How to use the Cannon Vixia HF20 HD SD Media cam with OnLocation

Actually the convenient use of SD media for all shooting with the Cannon HF20 almost makes the need to use OnLocation a moot point. Nevertheless, since I do own the program, I would like to now if it can be done. The camera has Component ( red - green - blue ) Out, HDMI and USB. I've tried various combos but OnLocation still does not recognize the cam. Maybe this camera is not suitable for using withing OnLocation. Other than that, it is an outstanding HD camera shoooting at 1920x1280. Shooting at 24P and 1080I.

OK,
IS IT POSSIBLE for OnLocation to detect an RCA input?
I've got a Vixia HF S100, and it has the same outputs as listed in the earlier post.
I'm willing to purchase an RCA converter to take the signal off my camera and run it through OnLocation to use as a reference only.
I'll be capturing on the camera of course, but for some studio shooting, it is necessary to see your live image within OnLocation or other Adobe programs...
Thanks for any help!

Similar Messages

HOW DO use the Mikey 2.0 iPod and iPhone Microphone with my IPHONE4

HOW DO use the Mikey 2.0 iPod and iPhone Microphone with my IPHONE4

Did the microphone come with a user manual? You might contact support for the microphone.
Just so you know the iPhone 4 has a built-in microphone

I'm looking into how apps use the cloud. Would you consider any app with social media access as uploading information to the cloud? e.g. being able to tweet through an app is the same as uploading data to the cloud

I'm looking into how apps use the cloud. Would you consider any app with social media access as uploading information to the cloud? e.g. being able to tweet through an app is the same as uploading data to the cloud

Most of us in this forum are users who volunteer on technical issues, and not Adobe employees although they do drop in from time to time. As users we simply have no control over activation and that's why you are not getting responses.
If you havn't done so,you might try the Muse forums and see if you can get a staff member to look into it. Have your case numbers and phone transcripts handy.
Last option is to keep calling customer service until you get someone who will help or ask for a supervisor.
Hope this get resolved,
Gene

How to use the update mechanism in Photoshop CS10 for Camera Raw?

Good Evenning!
I would like to open .NEF files with Adobe Photoshop CS10 (RAW for Nikon D5200) but my version of Camera Raw is too old.
I need at least the 7.3 version.
When I try to download it, I have this message: Please use the update mechanism in Photoshop CS10 for Camera Raw. But how?? When I go to "Help" tab, to "Updates", it says that no update available.
Can please someone help me?
Thanks a lot!!
Kinds Regards
Vanessa

Which version of photoshop or photoshop elements are you using?
Which operating system?
There is no such version as cs10.
Do you mean photoshop shop elements 10?
If you go to Help>About Photoshop Elements (windows) or Photoshop Elements Editor>About Photoshop Elements (mac), that should tell you which version you have.

How to use the same apple id on two different iphones with different sync?

Hi all,
I own an iPhone 4s for personal use. Soon my company is going to give me a business phone and I can choose to have another iPhone. I'd love it but I don't know if what I wanna do is possible.
Let's say I will have iPhone P (personal) and iPhone B (business) and Apple ID MyID.
At the moment on iPhone P with account MyID I have application App1, App2, ... App9, I have contacts Cont1, Cont2, ...Cont9, I have songs Song1, Song2, ... Song9. All these are synced on my personal PC via iTunes and stored in the iCloud.
When I'll get iPhone B I'd love to be able to use on it my Apple ID MyID and to sync it with my business PC (so NOT the same one I use for iPhone P).
The configuration I'd love to have would be the following.
iPhone P
- Applications: App1, App2, App3, App8, App9
- Contacts: Cont1, Cont2, ... Cont9
- Songs: Song1, Song2, ... Song9
iPhone B
- Applications: App4, App5,App6, App7, App8, App9, App10 etc.
- Contacts: Cont1, Cont2, Cont10, Cont11, ..., Cont20
- Songs: Song1, Song2, Song10, Song11, ... Song20
So will it be possible using the same Apple ID MyID on both iPhones to have this configuration? Some apps, contacts and songs in common and some differents?
If so, how should I configure the two iPhones and the two PCs?
Kind regards.

If you use the same Apple ID for iCloud on each device, yes. However, you can use the same Apple ID for iTunes content on each device, but different Apple ID's for iCloud, iMessage, FaceTime, etc., on each device. That way, you can have whatever iTunes content you want on each phone, but keep all of the other data separate. You can create another Apple ID here:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId?loca lang=en_US
Must be a verified email address.

How to use the caseccading parameter in my ssrs report? with some scenioro?

Hi i have a complex report for that i am using the 3/4 parameters name list.
parm1:ProductId
parme2:manafacturer
pram3:productname
so here i will use these 3 paramters in my ssrs report .
so here i will create a casecading parameters using the above 3 parameters.
But here my requirement is..
1)for my user selcction select the paramater1 as ProductId based on the productID parameter the 2 nd 3 paramters
i want to display automatically without user selection
2),Here every productid have a single productName and single manfacturer
and here i dnt need the drop down list of 2 nd 3rd parameter for user selection. i need only the text boxes
4)am alredy tried for this but i will able to see only one value in the user selection of param1.but it would not change for the second selection
5)can you give me some idea hw would i show u 2nd and 3rd parameteer based on 1st paramter value without drop down list for my user seletion of my first parametr1
I guess u understand my requirement.
can you suggest me any help .....for the above requirement.
ThanX!

