How to use the FP-DO-AC120 module on Field Point?

Hi,
I am trying to use a FP-DO-AC120 (discrete output module) as a relay to switch of an equipment I control via Field Point 2000. This FP-DO-AC120 is connected to a FP-TB10 terminal base along with some other modules. When I try to use the “write” function on MAX (Measurement and Automation Explorer), it doesn’t allow me to do so and the “this item is read only” pops up. Checking the channel type to where the module is plugged in it shows that is a discrete input channel. I’ve tried to change it to a discrete output type, but when I do so, the status of that slot is “empty base or terminal”. I don’t understand what is going on here. Could anyone please advise?
Thanks for the help.
Adriana

Adriana,
I found a similar discussion forum thread that addresses the same issue.
My FP-DO-AC120 module is being read as DI in FP Explorer, Why?
This is an older post, so keep in mind that all the functionality of FieldPoint Explorer is now included in MAX.
Otis
Training and Certification
Product Support Engineer
National Instruments

Similar Messages

  • How to use the text module in script

    hi,
            i script how to use the text modules and how to write the code  in layout of the script?

    Hi,
    You canr use text modules in script. You have to use standard texts .
    Standard text are maintained in SO10 transaction.
    you can create translation text for other languages also . So based on logon language it will print translation text.
    go to SO10
    give textname it say Ztextname  id as ST and language as EN
    say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
    so now you have created a text called ztextname which you can use in your script.
    Inorder to insert the texts in your script do as below
    go to any window editor and   select path
    Insert->texts->symbols->standard symbols
    then you will get popup  in which you have to mention all the parameters that you have created earlier.
    after inserting just change language EN to sy-langu
    Reward points if useful
    About text elements Sravan already given some informatiomn
    Regards,
    Nageswar

  • How to use the structure in the EXIT_SAPMM06E_013 function module

    Hello Experts,
    Please guide me how to use the structure defined in function modules under  table tab in the driver program for smart form to fetch the data. Please post some sample code if available.
    Best Regards,
    Sandesh.Sreyamsh

    Can you please elaborate little bit more what is the actual requirement?

  • How to use the Bluetooth module natively in Parallels Desktop

    link to the instructions on how to enable bluetooth natively in parallels:
    http://www.mattiouz.com/blog/2007/04/13/how-to-use-the-built-in-mac-bluetooth-in -windows-under-parallels/
    link to the .exe that installs the apple driver for the bluetooth module needed in parallels: http://www.mattiouz.com/download/AppleBluetoothInstaller.exe
    now my bluetooth is accessible under parallels 3.0.5158. i scanned with a bluetooth netowrk scanner and i had no problems connecting to my treo 650.
    i took my some time to find the info but @ last i found it;-)
    Message was edited by: smokeonit

    Hi,
    You canr use text modules in script. You have to use standard texts .
    Standard text are maintained in SO10 transaction.
    you can create translation text for other languages also . So based on logon language it will print translation text.
    go to SO10
    give textname it say Ztextname  id as ST and language as EN
    say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
    so now you have created a text called ztextname which you can use in your script.
    Inorder to insert the texts in your script do as below
    go to any window editor and   select path
    Insert->texts->symbols->standard symbols
    then you will get popup  in which you have to mention all the parameters that you have created earlier.
    after inserting just change language EN to sy-langu
    Reward points if useful
    About text elements Sravan already given some informatiomn
    Regards,
    Nageswar

  • How to use the function module 'HR_ES_FEATURE_BACKFIELD'

    Hi,
    How to use the function module 'HR_ES_FEATURE_BACKFIELD'?
    I need the usage from both technical as well as functional point of view.
    What is the use of this function module and technically how it is to be used to retrieve a feature for a particular employee.

    hey iam from functional side can u be little bit clear of that feature
    thanks
    sikindar

  • How to use the Function module 'BAPI_APPRAISAL_GETDETAIL'

    hello friends,
    I have to create the report which displays appraisee name, appraiser name,reviewer name and result.Using BAPI_APPRAISAL_GETDETAIL we can get the above all.But i don't know how to use the above function module.If anyone have  used in their program could you please send me or anyone have idea how to do that Please help.It is very Urgent Help me.
    Thanks in advance,
    Regards,
    Ashok.

