How to use the BIEE function to analysis the data. such as regression

i want to know some details information about the function of oracle BIEE . and i need a regression analysis or any other logistic methods in my data.how to solve it thank you!

i can't found the website?
it say:
Page not found
Sorry, the page you were looking for in the blog kpi partners does not exist.

Similar Messages

Webi - How to use group by function and to make data distinct in that column

Hi Everyone
I'm a begginer in BO and i'm experiencing problems when trying to create a webi report that shows different courses, how many males and females in a course, their race and how many people attended each course. My challenge comes in wen i try to group by distinct courses:
For Example
Course name     Gender     Race         Attendees
BEXX11             Female     Coloured    2
BEXX11             Male         African      1
C3                    Male         Indian        2
F3                    Female      White       1
BEXX11            Female      Indian        3
C3                   Female      Indian        4
Course name     Gender     Race         Attendees
BEXX11            Female     Coloured    2
                        Male         African       1
                        Female      Indian        3
C3                    Male         Indian         2
                        Female     Indian         4
F3                    Female      White       1
Thanks in advance

Hi Olebogeng Marumo,
Apply the break on Course Name and then check the output.It will fulfill your requirement.
Web Intelligence 4.0: Create breaks between groups of data
Regards,
Anish

How to use case when function to calculate time ?

Dear All,
May i know how to use case when function to calculate the time ?
for the example , if the First_EP_scan_time is 12.30, then must minus 30 min.
CASE WHEN FIRSTSCAN.EP_SHIFT <> 'R1' AND FIRSTSCAN.EP_SHIFT <> 'R2'
THEN ROUND(CAST((DATEDIFF(MINUTE,CAST(STUFF(STUFF((CASE WHEN SHIFTCAL.EP_SHIFT = 'N1'
THEN CONVERT(VARCHAR(8),DATEADD(DAY,+1,LEFT(FIRSTSCAN.EP_SCAN_DATE ,8)),112) + ' ' + REPLACE(CONVERT(VARCHAR(8),DATEADD(HOUR,+0,SHIFTDESC.EP_SHIFT_TIMETO + ':00'),108),':','')
ELSE LEFT(FIRSTSCAN.EP_SCAN_DATE ,8) + ' ' + REPLACE(CONVERT(VARCHAR(8),DATEADD(HOUR,+0,SHIFTDESC.EP_SHIFT_TIMETO + ':00'),108),':','') END),12,0,':'),15,0,':') AS DATETIME),CAST(STUFF(STUFF(LASTSCAN.EP_SCAN_DATE,12,0,':'),15,0,':') AS DATETIME)) / 60.0 - 0.25) AS FLOAT),2)
ELSE ROUND(CAST((DATEDIFF(MINUTE,CAST(STUFF(STUFF(FIRSTSCAN.EP_SCAN_DATE,12,0,':'),15,0,':') AS DATETIME),CAST(STUFF(STUFF(LASTSCAN.EP_SCAN_DATE,12,0,':'),15,0,':') AS DATETIME)) / 60.0) AS FLOAT),2) END AS OTWORK_HOUR

Do not use computations in a declarative language. This is SQL and not COBOL.
Use a table of time slots set to one more decimal second of precision than your data. You can now use temporal math to add it to a DATE to TIME(1) get a full DATETIME2(0). Here is the basic skeleton.
CREATE TABLE Timeslots
(slot_start_time TIME(1) NOT NULL PRIMARY KEY,
slot_end_time TIME(1) NOT NULL,
CHECK (start_time < end_time));
INSERT INTO Timeslots --15 min intervals
VALUES ('00:00:00.0', '00:14:59.9'),
('00:15:00.0', '00:29:59.9'),
('00:30:00.0', '00:44:59.9'),
('00:45:00.0', '01:00:59.9'),
('23:45:00.0', '23:59:59.9');
Here is the basic query for rounding down to a time slot.
SELECT CAST (@in_timestamp AS DATE), T.start_time
FROM Timeslots AS T
WHERE CAST (@in_timestamp AS TIME)
BETWEEN T.slot_start_time
AND T.slot_end_time;
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

