How to use the Compounding Key in BPC10NW like BW info objects?

Hi experts.
We are longing the suitable solution in BPC-NW 10.0 to deal with compounding key like BW info objects.
We want to define the dimension with compounding key MATERIAL and PLANT, but BPC-NW 10.0 doesn't support it. Therefore we just defined the dimension "PLANT" as entity and "MATERIAL" as user-defined dimension with concatinated key "Material code-Plant code" as ID.
For instance:
-[Dimension PLANT] as type-E (entity)
ID
1000
2000
3000
-[Dimension MATERIAL] as type-U (user-defined)
ID        ENTITY MATNR
1000-AAAA 1000   AAAA
1000-BBBB 1000   BBBB
2000-AAAA 2000   AAAA
2000-CCCC 2000   CCCC
3000-BBBB 3000   BBBB
3000-CCCC 3000   CCCC
(ENTITY and MATNR were defined as properties, and ENTITY filled the each member including dimension Plant)
Now we built a input form with following conditions:
-Page axis : ACCOUNT=Revenue, etc...
-Row axis : ENTITY=1000 or 2000, MATERIAL=all
-Column axis : TIME=Jan, Feb, Mar...
The result report came out as follows:
Revenue
PLANT MATERIAL   Jan Feb Mar ...
1000   1000-AAAA 0   0   0   ...
1000   1000-BBBB 0   0   0   ...
1000   2000-AAAA 0   0   0   ...
1000   2000-CCCC 0   0   0   ...
1000   3000-BBBB 0   0   0   ...
1000   3000-CCCC 0   0   0   ...
2000   1000-AAAA 0   0   0   ...
2000   1000-BBBB 0   0   0   ...
2000   2000-AAAA 0   0   0   ...
2000   2000-CCCC 0   0   0   ...
2000   3000-BBBB 0   0   0   ...
2000   3000-CCCC 0   0   0   ...
But we expected to have a report restricted MATERIAL with their property on specified PLANT in member selector such as:
Revenue
PLANT MATERIAL   Jan Feb Mar ...
1000   1000-AAAA 0   0   0   ...
1000   1000-BBBB 0   0   0   ...
2000   2000-AAAA 0   0   0   ...
2000   2000-CCCC 0   0   0   ...
How do we obtain the expected result? Please give us the good solution!
Best regards,
Masa

Hi Vadim.
GREAT! Our requirement is fulfilled by that way you described. Special thanks for your help!!!
Best regards,
Masa

Similar Messages

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help

Out of the box, to use the function keys as function keys, hold down the fn key when you press the key. Otherwise, you get the picture function on the key. You can reverse this behavior in the Keyboard system prefs.

How to use the Function keys as function keys instead of action keys?

When I press F1 or any of the other F keys it does what the symbol says on the key (volume/skip track etc).
How do I actually use the F keys and not the symbols?

Hi again John,
...is there a way to switch that around so I use the "fn" key for sound etc?
Do the following:
1. Fire up System Preferences
2. Select Keyboard & Mouse
3. Select the Keyboard tab.
4. Tick the "Use all F1, F2, etc. keys as standard function keys" box.
That's it. You have now reversed the default use of the function keys. If you need to increase/decrease sound, brightness etc then press 'fn' plus the appropriate function key.
Kryten

SSL: How to use the same key pair for ABAP & JAVA?

Hello,
I want to setup an XI (3.0 on Netweaver04)installation in the way, that ABAP AS and JAVA AS use the same key pair for SSL. My problem is to define the same private key on ABAP and JAVA. With the JAVA Administrator I am able to define or import a private key. But I could not find a possibility in ABAP to manage private keys in order to use the same on as in JAVA. What is the procedure for this?
Thanks and Regards,
Frank Tottleben

Hello,
I want to setup an XI (3.0 on Netweaver04)installation in the way, that ABAP AS and JAVA AS use the same key pair for SSL. My problem is to define the same private key on ABAP and JAVA. With the JAVA Administrator I am able to define or import a private key. But I could not find a possibility in ABAP to manage private keys in order to use the same on as in JAVA. What is the procedure for this?
Thanks and Regards,
Frank Tottleben

How to use the distinct key in formula field in SAP Crystal Reports

I want to use the distinct key in formula field in SAP Crystal reports.
When i'm using it shows an error.
Please suggest me....