    Hi,
    I do not hae the code but i can tell you how you use the FM and get the required data, please follow the below mentioned steps:
    1) In this Bapi you need to pass the Plan verison and Object Id data in the BAPI Import parameters and while passing the these values need to decalra the data variables same (of use the same reference fields as they are in Bapi import fields)as they are Bapi importing data fields.
    2) decalre the Internal Table structure as they are in the Export and Table parameters.
    3) Assign the decalred Import and Tables structures to the BAPI FM.
    4) once the Bapi is run with the Import parameters data the Apprisal data  and Apprisee data will returened in the import and table structures and also return value wll be imported.
    5) now using the Structures which are in Import and Table decalrations in the FM you can retrieve the data by reading them.
    Do let me know if you need any more details in this regard.
    Raghotham Reddy.
    If you find this is the right solution then allocate reward point.

  • How to use the function module CONVERSION_FACTOR_GET?

    Hi Experts,
    I have to use convert the value of a field from units 'HL' to 'HHL'. According to me, we can use the function module CONVERSION_FACTOR_GET. However, i am not able to know how to use it?
    Can anyone explain how to use the FM, i mean what should be the importing and exporting parameter.... For recap, i need to convert HL to HHL, for example 3 HL to 0.03 HHL.
    Please help.
    Rewards for sure!
    Thanks in advance.
    Aksh

    Hi
    If it is Unit Conversion better use the following Fun modules
    UNIT_CONVERSION_SIMPLE
    MD_CONVERT_MATERIAL_UNIT
    goto SE37 first and execute them by entering some value and then use it in the code after confirming it
    Regards
    Anji

  • How to use the function module ....

    hi
    how to use the function module ssf_function_module_name in smartforms

    Hi..
    If you are using this Function module, you can get the generated function module name of smartform dynamically. It is good progrmaming practice to get the fucntion module name dynamically because there might be some problems if you are hard coding in program.
    This will return the name of the function module and then from the exporting parameters you can use the fucntion module name to pass parameters to Smartforms.
    Check this link.I am expalining here how to use this function module.
    https://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=36109&version=2
    Calling SMARTFORMS from your ABAP program
    REPORT ZSMARTFORM.
    Calling SMARTFORMS from your ABAP program.
    Collecting all the table data in your program, and pass once to SMARTFORMS
    SMARTFORMS
    Declare your table type in :-
    Global Settings -> Form Interface
    Global Definintions -> Global Data
    Main Window -> Table -> DATA
    Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
    http://sapr3.tripod.com
    TABLES: MKPF.
    DATA: FM_NAME TYPE RS38L_FNAM.
    DATA: BEGIN OF INT_MKPF OCCURS 0.
    INCLUDE STRUCTURE MKPF.
    DATA: END OF INT_MKPF.
    SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
    SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
    MOVE-CORRESPONDING MKPF TO INT_MKPF.
    APPEND INT_MKPF.
    ENDSELECT.
    At the end of your program.
    Passing data to SMARTFORMS
    call function 'SSF_FUNCTION_MODULE_NAME'
    exporting
    formname = 'ZSMARTFORM'
    VARIANT = ' '
    DIRECT_CALL = ' '
    IMPORTING
    FM_NAME = FM_NAME
    EXCEPTIONS
    NO_FORM = 1
    NO_FUNCTION_MODULE = 2
    OTHERS = 3.
    if sy-subrc <> 0.
    WRITE: / 'ERROR 1'.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    call function FM_NAME
    EXPORTING
    ARCHIVE_INDEX =
    ARCHIVE_INDEX_TAB =
    ARCHIVE_PARAMETERS =
    CONTROL_PARAMETERS =
    MAIL_APPL_OBJ =
    MAIL_RECIPIENT =
    MAIL_SENDER =
    OUTPUT_OPTIONS =
    USER_SETTINGS = 'X'
    IMPORTING
    DOCUMENT_OUTPUT_INFO =
    JOB_OUTPUT_INFO =
    JOB_OUTPUT_OPTIONS =
    TABLES
    GS_MKPF = INT_MKPF
    EXCEPTIONS
    FORMATTING_ERROR = 1
    INTERNAL_ERROR = 2
    SEND_ERROR = 3
    USER_CANCELED = 4
    OTHERS = 5.
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    <b>Reward points if useful</b>
    Regards
    Ashu

  • How to use the function module /IRM/IPBB_AGREEMENT_CREATE.

