my iphone to my Apple ID?

    I have an iphone 4.
    I disconnected it from my iTunes account but I am still using the iphone and the Apple ID.
    If I make a purchase will it work?
    Also, how can I reconnect my iphone to my Apple ID?

    Do you mean that you removed the phone from the 'manage devices' section of your iTunes account ? If you do then that won't stop you being able to purchase items on your phone - you only need to be logged into an account to be able to purchase with it.
    If you do mean the 'manage devices' section then you can associate, or re-associate, a device (or computer) by using iTunes Match, or automatic downloads, or redownloading past purchases on it : http://support.apple.com/kb/HT4627

  • How do I tell iTunes to use the balance in a gift card to purchase music instead of charging my credit card?

    I'm trying to use the balance from a gift card to buy music for my iTouch, but the system keeps trying to charge my credit card.   How do I use my balance???

    http://support.apple.com/kb/HT1364
    http://support.apple.com/kb/HT1203
    http://docs.info.apple.com/article.html?path=iTunesWin/9.0/en/27554.html
    This is the best guide:
    http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive

  • How to use the admin user account in reports and dashboards?

    Hi Everyone,
    I want to use the admin user account in report and dashboard connections. But the Hyperion is automatically using the current user's credentials to fetch data.
    Hyperion 11.1.1.1
    Thanks
    Syantan

    This has been posted in the essbase forum > How to use the admin user account in reports and dashboards?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to change the BP-customer Control Account for entering Opening Balance

    Hi experts,
    I am working on a project where I have used the segmented chart of account and segment is branch.
    Project is under SAP B1 8.8 PL 05.
    Customer has 2 branches. Now both the branch have different control account for debtors. Customer (BP) master is common for both the branches.
    Now at the time of entering BP-Customer opening balance, I do not find the provison to select/change of control account. So all the opening balance entered will go into one control account only, which is set in business partner master for particular customer.
    In SAP B1 8.8 at transaction level like Sales Invoice, there is provision to select the control account. Now I believe entering opening balance is the similar functionality as Sales Invoice and there should be provison for selection of control account to user.
    Anyboady has any Idea / work around ?
    Incase there is no provison then, I believe Product development team should take this in development of SAP B1 8.8.
    BR
    Samir Gandhi

    Hi,
    I suggest you to import BP opening balance by JE template of DWT in which you just put account code as your control segmented account and additional information in "shortname" field with customer/vendor code.
    Hope this helps,
    Son.

  • How to use the apple store? is there any google account needed? cause in my phone gmail requires.. help please

    how to use the apple store? is there any google account needed? cause in my phone gmail requires.. help please

    raynee88 wrote:
    how to use the apple store?
    What is an Apple ID?
    How do I get an Apple ID?
    From here  >  http://support.apple.com/kb/HT5622

  • HT1689 can anyone simply tell me how to use the "find my ipod" feature through my itunes account that has the ipod registered?

    Can anyone tell me how to use the "find my ipod" app that I have for my ipod?  I have the ipod registered on my itunes account but I can get the serial # to send it in for apple support?  How does this feature work?  Thanks

    Turn on your computer.
    Open your Browser.
    Go to icloud.com
    Select find my iphone/ipod

Maybe you are looking for

  • Error while creating a hyperlink for a field in a table view

    Hi all, I have created a table view to display the lead information.Now i wanted to make the lead number to be made as a hyperlink.I have tried the delow code <htmlb:tableView id = "tvX" headerText = "Leads Details" headerVisible = "true" design = "a

  • Connecting Both Mac Mini and MacBook Pro to single LED display

    Is it possible to dock two mac computers to the same monitor, and have the ability to switch between each computer on the fly? I am trying to dock both a MacBook Pro and a Mac Mini to the same 24" Apple LED display. I would like it to be as close to

  • Choosing artists within a playlist.

    greetings, Is there any way to choose a playlist, and then be able to choose an artist within that playlist, and then choose the song? I have a 60 gig ipod, and my playlists are unruly. I made smart playlists titled A-C, D-F, etc... so I could get to

  • Azure VM in unknown state

    We have had VMs in unresponsive state with RDP unavailable. Stop-AzureVM is only working with -Force, but restart is still not working, the message from Az is "could not start". The solution so far has been to resize the server and then a restart is

  • How to deal with hum/interference - 30in Cinema display?

    Hi, I hope someone can help with this! I have a 30inch Cinema display, which has started to create a hum through my powered speakers (Genelec 8040's). I have tried plugging the (mains powered) speakers into a separate mains socket, moving them about,