Hi,
Use DistinctCount keyword directly for your calculation instead of count(distinct(....
Alternatively, if you want to avoid duplicate records, under "File" > "Report Options" make the 'Select Distinct Records' as True.
Thanks,
Raghavendra

How to use the windows key (super or hiper) as a keystroke modifier?

I can associate the windows key (KeyEvent.VK_WINDOWS) as a regular key on a KeyStroke without problem.
It can be alone or with a modifier, like CTRL+WIN
KeyStroke.getKeyStroke( KeyEvent.VK_WINDOWS, InputEvent.CTRL_DOWN_MASK )My doubt is: Is there a way to use it as a modifier?
In other words, is it possible to create the KeyStroke using the windows key with any other? e.g. "WIN+K"
Thanks,
Henrique Abreu

Thanks a lot for the quick answer.
Your KeyboardCommands class doesn't do it (but gives the idea), because it can only trigger an action on one key (like KeyStroke, that handles key+modifier).
I could make big changes on it to add the functionality of triggering an event on a combination of keys, which would solve my problem.
Although this solution is not so good because we totally give up of actions in Swing, which I mean stuff like actionMaps, InputMaps WHEN_ANCESTOR_OF_FOCUSED_COMPONENT, etc.
If KeyStroke class really doesn't provide this (unbelievable!), I wonder if there is a way to extend and enhance it? (or AWTKeyStroke)
Can anyone say if its possible, before I go deep and find out that it isn't?
Another secondary question (that I think doesn't worth a new topic), what's the META_DOWN_MASK or META_MASK? or where is this key?
Henrique Abreu

How to use the RSA key files generated by Crypto++ in java

Hi - Good day to all :)
I have two RSA key files(private key file and public key file) generated by Crypto++ 5.2.1:
code here:
void GenerateRSAKey(unsigned int keyLength, const char *privFilename, const char *pubFilename, const char *seed)
     RandomPool randPool;
     randPool.Put((byte *)seed, strlen(seed));
     RSAES_OAEP_SHA_Decryptor priv(randPool, keyLength);
     HexEncoder privFile(new FileSink(privFilename));
     priv.DEREncode(privFile);
     privFile.MessageEnd();
     RSAES_OAEP_SHA_Encryptor pub(priv);
     HexEncoder pubFile(new FileSink(pubFilename));
     pub.DEREncode(pubFile);
     pubFile.MessageEnd();
}generated private key is:
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use this key in java
BufferedInputStream input=new BufferedInputStream(new FileInputStream("privateKey"));
          int size= input.available();
          byte[]buffer=new byte[size];
          input.read(buffer);
X509EncodedKeySpec lX509EncodedKeySpec = new X509EncodedKeySpec(buffer);
          PrivateKey lPrivateKey = KeyFactory.getInstance("RSA").generatePrivate(lX509EncodedKeySpec);there is a exception,at generatePrivate() method
at sun.security.rsa.RSAKeyFactory.generatePrivate(RSAKeyFactory.java:294)
     at sun.security.rsa.RSAKeyFactory.engineGeneratePrivate(RSAKeyFactory.java:171)
     at java.security.KeyFactory.generatePrivate(KeyFactory.java:322)
     at test.Main.main(Main.java:27)any body can help me?

X509 is for public keys, not private keys. You need PKCS8 using PKCS8EncodedKeySpec on the hex decoded private key string.
Your method for reading the private key from the file is flawed. The method available() does not guarantee to give you the file length. This is easy to prove since files can be longer than Integer.MAX_VALUE and available() returns an 'int'. To get the file length use File.length() which returns a 'long'. Also, reading from an InputStream using
input.read(buffer); does not guarantee to read all the bytes. For that you need to use something like DataInputStream.readFully().