    Hi all,
    Please help me how to use the function module /IRM/IPBB_AGREEMENT_CREATE.
    It is a Vistex fuction module which is used to create Sales contract in SAP-Vistex. If anyone has use the function module and do have the sample code please share it.
    Thanks.

    FORM create_agreement TABLES pt_agreement
                                           CHANGING po_agreement .
      CONSTANTS: c_strt_knumh TYPE knumh VALUE '0000000000'.
      DATA: lc_kona  TYPE /irm/s_gkona,
            lc_cbasp TYPE /irm/s_ipcbasp,
          lt_cbapr TYPE /irm/t_ipcbapr,         "Partners
          lc_cbapr TYPE /irm/s_ipcbapr,
          lt_cbadt TYPE  /irm/t_ipcbadt,        "Dates
          lc_cbadt TYPE  /irm/s_ipcbadt,
          lt_cbafs TYPE  /irm/t_ipcbafs,
          lc_cbafs TYPE  /irm/s_ipcbafs,
          lt_cbacn TYPE  /irm/t_ipcbacn,
          lc_cbacn TYPE  /irm/s_ipcbacn,
          lt_cbacl TYPE  /irm/t_ipcbacl,
          lc_cbacl TYPE  /irm/s_ipcbacl,
          lt_cbtpv TYPE  /irm/t_ipagtpv,
          lc_cbtpv TYPE  /irm/s_ipagtpv,
          lt_texts TYPE  text_lh,
          lc_texts TYPE  itclh,
          lt_cbasd TYPE  /irm/t_ipcbasd,
          lc_cbasd TYPE  /irm/s_ipcbasd,
          lc_agreement    TYPE  /irm/s_ipcbasp_doc,
          lc_e_log_number TYPE  balognr,
          lt_messages     TYPE  /irm/t_gprolog.
      DATA: lt_vake      TYPE  cond_vakevb_t,
            lc_vake      TYPE LINE OF cond_vakevb_t,
            lt_konh      TYPE  /irm/t_gkonh,
            lc_konh      TYPE LINE OF /irm/t_gkonh,
            lt_konp      TYPE  /irm/t_gkonp,
            lc_konp      TYPE LINE OF /irm/t_gkonp,
            lt_konw      TYPE  /irm/t_gkonwu,
            lc_konw      TYPE LINE OF /irm/t_gkonwu,
            lt_konm      TYPE  /irm/t_gkonmu,
            lc_konm      TYPE LINE OF  /irm/t_gkonmu,
            lt_komg      TYPE  /irm/t_gkomg_index,
            lc_komg      TYPE LINE OF /irm/t_gkomg_index,
            lt_user_data TYPE  /irm/t_gpraxfu_index,
            lc_user_data TYPE LINE OF /irm/t_gpraxfu_index.
      DATA: lc_updt(1) TYPE c.
      DATA: lc_knumh TYPE knumh.
      DATA: BEGIN OF lc_str_knumh,
             hd(2) TYPE c VALUE '$$',
             inc_num(8) TYPE c,
            END OF lc_str_knumh.
      DATA: blank_agree_key TYPE knuma VALUE '~~~~~~~~~~'.
      FIELD-SYMBOLS <konh_line> LIKE LINE OF lt_konh.
      FIELD-SYMBOLS <konp_line> LIKE LINE OF lt_konp.
      DATA: lc_rule TYPE type_key_rule.
      READ TABLE pt_agreement INTO lc_rule INDEX 1.
    SELECT SINGLE * FROM  kona
            WHERE  vkorg   = lc_rule-vkorg
            AND    vtweg   = '10'
            AND    spart   = '10'
            AND    boart   = 'ZPS1'
            AND    botext  = lc_rule-sap_agkey.
    IF sy-subrc = 0.
       lc_updt = 'U'.
    ELSE.
      lc_updt = 'I'.
    ENDIF.
      LOOP AT pt_agreement INTO lc_rule.
        MOVE sy-tabix TO lc_str_knumh-inc_num.
        CONDENSE lc_str_knumh-inc_num NO-GAPS.
        WHILE lc_str_knumh-inc_num+7(1) = ' '.
          CONCATENATE '0' lc_str_knumh-inc_num INTO lc_str_knumh-inc_num.
          CONDENSE lc_str_knumh-inc_num NO-GAPS.
