How to use the exceptions in a RFC ?
I can use XI (through BPM) to call a RFC and get response from the "Export" of a RFC. But could I get the exception from the "exception" of a RFC ?
I tried to write a RFC which will generate a exception and I found it in the XI monitor, but how to use it ? i.e. sometimes I need to get the "export", but sometimes I need to get "exception". Is there any documents or examples for it ? thanks.
Hi,
<i>But for fault message, I don't know how to send it to a receiver.</i>
There is no other configurations that you need to do with respect to fault messages.
If the rfc returns an exception, this message, is passed on to the receiver instead of the response message.
The receiver of the fault message will be the system that sent the request.
<i>(If I can use a transformation to mapping it to other message, I think it's ok too.)</i>
You need not use a BPM, for this, in case you are using it only for fault message handling.
All you need to do is, create a message mapping, with source and target message types as RFC exceptions and carry out a one to one mapping.This would display the exception coming from the RFC as the fault response st the sender.
In case, the exception returned from the RFC is not self-explanatory, you could map constants to the target message type(in message mapping) which would explain the reason for the fault.
Regards,
Smitha.
Similar Messages
-
How to log the exception using Log action in Oracle Service Bus
Hi,
Whenever an exception is raised how to log the exception using Log action in oracle service bus.After logging where I have to find the logged message.It would be in the log file for the managed server which ran the request. If you are logging the message at a lower level than your app server, however, you won't see it. You should be logging the exception at Error level.
-
How to use the validations and exceptions in BPEL
Hi,
How to use the validations and exceptions in BPEL.
pls provide one sample example to give the exceptions and validations in BPELHi,
For example you can create a simple BPEL Process and you can throw an error during running process. If input data is not valid and format is not correct you can throw error using throw activity and using catch activity you can catch particular error. The catch-all will handle all the error occurred with the scope.
you can also refer faulthandling section in the link for more information related to exception handling.
http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/faults.htm#sthref1188
Regards,
Deepa -
Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?
It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that. -
JNI - How to use the error reporting mechanism?
I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL; -
How to use the change log in ODS to track Delta change?
People say that historical data (like Delta change) in ODS can be tracked in the Change Log. How to use the change log to track historic data?
ThanksKevin
See if it helps
Every ODS object is represented on the database by three transparent tables:
Active data: A table containing the active data (A table)
Activation queue: For saving ODS data records that are to be updated but that have not yet been activated. The data is deleted after the records have been activated.
<b>Change log: Contains the change history for delta updating from the ODS Object into other data targets, such as ODS Objects or InfoCubes for example.</b>
An exception is the transactional ODS object, which is only made up of the active data table.
The tables containing active data are constructed according to the ODS object definition, meaning that key fields and data fields are specified when the ODS object is defined. Activation queue and change log are the same in the tables structure. They have the request ID, package ID and the record number as a key.
Data base structure changes
http://help.sap.com/saphelp_nw04/helpdata/en/d2/d53ec3efdc9b47a9502c3a4565320c/frameset.htm
Hope this helps
Thnaks
Sat -
How to use the "out" parameter in idl
hello.idl:
module HelloApp
interface Hello
string sayHello();
void getPass(in string name,out string pass);
HelloServer:
public class HelloServer
class HelloServant extends _HelloImplBase
public void getPass(String name,org.omg.CORBA.StringHolder pass)
System.out.println("Server pass = " + pass);
if (name.equals("lxh"))
pass = new org.omg.CORBA.StringHolder("1234");
if (name.equals("cbj"))
pass = new org.omg.CORBA.StringHolder("5678");
HelloClient:
public class HelloClient
public static void main(String args[])
try{
org.omg.CORBA.StringHolder Pass = null;
if (args.length == 1)
System.out.println("Client pass = " + args[0]);
helloRef.getPass(args[0],Pass);
System.out.println(Pass);
} catch(Exception e) {
When I run client main method with parameter "lxh",I will get a error says the getPass() parameter which has given is wrong.
How to use the out parameter in client?Does this error only occurs if you pass "lxh" or always?
Did you try passing a StringHolder Object rather than a NULL Object?
Perhaps you can post the error message!? -
Does anyone know how to use the earphones( plugs) that come with iPhones?
Mine is still fairly new and I am just learning how to use certain things.They're pretty straightforward. You plug them into the headset jack (the hole on the top left of your phone). You put the buds in your ears. All sounds, except for the phone ringing will now come through the earbuds.