In your case you need to setup parameters like this
1. ProductId
Have a dataset which gives you list of productids. It should return atleast one field which would be the distinct productids from your table.
ie like
SELECT ProductID
FROM ProductTable
assuming ProductID is it Primary key
In report go to parameter properties for ProductId parameter
In Available Values tab choose the option Get values from query
Map the above dataset and choose value field name as ProductId and label also as the same
This will populate param 1 with values
2. Manufacturer
Have a dataset which gives you list of manufacturers. It should return atleast one field which would be the distinct manufacturer from your table.
ie like
SELECT Manufacturer
FROM ManufacturerTable m
WHERE EXISTS (SELECT 1
FROM ProductTable
WHERE ProductId = @ProductId
AND Manufacturer = m.Manufacturer
assuming Manufacturer field has unique values. map @ProductId query parameter to SSRS parameter ProductId you created above
In report go to parameter properties for Manufacturer parameter and map the parameter to dataset as per same sequence of steps before
3. Product
Have a dataset which gives you list of manufacturers. It should return atleast one field which would be the distinct manufacturer from your table.
ie like
SELECT ProductName
FROM ProductTable m
WHERE ProductId = @ProductId
assuming Manufacturer field has unique values. map @ProductId query parameter to SSRS parameter ProductId you created above
In report go to parameter properties for ProductName parameter and map the parameter to dataset as per same sequence of steps before
Now if you run the report the values for Manufacturer and ProductName keeps on changing based on value you chose for productid parameter
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How to use the multi-touch trackpad to adjust icon size?

After I upgrade my OS X 10.6 to 10.9.2, I lost.
Everyday I search the forum to look for the "feeling" of using Mac OS (migrate from windows to OS X10.6). The OS X 10.6 is just great.
Now the questions, how to use the multi-touch trackpad to adjust icon size with simple pinch open or close gesture?
Thank you.

Welcome to Apple Support Communities. We're users here and don't speak for "Apple Inc."
Using the multi-touch trackpad to 'zoom' in or out is temporary.
The best way to permanently change icon size on the Desktop is to Command+click on an empty place on the Desktop screen and select Icon Size from the Desktop preference pane:

HT3390 OS X 10.9.2 how to use the Multi-Touch trackpad to adjust icon sizes in the Finder like previous OS?

After I upgrade my OS X 10.6 to 10.9.2, I lost.
Everyday I search the forum to look for the "feeling" of using Mac OS (migrate from windows to OS X10.6). The OS X 10.6 is just great.
Now the questions, how to use the multi-touch trackpad to adjust icon size with simple pinch open or close gesture?
Thank you.

I might also add, you can run 10.6.8 Server in virtualization, if you need access to Rosetta applications:
https://discussions.apple.com/docs/DOC-2295#ROSETTALION

How to use the MAC Keyboard

Can anyone point me to a tutorial or posting which explains how to use the keyboard?
I have an iMac (sep2009) with a wired keyboard including numeric keypad and there are keys that I just do not know how to use
eg:
How do I put FUNC LOCK on so that when I using Excel the F2 key becomes EDIT CELL rather than adjusting the brightness
What do the keys below the F14 and F15 keys do? There is an angled arrow up and left and ne down and right. and there is an arrow up with two lines crossing it a,d another similar one down. What are we supposed to sue these for?
Under the F16 key there is a box with a cross through it. What does that do?
WHy are F5 and F6 blank?
What does the big key on the very right bottom do?
I would have thought that there would be a MAC101 guide to the keyboard but I cannot find it... Any help from out here?
Many thanks

jhrichmond wrote:
Can anyone point me to a tutorial or posting which explains how to use the keyboard?
I have an iMac (sep2009) with a wired keyboard including numeric keypad and there are keys that I just do not know how to use
eg:
How do I put FUNC LOCK on so that when I using Excel the F2 key becomes EDIT CELL rather than adjusting the brightness
System Preferences>Keyboard; Set it to use Function keys as F1, F2, etc.
What do the keys below the F14 and F15 keys do? There is an angled arrow up and left and ne down and right. and there is an arrow up with two lines crossing it a,d another similar one down. What are we supposed to sue these for?
I just loaded the UK Apple store and compared the keyboards to the ones at the US store. I guess since you are so "international" over there, you get pictures instead of words. My guess would be Home, End, Page Up and Page Down
Under the F16 key there is a box with a cross through it. What does that do?
Clear key for the numeric keypad.
WHy are F5 and F6 blank?
No additional functions assigned to them.
What does the big key on the very right bottom do?
Enter key for the numeric keypad.
I would have thought that there would be a MAC101 guide to the keyboard but I cannot find it... Any help from out here?
I think Apple thinks based on where you live, you understand pictures instead of words. Probably cheaper to make one keyboard than ones for each language.
Many thanks
Edit: Almost forgot. MAC is an acronym for Media Access Control. A Mac (short for Macintosh) is a personal computer made by Apple.
Message was edited by: Barney-15E

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How to use the t-code vf31 tor taking print out of invoice

Hi,
How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
venu

Hi,
Please find the steps
Output type                     RD00
Transmission medium             1
Sort order                      01
Processing mode                 1
Please give the oppropriate fields,
if the still error persists check the configuration in NACE transaction code.
thanks
Kuntla

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

How to use the same OC4j server with different port number

How to use the same OC4j server with different port numbers..?
I have to OC4J installed on my machine on different hard disk drives....
I want to be able to run both the server simultaneously..?
is it possible ..it yes then how..?
for that i have changed the port number of one server...
but when i am trying to start the other server with different port number..it says that JVM -Bind already...
Is there any clues...?
Nilesh G

In the config directory:
default-web-site.xml: Change the port the HTTP listener listens on
jms.xml: Change the port the JMS service listens on
rmi.xml: Change the port the ORMI listener listens on.
Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
Rob
Oracle

How to use the Cannon Vixia HF20 HD SD Media cam with OnLocation

Similar Messages

Maybe you are looking for