        ENDWHILE.
        CONCATENATE '$$' lc_knumh INTO lc_knumh.
        MOVE lc_str_knumh TO lc_knumh.
       MOVE c_strt_knumh TO lc_knumh.
        CLEAR: lc_konh, lc_konp, lc_komg.
        MOVE: lc_rule-vkorg    TO lc_komg-komg-vkorg,
              '10'             TO lc_komg-komg-vtweg,
              '10'             TO lc_komg-komg-spart,
              p_waers          TO lc_komg-komg-waerk,
              '1300'           TO lc_komg-komg-bukrs,
              lc_rule-lifnr    TO lc_komg-komg-lifnr,
              lc_knumh         TO lc_komg-knumh,
              lc_knumh         TO lc_konh-knumh,
              lc_knumh         TO lc_konp-knumh,
              lc_rule-datab    TO lc_konh-datab,
              lc_rule-datbi    TO lc_konh-datbi.
        CASE lc_rule-tablnam.
          WHEN 'A701'.                   "Every Agreement will have a A701 rule -
            "Therefore we acn setup the header using A701
            MOVE: 'New       '  TO lc_kona-knuma,
                  lc_rule-vkorg TO lc_kona-vkorg,
                  '10'          TO lc_kona-vtweg,
                  '10'          TO lc_kona-spart,
                  'ZPS1'        TO lc_kona-boart,
                  'C'           TO lc_kona-abtyp,
                  'V'           TO lc_kona-kappl,
                  p_waers       TO lc_kona-waers,
                  lc_rule-knuma_ag TO lc_kona-abrex,
                  'ZPS2'        TO lc_kona-kobog,
                  lc_rule-datab TO lc_kona-datab,
                  lc_rule-datbi TO lc_kona-datbi,
                  lc_rule-sap_agkey TO lc_kona-botext,
                  '1300'        TO lc_kona-bukrs,
                  'I'           TO lc_kona-updkz.
            MOVE: 'New       '  TO lc_cbasp-knuma_ag,
                  'ZPS1'        TO lc_cbasp-boart_ag,
                  p_waers       TO lc_cbasp-waers,
                  'A'           TO lc_cbasp-setl_mth,
                  'B'           TO lc_cbasp-setl_typ,
                  'A2'          TO lc_cbasp-ident,
                  'E'           TO lc_cbasp-setlm,
                  'ZPDA'        TO lc_cbasp-pargr,
                  'X'           TO lc_cbasp-npric,
                  'LF'          TO lc_cbasp-stprl,
                  lc_rule-lifnr TO lc_cbasp-stpar,
                  lc_rule-contract_rev  TO lc_cbasp-rvnum,
                  'I'           TO lc_cbasp-updkz.
            CONCATENATE: blank_agree_key
                   lc_rule-lifnr        INTO lc_konh-vakey.
            MOVE: lc_rule-lifnr TO lc_konp-lifnr.
          WHEN 'A703'.
            CONCATENATE: blank_agree_key
                         lc_rule-kunnr      INTO lc_konh-vakey.
            MOVE lc_rule-kunnr TO lc_komg-komg-kunnr.
          WHEN 'A709'.
            CONCATENATE: blank_agree_key
            lc_rule-zzprodh1  lc_rule-zzprodh2  lc_rule-zzprodh3
                   lc_rule-zzprodh4  lc_rule-zzprodh5 INTO lc_konh-vakey.
            CONCATENATE: lc_rule-zzprodh1  lc_rule-zzprodh2  lc_rule-zzprodh3
                   lc_rule-zzprodh4  lc_rule-zzprodh5 INTO lc_komg-komg-prodh.
          WHEN 'A710'.
            CONCATENATE: blank_agree_key