-
How to write the exceptions in function module
dear all,
how to write the exceptions in function modules with example.
thanq
jyothiHi,
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE except.
und
MESSAGE.....RAISING except.
The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
If the calling program does not handle the exception
· The RAISEstatement terminates the program and switches to debugging mode.
· The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION read_spfli_into_table.
""Local Interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
IF sy-subrc NE 0.
MESSAGE e007(at) RAISING not_found.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Calling READ_SPFLI_INTO_TABLE
The following program calls the function module READ_SPFLI_INTO_TABLE:
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
wa LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
EXPORTING
id = carrier
IMPORTING
itab = jtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CASE sy-subrc.
WHEN 1.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
MESSAGE e702(at).
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
Or
just have to decide what exceptions u want and under what conditions.
then declarethese exeptions under the exceptions tab.
in the source code of ur function module.
if
like this u can code .
now when u call the function module in tme mainprogram.
if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
in the fm u can program these sy-subrc values and trigger the code for ur exception.
Please reward if useful
Regards,
Ravi
Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM -
How to use the BAPI_VENDOR_CREATE
Hi Experts,
Could anyone explain me, how to use the BAPI, 'BAPI_VENDOR_CREATE' !
Our requirement is to create vendors from the third party system say like 'BIZTALK' . Those people will be connecting to our SAP server through a custom RFC, which I have to create and in that RFC, I have to call this BAPI. since the BAPI, 'BAPI_VENDOR_CREATE' doesn't have any import parameters, I am unable to pass the Vendor numbers and other fields say like, 'COMPANY CODE, ACCOUNT GROUP, STREET etc.., ' , which are also needed by the time of creating vendors.
Can anyone help me out, how to solve this issue!!! Or else is there any otherway of approaching this problem, also please let me know...
Thanks in advance.
SOMU.You have to pass Header and GM code as the INput parameters for uing this BAPI....GM code would be structure.
Also you have to pass the INternal table Item for the goods mvt cxreate which will contains
BATCH.
MOVE_TYPE.
ENTRY_QNT.
MOVE_PLANT.
MOVE_STLOC.
MOVE_BATCH.
MOVE_REAS
these parameters.
Regards,
Sushil. -
How to use the cases in button action?
Hi Experts,
I want to get a prompt message if the field is empty.I got it but at the same time if the field is filled I want the other action to be performed that is to call a BAPI and give me output.How can I give two events for the same action.
How to use the cases in button action?
So, please guide me.Urgent need
Regards
NutanHi Nutan,
if I understand you, then you have a simple validation. Therefore you can use the validation functionality of VC for your components. An alternative could be by writing a new ABAP RFC function module like:
BAPI Input parameters as input and BAPI output parameters as output and an additional return code or string for a message:
IF I_FIELD IS INITIAL.
E_RETURN_CODE = "THE FIELD IS EMPTY."
ELSE.
CALL FUNCTION <YOUR_BAPI>
<BAPI PARAMETERS>
ENDIF.
I hope that helps.
Best Regards,
Marcel -
How to use the method setReadTimeout(int longtimes) in HttpUrlConnection?
I have to use the HttpUrlConnection to download files ,sometimes the speed is very slow or just blocked for no reason.(no Exception was throw and I can't see any changes from my swing Interface)
It seems the thread is dead. I try to use setReadTimeout() to control the read . but it isn't working ,
Now I have to questions?
one how to use the setReadTimeout() so it can throw the SocketTimeoutException like the API said
second how to solve the problem I metioned before : sometimes the speed is very slow or just blocked for no reason
Please somebody help me !!!That is not true. For example ajax continuous, http monitor or media streaming in client side is unusable without nio http client (or implementation is much simple and better). All logic is coming to client side from server. Modern client are very powerful and same time servers are overloaded.
-
How to understand the STAD relevant for RFC
Hello performance experts.
I have question about how to understand the STAD relevant for RFC.
I want to know how to calculate the response time of action of "Push save buttion"
which call function module by RFC.
In our system, the screen is created using web dynpro and after push the button,
function module for application will be called.
When I push Save button, 2 STAD line is created.
One is for function code " SAVE" and the other is for "RFC".
Line for "SAVE" include RFC as client, and RFC line has RFC info as server (also client)
I wonder how I should calculate the response time of action"Save" button in following case.
Should I add the 2 response time?
1) 5,867 ms + 5,797 m is collect?