How to use the bootp_enabled key with dscl command create

During Netboot service configuration I wanted to do it right and followed the suggestions in "System Imaging and Software Update Administration" (page 22):
+"To prevent the NetBoot BootP server from responding to+
+requests for IP addresses, use the dscl command-line tool to open the local folder on the NetBoot server and add a key named bootp_enabled with no value to the /config/dhcp/ folder."+
so I first tried to read the local directory:
xadmin$ *sudo dscl . -read /config/dhcp/*
AppleMetaNodeLocation: /Local/Default
RecordName: dhcp
RecordType: dsRecTypeNative:config
and then to create the key:
xadmin$ *sudo dscl . -create /config/dhcp/ bootp_enabled*
* Uncaught Exception: <NSInvalidArgumentException> ([DSoDataNode initWithDir:value:] value is not a valid NSString nor NSData)
but did not succeed. Somthing must be wrong with the syntax. Tried several (Config, dhcp noslash, bootp_enabled:) but nothing helped.
You dscl experts - please enlighten me!
Btw. Apple why not include to correkt syntax in a manual?

worked for me, too
Thanks a lot,
Willi

How to use the command key with shortcuts/CS6?

Since ID2 I am using the combination Command+Escape to define a shortcut.
Buy this time Escape could not be tagged.
I was trying to remember if those years ago I modified escape key in some place (system preferences/keyboard) but neither could find a path to reconstruct this.
Also check the escape key in other shorcuts to avoid problem but no way.
Searched the forum but could not find something helpful
http://forums.adobe.com/message/2977659

[Jongware] wrote:
I guess that makes it an InDesign problem ...
Searching yesterday found it is an old topic, but not related to Adobe but to Apple: including thriller plots like that they are preserving the combination command+escape for future projects...
https://discussions.apple.com/thread/3438952?start=0&tstart=0
https://discussions.apple.com/thread/3569274?start=0&tstart=0
Also it has been resolved by programmers with very interesting formulae like the «Escape Key Liberator» (sic):
http://manytricks.com/blog/?p=1664
In my situation it was enough to reset the Apple Keyboard shortcuts...
Thank for your reply.

[Bug?] How to use the Tab key in forms

Ahoy!
The latest release of Photoshop has "broken" the native behavior of the Tab key in html panels. I'm not sure if this is a bug or just a new API I need to incorporate.
Expected behavior:
1. Focus into text field in a form
2. Hit the Tab key
3. The next field is focused.
Actual behavior
1. Focus into text field in a form
2. Hit the Tab key
3. Photoshop hides the application UI (Photoshop hotkey tab behavior).
Anyone happen to know if there's something that can be done about this?

Bug is very annoying for our users when they try to input their usernames and passwords to login (often) and also when they're filling out a large form with four fields in it.
Hope it is fixed soon or a work around provided.
Tom Wrenn
Frontend Engineer
CreativeWorx

I can not find how to use the basic Mac air keyboard. where do i find it or do a tutorial board

I am new to the Mac worls and hardly used a PC . I used a Blackberry. How can i find how to use the macair key board. I can not get the plus sign or the brackets on my leyboard to work. The option key is called the atl key.. There is no easy guide for how to use all the Buttons on the Key board. where do i find them

Hello Sanjit_Das:
sorry for my english again !.
My purpose is almost the same as this:
https://forums.adobe.com/message/6137964#6137964#6137964
But I do not know which path must specify when the video is uploaded to assets:
Sorry to ask something so absurd.
I tried putting all
<source src = "assets / Myvideo.mp4" />
not working
<source src = "C: \ Users \ Angel \ Downloads \ NEW \ pruebamusevideo \ assets/Myvideo.mp4">
not work.
etc
Presenting want to work from any computer, DVD, memory stick ...
I'm going crazy.
I know it's something about the route.
From muse Vimeo links to work, but when I export them to HTML not working. I guess it's a problem related to the same.
Thank you very much again.

How to use the validation work in Both TAB and Mouse keys in Forms6i

Hi,
I have a validation script once it's validated it should execute the query.But using When-Validate-Item i can't use execute_query.I am able to use the validation in Key-Next-Item trigger but if the user moves the cursor using mouse then it's not working.
How to use the validation script working in Both Scenarios(Tab and Mouse keys).
Can anyone please give inputs to rectify the above issue?.