                lc_rule-matkl   INTO lc_konh-vakey.
            MOVE lc_rule-matkl TO lc_komg-komg-matkl.
          WHEN 'A711'.
            CONCATENATE: blank_agree_key
                 lc_rule-matnr   INTO lc_konh-vakey.
            MOVE lc_rule-matnr TO lc_komg-komg-matnr.
            IF lc_rule-kschl = 'ZPPL'.
              MOVE: 'C'              TO lc_konp-krech,
                    'CAD'              TO lc_konp-konwa.
              lc_konp-kbetr = lc_rule-net_po_price * 1.
            ENDIF.
          WHEN 'A717'.
          WHEN 'A718'.
            CONCATENATE: blank_agree_key
                 lc_rule-zzextwg INTO lc_konh-vakey.
            MOVE lc_rule-zzextwg TO lc_komg-komg-zzextwg.
         WHEN 'A719'.
           CONCATENATE: blank_agree_key
                lc_rule-werks INTO lc_konh-vakey.
           MOVE lc_rule-werks TO lc_komg-komg-werks.
         WHEN 'A721'.
           CONCATENATE: blank_agree_key
                 lc_rule-kunnr lc_rule-werks INTO lc_konh-vakey.
           MOVE: lc_rule-kunnr TO lc_konp-kunnr,
                 lc_rule-kunnr TO lc_komg-komg-kunnr.
          WHEN 'A722'.
            CONCATENATE: blank_agree_key
                         lc_rule-vkbur INTO lc_konh-vakey.
            MOVE lc_rule-vkbur TO lc_komg-komg-vkbur.
          WHEN 'A724'.
            CONCATENATE: blank_agree_key
                          lc_rule-kunnr lc_rule-vkbur INTO lc_konh-vakey.
            MOVE: lc_rule-kunnr TO lc_konp-kunnr,
                  lc_rule-kunnr TO lc_komg-komg-kunnr,
                  lc_rule-vkbur TO lc_komg-komg-vkbur.
        ENDCASE.
        MOVE: 'A'                  TO lc_konh-kvewe,
              lc_rule-tablnam+1(3) TO lc_konh-kotabnr,
              lc_rule-kappl        TO lc_konh-kappl,
              lc_rule-kschl        TO lc_konh-kschl.
        REPLACE ALL OCCURRENCES OF '~' IN lc_konh-vakey WITH ' '.
        APPEND lc_konh TO lt_konh.
        CLEAR lc_konh.
    *--- Add in the KONP.Do we need to add
        MOVE: lc_rule-kappl        TO lc_konp-kappl,
              lc_rule-kschl        TO lc_konp-kschl,
              'G'                  TO lc_konp-krech.
        IF lc_rule-kschl+3(1) = '%'.
          MOVE: 'A'              TO lc_konp-krech,
                '%'              TO lc_konp-konwa.
          lc_konp-kbetr = lc_rule-rebate_perc * 1.
        ENDIF.
        APPEND lc_konp TO lt_konp. CLEAR lc_konp.
        APPEND lc_komg TO lt_komg. CLEAR lc_komg.
      ENDLOOP.
      IF  lc_updt = 'I'.
        CALL FUNCTION '/IRM/IPCB_AGREEMENT_CREATE'
          EXPORTING
          I_MESSAGES_DISPLAY        = ' '
          I_SAVE_MESSAGES           = ' '
          I_COMMIT_WORK             = 'X'
          I_CALL_FROM_WS            = ' '
            is_kona                   = lc_kona
            is_cbasp                  = lc_cbasp
            it_cbapr                  = lt_cbapr
            it_cbadt                  = lt_cbadt
            it_cbafs                  = lt_cbafs
            it_cbacn                  = lt_cbacn
            it_cbacl                  = lt_cbacl
            it_cbtpv                  = lt_cbtpv