2) 5,867 ms include RFC time, so no need to sum the value and 5,867 ms is collect??
3) 590 ms + 5,797 ms is collect?
4) Or other calculation is correct ?
1) STAD for function code:
CPU time 578 ms
RFC+CPIC time 5,280 ms
Total time in workprocs 594 ms
Response time 5,867 ms
Processing time 590 ms
Load time 1 ms
Wait 5,273 ms
Roll (in+wait) time 5,274 ms
as Client
Number Connections 1
Destinations 1
Users 1
Calls 2
Time Calling 5,280 ms
Remote execution 10,527 ms
Idle 11,110 ms
Data Sent 135,836 Bytes
Received 620 Bytes
2) STAD for RFC
CPU time 1,406 ms
RFC+CPIC time 9 ms
Total time in workprocs 5,080 ms
Response time 5,797 ms
Processing time 2,132 ms
Load time 50 ms
Roll (in+wait) time 718 ms
Database request time 2,882 ms
Enqueue time 16 ms
Roll time
Wait 717 ms
as Client
Number Connections 1
Destinations 1
Users 1
Calls 4
Time Calling 9 ms
Remote execution 1 ms
Idle 0 ms
Data Sent 686 Bytes
Received 1,360 Bytes
as Server
Number Connections 1
Destinations 1
Users 1
Calls 2
Time Calling 5,272 ms
Remote execution 5,269 ms
Idle 11,118 ms
Data Sent 620 Bytes
Received 135,760 Bytes
Thanks for your cooperation in advance.
KeiichiroHi Keiichiro,
I wonder how I should calculate the response time of action"Save" button in following case.
Should I add the 2 response time?
1) 5,867 ms + 5,797 m is collect?
2) 5,867 ms include RFC time, so no need to sum the value and 5,867 ms is collect??
3) 590 ms + 5,797 ms is collect?
4) Or other calculation is correct ?
It depends of what you mean with response time of action "Save" button.
If you mean ALL time, the value is 5.867 because the local time from save was 594ms, the "external" RFC time was 5280ms.
If you want separete analysis, the 594ms is your option since the 5280ms is in other part...
Also, analysing the other part there's another other part which represents a good part of processing time:
Database request time 2,882 ms
Hope this help youl.
Regards, Fernando Da Ró -
How to use the function module ....
hi
how to use the function module ssf_function_module_name in smartformsHi..
If you are using this Function module, you can get the generated function module name of smartform dynamically. It is good progrmaming practice to get the fucntion module name dynamically because there might be some problems if you are hard coding in program.
This will return the name of the function module and then from the exporting parameters you can use the fucntion module name to pass parameters to Smartforms.
Check this link.I am expalining here how to use this function module.
https://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=36109&version=2
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>Reward points if useful</b>
Regards
Ashu -
How to use the function module /IRM/IPBB_AGREEMENT_CREATE.
Hi all,
Please help me how to use the function module /IRM/IPBB_AGREEMENT_CREATE.
It is a Vistex fuction module which is used to create Sales contract in SAP-Vistex. If anyone has use the function module and do have the sample code please share it.
Thanks.FORM create_agreement TABLES pt_agreement
CHANGING po_agreement .
CONSTANTS: c_strt_knumh TYPE knumh VALUE '0000000000'.
DATA: lc_kona TYPE /irm/s_gkona,
lc_cbasp TYPE /irm/s_ipcbasp,
lt_cbapr TYPE /irm/t_ipcbapr, "Partners
lc_cbapr TYPE /irm/s_ipcbapr,
lt_cbadt TYPE /irm/t_ipcbadt, "Dates
lc_cbadt TYPE /irm/s_ipcbadt,
lt_cbafs TYPE /irm/t_ipcbafs,
lc_cbafs TYPE /irm/s_ipcbafs,
lt_cbacn TYPE /irm/t_ipcbacn,
lc_cbacn TYPE /irm/s_ipcbacn,
lt_cbacl TYPE /irm/t_ipcbacl,
lc_cbacl TYPE /irm/s_ipcbacl,
lt_cbtpv TYPE /irm/t_ipagtpv,
lc_cbtpv TYPE /irm/s_ipagtpv,
lt_texts TYPE text_lh,
lc_texts TYPE itclh,
lt_cbasd TYPE /irm/t_ipcbasd,
lc_cbasd TYPE /irm/s_ipcbasd,
lc_agreement TYPE /irm/s_ipcbasp_doc,
lc_e_log_number TYPE balognr,
lt_messages TYPE /irm/t_gprolog.