So you have multiple fields, but on at least one of them if it's valid you immediately want to execute the query?
You could create a hidden field in a control block Query_Now default 'N'. In a WHEN-VALIDATE-ITEM on your item, if it's determined to be valid, then set Query_Now to 'Y'.
In a WHEN-NEW-ITEM-INSTANCE at block level, check if Query_Now is 'Y'. If it is then execute the query (and set it back to 'N').

How do I delete Windows 7 from Paralells so that I can use the Product Key on a different computer?

I bought Windows 7 to install on my Mac via Paralells. When I wasn't home, my brother took it and installed it on his computer. Now, I was able to install Windows 7 on my computer but I cannot activate it, since I can only use the Product Key for one computer. How can I get the Product Key deactivated so that I can use it on my computer?

Please post Parallels related questions on the Parallels forums. Apple Communities only provide support for Apple products:
http://forums.parallels.com

How do you navigate dialogue boxes using the tab key in Photoshop CS6 on Mac OS X Mavericks?

I know that seems really 101 and obvious, but I worked in Photoshop on a PC for many years, and using the tab key to navigate through every field/radial button/dropdown menu/etc. was never an issue. On the Mac OS X however, it only navigates through certain fields within a dialogue box. And before the guaranteed suggestion to change my Mac OS X Keyboard preferences to allow full keyboard access to "All Controls" instead of "Text Boxes and Lists Only", I have already tried this setting which did not resolve my issue.
Does/has anyone out there worked between both platforms and had this issue as well? I'm a Mac guy through and through, but I must say, this is the one thing that I think PC has a slight edge on. It's incredibly frustrating to have my keyboard workflow interrupted because I can't simply tab over to a certain field that is in a dialogue box which I'm currently working in...
Here are my details:
Photoshop CS6 (13.0.6)
Mac OS X Mavericks (10.9.1)
Applies to all filetypes as the issue is regarding dialogue boxes and not files themselves.
No error message.
Normal use.
It works on PC, but not on Mac.
2.3 GHz Intel Core i7 Processor
8 GB of memory
719 GB of space available on my main HD
This has never worked in any version of Photoshop I have used on any version of Mac OS X, but has worked consistently on every version of Photoshop that I have used on every version of Windows I've used (up to Windows 7)
I hope this provides enough information to get the ball rolling on this. I fear that there is no answer that will resolve the issue, but before I throw in the towel, I figured it was worth trying this forum since my web searches have turned up absolutely nothing of help.
Thanks in advance for your time and help.
Best,
Tim

Thanks for your input. Since Safe Mac's Adware Removal tool has done a very good job of cleaning out the junk and
letting me run better, I'm happy for now.
However, I appreciate your judgement and I am working on evaluating Safari vs FireFox vs Chrome. I've had some trouble using FireFox with
LastPass which works very well under Chrome. But that is only one data point. Most of my Ram troub;e os related to the number of windows
and tabs I open. I've tried comparing the three browsers for how back each reacts.
I multiply windows and tabs because as I surf the web, I discover things I want and don't want to lose them. However, I need a tool more useful
and structured than bookmarks to be able to record things of interest to make them easy to return to and find later.

How can I use the enter key instead of tab to change field focus?

I am using Acrobat 9 Pro.
We have a fillable PDF where the users enter numbers into fields. They want to be able to use the <enter> key on the 10-key pad instead of the <tab> key on the keyboard to move the focus to the next data entry field.
How can I set my PDF so that it recognizes the <enter> key instead of the <tab> key for changing focus?
Thanks!

You can use a custom Keystroke script, something like:
// Custom Keystroke script for text field
if (event.willCommit && event.commitKey === 2) {
getField("Text2").setFocus();
Where "Text2" is the name of the next field. This doesn't disable the Tab key though. For more information, see: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.608.html

How to use the Compounding Key in BPC10NW like BW info objects?

Similar Messages

Maybe you are looking for