How to use the cgicmd.dat to specify a directory name for desname

Hi folks,
What I'm trying to do is use a command key to specify the directory for a file, specified via desname. Here's an example.
cgicmd.dat
custom_reports_dir: /some/directory/custom_reports
Then I want to reference it via something like this..
http://server:7777/reports/rwservlet?cmdkey=rpt_connect&destype=file&desname=custom_reports_dir/test.pdf&desformat=pdf
Where in the above example, I'm trying to use the command key to specify a directory name, and then append a file name to it. It isn't working for me, is this possible to do? I figure since it's not an argument in itsself, it's being interpreted literally, rather than being substituted for the parameter.
Thanks very much,
-Adam vonNieda

That depends on how you actually run your program in the first place. If you just use a batch file you could simply make the path to the javaw.exe relative (e.g. jre\javaw.exe �cp lib\myJar.jar com.MyClass). Or you could look into some third-party software that allows you to create installations packages for Java. I have used Zero G's InstallAnywhere before and they have support for you setting up their executables to use a bundled jre. I am sure all the other java install makers have similar functionality.
Lance

Similar Messages

Using the cgicmd.dat file

In using the 9i report (pdf) format as a portlet
for portal we are required to supply the OID resource
under the ssoconn parameter . Since the numbers of users
are high and there seems to be no way other assigning programatically the resources ..
am wondering if i could use the cgicmd.dat file
i have seen examples for thing for jsp's but i dint see one for the rdf( pdf) formats run via rwservlet..
any pointer examplese would greatly help..
deepa

Hi Deepa,
Take a look at the cgicmd.dat file that comes with the iAS installation
ORACLE_HOME/reports/conf/
This file has examples for rwservlet as well as for jsp's. To quote from this file:
; Oracle9iAS Reports Services ;
; CGICMD.DAT ;
; Example CGICMD.DAT Mapping file ;
; Syntax:
; KEY : VALUE
; Where:
; KEY - the first argument of the rwservlet URL request (case insensitive).
; VALUE - command line parameters and/or special parameters.
; Keys can be referenced in the following ways:
; 1. Parameter on command line to the reports servlet
; e.g. http://machine/servlet/rwservlet?KEY
; 2. Parameter on command line to a reports jsp
; e.g. http://machine/mydir/myreport.jsp?KEY
; 3. Within a reports jsp - in the rw:report custom tag
; e.g. <rw:report parameters="KEY">
Also, you could take a look at the Publishing reports manual, Section 8.9
http://otn.oracle.com/documentation/reports.html
Navneet.

How to use the "target Data lines"?

Hello,
I want to program some DSP effects and filters with Java. I know to use the "Clip" and the "Sound" data lines in the Java Sound API, but it is difficult to me tu use the "target data lines" to do what I want to. So I have several questions :
I have found how to convert a clip to a target data line. I have understood how to get the int from the sounds via the target data line. But, when I have done the operations with this int, how to do again a sound from the int? Wich method must I use to "convert the int to a sound"?
Normally, oscillators and filters need to do an integration using the sample rate. Does anyone could give to me some exemples?
I have found code sources for C++ for DSP. Where could I find the same for Java?
Do you know a book about this subject, I did not find any?
Thank you for your help.

My idea is to create a byte array from the audio clip via a ByteArrayOutputStream, then to create an int or a float, then do the operations, and then do another audio line from the new byte array. Am I wrong?This is correct, I believe.
This byte array will have a size of 16 (for PCM or wave files) surrely.Not necessarily. If you're using 16-bit samples for PCM data, then every 2 array positions will be "a sample". Your byte array will be 2 times the number of samples.
You'll want to pull the data 2-bytes at a time and do basiclly:
byte[] data_in = new byte[2];
myTargetDataline.read(data_in, 0, 2);
short sample = (data_in[0] << 8) + (data_in[1]);Then do whatever you want to your sample, and then write it back...
byte[] data_out = new byte[] {
(byte)(sample >>> 8),
(byte)(sample )
mySourceDataline.write(data_out, 0, 2);I used a short instead of an int because it's 16-bit data, so it's a short. PCM may be an "unsigned" short, but you'll have to check into that yourself ;-)
To be perfectly honest, I've never done this so my sample code will probably need to be tweaked. But I hope it helps you get headed in the right direction, and gimme an update when you try it out.

How to use the program called ZSAPLINK to import Function Name

How to use the program called ZSAPLINK to import Function Name

Not sure why you posted into this forum?
Note the header for this forum:
This forum is dedicated to all other development-related questions which are not directly addressed by other forums. This includes Business Objects SDKs, products, or technologies which do not fall under BusinessObjects Enterprise, BusinessObjects Edge, Crystal Reports Server, or Crystal Reports (for example Desktop Intelligence SDK, Universe Designer SDK, Portal Integration Kits, Java User Function Libraries, and other third party technologies or development languages).
Ludek

How to use the parameter "data" in the vi of Nonlinear Curve Fit

I used "Nonlinear Curve Fit" to do state estimation. If I make the number of unknows a constant number, it is fine to code the fitting model for f(x,a). But if I want to code the number of unknows as a variable, how can I do this?
Maybe "data" should be used here. But I just could not find any examples talking about how to use "data" here.
Thanks.