DATA: lt_vake TYPE cond_vakevb_t,
lc_vake TYPE LINE OF cond_vakevb_t,
lt_konh TYPE /irm/t_gkonh,
lc_konh TYPE LINE OF /irm/t_gkonh,
lt_konp TYPE /irm/t_gkonp,
lc_konp TYPE LINE OF /irm/t_gkonp,
lt_konw TYPE /irm/t_gkonwu,
lc_konw TYPE LINE OF /irm/t_gkonwu,
lt_konm TYPE /irm/t_gkonmu,
lc_konm TYPE LINE OF /irm/t_gkonmu,
lt_komg TYPE /irm/t_gkomg_index,
lc_komg TYPE LINE OF /irm/t_gkomg_index,
lt_user_data TYPE /irm/t_gpraxfu_index,
lc_user_data TYPE LINE OF /irm/t_gpraxfu_index.
DATA: lc_updt(1) TYPE c.
DATA: lc_knumh TYPE knumh.
DATA: BEGIN OF lc_str_knumh,
hd(2) TYPE c VALUE '$$',
inc_num(8) TYPE c,
END OF lc_str_knumh.
DATA: blank_agree_key TYPE knuma VALUE '~~~~~~~~~~'.
FIELD-SYMBOLS <konh_line> LIKE LINE OF lt_konh.
FIELD-SYMBOLS <konp_line> LIKE LINE OF lt_konp.
DATA: lc_rule TYPE type_key_rule.
READ TABLE pt_agreement INTO lc_rule INDEX 1.
SELECT SINGLE * FROM kona
WHERE vkorg = lc_rule-vkorg
AND vtweg = '10'
AND spart = '10'
AND boart = 'ZPS1'
AND botext = lc_rule-sap_agkey.
IF sy-subrc = 0.
lc_updt = 'U'.
ELSE.
lc_updt = 'I'.
ENDIF.
LOOP AT pt_agreement INTO lc_rule.
MOVE sy-tabix TO lc_str_knumh-inc_num.
CONDENSE lc_str_knumh-inc_num NO-GAPS.
WHILE lc_str_knumh-inc_num+7(1) = ' '.
CONCATENATE '0' lc_str_knumh-inc_num INTO lc_str_knumh-inc_num.
CONDENSE lc_str_knumh-inc_num NO-GAPS.
ENDWHILE.
CONCATENATE '$$' lc_knumh INTO lc_knumh.
MOVE lc_str_knumh TO lc_knumh.
MOVE c_strt_knumh TO lc_knumh.
CLEAR: lc_konh, lc_konp, lc_komg.
MOVE: lc_rule-vkorg TO lc_komg-komg-vkorg,
'10' TO lc_komg-komg-vtweg,
'10' TO lc_komg-komg-spart,
p_waers TO lc_komg-komg-waerk,
'1300' TO lc_komg-komg-bukrs,
lc_rule-lifnr TO lc_komg-komg-lifnr,
lc_knumh TO lc_komg-knumh,
lc_knumh TO lc_konh-knumh,
lc_knumh TO lc_konp-knumh,
lc_rule-datab TO lc_konh-datab,
lc_rule-datbi TO lc_konh-datbi.
CASE lc_rule-tablnam.
WHEN 'A701'. "Every Agreement will have a A701 rule -
"Therefore we acn setup the header using A701
MOVE: 'New ' TO lc_kona-knuma,
lc_rule-vkorg TO lc_kona-vkorg,
'10' TO lc_kona-vtweg,
'10' TO lc_kona-spart,
'ZPS1' TO lc_kona-boart,
'C' TO lc_kona-abtyp,
'V' TO lc_kona-kappl,
p_waers TO lc_kona-waers,
lc_rule-knuma_ag TO lc_kona-abrex,
'ZPS2' TO lc_kona-kobog,
lc_rule-datab TO lc_kona-datab,
lc_rule-datbi TO lc_kona-datbi,
lc_rule-sap_agkey TO lc_kona-botext,
'1300' TO lc_kona-bukrs,
'I' TO lc_kona-updkz.