            it_texts                  = lt_texts
            it_cbasd                  = lt_cbasd
          IMPORTING
            es_agreement              = lc_agreement
            e_log_number              = lc_e_log_number
          TABLES
            t_messages                = lt_messages
         CHANGING
          CT_VAKE                   = lt_vake
          ct_konh                   = lt_konh
          ct_konp                   = lt_konp
          CT_KONW                   = lt_konw
          CT_KONM                   = lt_konm
           ct_komg                   = lt_komg
          CT_USER_DATA              = lt_usr_data
          EXCEPTIONS
            no_documents_to_process   = 1
            no_authorization          = 2
            creation_failed           = 3
            new_pricing_not_maitained = 4
            OTHERS                    = 5.
        IF sy-subrc <> 0.
    Implement suitable error handling here
        ELSE.
          MOVE: lc_agreement-knuma_ag TO po_agreement,
                lc_agreement-knuma_ag TO lc_kona-knuma.
        ENDIF.
        APPEND LINES OF lt_messages TO gt_messages.
      ELSE.
        MOVE-CORRESPONDING kona TO lc_kona.
      ENDIF.
      LOOP AT lt_konh ASSIGNING <konh_line>.
        MOVE lc_kona-knuma TO <konh_line>-vakey+0(10).
       move '&'           to <konh_line>-knumh+0(1).
      ENDLOOP.
      LOOP AT lt_konp ASSIGNING <konp_line>.
       MOVE lc_kona-knuma TO <konp_line>-vakey+0(10).
        move '&'           to <konh_line>-knumh+0(1).
      ENDLOOP.
      lc_kona-updkz = 'U'.
      lc_cbasp-updkz = 'U'.
      CLEAR lt_messages.
      CALL FUNCTION '/IRM/IPCB_AGREEMENT_CHANGE'
        EXPORTING
        I_MESSAGES_DISPLAY      = ' '
        I_SAVE_MESSAGES         = ' '
        I_COMMIT_WORK           = 'X'
        I_INIT_DATA             = 'X'
          is_kona                 = lc_kona
          is_cbasp                = lc_cbasp
         it_cbapr                = lt_cbapr
         it_cbadt                = lt_cbadt
         it_cbafs                = lt_cbafs
         it_cbacl                = lt_cbacl
         it_cbacn                = lt_cbacn
        IT_FIELDS               =
         it_texts                = lt_texts
       IMPORTING
         e_log_number            = lc_e_log_number
         TABLES
           t_messages              = lt_messages
        CHANGING
          cs_agreement            = lc_agreement
        CT_VAKE                 = lt_vake
          ct_konh                 = lt_konh
          ct_konp                 = lt_konp
        CT_KONW                 = lt_konw
        CT_KONM                 = lt_konm
          ct_komg                 = lt_komg
        CT_USER_DATA            = lt_usr_data
        EXCEPTIONS
          no_documents_to_process = 1
          no_authorization        = 2
          change_failed           = 3
          agreement_locked        = 4
          OTHERS                  = 5.
    IF sy-subrc <> 0.
    Implement suitable error handling here
    ENDIF.
      APPEND LINES OF lt_messages TO gt_messages.
    ENDFORM.                    " CREATE_AGREEMENT