How to use report designer in bex analyser ,quary designer, wad give scree

how to use report designer in bex analyser ,quary designer, wad give screeeenshots detail

Hi,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
WAD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
http://help.sap.com/saphelp_nw04s/helpdata/en/a9/71563c3f65b318e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a9/71563c3f65b318e10000000a114084/frameset.htm
/people/prakash.darji/blog/2006/07/16/bim253-at-teched--query-report-and-web-application-design-with-the-sap-business-explorer-suite
http://help.sap.com/saphelp_sem40bw/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
GTR

How to connect our outbound function module to the message type

how to connect our outbound function module to the message type any transcation code exits to assign the message type with the function module .
Thank in advance .
A. Thiru

Hi Thiru,
Standard Transaction Codes, have their own Function Modules for generating Outbound/Indbound Idocs. Where these Function Modules will be configured to a particular Process Codes.
For E.g for PO's
Process code : ME10 - IDOC_OUTPUT_ORDERS - for creation
In case if its a Z Function Module, It depends on the case how you use IDOC types. either directly through Z Program or through Inbound/Outbound Process codes with respective Function modules.
Regards,
Anbalagan

How to create a custom function module with the records in SAP R/3?

Hi All,
How to create a custom function module with the records in SAP R/3? Using RFC Adapter I have to fetch the custom function module records.
Regards
Sara

Hi
goto se37...here u need to create a function group... then u need to create a function module. inside assign import/export parameters. assign tables/exceptions. activate the same. now write ur code within the function module
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
Look at the below SAP HELP links, These links will show you the way to create a Function Module
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in?

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in? This application must be in Lab View 8.

you mean something like this (see below)?
Now you may have to implement code to check if the destination folder exists and to create it, etc. But if you use the Front Panel Control to select the destination folder, it should be okay.
Not the best implementation, mind you but you'll get the idea..
Message Edited by JoeLabView on 04-18-2007 03:43 PM
Attachments:
copy folder contents.PNG ‏10 KB

How to use xsl document() function with LiveCycle XSLT processor

Hello,
I would like to use LiveCycle XSLT processor to merge xml documents by using the xsl document() function.
However, I have not, yet, found clear reference information on the specifics of how to accomplish in LC. For instance if you have
a transformation that does merging using a standalone xml editor (such as Oxygen), than what is required to accomplish the same
using the LiveCycle XSLT service. How do you specify the URI of the XML document that is specified as an input in the xsl document() function. Your insight is appreciated. Regards

Hello Steve,
I checked the reference that you cited (XSLT Transformation). The reference omits discussing how to use xlst document() function within a stylesheet. I think that probably means that feature of xslt technology is not directly available through LiveCycle. When I find a workaround, I'll post an update...for the user community that might encounter the same issue. Thank you for your response and insight. Regards, jb1809

How to use an infopath form field in the designer workflow

Hi,
I need to send an email to a person field from Infopath form. Can i access it in the workflow. If not, is there a way i can send an email on form submission from within the infopath form.
Please help. Thank you.

Hi Prajk,
There are three ways of achieving it, one i will say its pretty straightforward and covers the basic of Infopath Forms Development
1)Populate Fields From Infopath Form at the time of Publishing.
The moment you done with your form and to publish you click FIle>Publish>SharePoint Server >Enter the Url of Site> Then Click Next twice upto a point where wizard asks "The fields listed below will be available as SharePoint Columns" ,
Click Add, select the placeholder in myfields for Person Field , expand the "person" group field and choose "AccountId", give the name to column(this will be SharePoint List Column Name) and for function select "first" and then
click next and Finish.
And use this field in Designer Workflow to send email.
2)Second way is to write VSTA based C# code on click of your Submit action on the form and upload and activate this form on form library via Central Admin.
3)Now other way of doing this is via Event Recievers.
Every infopath Form is an XmL File so on ItemAdded event you can extract its content and implement email sending c# code there:-
http://www.bizsupportonline.net/infopath2007/how-to-use-sharepoint-event-handler-object-model-submit-data-infopath-form-sharepoint-list.htm
Mark as Answer if helped!! To be or Not to Be..The question is this only......