MOVE: 'New ' TO lc_cbasp-knuma_ag,
'ZPS1' TO lc_cbasp-boart_ag,
p_waers TO lc_cbasp-waers,
'A' TO lc_cbasp-setl_mth,
'B' TO lc_cbasp-setl_typ,
'A2' TO lc_cbasp-ident,
'E' TO lc_cbasp-setlm,
'ZPDA' TO lc_cbasp-pargr,
'X' TO lc_cbasp-npric,
'LF' TO lc_cbasp-stprl,
lc_rule-lifnr TO lc_cbasp-stpar,
lc_rule-contract_rev TO lc_cbasp-rvnum,
'I' TO lc_cbasp-updkz.
CONCATENATE: blank_agree_key
lc_rule-lifnr INTO lc_konh-vakey.
MOVE: lc_rule-lifnr TO lc_konp-lifnr.
WHEN 'A703'.
CONCATENATE: blank_agree_key
lc_rule-kunnr INTO lc_konh-vakey.
MOVE lc_rule-kunnr TO lc_komg-komg-kunnr.
WHEN 'A709'.
CONCATENATE: blank_agree_key
lc_rule-zzprodh1 lc_rule-zzprodh2 lc_rule-zzprodh3
lc_rule-zzprodh4 lc_rule-zzprodh5 INTO lc_konh-vakey.
CONCATENATE: lc_rule-zzprodh1 lc_rule-zzprodh2 lc_rule-zzprodh3
lc_rule-zzprodh4 lc_rule-zzprodh5 INTO lc_komg-komg-prodh.
WHEN 'A710'.
CONCATENATE: blank_agree_key
lc_rule-matkl INTO lc_konh-vakey.
MOVE lc_rule-matkl TO lc_komg-komg-matkl.
WHEN 'A711'.
CONCATENATE: blank_agree_key
lc_rule-matnr INTO lc_konh-vakey.
MOVE lc_rule-matnr TO lc_komg-komg-matnr.
IF lc_rule-kschl = 'ZPPL'.
MOVE: 'C' TO lc_konp-krech,
'CAD' TO lc_konp-konwa.
lc_konp-kbetr = lc_rule-net_po_price * 1.
ENDIF.
WHEN 'A717'.
WHEN 'A718'.
CONCATENATE: blank_agree_key
lc_rule-zzextwg INTO lc_konh-vakey.
MOVE lc_rule-zzextwg TO lc_komg-komg-zzextwg.
WHEN 'A719'.
CONCATENATE: blank_agree_key
lc_rule-werks INTO lc_konh-vakey.
MOVE lc_rule-werks TO lc_komg-komg-werks.
WHEN 'A721'.
CONCATENATE: blank_agree_key
lc_rule-kunnr lc_rule-werks INTO lc_konh-vakey.
MOVE: lc_rule-kunnr TO lc_konp-kunnr,
lc_rule-kunnr TO lc_komg-komg-kunnr.
WHEN 'A722'.
CONCATENATE: blank_agree_key
lc_rule-vkbur INTO lc_konh-vakey.
MOVE lc_rule-vkbur TO lc_komg-komg-vkbur.
WHEN 'A724'.
CONCATENATE: blank_agree_key
lc_rule-kunnr lc_rule-vkbur INTO lc_konh-vakey.
MOVE: lc_rule-kunnr TO lc_konp-kunnr,
lc_rule-kunnr TO lc_komg-komg-kunnr,
lc_rule-vkbur TO lc_komg-komg-vkbur.
ENDCASE.
MOVE: 'A' TO lc_konh-kvewe,
lc_rule-tablnam+1(3) TO lc_konh-kotabnr,
lc_rule-kappl TO lc_konh-kappl,
lc_rule-kschl TO lc_konh-kschl.
REPLACE ALL OCCURRENCES OF '~' IN lc_konh-vakey WITH ' '.
APPEND lc_konh TO lt_konh.
CLEAR lc_konh.
*--- Add in the KONP.Do we need to add
MOVE: lc_rule-kappl TO lc_konp-kappl,
lc_rule-kschl TO lc_konp-kschl,
'G' TO lc_konp-krech.
IF lc_rule-kschl+3(1) = '%'.
MOVE: 'A' TO lc_konp-krech,
'%' TO lc_konp-konwa.
lc_konp-kbetr = lc_rule-rebate_perc * 1.
ENDIF.
APPEND lc_konp TO lt_konp. CLEAR lc_konp.
APPEND lc_komg TO lt_komg. CLEAR lc_komg.
ENDLOOP.
IF lc_updt = 'I'.