  • How to Use the Function Module 'BAPI_BUSPROCESSND_CHANGEMULTI'

    Dear Experts,
             Can anyone Explain me how to Use the Function Module 'BAPI_BUSPROCESSND_CHANGEMULTI'.My Requirement is i want to change the Partners of the Service Order.It is Very Urgent Requirement Please Help me.
    Thanks & Regards,
    Ashok.

    Hi,
    For service order you can use FM 'BAPI_ACTIVITYCRM_CHANGEMULTI' as it is much easier to use.
    Sample code is below. You can use that:
    "fill the details of partner which is
              "to be added as main partner or in place of Interaction Agent
              wa_partner_new-ref_guid = w_guid_ref.
              wa_partner_new-ref_handle = '0000000000'.
              wa_partner_new-ref_kind = 'A'.
              wa_partner_new-kind_of_entry = wa_partner-kind_of_entry.
              wa_partner_new-ref_partner_handle = '0000'.
              wa_partner_new-ref_partner_fct = 'Z_IA'.
    "wa_partner-partner_no : New partner no.
              wa_partner_new-ref_partner_no = wa_partner-partner_no.
              wa_partner_new-ref_no_type = wa_partner-ref_no_type.
              wa_partner_new-ref_display_type = wa_partner-ref_display_type.
              wa_partner_new-display_type = 'BP'.
              wa_partner_new-no_type = 'BP'.
              wa_partner_new-partner_fct = 'Z_IA'.
    "w_partner_no : Old partner no. which is to be changed
              wa_partner_new-partner_no = w_partner_no.
              wa_partner_new-mainpartner = 'X'.
              INSERT wa_partner_new INTO TABLE it_partner_new.
              wa_partner_newx-display_type = 'X'.
              wa_partner_newx-no_type = 'X'.
              wa_partner_newx-partner_fct = 'X'.
              wa_partner_newx-partner_no = 'X'.
              wa_partner_newx-mainpartner = 'X'.
              INSERT wa_partner_newx INTO TABLE it_partner_newx.
      IF it_partner_new[] IS NOT INITIAL AND it_partner_newx[] IS NOT INITIAL.
        "maintain all changes to be done
        CALL FUNCTION 'BAPI_ACTIVITYCRM_CHANGEMULTI'
          TABLES
            partner  = it_partner_new
            partnerx = it_partner_newx.
        CLEAR : wa_guid1.
        REFRESH : it_guid1.
        wa_guid1-guid = w_guid_ref.
        APPEND wa_guid1 TO it_guid1.
        "save the changes
        CALL FUNCTION 'BAPI_ACTIVITYCRM_SAVE'
          TABLES
            objects_to_save = it_guid1.
        "commit the transaction
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
      ENDIF.
    Reply fro any further help.
    Please reward points if helpful.
    Regards,
    Ashlesha

  • I need this file "How to Use the Content Conversion Module in JMS Adapter"

    Can someone send me this file:
    "How to Use the Content Conversion Module in JMS Adapter"
    I am not able to find it.
    Thanks
    Antonello

    pls refer guide
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-adapters/how%20to%20use%20the%20content%20conversion%20module%20with%20xi%203.0%20j2ee%20jms%20adapter.pdf
    Regards,
    Swetha.

  • How to use Logical database in function module?

    I will create a function module in HR.
    but how to use Logical database  in function module ?  Logical database PNP always show screen.in function (RFC) code , it is a matter.

    You cannot attach the LDB to the main program of the function group.
    - So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
    - Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
    - Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
    Regards

  • How to use the Calculated attibute in view object

    Hi,
    I have a view object query with the calculated attribute name as 'TRANCODE' in the below sql.This query works for the initial page loading.
    After the page gets loaded, there is a search section in the same page at the top.
    Here i will have to build the whereclause to the same query and retrieve the values.
    i am using jDeveloper 10.1.3.1, with adf and jHeadstart.
    Can some one tell as how to use the calculated attribute TRANCODE in whereclause?
    SELECT /*+ first_rows(10) */
    BatchCntl.FILE_CNTL_ID,
    CASE WHEN chk_bit(Entry.ENTRY_FLAGS, 2)='Y' OR Entry.ENTRY_SUBSTATUS = 'D' OR Entry.ENTRY_SUBSTATUS = 'J'
    THEN
    CASE eeh.TRAN_CODE
    WHEN '21' THEN 'C'
    WHEN '22' THEN 'C'
    WHEN '31' THEN 'C'
    WHEN '32' THEN 'C'
    WHEN '26' THEN 'D'
    WHEN '27' THEN 'D'
    WHEN '36' THEN 'D'
    WHEN '37' THEN 'D'
    ELSE eeh.TRAN_CODE
    END
    ELSE
    CASE Entry.TRAN_CODE
    WHEN '21' THEN 'C'
    WHEN '22' THEN 'C'
    WHEN '31' THEN 'C'
    WHEN '32' THEN 'C'
    WHEN '26' THEN 'D'
    WHEN '27' THEN 'D'
    WHEN '36' THEN 'D'
    WHEN '37' THEN 'D'
    ELSE Entry.TRAN_CODE
    END
    END AS TRANCODE,
    FROM Batch_Cntl BatchCntl, Entry, ENTRY_EDIT_HIST eeh
    WHERE (BatchCntl.BATCH_TYPE = 'E')
    AND (BatchCntl.BATCH_STATUS in ('A','D','R','P'))
    AND entry.in_batch_cntl_id = BatchCntl.BATCH_CNTL_ID
    and Entry.fi_rt = eeh.fi_rt (+)
    and Entry.entry_id = eeh.entry_id (+)
    AND (Entry.ENTRY_STATUS in ('A','D','R','P'))
    ORDER BY BatchCntl.BATCH_CNTL_ID, Entry.entry_id
    regards
    Raj.