How to use sswa jsp function in personalization?

I have a question. When I add a custom item of type link in a region using personalization, how can i access the click of the link as an event in that region';s controller.
Also if I want to use the "destination function" field of the new Link created with an existing seeded SSWA JSP function, how do i pass url parameter values to this function.
The function name is IMC_NG_PER_SOURCE_VIEW and the HTML call is OA.jsp?page=/oracle/apps/imc/ocong/mosr/webui/ImcPerMosrViewPage&ImcPartyId={@ImcPartyId}&ImcPartyName={@ImcPartyName}&ImcMainPartyId={@ImcMainPartyId}
Now when I click the link on the Page the HTML call is made as is, i.e. the target Page ImcPerMosrViewPage gets the value for ImcPartyId = "{@ImcPartyId}" instead of the real Party ID.
Whereas on the same Page there is a side bar Menu, and one of the Menu item makes a call to the same sswa jsp function and when we click the menu item the target page is rendered successfully.
So my question is how do I make the link on the region to work the same way as the Menu item.
It would be great of you could share some tips to resolve this issue of mine.
Many Thanks!
Jay

Just set the fire Action property of that link and capture that in controller PFR.
Thanks
--Anil

How to use Round off function in TAX Formula

Dear All,
         I have to do Round off in the Tax Formula. Hence I was suggested by the SAP Forum Team to use Round off function in the Tax Formulae.
         But sir I don't know how to use Round off function in the Tax Formulae.
        For Eg. BaseAmt = Total
                    TaxAmt = BaseAmt * Rate
           Now within this Eg. How will i use the Round off function and where i will use it.
           Please guide me with example.
Regards
Hitesh Parsawala

Hi Hitesh,
you can do like this
Cess_ST_TaxAmt=Round(Cess_ST_BaseAmt*Cess_ST_Rate,0)
where you can introduce rounding function by choosing from dropdown available in Operation and by click on Insert.
It will post following in formulla window
Round (Number, Decimals as Number)
where in parameter you have to give 1.Number-which is to be round and 2.Decimals as Number-as per your requirement like by 2 decimal or 0 decimal
If required give me call,
BR
Samir Gandhi

How to use "Reference Structure" setting in analysis grid item

Hello expert,
in Bex analyzer, how to use "Reference Structure" setting in analysis grid item by example?
Many thanks,

The variable needs assigned a value, that's why you're getting prompted. When you execute the statement, it's not executing the variable and exec lines.
Having script output available in a grid would be an enhancement request.

How to use Spell-check functionality for textbox (like Orkut, gtalk)

How to use Spell-check functionality for tex Hello Friends,
I am working on a JSP application. I wanted to add Spell check for text box like we have here, when we post a message. It automatically shows red line under the word, when ever spelling is wrong. Please tell me how I can do this. If possible, the code too.
Thanks.

I believe the spell checking you see here, or on any other site, is the spell checking built into Firefox. At least that's what I see. Are you using Firefox?

How to use a C function as a native method

Could anybody tell me how to use a C function as a Java native method.
Thanks

Read all about it.
You'd probably have to write a little wrapper (using JNI) that passes
parameters and return values around between your C function and
the JVM.
kind regards,
Jos

How to use a partner function?

1. I would like to link a project (or WBS) to the Invoice Approver (for the workflow)
2. I would like to link a project to a Customer or several Customers
3. I would like to link a project to a Vendor or number of Vendors
Not clear how to use a partner function for that reason and where this will be visible.

Getting following error message for the Customer:
Customer for function Y2 may not have account group Z010
Message no. VP303
Why and where such restrictions are applied?

How to use the BIEE function to analysis the data. such as regression

Similar Messages

Maybe you are looking for