Hey hilary,
Have you looked at the LabVIEW help for the Nonlinear Curve Fit VI? Which version of LabVIEW are you using? In mine, the VI is polymorphic, and you can declare the formula to be a formula string. Then it provides pins to enter the input parameters programmatically. Perhaps you could post a screenshot of how you are currently using the VI, and we could help more.
Brian B
Field Sales Engineer
Tennessee/Southern Kentucky
National Instruments

How to reverse the end date on Oracle Standard Benefits plan for a employee

Hi,
We tried to end date a medical benefit plan for an employee but did it wrong. It should show end dated 31-JAN-2010 and then we wanted to add a new plan starting from '01-FEB-2010'. But we wrongly end-dated as on 31-DEC-2010.
Can anyone help me to identifiy how to remove the wrong end date from the benefit plan for the employee..
Regards
Arun Kumar S Rathod

If you are using life events, just backout the life event and the end-date will go away. then create a fresh life event and make necessary changes.

How to use the MAX DATE condition in WHERE CLAUSE FILEDS

Hi,
I am trying to fetch the result for getting maximun date but when i try to execute the query i am getting the error as follows.
CONDITION : trunc(max(RD.DATERECEIVED)) BETWEEN TO_DATE('01/08/2011','DD/MM/YYYY') AND TO_DATE('01/08/2011','DD/MM/YYYY')
ERROR: Group function is not allowed here.
CHEERS,
PRABU AMMAIAPPAN

I see a couple of problems here.
First, what you posted below is not a syntactically valid query. It seems to be part of a larger query, specifically, this looks to be only the GROUP BY clause of a query.
Prabu ammaiappan wrote:
Hi,
I Have a group function in the Query. Below is the Query i have used it,
GROUP BY S.FREIGHTCLASS,
R.CONTAINERKEY,
S.SKU,
S.DESCR ||S.DESCRIPTION2,
S.PVTYPE,
RD.LOTTABLE06,
R.WAREHOUSEREFERENCE,
RD.TOLOC,
R.ADDWHO,
R.TYPE,
S.CWFLAG,
S.STDNETWGT,
S.ORDERUOM,
R.ADDDATE,
C.DESCRIPTION,
(CASE WHEN P.POKEY LIKE '%PUR%' THEN 'NULL' ELSE to_char(P.PODATE,'dd/mm/yyyy') END),
NVL((CASE WHEN R.ADDWHO='BOOMI' THEN RDD.SUPPLIERNAME END),SS.COMPANY),
RDD.BRAND,
S.NAPA,
RD.RECEIPTKEY,
R.SUSR4,
P.POKEY,
RDD.SUSR1,
r.STATUS, DECODE(RDD.SUSR2,' ',0,'',0,RDD.SUSR2),
rd.SUSR3Second, the answer to your primary question, "How do I add a predicate with with a MAX() function to my where clause?" is that you don't. As you discovered, if you attempt to do so, you'll find it doesn't work. If you stop and think about how SQL is processed, it should make sense to you why the SQL is not valid.
If you want to apply a filter condition such as:
trunc(max(RD.DATERECEIVED)) BETWEEN TO_DATE('01/08/2011','DD/MM/YYYY') AND TO_DATE('01/08/2011','DD/MM/YYYY')you should do it in a HAVING clause, not a where clause:
select ....
from ....
where ....
group by ....
having max(some_date) between this_date and that_date;Hope that helps,
-Mark

I want to use Get Panel Image in Labview 5.0.1 and need details on how to save the BMP data generated

I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?

Hi,
If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
send it to you (sorry, I won't, it's copywrited).
If you cannot get this VI anywhere, you'll need to figure out the BMP file
format yourself. It's not too complicated, but still could take some days.
Perhaps someone figured it out before LV5.1 was released.
Regards,
Wiebe.
"RDK" wrote in message
news:[email protected]..
> I want to use Get Panel Image in Labview 5.0.1 and need details on how
> to save the BMP data generated
>
> I am trying to generate an application that saves a copy
of its front
> panel on completion. This is easy to do using an invoke node with
> Print VI to HTML but this does not work in an .exe format. I have seen
> elsewhere that you have to use the Get Panel Image method, but no
> details are supplied in LV 5.0.1 documentation of how to use the
> "image" data (1-D Unsigned Byte array) that is generated. I want to
> save this in a format that can then be read as a bitmap in any
> standard graphics package. Any assistance?

Can we use the test data dictionery saved for a FM for any other FM

Hi experts,
i want to use the test data dictionary which i have maintained for a FM. now i want to use the same data for another FM.
Can i use that saved dictionary. if yes then how.
Points are sure.....
Thanks
Ashish

Amit,
Yes i can, but this fm is calling from some another applications (front end) and that is a big scenario. and that will be really vary time consuming so i want to do in this way.
If this is not possible then the last way i have to opt is to do excercise again .
Thanks

How to use my saved data?