    Let's say your application module is com.yourcompany.someapp.services.MyService, and let's say you authored a method like the following in the MyServiceImpl.java file:
      public void doSomething(int i, String s) {
      }and you exposed this AM custom method using the AM editor.
    BC4J design time will automatically create you the com.yourcompany.someapp.services.common.MyService interface that will look like this if you go look at the source code:
    package com.yourcompany.someapp.services.common;
    import oracle.jbo.ApplicationModule;
    public interface MyService extends ApplicationModule {
      public void doSomething(int i, String s);
    }To use your custom method from a client, just cast your ApplicationModule to your custom interface like this:
    import com.yourcompany.someapp.services.common.MyService;
      MyService mySvc = (MyService)yourAM;
      mySvc.doSomething(1,"foo");

  • How to use the "out" parameter in idl

    hello.idl:
    module HelloApp
    interface Hello
    string sayHello();
    void getPass(in string name,out string pass);
    HelloServer:
    public class HelloServer
    class HelloServant extends _HelloImplBase
    public void getPass(String name,org.omg.CORBA.StringHolder pass)
    System.out.println("Server pass = " + pass);
    if (name.equals("lxh"))
    pass = new org.omg.CORBA.StringHolder("1234");
    if (name.equals("cbj"))
    pass = new org.omg.CORBA.StringHolder("5678");
    HelloClient:
    public class HelloClient
    public static void main(String args[])
    try{
    org.omg.CORBA.StringHolder Pass = null;
    if (args.length == 1)
    System.out.println("Client pass = " + args[0]);
    helloRef.getPass(args[0],Pass);
    System.out.println(Pass);
    } catch(Exception e) {
    When I run client main method with parameter "lxh",I will get a error says the getPass() parameter which has given is wrong.
    How to use the out parameter in client?

    Does this error only occurs if you pass "lxh" or always?
    Did you try passing a StringHolder Object rather than a NULL Object?
    Perhaps you can post the error message!?

  • How to write the exceptions in function module

    dear all,
         how to write the exceptions in function modules with example.
    thanq
    jyothi

    Hi,
    Raising Exceptions
    There are two ABAP statements for raising exceptions. They can only be used in function modules:
    RAISE except.
    und
    MESSAGE.....RAISING except.
    The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
    If the calling program does not handle the exception
    · The RAISEstatement terminates the program and switches to debugging mode.
    · The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
    If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
    Source Code of READ_SPFLI_INTO_TABLE
    The entire source code of READ_SPFLI_INTO_TABLE looks like this:
    FUNCTION read_spfli_into_table.
    ""Local Interface:
    *" IMPORTING
    *" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
    *" EXPORTING
    *" VALUE(ITAB) TYPE SPFLI_TAB
    *" EXCEPTIONS
    *" NOT_FOUND
    SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
    IF sy-subrc NE 0.
    MESSAGE e007(at) RAISING not_found.
    ENDIF.
    ENDFUNCTION.
    The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
    Calling READ_SPFLI_INTO_TABLE
    The following program calls the function module READ_SPFLI_INTO_TABLE:
    REPORT demo_mod_tech_fb_read_spfli.
    PARAMETERS carrier TYPE s_carr_id.
    DATA: jtab TYPE spfli_tab,
    wa LIKE LINE OF jtab.
    CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
    EXPORTING
    id = carrier
    IMPORTING
    itab = jtab
    EXCEPTIONS
    not_found = 1
    OTHERS = 2.
    CASE sy-subrc.
    WHEN 1.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
    WHEN 2.
    MESSAGE e702(at).
    ENDCASE.
    LOOP AT jtab INTO wa.
    WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
    ENDLOOP.
    The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
    Or
    just have to decide what exceptions u want and under what conditions.
    then declarethese exeptions under the exceptions tab.
    in the source code of ur function module.
    if
    like this u can code .
    now when u call the function module in tme mainprogram.
    if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
    in the fm u can program these sy-subrc values and trigger the code for ur exception.
    Please reward if useful
    Regards,
    Ravi
    Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM

Maybe you are looking for