CALL FUNCTION '/IRM/IPCB_AGREEMENT_CREATE'
EXPORTING
I_MESSAGES_DISPLAY = ' '
I_SAVE_MESSAGES = ' '
I_COMMIT_WORK = 'X'
I_CALL_FROM_WS = ' '
is_kona = lc_kona
is_cbasp = lc_cbasp
it_cbapr = lt_cbapr
it_cbadt = lt_cbadt
it_cbafs = lt_cbafs
it_cbacn = lt_cbacn
it_cbacl = lt_cbacl
it_cbtpv = lt_cbtpv
it_texts = lt_texts
it_cbasd = lt_cbasd
IMPORTING
es_agreement = lc_agreement
e_log_number = lc_e_log_number
TABLES
t_messages = lt_messages
CHANGING
CT_VAKE = lt_vake
ct_konh = lt_konh
ct_konp = lt_konp
CT_KONW = lt_konw
CT_KONM = lt_konm
ct_komg = lt_komg
CT_USER_DATA = lt_usr_data
EXCEPTIONS
no_documents_to_process = 1
no_authorization = 2
creation_failed = 3
new_pricing_not_maitained = 4
OTHERS = 5.
IF sy-subrc <> 0.
Implement suitable error handling here
ELSE.
MOVE: lc_agreement-knuma_ag TO po_agreement,
lc_agreement-knuma_ag TO lc_kona-knuma.
ENDIF.
APPEND LINES OF lt_messages TO gt_messages.
ELSE.
MOVE-CORRESPONDING kona TO lc_kona.
ENDIF.
LOOP AT lt_konh ASSIGNING <konh_line>.
MOVE lc_kona-knuma TO <konh_line>-vakey+0(10).
move '&' to <konh_line>-knumh+0(1).
ENDLOOP.
LOOP AT lt_konp ASSIGNING <konp_line>.
MOVE lc_kona-knuma TO <konp_line>-vakey+0(10).
move '&' to <konh_line>-knumh+0(1).
ENDLOOP.
lc_kona-updkz = 'U'.
lc_cbasp-updkz = 'U'.
CLEAR lt_messages.
CALL FUNCTION '/IRM/IPCB_AGREEMENT_CHANGE'
EXPORTING
I_MESSAGES_DISPLAY = ' '
I_SAVE_MESSAGES = ' '
I_COMMIT_WORK = 'X'
I_INIT_DATA = 'X'
is_kona = lc_kona
is_cbasp = lc_cbasp
it_cbapr = lt_cbapr
it_cbadt = lt_cbadt
it_cbafs = lt_cbafs
it_cbacl = lt_cbacl
it_cbacn = lt_cbacn
IT_FIELDS =
it_texts = lt_texts
IMPORTING
e_log_number = lc_e_log_number
TABLES
t_messages = lt_messages
CHANGING
cs_agreement = lc_agreement
CT_VAKE = lt_vake
ct_konh = lt_konh
ct_konp = lt_konp
CT_KONW = lt_konw
CT_KONM = lt_konm
ct_komg = lt_komg
CT_USER_DATA = lt_usr_data
EXCEPTIONS
no_documents_to_process = 1
no_authorization = 2
change_failed = 3
agreement_locked = 4
OTHERS = 5.
IF sy-subrc <> 0.
Implement suitable error handling here
ENDIF.
APPEND LINES OF lt_messages TO gt_messages.
ENDFORM. " CREATE_AGREEMENT
Maybe you are looking for
-
How to set values to unniverse prompts through java
Hi I am using JAVA -BOSDK to access reports from infoview. I have a problem when any universe level prompt is present in the report. I am able to retrieve it through java when i say documentInstance.getPrompts() and when i set values to this prompt b
-
Where do i find questions relating to Insurance and specifically for FS-CD.
-
Need replacement FM for the Obsolete FMs provided
Hi, Can someone tell me what are all the FM which can be used as replacement for the following FM's. ADDRESS_MAINTAIN ADDRESS_UPDATE_OLD DD_PR_REDEFINE GRAPH_DIALOG HELPSCREEN_NA_CREATE STRING_SPLIT Thanks in advan
-
When I open the browser I get a extra tab besides my home page that opens. I only want my home page to open.
-
Elements 12 organiser has changed all raw files to jpeg - how do I get raw files back?
Cannot edit raw files as Elements (12) seems to have changed them all to jpegs - can anyone let me know how to get raw files back?