Hello. I have a big problem and your sony experts are my last chace. Accidentally I have deleted some of my applications from my ps4. In my ps4 storage I have all the saved data from my games and aplications. I do not know how to use the saved data in order NOT TO START each game from the beginning. It should be a way to use the saved data, but I do not know how. It is totally my mistake, BUT PLEASE HELP ME. I need your help. Could you tell me Each step I have to follow in order to continue the games from my last save? It should be perfect. I wait however uyou say, but please help me.

I have answered this in your other post.

HT1689 can anyone simply tell me how to use the "find my ipod" feature through my itunes account that has the ipod registered?

Can anyone tell me how to use the "find my ipod" app that I have for my ipod? I have the ipod registered on my itunes account but I can get the serial # to send it in for apple support? How does this feature work? Thanks

Turn on your computer.
Open your Browser.
Go to icloud.com
Select find my iphone/ipod

How to get the complete data from Webdynpro using a RFC

hi guys,
A form is created in the webdynpro, when that pdf form is called the user have to provide the key field ie the employee number in the form and then when he press the 'go' button a rfc is called and it gives all the details of the employee in the form. Then the user have to input some fields in the form and he have press the submit button. My problem is here, when the user is going to press the submit button that form will be converted to a stream (binary) of data and it is sent to one of the import parameter used in the RFC.
I have created a RFC and created a import parameter of data type XSTRING, since i want to see what exactly R3 is receiving from web dynpro i am writing this contant in the sever as a text file. When i saw that text file i cant see the complete data.
And when i searched in R3 the capacity of xstring is 1024 CHAR, so i dont know how to capture the entire data from webdynpro into my R3.
I give the code what i worte please tell me am i missing anything in my code, or is there any data type which can hold more than 500kb of data which is coming from webdynpro.
FUNCTION ZSEND_MAIL_ATTACHMENT.
""Local Interface:
*" IMPORTING
*"     VALUE(OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(BIN_DATA) TYPE INDX_CLUST OPTIONAL
*" TABLES
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
      gd_sent_all(1) TYPE c,
      gd_error TYPE sy-subrc,
      tab_lines LIKE sy-tabix.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE. "sOLIX
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
data : v_bin_data like SOLISTI1 occurs 0 with header line.
DATA : gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
*data bin_data1 like table of solix with header line.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
DATA V_SUBJECT(255) VALUE 'HI'.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
*CALL FUNCTION 'GUI_UPLOAD'
*EXPORTING
*filename = V_FILE_PATH
*filetype = 'BIN'
*TABLES
*data_tab = BIN_DATA.
move bin_data to v_bin_data.
append v_bin_data.
*move soli to bin_data.
LOOP AT V_BIN_DATA into objbin.
MOVE v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
data file(255) value '/tmp/bali.txt'.
*Appending The Internal Table it_receivers
close dataset '/tmp/bali.txt'.
open dataset '/tmp/bali.txt' for output in text mode encoding default.
if sy-subrc = 0.
loop at objbin.
transfer objbin to '/tmp/bali.txt'.
endloop.
else.
write 'hi'.
close dataset '/tmp/bali.txt'.
endif.
it_receiver-receiver = '[email protected]'.
it_receiver-rec_type = 'U'.
it_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
**Function Module To Post The Message To Externa Mail
     CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
         document_data              = gd_doc_data
         put_in_outbox              = 'X'
         commit_work                = 'X'
       TABLES
         packing_list               = it_packing_list
         CONTENTS_TXT               = objbin
         receivers                  = it_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
     clear wa_receiver.
ENDFUNCTION.

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
   put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

How to use the customer types in customer master data

how to use the customer types in customer master data?
menu path is Extras -> account group info -> customer types

hi,
This is an option given to you to choose (if you need to) the way you perceive this customer.Here you get options including ompetitors,Salespartner, prospect,
default sp ,consumer.
See it helps you to differentiate between prospect(which you may use for quotation or inquiry purpose)Sales partner and the competetor.
I hope this clarifies your quiery.Reward points if so.
Thanking you,
Best regards,
R.Srinivasan

How to get the context data using java script in interactive forms

Hi All,
How to get the context data using java script in interactive forms by adobe, am using web dynpro java
thanks.

Hi venkat,
Please Refer this link.
Populating one Drop-Down list from the selection of another Drop-down list
Thanks,
Raju.

How do i figure it out what app use the cellular data in standby mode?

How do i figure it out what app use the cellular data in standby mode? I disabled the cellular data for 3 days, and my battery last longer. I don't use push notifications, neither location services. I'm not signed in in skype or any IM app.

Do you use push email? Do you have accounts that have synchronized calendars associated with them? Those features will still use cellular data in the background as the receive mail and send or receive calendar updates.
Some notifications, like push notifications from Facebook and other social networking sites may use cellular data in the background. Basically, any automated data task like those may use cellular data when the phone is in standby (note that wifi would be used if available when the phone is active, but wifi turns off in standby and all data goes through the cellular data connection).

How to use the cgicmd.dat to specify a directory name for desname

Similar Messages

Maybe you are looking for